Active current balancing for parallel-connected silicon carbide MOSFETs
The DOI matches its Crossref record.
Abstract
In high power applications of silicon carbide (SiC) MOSFETs where parallelism is employed, current unbalance can occur and affect the performance and reliability of the power devices. In this paper, factors which cause current unbalance in these devices are analyzed. Among them, the threshold voltage mismatch is identified as a major factor for dynamic current unbalance. The threshold distribution of SiC MOSFETs is investigated, and its effect on current balance is studied in experiments. Based on these analyses, an active current balancing scheme is proposed. It is able to sense the unbalanced current and eliminate it by actively controlling the gate drive signal to each device. The features of fine time resolution and low complexity make this scheme attractive to a wide variety of wide-band-gap device applications. Experimental and simulation results verify the feasibility and effectiveness of the proposed scheme.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Influences of Device and Circuit Mismatches on Paralleling Silicon Carbide MOSFETs
Li, H., Munk-Nielsen, S., Wang, X., Maheshwari, R., Beczkowski, S., Uhrenfeldt, C., & Franke, W.-T. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2408054 · Cited by 306
A Review of High-Speed GaN Power Modules: State of the Art, Challenges, and Solutions
Emon, A. I., Mustafeez-ul-Hassan, Mirza, A. B., Kaplun, J., Vala, S. S., & Luo, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3232265 · Cited by 151
“Active gate driver solution is used as another remedy in [124] to address this problem.”
MethodZhao, C., Wang, L., & Zhang, F. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2954716 · Cited by 146
Parallel Connection of Silicon Carbide MOSFETs—Challenges, Mechanism, and Solutions
Li, H., Zhao, S., Wang, X., Ding, L., & Mantooth, H. A. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3278270 · Cited by 135
“An adjustable gate signal delay auxiliary circuit for the gate driver is proposed to change the switching stress on paralleled MOSFETS in [111] and [112].”
BackgroundAdvances in Power Conversion and Drives for Shipboard Systems
Wang, F., Zhang, Z., Ericsen, T., Raju, R., Burgos, R., & Boroyevich, D. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2495331 · Cited by 135
Self-citationRobustness and Balancing of Parallel-Connected Power Devices: SiC Versus CoolMOS
Hu, J., Alatise, O., Ortiz Gonzalez, J. A., Bonyadi, R., Alexakis, P., Ran, L., & Mawby, P. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2500187 · Cited by 67
Balancing of peak currents between paralleled SiC MOSFETs by source impedances
Mao, Y., Miao, Z., Ngo, K. D. T., & Wang, C.-M. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7930787 · Cited by 12
Brandelero, J., Ewanchuk, J., Degrenne, N., & Mollov, S. (2018) · Microelectronics Reliability · doi:10.1016/j.microrel.2018.07.034 · Cited by 9
Static Current Unbalance of Paralleled SiC MOSFET Modules in the Final Layout
Jauregi, A., Garrido, D., Baraia-Etxaburu, I., Garcia-Bediaga, A., & Rujas, A. (2020) · 2020 IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc49601.2020.9330969 · Cited by 6
Dimitrov, B., Hayatleh, K., Barker, S., & Collier, G. (2021) · Electricity · doi:10.3390/electricity2040026 · Cited by 3
Metadata
- Authors
- Xue, Y., Lu, J., Wang, Z., Tolbert, L. M., Blalock, B. J., & Wang, F.
- Venue
- 2013 IEEE Energy Conversion Congress and Exposition
- Publisher
- IEEE
- Published
- 2013-09
- Pages
- 1563-1569
- OpenAlex
- W1995435443
- Cited by
- 105
- References
- 0
- FWCI
- 8.14
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.