Low Power and High Speed Switching of Ti-doped NiO ReRAM under the Unipolar Voltage Source of less than 3 V
The DOI matches its Crossref record.
Abstract
This paper reports on low-power and high-speed resistive switching of a Ti-doped NiO memory, which is based on the switching mechanism of the redox reactions in a filamentary conductive path. A small reset current of less than 100 muA was achieved by controlling the gate voltage of a cell transistor, which acts as an excellent current limiter in the set operation. A fast reset time of less than 5 ns was achieved by doping the Ti into the NiO film. Ti is thought to be effective to not only stabilize the reset process by forming an oxygen reservoir, but also to suppress the abnormal set phenomenon during the reset operation due to the formation of strong Ti-O bonds. Moreover, stable pulse switching with a large resistance change ratio has been successfully demonstrated using a unipolar voltage source of less than 3 V.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Resistive Random Access Memory (ReRAM) Based on Metal Oxides
Akinaga, H., & Shima, H. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070830 · Cited by 1,037
Lee, H. Y., Chen, P. S., Wu, T. Y., Chen, Y. S., Wang, C. C., Tzeng, P. J., Lin, C. H., Chen, F., Lien, C. H., & Tsai, M.-J. (2008) · 2008 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2008.4796677 · Cited by 641
Ielmini, D. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2167513 · Cited by 551
Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.2010584 · Cited by 389
Mott Memory and Neuromorphic Devices
Zhou, Y., & Ramanathan, S. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2431914 · Cited by 371
Filament Conduction and Reset Mechanism in NiO-Based Resistive-Switching Memory (RRAM) Devices
Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.2010583 · Cited by 361
Oxide-based RRAM materials for neuromorphic computing
Hong, X., Loy, D. J., Dananjaya, P. A., Tan, F., Ng, C., & Lew, W. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2134-6 · Cited by 307
ReRAM: History, Status, and Future
Chen, Y. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2961505 · Cited by 294
A Compact Model for Metal–Oxide Resistive Random Access Memory With Experiment Verification
Jiang, Z., Wu, Y., Yu, S., Yang, L., Song, K., Karim, Z., & Wong, H.-S. P. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2545412 · Cited by 277
A Memristor SPICE Implementation and a New Approach for Magnetic Flux-Controlled Memristor Modeling
Batas, D., & Fiedler, H. (2011) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2009.2038051 · Cited by 263
Resistive Switching by Voltage-Driven Ion Migration in Bipolar RRAM—Part I: Experimental Study
Nardi, F., Larentis, S., Balatti, S., Gilmer, D. C., & Ielmini, D. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2202319 · Cited by 211
“In particular, the set operation in the RRAM based on HfOx [8], NiO [4], [28], [29], and CuO [30] were controlled by an”
MethodThermochemical resistive switching: materials, mechanisms, and scaling projections
Ielmini, D., Bruchhaus, R., & Waser, R. (2011) · Phase Transitions · doi:10.1080/01411594.2011.561478 · Cited by 192
“Figure 15 shows measured R ON (a) and RESET current I reset (b) as a function of drain/compliance current I D , from various sources in the literature 19 , 37 , 38 , 56 , 57 , 60 .”
BackgroundWu, Y., Lee, B., & Wong, H.-S. P. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2074177 · Cited by 161
“stabilize the RRAM device switching as well as reduce the SET voltage due to stronger Ti–O bonds [10].”
BackgroundHigh density 3D memory architecture based on the resistive switching effect
Kügeler, C., Meier, M., Rosezin, R., Gilles, S., & Waser, R. (2009) · Solid-State Electronics · doi:10.1016/j.sse.2009.09.034 · Cited by 158
Stack friendly all-oxide 3D RRAM using GaInZnO peripheral TFT realized over glass substrates
Lee, M.-J., Lee, C. B., Kim, S., Yin, H., Park, J., Ahn, S. E., Kang, B. S., Kim, K. H., Stefanovich, G., Song, I., et al. (2008) · 2008 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2008.4796620 · Cited by 36
Metadata
- Authors
- Tsunoda, K., Kinoshita, K., Noshiro, H., Yamazaki, Y., Iizuka, T., Ito, Y., Takahashi, A., Okano, A., Sato, Y., Fukano, T., Aoki, M., & Sugiyama, Y.
- Venue
- 2007 IEEE International Electron Devices Meeting
- Publisher
- IEEE
- Published
- 2007-12
- Pages
- 767-770
- ISSN
- 0163-1918 (ISSN-L)
- OpenAlex
- W2055175665
- Cited by
- 159
- References
- 0
- FWCI
- 19.13
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.