The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
Fault Diagnosis for Electrical Systems and Power Networks: A Review
Abstract
In this paper, we review the state of the art in the detection, location, and diagnosis of faults in electrical wiring interconnection systems (EWIS) including in the electric power grid and vehicles and machines. Most electrical test methods rely on measurements of either currents and voltages or on high frequency reflections from impedance discontinuities. Of these high frequency test methods, we review phasor, travelling wave and reflectometry methods. The reflectometry methods summarized include time domain reflectometry (TDR), sequence time domain reflectometry (STDR), spread spectrum time domain reflectometry (SSTDR), orthogonal multi-tone reflectometry (OMTDR), noise domain reflectometry (NDR), chaos time domain reflectometry (CTDR), binary time domain reflectometry (BTDR), frequency domain reflectometry (FDR), multicarrier reflectometry (MCR), and time-frequency domain reflectometry (TFDR). All of these reflectometry methods result in complex data sets (reflectometry signatures) that are the result of reflections in the time/frequency/spatial domains. Automated analysis techniques are needed to detect, locate, and diagnose the fault including genetic algorithm (GA), neural networks (NN), particle swarm optimization, teaching-learning-based optimization, backtracking search optimization, inverse scattering, and iterative approaches. We summarize several of these methods including electromagnetic time-reversal (TR) and the matched-pulse (MP) approach. We also discuss the issue of soft faults (small impedance changes) and methods to augment their signatures, and the challenges of branched networks. We also suggest directions for future research and development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of structural health monitoring literature 1996-2001
Farrar, C. R., Czarnecki, J. J., Sohn, H., & Hemez, F. (2002) · Cited by 1,798
Vibration Based Condition Monitoring: A Review
Carden, E. P., & Fanning, P. (2004) · Structural Health Monitoring · doi:10.1177/1475921704047500 · Cited by 1,543
A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring
Lynch, J. P. (2006) · The Shock and Vibration Digest · doi:10.1177/0583102406061499 · Cited by 1,533
Guided wave based structural health monitoring: A review
Mitra, M., & Gopalakrishnan, S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/5/053001 · Cited by 1,045
Fault Location on Power Networks
Saha, M. M., Iżykowski, J., & Rosołowski, E. (2009) · Power systems · doi:10.1007/978-1-84882-886-5 · Cited by 768
Development of a New Type Fault Locator Using the One-Terminal Voltage and Current Data
Takagi, T., Yamakoshi, Y., Yamaura, M., Kondow, R., & Matsushima, T. (1982) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1982.317615 · Cited by 635 · cited 1×
“, [20]–[23]), (ii) doubleend (two-terminal) measurement methods (e.”
Online Diagnosis of Induction Motors Using MCSA
Jung, J.-H., Lee, J.-J., & Kwon, B.-H. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.885131 · Cited by 570
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
Structural Health Monitoring in mainland China: Review and Future Trends
Ou, J., & Li, H. (2010) · Structural Health Monitoring · doi:10.1177/1475921710365269 · Cited by 525
Recent developments of induction motor drives fault diagnosis using AI techniques
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873207 · Cited by 511
Montalvao, D. (2006) · The Shock and Vibration Digest · doi:10.1177/0583102406065898 · Cited by 500
What stator current processing-based technique to use for induction motor rotor faults diagnosis?
Benbouzid, M. E. H., & Kliman, G. B. (2003) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2003.811741 · Cited by 485
Condition monitoring techniques for electrical equipment-a literature survey
Han, Y., & Song, Y. H. (2003) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2002.801425 · Cited by 381
A new fault location technique for two- and three-terminal lines
Girgis, A. A., Hart, D. G., & Peterson, W. L. (1992) · IEEE Transactions on Power Delivery · doi:10.1109/61.108895 · Cited by 374
Transformation Invariance in Pattern Recognition – Tangent Distance and Tangent Propagation
Simard, P. Y., LeCun, Y. A., Denker, J. S., & Victorri, B. (2012) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-35289-8_17 · Cited by 341
A High-Resolution Frequency Estimation Method for Three-Phase Induction Machine Fault Detection
Kia, S. H., Henao, H., & Capolino, G.-A. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.899826 · Cited by 325
Borghetti, A., Bosetti, M., Di Silvestro, M., Nucci, C. A., & Paolone, M. (2008) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2008.919249 · Cited by 300
Ye, X. W., Su, Y. H., & Han, J. P. (2014) · The Scientific World Journal · doi:10.1155/2014/652329 · Cited by 293
Unsynchronized two-terminal fault location estimation
Novosel, D., Hart, D. G., Udren, E., & Garitty, J. (1996) · IEEE Transactions on Power Delivery · doi:10.1109/61.484009 · Cited by 270
Borghetti, A., Bosetti, M., Nucci, C. A., Paolone, M., & Abur, A. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2046655 · Cited by 239
Drif, M., & Cardoso, A. J. M. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2307013 · Cited by 235
A review of nonlinear dynamics applications to structural health monitoring
Worden, K., Farrar, C. R., Haywood, J., & Todd, M. (2008) · Structural Control and Health Monitoring · doi:10.1002/stc.215 · Cited by 212
An Efficient Method Based on the Electromagnetic Time Reversal to Locate Faults in Power Networks
Razzaghi, R., Lugrin, G., Manesh, H. M., Romero, C., Paolone, M., & Rachidi, F. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2251911 · Cited by 196
Self-citationReview of structural health and cure monitoring techniques for large wind turbine blades
Schubel, P. J., Crossley, R. J., Boateng, E. K. G., & Hutchinson, J. R. (2013) · Renewable Energy · doi:10.1016/j.renene.2012.08.072 · Cited by 192
Yang, T., Pen, H., Wang, Z., & Chang, C. S. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2498978 · Cited by 185
A Comparative Evaluation of Advanced Fault Detection Approaches for PV Systems
Pillai, D. S., Blaabjerg, F., & Rajasekar, N. (2019) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2019.2892189 · Cited by 169
Automated transmission line fault analysis using synchronized sampling at two ends
Kezunovic, M., & Perunicic, B. (1996) · IEEE Transactions on Power Systems · doi:10.1109/59.486131 · Cited by 166
Roy, S., Alam, M. K., Khan, F., Johnson, J. D., & Flicker, J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2755592 · Cited by 166
WIRE TROUBLESHOOTING AND DIAGNOSIS: REVIEW AND PERSPECTIVES
Auzanneau, F. (2013) · Progress In Electromagnetics Research B · doi:10.2528/pierb13020115 · Cited by 161
Bazan, G. H., Scalassara, P. R., Endo, W., Goedtel, A., Godoy, W. F., & Palácios, R. H. C. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2016.09.031 · Cited by 149
Real-Time Traveling-Wave-Based Fault Location Using Two-Terminal Unsynchronized Data
Lopes, F. V., Silva, K. M., Costa, F. B., et al. (2015) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2014.2380774 · Cited by 130
Recursive Undecimated Wavelet Packet Transform and DAG SVM for Induction Motor Diagnosis
Keskes, H., & Braham, A. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2462315 · Cited by 121
Eltabach, M., Charara, A., & Zein, I. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822083 · Cited by 113
Filomena, A. D., Resener, M., Salim, R., & Bretas, A. S. (2009) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2009.03.026 · Cited by 107
Fault Location in Transmission Lines Using One-Terminal Postfault Voltage Data
Pereira, C. E. D. M., & Junior, L. C. Z. (2004) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2004.824391 · Cited by 102
A Universal Fault Location Technique for N-Terminal $({N}\geqq 3)$ Transmission Lines
Liu, C., Lien, K.-P., Chen, C., et al. (2008) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2008.919244 · Cited by 87
Dobakhshari, A. S., & Ranjbar, A. M. (2014) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2322977 · Cited by 78
An Iterative Two-Terminal Fault-Location Method Based on Unsynchronized Phasors
Dalcastagnê, A. L., Filho, S. N., Zurn, H. H., et al. (2008) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2008.2002858 · Cited by 75
Development of a new fault location algorithm for multi-terminal two parallel transmission lines
Nagasawa, T., Abe, M., Otsuzuki, N., et al. (1992) · IEEE Transactions on Power Delivery · doi:10.1109/61.141872 · Cited by 73
Miller, C., Plucinski, M. P., Sullivan, A. L., Stephenson, A. G., Huston, C., Charman, K., Prakash, M., & Dunstall, S. (2017) · Landscape and Urban Planning · doi:10.1016/j.landurbplan.2017.06.016 · Cited by 73
A Sparse-Data-Driven Approach for Fault Location in Transmission Networks
Majidi, M., Etezadi-Amoli, M., & Fadali, M. S. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2015.2493545 · Cited by 69
Noncontact Probes for Wire FaultLocation With Reflectometry
Wu, S., Furse, C. M., & Lo, C. (2006) · IEEE Sensors Journal · doi:10.1109/jsen.2006.884560 · Cited by 68
Self-citationLopes, F. V., Lima, P., Ribeiro, J. P. G., et al. (2019) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2019.2891538 · Cited by 63
Locating Multiple Soft Faults in Wire Networks Using an Alternative DORT Implementation
Kafal, M., Cozza, A., & Pichon, L. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2498559 · Cited by 62
Self-citationRotating Electrical Machine Condition Monitoring Automation—A Review
Kande, M., Isaksson, A. J., Thottappillil, R., et al. (2017) · Machines · doi:10.3390/machines5040024 · Cited by 61
Wang, Z., He, S., Li, Q., Liu, B., Razzaghi, R., Paolone, M., Xie, Y., Rubinstein, M., & Rachidi, F. (2018) · IEEE Transactions on Electromagnetic Compatibility · doi:10.1109/temc.2018.2793967 · Cited by 61
Self-citationDiagnosis of Shielded Cable Faults via Regression-Based Reflectometry
Kwon, G.-Y., Lee, C.-K., & Shin, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2840529 · Cited by 59
Self-citationClassification of Faults in Multicore Cable via Time–Frequency Domain Reflectometry
Bang, S. S., & Shin, Y. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2920606 · Cited by 59
Self-citationA Noniterative Method for Locating Soft Faults in Complex Wire Networks
Abboud, L., Cozza, A., & Pichon, L. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2237796 · Cited by 57
An Overview of Spread Spectrum Time Domain Reflectometry Responses to Photovoltaic Faults
Saleh, M. U., Deline, C. A., Benoit, E. J., Kingston, S. R., Edun, A. S., Jayakumar, N. K. T., Harley, J. B., Furse, C. M., & Scarpulla, M. A. (2020) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2020.2972356 · Cited by 51
Self-citationHe, S., Xie, Y., Wang, Z., Rachidi, F., Liu, B., Li, Q., & Kong, X. (2018) · IEEE Transactions on Electromagnetic Compatibility · doi:10.1109/temc.2018.2806892 · Cited by 47
Razzaghi, R., Paolone, M., Rachidi, F., Descloux, J., Raison, B., & Retiere, N. M. (2014) · Power Systems Computation Conference · doi:10.1109/pscc.2014.7038411 · Cited by 45
Self-citationChang, S. J., & Park, J. B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835386 · Cited by 44
Time reversal applied to fault location in power networks: Pilot test results and analyses
Wang, Z., Razzaghi, R., Paolone, M., & Rachidi, F. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.105382 · Cited by 43
Self-citationDetection and Assessment of I&C Cable Faults Using Time–Frequency R-CNN-Based Reflectometry
Lee, C.-K., & Shin, Y. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2970677 · Cited by 38
Self-citationRazzaghi, R., Lugrin, G., Paolone, M., & Rachidi, F. (2013) · IEEE Grenoble Conference · doi:10.1109/ptc.2013.6652101 · Cited by 30
Self-citationSynchronised Measurements Based Algorithm for Long Transmission Line Fault Analysis
Stanojević, V., Preston, G., & Terzija, V. V. (2017) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2658675 · Cited by 29
An In-depth Review: Structural Health Monitoring using Fiber Optic Sensor
Afzal, M. H. B., Kabir, S., & Sidek, O. (2012) · IETE Technical Review · doi:10.4103/0256-4602.95383 · Cited by 23
Bouchekara, H. R. E. H., Smail, M. K., & Dahman, G. S. (2013) · Electromagnetics · doi:10.1080/02726343.2013.756291 · Cited by 21
Li, Q., & Khan, F. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869888 · Cited by 11
Automated transmission line fault analysis using synchronized sampling at two ends
Kezunovic, M., & Perunicic, B. (2002) · IEEE Power Industry Computer Application Conference (PICA) · doi:10.1109/pica.1995.515271 · Cited by 11
Time Reversal techniques applied to wire fault detection and location in wire networks
Abboud, L. (2012) · HAL (Le Centre pour la Communication Scientifique Directe) · Cited by 10
Research works printed but not linked: 118
- 10.1109/PIERS-Spring46901.2019.9017914 · doi:10.1109/piers-spring46901.2019.9017914
- 10.1109/TIM.2019.2896369 · doi:10.1109/tim.2019.2896369
- 10.1109/JSEN.2013.2294193 · doi:10.1109/jsen.2013.2294193
- 10.1109/MEMC.2013.6512221 · doi:10.1109/memc.2013.6512221
- 10.1109/TAP.2010.2090462 · doi:10.1109/tap.2010.2090462
- 10.1063/1.2184600 · doi:10.1063/1.2184600
- 10.2528/PIER09071004 · doi:10.2528/pier09071004
- 10.1109/TPWRD.2004.834863 · doi:10.1109/tpwrd.2004.834863
- 10.1109/TSG.2016.2601379 · doi:10.1109/tsg.2016.2601379
- 10.1016/j.ijepes.2018.03.009 · doi:10.1016/j.ijepes.2018.03.009
- 10.1109/TPWRD.2008.2002698 · doi:10.1109/tpwrd.2008.2002698
- 10.1109/TPWRD.2005.858778 · doi:10.1109/tpwrd.2005.858778
- 10.1109/TEMC.2018.2830404 · doi:10.1109/temc.2018.2830404
- 10.1109/TMAG.2010.2089503 · doi:10.1109/tmag.2010.2089503
- shi, 2013, Identification of wire network topology using impedance spectroscopy, Proc 19th Symp IMEKO, 372
- 10.23919/EUSIPCO.2017.8081671 · doi:10.23919/eusipco.2017.8081671
- boudjefdjouf, 2016, Wire fault diagnosis based on time-domain reflectometry and backtracking search optimization algorithm, Appl Comput Electromagn Soc J, 31, 340
- 10.1080/02726343.2015.971659 · doi:10.1080/02726343.2015.971659
- 10.1016/j.compeleceng.2014.07.002 · doi:10.1016/j.compeleceng.2014.07.002
- 10.3233/JAE-2011-1320 · doi:10.3233/jae-2011-1320
- 10.1109/MSNA.2012.6324524 · doi:10.1109/msna.2012.6324524
- 10.1109/TPWRD.2010.2047412 · doi:10.1109/tpwrd.2010.2047412
- 10.1109/MPER.1985.5528881 · doi:10.1109/mper.1985.5528881
- 10.1109/TPWRD.2009.2031440 · doi:10.1109/tpwrd.2009.2031440
- 10.1109/TIM.2009.2014617 · doi:10.1109/tim.2009.2014617
- 10.1109/ITST.2009.5399294 · doi:10.1109/itst.2009.5399294
- hickman, 2009, An acoustic-based wiring diagnostic system for aircraft
- kafal, 2017, Baselining: A critical approach used for soft fault detection in wire networks, Proc 3rd Int Conf Elect Electron Eng Telecommun Eng Mechatronics (EEETEM)
- 10.1109/TASC.2016.2524520 · doi:10.1109/tasc.2016.2524520
- 10.1109/DIAGNOSTIKA.2018.8526121 · doi:10.1109/diagnostika.2018.8526121
- grégis, 2019, Real time detection and localization of self extinguishing defects on a MV network, Proc 25th Int Conf Electr Distrib (CIRED)
- 10.23919/PSCC.2018.8449024 · doi:10.23919/pscc.2018.8449024
- 10.1109/TEMC.2019.2904841 · doi:10.1109/temc.2019.2904841
- 10.1049/iet-gtd.2016.1215 · doi:10.1049/iet-gtd.2016.1215
- 10.1109/TPWRD.1986.4307961 · doi:10.1109/tpwrd.1986.4307961
- 10.1121/1.1738451 · doi:10.1121/1.1738451
- kafal, 2017, Soft fault diagnosis in wire networks using time reversal concept and subspace methods, Proc 3rd Int Conf Elect Electron Eng Telecommun Eng Mechatronics (EEETEM)
- 10.1109/TIM.2016.2578578 · doi:10.1109/tim.2016.2578578
- 10.1109/TMAG.2017.2765463 · doi:10.1109/tmag.2017.2765463
- 10.1016/0165-2125(94)90039-6 · doi:10.1016/0165-2125(94)90039-6
- 10.1109/AUTEST.2018.8532546 · doi:10.1109/autest.2018.8532546
- walker, 1921, The Diagnosing of Troubles in Electrical Machines
- 1990, Institute of Electrical and Electronics Engineers Recommended Practice for Design of Reliable Industrial and Commercial Power Systems (IEEE Gold Book)
- 10.1109/HOLM.2012.6336569 · doi:10.1109/holm.2012.6336569
- 10.1109/TIM.2012.2187246 · doi:10.1109/tim.2012.2187246
- 10.2528/PIERM13032801 · doi:10.2528/pierm13032801
- 10.1109/TPAS.1985.318906 · doi:10.1109/tpas.1985.318906
- 10.1109/TPWRD.2006.878091 · doi:10.1109/tpwrd.2006.878091
- 10.1109/61.108901 · doi:10.1109/61.108901
- 10.1109/TPWRD.2012.2190528 · doi:10.1109/tpwrd.2012.2190528
- 10.1109/61.296245 · doi:10.1109/61.296245
- 10.1177/1475921705049764 · doi:10.1177/1475921705049764
- 10.1109/TDEI.2008.4543119 · doi:10.1109/tdei.2008.4543119
- 10.1109/6.898797 · doi:10.1109/6.898797
- 1997, Lectromec Report Aging Measurements of Operating Aircraft Wiring Implications for Specification Writing and Aircraft Reliability
- yang, 2006, Accurate data collection: Roadmap to proactive aircraft wiring maintenance, Proc 9th Joint FAA/DoD/NASA Conf Aging Aircr
- 2000, Review of federal programs for wire system safety
- 10.1109/ICEAA.2019.8879093 · doi:10.1109/iceaa.2019.8879093
- 10.1109/AUTEST.2018.8532500 · doi:10.1109/autest.2018.8532500
- hassen, 2019, A damaged twisted pair cable modeling for fault detection and characterization using OMTDR and particle swarm algorithm, Sens Transducers, 236, 7
- 10.1109/AUTOTESTCON43700.2019.8961070 · doi:10.1109/autotestcon43700.2019.8961070
- 10.1109/TEMC.2019.2911035 · doi:10.1109/temc.2019.2911035
- 10.1109/AUTEST.2018.8532521 · doi:10.1109/autest.2018.8532521
- 10.1109/AUTEST.2017.8080495 · doi:10.1109/autest.2017.8080495
- 10.1109/JSEN.2005.858900 · doi:10.1109/jsen.2005.858900
- 10.1109/ICSENS.2017.8234208 · doi:10.1109/icsens.2017.8234208
- 10.1109/LSENS.2019.2916636 · doi:10.1109/lsens.2019.2916636
- 10.1109/JSEN.2005.858964 · doi:10.1109/jsen.2005.858964
- 10.1109/ECCE.2013.6646814 · doi:10.1109/ecce.2013.6646814
- shuxu, 2014, Railway signal section cable fault detection based on improved second correlation, J Data Acquisition Process, 23
- 10.1109/ECCE.2014.6953848 · doi:10.1109/ecce.2014.6953848
- 10.1109/HOLM.2010.5619539 · doi:10.1109/holm.2010.5619539
- 10.1109/TAES.2014.120556 · doi:10.1109/taes.2014.120556
- 10.1109/HOLM.2007.4318203 · doi:10.1109/holm.2007.4318203
- 10.1109/JSEN.2009.2019309 · doi:10.1109/jsen.2009.2019309
- 10.1109/TMAG.2010.2043720 · doi:10.1109/tmag.2010.2043720
- 10.12989/sss.2006.2.1.025 · doi:10.12989/sss.2006.2.1.025
- 10.1109/JSEN.2006.874017 · doi:10.1109/jsen.2006.874017
- 10.1109/TEMC.2004.837842 · doi:10.1109/temc.2004.837842
- 2019, Campbell Scientific TDR100 Instruction Manual
- 10.1109/ECCE.2012.6342450 · doi:10.1109/ecce.2012.6342450
- 10.1002/mop.10241 · doi:10.1002/mop.10241
- 10.1109/JSEN.2019.2956942 · doi:10.1109/jsen.2019.2956942
- 10.1109/AUTEST.2018.8532526 · doi:10.1109/autest.2018.8532526
- 10.1109/TIM.2018.2851646 · doi:10.1109/tim.2018.2851646
- 10.1109/TEMC.2005.847403 · doi:10.1109/temc.2005.847403
- 10.1109/TEMC.2003.811305 · doi:10.1109/temc.2003.811305
- 10.1109/JSEN.2006.874018 · doi:10.1109/jsen.2006.874018
- 10.1109/TIM.2005.858115 · doi:10.1109/tim.2005.858115
- 2019, NASA SWR Technology Finds Cable Faults—http //www eclypse org
- 10.1109/JSEN.2005.858894 · doi:10.1109/jsen.2005.858894
- 10.1049/iet-spr.2009.0137 · doi:10.1049/iet-spr.2009.0137
- 10.1109/TEMC.2008.2007964 · doi:10.1109/temc.2008.2007964
- 10.1109/TPWRD.2017.2680459 · doi:10.1109/tpwrd.2017.2680459
- 10.1109/TIM.2010.2058730 · doi:10.1109/tim.2010.2058730
- 10.1109/TIE.2018.2881937 · doi:10.1109/tie.2018.2881937
- 10.1109/ICD.2018.8468508 · doi:10.1109/icd.2018.8468508
- 10.1109/TIM.2017.2664578 · doi:10.1109/tim.2017.2664578
- 1974, Report on reliability survey of industrial plants, parts I,II,III, IEEE Trans Ind Appl, ia 10, 201
- 10.1109/TASC.2017.2650405 · doi:10.1109/tasc.2017.2650405
- 10.1109/TASC.2017.2652330 · doi:10.1109/tasc.2017.2652330
- 10.1109/JSEN.2006.886866 · doi:10.1109/jsen.2006.886866
- 10.1002/stc.69 · doi:10.1002/stc.69
- 10.1109/JPHOTOV.2019.2953392 · doi:10.1109/jphotov.2019.2953392
- 10.1109/JPHOTOV.2019.2953392 · doi:10.1109/jphotov.2019.2953392
- 2019, Live Cable Fault Detection by LiveWire Innovation
- 10.1109/ISSNIP.2013.6529826 · doi:10.1109/issnip.2013.6529826
- 10.1109/AIEEPAS.1957.4499601 · doi:10.1109/aieepas.1957.4499601
- 10.1109/TEMC.2004.842109 · doi:10.1109/temc.2004.842109
- 10.2528/PIERM12111707 · doi:10.2528/pierm12111707
- 10.1109/ICIEA.2015.7334396 · doi:10.1109/iciea.2015.7334396
- 10.1155/2015/538643 · doi:10.1155/2015/538643
- 10.1109/ICSENS.2017.8234174 · doi:10.1109/icsens.2017.8234174
- 10.1109/AUTEST.2018.8532560 · doi:10.1109/autest.2018.8532560
- 10.1007/s11071-014-1888-x · DOI
- 10.1049/el.2015.3456 · doi:10.1049/el.2015.3456
- 10.1109/JSEN.2016.2606567 · doi:10.1109/jsen.2016.2606567
- 10.1109/LSP.2009.2021378 · doi:10.1109/lsp.2009.2021378
Cited by
Alhamrouni, I., Abdul Kahar, N. H., Salem, M., Swadi, M., Zahroui, Y., Kadhim, D. J., Mohamed, F. A., & Alhuyi Nazari, M. (2024) · Applied Sciences · doi:10.3390/app14146214 · Cited by 217
Tariq, R., Alhamrouni, I., Rehman, A. U., Tag Eldin, E., Shafiq, M., Ghamry, N. A., & Hamam, H. (2022) · Energies · doi:10.3390/en15176468 · Cited by 30
Metadata
- Authors
- Furse, C. M., Kafal, M., Razzaghi, R., & Shin, Y.-J.
- Venue
- IEEE Sensors Journal
- Published
- 2021-01-15
- Volume
- 21
- Issue
- 2
- Pages
- 888-906
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- 2379-9153
- OpenAlex
- W3016541735
- Cited by
- 296
- References
- 62
- FWCI
- 10.46
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Funders
- U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) through Solar Energy Technologies Office (DE-EE0008169)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.