High-Power Bidirectional DC–DC Converter for Aerospace Applications
The DOI matches its Crossref record; 29 of the 31 references it cites were found in a registry or an index.
Abstract
This paper contributes to the steady-state analysis of the bidirectional dual active bridge (DAB) dc-dc converter by proposing a new model that produces equations for rms and average device currents, and rms and peak inductor/transformer currents. These equations are useful in predicting losses that occur in the devices and passive components and aid in the converter design. An analysis of zero-voltage switching (ZVS) boundaries for buck and boost modes while considering the effect of snubber capacitors on the DAB converter is also presented. The proposed model can be used to predict the converter efficiency at any desired operating point. The new model can serve as an important teaching-cum-research tool for DAB hardware design (devices and passive components selection), soft-switching-operating range estimation, and performance prediction at the design stage. The operation of the DAB dc-dc converter has been verified through extensive simulations. A DAB converter prototype was designed on the basis of the proposed model and was built for an aerospace energy storage application. Experimental results are presented to validate the new model for a 7 kW, 390/180 V, 20 kHz converter operation and the ZVS boundary operation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, a single-cell approach could be realized with the arise of SiC power semiconductor technology [28], [103].”
From State of the Art of Solid-State Transformers: Advanced Topologies, Implementation Issues, Recent Progress and Improvements (2020) · cites this paper as [28]
Citations
Cites
Performance characterization of a high-power dual active bridge DC-to-DC converter
Kheraluwala, M. N., Gascoigne, R. W., Divan, D. M., & Baumann, E. D. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175280 · Cited by 1,496
A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909248 · Cited by 780 · cited 2×
“Bidirectional power flow capability is a key feature of DAB dc–dc converters, permitting flexible interfacing to energy storage devices [15], [16].”
BackgroundInoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669 · cited 1×
“In [23], Inoue and Akagi validated DAB performance for next-generation power conversion systems using ultracapacitor-based technologies.”
BackgroundPwm control of dual active bridge: Comprehensive analysis and experimental verification
Jain, A. K., & Ayyanar, R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2070519 · Cited by 567 · cited 1×
“In [28] and [29], Jain and Ayyanar presented a comprehensive analysis of DAB converter pulse width modulated control; however, the authors discussed only harmonic analysis for transformer rms and peak currents and stated that the exact analysis would be complicated for each voltage conversion ratio.”
BackgroundSwitching Control Strategy to Minimize Dual Active Bridge Converter Losses
Oggier, G. G., GarcÍa, G. O., & Oliva, A. R. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2020902 · Cited by 514
Oggier, G. G., Garcia, G. O., & Oliva, A. R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2072966 · Cited by 498 · cited 1×
“Although various modes of operation of the DAB converter have been presented recently [20], [26], [28] for highpower operation, the square-wave mode is supposedly the best operating mode.”
MethodKrismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470 · cited 1×
“Although the DAB converter has an inherent soft-switching attribute, it is limited to a reduced operating range depending on voltage conversion ratio and output current [15], [17].”
BackgroundHigh-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411 · cited 1×
“This is a drawback for applications that operate mainly with variable or low loads as the overall converter efficiency is reduced [18]–[21].”
BackgroundZhou, H., & Khambadkone, A. M. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2023493 · Cited by 283
Performance optimization of a high current dual active bridge with a wide operating voltage range
Krismer, F., Round, S., & Kolar, J. W. (2006) · 2006 37th IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2006.1712096 · Cited by 276 · cited 1×
“[9] and Zhou and Khambadkone [26] introduced trapezoidal and triangular modulation methods to”
Method
Research works printed but not linked: 3
- naayagi ramasamy, 2010, Bidirectional DC-DC converter for aircraft electric energy storage systems
- vangen, 1993, Dual active bridge converter with large soft-switching range, Proc Eur Conf Power Electron Appl, 3, 328
- srimoolanathan, 2008, Aircraft electrical power systems—Charged with opportunities, Aerospace and Defense Executive Briefing of Frost & Sullivan
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Topologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview
Gorji, S. A., Sahebi, H. G., Ektesabi, M., & Rad, A. B. (2019) · IEEE Access · doi:10.1109/access.2019.2937239 · Cited by 439
“As such, these converters are flexible and are widely used in electric vehicles (EVs) or hybrid electric vehicles (HEVs) [1], smart grids [2], uninterruptable power supplies (UPS) [3], aerospace applications [4] and renewable energy systems such as photovoltaic (PV) arrays, fuel cells (FCs), and wind turbines [5]–[7].”
BackgroundHannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
“ized with the arise of SiC power semiconductor technology [28], [103].”
BackgroundOptimized Operation of Current-Fed Dual Active Bridge DC–DC Converter for PV Applications
Shi, Y., Li, R., Xue, Y., & Li, H. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2432093 · Cited by 298
On-Board Microgrids for the More Electric Aircraft—Technology Review
Buticchi, G., Bozhko, S., Liserre, M., Wheeler, P., & Al-Haddad, K. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2881951 · Cited by 270
“Traditionally passive rectifiers using diodes have dominated [42] these applications.”
Background
Metadata
- Authors
- Naayagi, R. T., Forsyth, A. J., & Shuttleworth, R.
- Affiliations
- University of Greenwich (GB)
- University of Manchester (GB)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-11
- Volume
- 27
- Issue
- 11
- Pages
- 4366-4379
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2117657076
- Cited by
- 305
- References
- 31
- Citations by year
- 2026: 7 · 2025: 17 · 2024: 10 · 2023: 25 · 2022: 35 · 2021: 27 · 2020: 20 · 2019: 20 · 2018: 21 · 2017: 18 · 2016: 36 · 2015: 26 · 2014: 24 · 2013: 14 · 2012: 5
- FWCI
- 14.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Research Explorer (The University of Manchester) (publishedVersion)
- Funders
- Engineering and Physical Sciences Research Council
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- bidirectional DC-DC converter, dual active bridge converter, steady-state model, converter losses, zero-voltage switching, snubber capacitor
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-Power Bidirectional DC–DC Converter for Aerospace Applications. https://app.cochat.ai/papers/10.1109/tpel.2012.2184771
- The paper
- Naayagi, R. T., Forsyth, A. J., & Shuttleworth, R. (2012). High-Power Bidirectional DC–DC Converter for Aerospace Applications. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2012.2184771
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.