Optimization and experimental validation of medium-frequency high power transformers in solid-state transformer applications
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
High power isolated DC-DC converters are likely to provide solutions for many technical challenges associated with power density, efficiency and reliability in potential applications such as offshore wind farms, inter-connection of DC grids, MVDC in data centers and in future solid state transformer applications. The high power medium frequency transformer (HPMFT) is one of the key elements of such a converter to realize the voltage adaption, isolation requirements, as well as high power density. This paper describes a design and optimization methodology taking into account the loss calculation, isolation requirements and thermal management. Incorporating this design methodology, an optimization process with a wide range of parameter variations is applied on a 50 kW, 1 / 3 kV, 5 kHz transformer to find the highest power density while the efficiency, isolation, thermal and leakage inductance requirements are all met. The optimized transformers are then manufactured and will be presented in this paper.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Previous research [11], [12], [15], [16] investigated the optimal design methodologies for MFTs.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
In the citing paper
“These designs have power rating exceeding 50 kW, and the operating frequency is in the range of 1.75 kHz and 22 kHz [8-14].”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
In the citing paper
“Test results suggest that the nanocrystalline core MFT has a higher power density and efficiency.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
In the citing paper
“The methodologies have the aim of reaching the best MF transformer for a given power converter topology, by optimizing transformer efficiency, weight, transformer leakage and magnetizing inductances at the same time.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [11]
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
High-Power Bidirectional DC–DC Converter for Aerospace Applications
Naayagi, R. T., Forsyth, A. J., & Shuttleworth, R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2184771 · Cited by 305
A study of volume and weight vs. frequency for high-frequency transformers
Gu, W.-J., & Liu, R. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1993.472059 · Cited by 152
Bahmani, M. A., & Thiringer, T. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2371057 · Cited by 104
Self-citationBahmani, M. A., Thiringer, T., Rabiei, A., & Abdulahovic, T. (2015) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2494883 · Cited by 101
Self-citationBahmani, M. A., Thiringer, T., & Ortega, H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2292593 · Cited by 71 · cited 1×
“These challenges are basically related to the extra losses as a result of eddy current in the magnetic core, excess losses in the windings due to enhanced skin and proximity effects [4] and parasitic elements, i.”
BackgroundSelf-citationVillar, I., Mir, L., Etxeberria-Otadui, I., Colmenero, J., Agirre, X., & Nieva, T. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342754 · Cited by 64
High voltage dual active bridge with series connected high voltage silicon carbide (SiC) devices
Vechalapu, K., Kadavelugu, A., & Bhattacharya, S. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6953674 · Cited by 50
Core loss behavior in high frequency high power transformers—I: Effect of core topology
Bahmani, M. A., Agheb, E., Thiringer, T., Høidalen, H. K., & Serdyuk, Y. V. (2012) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4727910 · Cited by 41
Self-citationDesign and Optimization of HF Transformers for High Power DC-DC Applications
Bahmani, A. (2014) · Chalmers Research (Chalmers University of Technology) · Cited by 27
Research works printed but not linked: 1
- meyer, 2007, Key components for future offshore DC grids
Cited by
High-Frequency Transformer Design for Modular Power Conversion From Medium-Voltage AC to 400 VDC
Zhao, S., Li, Q., Lee, F. C., & Li, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2774440 · Cited by 231
“7 kV IGBT 20 kHz Nanocrystalline and Ferrite CUT 2016 [17] 50 kW 1.”
BackgroundDesign and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
“The CUT [11] also introduces two MFT prototypes (50 kW/5 kHz) design by using nanocrystalline and ferrite magnetic cores, respectively.”
BackgroundMethodLi, Z., Hsieh, E., Li, Q., & Lee, F. C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3279030 · Cited by 111
“Some articles have proposed optimization methods that utilize numerical optimization techniques to sweep through different design parameters and obtain the optimal tradeoff for each design objective [20], [21], [32], [33], [41], [42].”
MethodFabre, J., Ladoux, P., Caron, H., Verdicchio, A., Blaquière, J., Flumian, D., & Sanchez, S. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3033659 · Cited by 66
Power electronic transformers: A review
Battal, F., Balcı, S., & Sefa, İ. (2020) · Measurement · doi:10.1016/j.measurement.2020.108848 · Cited by 79
High frequency transformer design for modular power conversion from medium voltage AC to 400V DC
Zhao, S., Li, Q., & Lee, F. C. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7931108 · Cited by 61
“With development of wide band gap devices the DC/DC stage working frequency is going higher and higher up to 50 kHz [17].”
BackgroundMedium-Frequency Transformer Scaling Laws: Derivation, Verif ication, and Critical Analysis
Guillod, T. (2020) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2020.00003 · Cited by 48
Investigation of Various Transformer Topologies for HF Isolation Applications
Nia, M. S. S., Shamsi, P., & Ferdowsi, M. (2020) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2020.2967412 · Cited by 36
“Using the modified Steinmetz equation presented in [27], the loss density of the core is determined as follows: Pcore loss = 2 β+1 D̂ (D̂) a · 1 (2π)α−1 ́ 2π 0 | cos θ |α ·2β−α ·dθ ·K · f α ·Bβ m.”
A Novel Oil-Immersed Medium Frequency Transformer for Offshore HVDC Wind Farms
Kharezy, M., Mirzaei, H. R., Serdyuk, Y. V., Thiringer, T., & Eslamian, M. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2020.3035718 · Cited by 30
Self-citationA High-Efficiency 80-kW Split Planar Transformer for Medium-Voltage Modular Power Conversion
Lu, S., Kong, D., Xu, S., Luo, L., & Li, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3151796 · Cited by 31
Litz-Wire Winding Loss Calculation Method for Optimal Design of High-Frequency Transformers
Chen, T., Zhao, Z., Shen, Z., Jia, H., Ji, J., & Wang, H. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3361924 · Cited by 28
“Analytical methods, such as Dowell’s equation [11], Tourkhani method [12], and equivalent area method [13], are often used for litz-wire winding loss calculation in transformer optimization design due to their high calculation speed [14], [15], [16].”
MethodDesign of a 200 kW Medium-Frequency Transformer (MFT) With High Insulation Capability
Guo, Z., Sen, S., Rajendran, S., Huang, Q., Feng, X., & Huang, A. Q. (2020) · 2020 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235985 · Cited by 23
Solid state transformer technologies and applications: A bibliographical survey
Adabi, M. E., & Martinez-Velasco, J. (2018) · AIMS energy · doi:10.3934/energy.2018.2.291 · Cited by 20
Thermal modeling and transient behavior analysis of a medium-frequency high-power transformer
Das, A. K., Wei, Z., Vaisambhayana, S., Cao, S., Tian, H., Tripathi, A., & Kjar, P. C. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8216372 · Cited by 19
Rehman, A., Imran-Daud, M., Haider, S. K., Rehman, A. U., Shafiq, M., & Eldin, S. M. (2022) · Symmetry · doi:10.3390/sym14102027 · Cited by 24
Das, A. K., Wei, Z., Cao, S., Vaisambhayana, S., Tian, H., Tripathi, A., & Kjar, P. C. (2017) · IEEE Annual Southern Power Electronics Conference · doi:10.1109/spec.2017.8333556 · Cited by 18
“In [10], [11], design methodology is formulated to derive optimized DAB transformer at medium frequency while constraint of minimum Lσ , required for power transfer, is met.”
MethodDas, A. K., Wei, Z., Fernandes, B. G., Tian, H., Thevar, M. P., Cao, S., Vaisambhayana, S., Tripathi, A., & Kjar, P. C. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341259 · Cited by 18
“Implementation of library-based technique is associated with a heavy computational burden because of exhaustive combinations of free parameters [10], [11].”
BackgroundTeng, J., Bu, Z., Sun, X., Fu, H., Zhao, W. M., & Li, X. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3153367 · Cited by 16
Core loss evaluation of high-frequency transformers in high-power DC-DC converters
Bahmani, A. (2018) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever.2018.8362341 · Cited by 12
“Taking this assumption into account, the generalized Steinmetz equation (GSE) was presented as Pc = 1 T ∫ T 0 kki ∣∣∣∣dB(t)dt ∣∣∣∣ α |B(t)|β−α dt (23) where ki = 1 (2π)α−1 ∫ 2π 0 |cos(θ)|α |sin(θ)|β−α dθ (24) 4) IGSE: The other commonly used expression for core loss calculations is known as the improved generalized St…”
Bahmani, M. A., Vechalapu, K., Mobarrez, M., & Bhattacharya, S. (2017) · IEEE International Conference on DC Microgrids · doi:10.1109/icdcm.2017.8001022 · Cited by 13
“In addition, the coefficient, ki can be calculated as [13], [14]”
MethodSelf-citationEslamian, M., Kharezy, M., & Thiringer, T. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915036 · Cited by 9
Self-citationA Medium Frequency Transformer Design Tool with Methodologies Adapted to Various Structures
Fouineau, A., Guillet, M., Lefebvre, B., Raulet, M., & Sixdenier, F. (2020) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever48776.2020.9243104 · Cited by 14
“Because of this complexity, a lot of work has been done to develop MFT design methodologies [6-11].”
Kharezy, M., Mirzaei, H. R., Thiringer, T., & Serdyuk, Y. V. (2022) · Energies · doi:10.3390/en15061998 · Cited by 9
Self-citationEsenboğa, B., & Demirdelen, T. (2022) · Sustainability · doi:10.3390/su15010032 · Cited by 8
Design considerations of medium-frequency power transformers in HVDC applications
Bahmani, M. A. (2017) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever.2017.7935939 · Cited by 8
Self-citationKharezy, M., Eslamian, M., & Thiringer, T. (2019) · Lecture notes in electrical engineering · doi:10.1007/978-3-030-31680-8_134 · Cited by 8
Self-citationAdvanced modeling of solid state transformer
Adabi, M. E. (2018) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-113997 · Cited by 10
Guo, Z.-C., Cao, B., Chen, C., & Huang, A. Q. (2026) · IEEE transactions on power electronics · doi:10.1109/tpel.2026.3654531 · Cited by 6
Development of a High Power, Medium Frequency Transformer for Medium Voltage Applications
Shafei, A. E., Özdemir, Ş., Altın, N., & Nasiri, A. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362616 · Cited by 5
Das, A. K., Shetty, A., & Fernandes, B. G. (2019) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2019.8755171 · Cited by 4
Fast and Accurate Electric Field Model for Optimizing the Insulation Design of Magnetic Devices
Korthauer, B., & Biela, J. (2021) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc51747.2021.9529943 · Cited by 3
Study of medium frequency transformer by using ultra‐thin silicon steel sheet in DC‐DC converter
Chen, D., Cao, X., Zhang, S., Wang, Y., Zhou, X., & Su, Z. (2022) · IET Power Electronics · doi:10.1049/pel2.12267 · Cited by 3
Mission Profile-Based Reliability Assessment for Modular MVAC-LVDC Solid-State Transformers
Meligy, A., Coelho-Medeiros, R., Colak, I., & Bacha, S. (2025) · IEEE Access · doi:10.1109/access.2025.3603095 · Cited by 4
“In this study, we follow a design procedure similar to those presented in [52], [53], and [54] to design a 15 kHz, 170 kW MFT.”
A calculation method of winding loss of high frequency transformer based on finite element method
Shenghua, P., Yuwen, Z., & Huarong, C. (2024) · AIP Advances · doi:10.1063/5.0206607 · Cited by 3
Lu, S., Xu, S., Deng, J., Li, T., Li, S., Xia, J., & Zhao, D. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3522589 · Cited by 3
“OneofthekeydesignchallengesforMFTsistoeffectively balancemultiplecompetingobjectives,whichincludehigheffi-ciency,high-powerdensity,highelectricalinsulation,andthe superiorthermalperformancesimultaneously[9],[10],[11], [12],[13].”
Jiao, Y., Wang, M., Li, B., Wang, Z., Zhang, B., Guan, Y., & Xu, D. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3580766 · Cited by 2
“13 further illustrates the loss distribution among the power semiconductors, main transformer, and auxiliary transformer, with the losses of both transformers estimated to be approximately 0.5% across all operational conditions [29], [30], [31].”
InfluentialDesign of a High-Frequency Transformer Using Genetic Algorithm
Tamilselvi, S., Kishore, P., Ajith, V., Akshaya, M., & Karuppiah, N. (2022) · Lecture notes in electrical engineering · doi:10.1007/978-981-16-8484-5_51 · Cited by 2
High Frequency Isolated Power Conversion from Medium Voltage AC to Low Voltage DC
Zhao, S. (2017) · VTechWorks (Virginia Tech) · Cited by 4
Electro-thermal Co-design of Medium-Frequency Transformer for Medium Voltage DC Collection Network
Jiang, P., Feng, H., & Ran, L. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10361980 · Cited by 1
“Meanwhile, to improve the heat dissipation of MFT, some optimization structures are proposed [6]-[8].”
BackgroundSimulation of a Custom Core, 15kV Isolated Gap Transformer Optimized for High Power Density
Galamb, A., Teng, F., & Lukic, S. M. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977450 · Cited by 1
A Calculation Method of Winding Loss of High Frequency Transformer Based on Finite Element MethodPreprint
Pan, S., Zhang, Y., & Chen, H. (2024) · Research Square · doi:10.21203/rs.3.rs-4187346/v1 · Cited by 1
An Optimal Design Method of 5 kVA Round Conductor Nanocrystalline High-Frequency Transformer
Zhang, P., Huang, Z., Xun, Y., Qiao, Z., & Meng, Z. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-0451-8_110
Hou, L., Zhao, M. L., Wang, Y., Qu, F., Shao, D., Yang, X., Liu, Y., & Yang, Z. (2024) · Frontiers in Electronics · doi:10.3389/felec.2024.1369905
Landi, G., Sani, L., & Mancuso, C. (2025) · International Aegean Conference on Electrical Machines and Power Electronics & International Conference on Optimization of Electrical and Electronic Equipment (ACEMP-OPTIM) · doi:10.1109/optim-acemp62776.2025.11075282
“Although there is a comprehensive literature on the design of medium-frequency transformers, they typically operate in power and frequency ranges different from those required for supporting the selected specifications of electric vehicle charging stations [18]–[20].”
Fouineau, A. (2019) · theses.fr (ABES) · doi:10.70675/9c9cfcdez524fz4b1ezb2acz97f0aacb4e39 · Cited by 2
Metadata
- Authors
- Bahmani, M. A., Thiringer, T., & Kharezy, M.
- Affiliations
- Chalmers University of Technology (SE)
- RISE Research Institutes of Sweden (SE)
- Venue
- 2016 IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2016-03
- Pages
- 3043-3050
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2403200567
- Cited by
- 45
- References
- 10
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 5 · 2023: 4 · 2022: 7 · 2021: 2 · 2020: 7 · 2019: 4 · 2018: 4 · 2017: 7
- FWCI
- 7.04
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- Energimyndigheten
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- solid-state transformer, transformer design optimization, isolated DC-DC converter, power density, transformer losses, galvanic isolation, thermal management, leakage inductance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.