A Linear-Mode LiDAR Sensor Using a Multi-Channel CMOS Transimpedance Amplifier Array
The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
This paper presents a linear-mode optical sensor for the feasible applications of unmanned vehicle LiDAR systems, in which a pulsed-erbium fiber laser is exploited as a light source and a 16-channel transimpedance amplifier (TIA) array is utilized in an optical Rx module with low-cost InGaAs PIN photodiodes. In particular, a voltage-mode CMOS feedforward (VCF-TIA) is newly proposed to achieve twice higher transimpedance gain with lower noise and similar bandwidth characteristics than a conventional inverter TIA, thereby enabling longer detection. Test chips of the 16-channel VCF-TIA array realized in a standard 0.18-$\mu \text{m}$CMOS process demonstrate 76.3-dB$\Omega $transimpedance gain, 6.3-pA/sqrt(Hz) average noise current spectral density, less than −33-dB crosstalk between channels, and 29.8-mW power dissipation per channel from a single 1.8-V supply. Automatic gain control is also equipped to extend input dynamic range for near-range detection. Hence, the proposed linear-mode optical sensor clearly detects the reflected optical pulses from the target of 5% reflection rate within the range of 0.5–25 m.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Direct-Detection LADAR Systems
Richmond, R. D., & Cain, S. C. (2010) · SPIE eBooks · doi:10.1117/3.836466 · Cited by 147 · cited 2×
“They utilize laser light signals to characterize targets effectively across a scene by detecting and processing the reflected signals from targets [1]–[3].”
BackgroundLi, C., Bai, R., Shafik, A., Tabasy, E. Z., Wang, B., Tang, G., Ma, C., Chen, C.-H., Peng, Z., Fiorentino, M., et al. (2014) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2321574 · Cited by 112
Nissinen, J., Nissinen, I., & Kostamovaara, J. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2009.2017006 · Cited by 103 · cited 4×
“As photodetectors, avalanche photodiodes (APDs) with high responsivity (∼50 A/W) have been extensively exploited to acquire the detection range up to several tens of meters [6]–[10].”
BackgroundInfluentialA High-Sensitivity and Low-Walk Error LADAR Receiver for Military Application
Cho, H.-S., Kim, C.-H., & Lee, S.-G. (2014) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2014.2327282 · Cited by 88
An Integrated Laser Radar Receiver Channel Utilizing a Time-Domain Walk Error Compensation Scheme
Kurtti, S., & Kostamovaara, J. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2047663 · Cited by 71 · cited 2×
“INV-TIAs in [6]–[8] showed slightly better noise performance than the proposed VCF-TIA with large power consumption.”
BackgroundWideband Receiver for a Three-Dimensional Ranging LADAR System
Ngo, T.-H., Kim, C.-H., Kwon, Y. J., Ko, J. S., Kim, D.-B., & Park, H.-H. (2013) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2012.2215800 · Cited by 68 · cited 1×
“They utilize laser light signals to characterize targets effectively across a scene by detecting and processing the reflected signals from targets [1]–[3].”
BackgroundA Linear Dynamic Range Receiver with Timing Discrimination for Pulsed TOF Imaging LADAR Application
Zheng, H., Ma, R., Liu, M., & Zhu, Z. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2826860 · Cited by 46 · cited 1×
“As a front-end circuit, a voltage-mode inverter (INV) TIA has been conventionally utilized [11]–[13].”
MethodA 77-dB Dynamic Range Low-Power Variable-Gain Transimpedance Amplifier for Linear LADAR
Ma, R., Liu, M., Zheng, H., & Zhu, Z. (2018) · IEEE Transactions on Circuits and Systems II: Express Briefs · doi:10.1109/tcsii.2017.2684822 · Cited by 42 · cited 1×
“The CM-TIA in [18] was also a current-mode topology, thus suffering worse noise than a voltage-mode TIA.”
BackgroundZheng, H., Ma, R., Liu, M., & Zhu, Z. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2809795 · Cited by 40
Kurtti, S., & Kostamovaara, J. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.2012364 · Cited by 38 · cited 1×
“The RGC-TIA in [9] yielded deteriorated noise current spectral density because of its inherent currentmode configuration.”
BackgroundBrandl, P., Jukic, T., Enne, R., Schneider-Hornstein, K., & Zimmermann, H. (2016) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2016.2557815 · Cited by 35 · cited 1×
“As photodetectors, avalanche photodiodes (APDs) with high responsivity (∼50 A/W) have been extensively exploited to acquire the detection range up to several tens of meters [6]–[10].”
Background1.5-μm eye-safe coherent lidar system for wind velocity measurement
Asaka, K., Yanagisawa, T., & Hirano, Y. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.417063 · Cited by 23 · cited 1×
“It is noted that the 1550-nm wavelength is an eye-safety region [16].”
BackgroundDual‐mode CMOS feed‐forward transimpedance amplifier for LADARs
Kim, S., Cho, S., & Park, S. M. (2014) · Electronics Letters · doi:10.1049/el.2014.2678 · Cited by 14 · cited 2×
“The DCF-TIA reported in [14] applied the feedforward input technique to a common-gate amplifier, thus achieving twice higher transimpedance gain than a conventional INV input stage for similar noise and bandwidth performance.”
BackgroundMethodSelf-citation2.5 Gbit/s CMOS transimpedance amplifier for optical communication applications
Park, S., & Yoo, H.-J. (2003) · Electronics Letters · doi:10.1049/el:20030142 · Cited by 14 · cited 1×
“5 pF and a parasitic resistance of 25 , as described in [17].”
BackgroundSelf-citationLee, M., & Baeg, S. (2012) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.923640 · Cited by 10 · cited 1×
“In order to achieve high-resolution images, a linear-mode LiDAR sensor can be an efficient solution [4].”
BackgroundTsai, C.-M. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2009.2027555 · Cited by 8 · cited 1×
“As a front-end circuit, a voltage-mode inverter (INV) TIA has been conventionally utilized [11]–[13].”
MethodMultiple object detection and classification on uneven terrain using multi-channel lidar for UGV
Cho, K., Baeg, S., & Park, S. (2012) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.919596 · Cited by 4 · cited 1×
“2852794 the confusion matrix of point classification [5].”
BackgroundSelf-citationA 1.8Gb/s/ch 10mW/ch −23dB crosstalk eight-channel transimpedance amplifier array for LADAR systems
Kim, S. G., Jung, S., Ying, X., Choi, H.-B., Eo, Y. S., & Park, S. M. (2013) · International SoC Design Conference · doi:10.1109/isocc.2013.6864000 · Cited by 4
Self-citation
Research works printed but not linked: 1
- 2017, Pulsed Erbium Doped Fiber Laser Kult Series for 3D Scanning
Cited by
A Low Walk Error Analog Front-End Circuit With Intensity Compensation for Direct ToF LiDAR
Wang, X., Ma, R., Li, D., Zheng, H., Liu, M., & Zhu, Z. (2020) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2020.3022714 · Cited by 64
“References [16]–[18], and [19] employ the linear mode receiver including the TIA to achieve the intensity”
MethodA CMOS Receiver–TDC Chip Set for Accurate Pulsed TOF Laser Ranging
Kurtti, S., Jansson, J.-P., & Kostamovaara, J. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2918372 · Cited by 64
“where a 1-D or 2-D array of detectors is located on the focal plane of the receiver optics [23].”
BackgroundDevelopment of a Lightweight Single-Band Bathymetric LiDAR
Zhou, G., Zhou, X. S., Li, W., Zhao, D., Song, B., Xu, C., Zhang, H., Liu, Z., Xu, J., Lin, G., et al. (2022) · Remote Sensing · doi:10.3390/rs14225880 · Cited by 56
A 60-m range 6.16-mW laser-power linear-mode LiDAR system with multiplex ADC/TDC in 65-nm CMOS
Liu, M., Liu, H., Li, X., & Zhu, Z. (2020) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2019.2955671 · Cited by 54
“noise performance than the VCF-TIA [14] and RCG TIA [5].”
BackgroundInfluentialAn RF Amplifier Circuit for Enhancement of Echo Signal Detection in Bathymetric LiDAR
Zhou, G., Zhao, D., Zhou, X., Xu, C., Liu, Z., Wu, G., Lin, J., Zhang, H., Yang, J., Nong, X., et al. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3206763 · Cited by 52
“[24] produced an amplified circuit for in-vehicle LiDAR in which a trans-impedance was presented and designed to improve its adjustable measurement distance in 2018.”
Method
Metadata
- Authors
- Hong, C., Kim, S.-H., Kim, J.-H., & Park, S. M.
- Affiliations
- Ewha Womans University (KR)
- Venue
- IEEE Sensors Journal
- Published
- 2018-09-01
- Volume
- 18
- Issue
- 17
- Pages
- 7032-7040
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- 2379-9153
- OpenAlex
- W2856799292
- Cited by
- 64
- References
- 18
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 15 · 2023: 6 · 2022: 11 · 2021: 5 · 2020: 8 · 2019: 12
- FWCI
- 5.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Sensors Journal (publishedVersion)
- Funders
- National Research Foundation of Korea (NRF-2014R1A2A2A01005686)
- Dual Use Technology Program
- Topics
- Physical Sciences › Physics and Astronomy › Instrumentation › Advanced Optical Sensing Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Measurement and Detection Methods
- Keywords
- erbium-doped fiber laser, InGaAs PIN photodiode, optical receiver module, pulsed laser ranging, automatic gain control, crosstalk
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.