A 2.8 GS/s 44.6 mW Time-Interleaved ADC Achieving 50.9 dB SNDR and 3 dB Effective Resolution Bandwidth of 1.5 GHz in 65 nm CMOS
The DOI matches its Crossref record; 15 of the 21 references it cites were found in a registry or an index.
Abstract
This paper presents a power- and area-efficient 24-way time-interleaved successive-approximation-register (SAR) analog-to-digital converter (ADC) that achieves 2.8 GS/s and 8.1 ENOB in 65 nm CMOS. To minimize the power and the area, the capacitors in the capacitive DAC are sized to meet the thermal noise requirements rather than the matching requirements, leading to the LSB capacitance of 50 aF. An on-chip digital background calibration is used to calibrate the capacitor mismatches in individual ADC channels, as well as the inter-channel offset, gain and timing mismatches. Measurement results at the 2.8 GS/s sampling rate show that the ADC chip prototype consumes 44.6 mW of power from a 1.2 V supply while achieving peak SNDR of 50.9 dB and retaining SNDR higher than 48.2 dB across the entire first Nyquist zone with a$1.8{\rm V} _{{\rm pp}\mathchar"702D {\rm diff}}$input signal. The prototype chip occupies an area of 1.03$\,\times\,$1.66${\rm mm}^{2}$, including the pads and the testing circuits. The figure of merit (FoM) of this ADC, calculated with the minimum SNDR in the first Nyquist zone, is 76 fJ/conversion-step.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“previous ADC designs have used a unit capacitor size as small as 50 aF (ref. 56; 340 times smaller than our Csample).”
From A compute-in-memory chip based on resistive random-access memory (2022) · cites this paper as [56]
Citations
Cites
A 1.5-V, 10-bit, 14.3-MS/s CMOS pipeline analog-to-digital converter
Abo, A. M., & Gray, P. R. (1999) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.760369 · Cited by 923 · cited 1×
“The switch is a slightly modified version of the bootstrapped switch proposed in [24].”
BackgroundTime interleaved converter arrays
Black, W. C., & Hodges, D. A. (1980) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1980.1051512 · Cited by 828 · cited 1×
“However, the energy efficiencies of the ADCs that satisfy these specifications [1], [3] significantly lag behind those that sample in the 100 MHz range [4]–[8].”
BackgroundA 10b 100MS/s 1.13mW SAR ADC with binary-scaled error compensation
Liu, C.-C., Chang, S.-J., Huang, G.-Y., Lin, Y.-Z., Huang, C.-M., Huang, C.-H., Bu, L., & Tsai, C.-C. (2010) · 2010 IEEE International Solid-State Circuits Conference - (ISSCC) · doi:10.1109/isscc.2010.5433970 · Cited by 316
Noise Analysis of Regenerative Comparators for Reconfigurable ADC Architectures
Nuzzo, P., De Bernardinis, F., Terreni, P., & Van der Plas, G. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.917991 · Cited by 305 · cited 1×
“monly used sense-amplifier based latch [23].”
Jamal, S. M., Fu, D., Chang, N. C.-J., Hurst, P. J., & Lewis, S. H. (2002) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2002.804327 · Cited by 292
A 12-GS/s 81-mW 5-bit Time-Interleaved Flash ADC With Background Timing Skew Calibration
El-Chammas, M., & Murmann, B. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2108125 · Cited by 264 · cited 1×
“Section VIII concludes this paper.”
The Impact of Combined Channel Mismatch Effects in Time-Interleaved ADCs
Vogel, C. (2005) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2004.834046 · Cited by 225
A 1.35 GS/s, 10 b, 175 mW Time-Interleaved AD Converter in 0.13 µm CMOS
Louwsma, S. M., van Tuijl, A. J. M., Vertregt, M., & Nauta, B. (2008) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.917427 · Cited by 159
A 1.1V 50mW 2.5GS/s 7b Time-Interleaved C-2C SAR ADC in 45nm LP digital CMOS
Alpman, E., Lakdawala, H., Carley, L. R., & Soumyanath, K. (2009) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2009.4977315 · Cited by 157 · cited 1×
“Section VIII concludes this paper.”
A 480 mW 2.6 GS/s 10b Time-Interleaved ADC With 48.5 dB SNDR up to Nyquist in 65 nm CMOS
Doris, K., Janssen, E., Nani, C., Zanikopoulos, A., & van der Weide, G. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2164961 · Cited by 157
Research works printed but not linked: 12
- corcoran, 1987, A 1 GHz 6 b ADC system, IEEE ISSCC Dig Tech Papers, 102
- poulton, 2003, A 20-Gsample/s 8 b ADC with 1-MByte memory in 0.18-<formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS, IEEE ISSCC Dig Tech Papers, 318
- schvan, 2008, A 24 GS/s 6 b ADC in 90 nm CMOS, IEEE ISSCC Dig Tech Papers, 390
- greshishchev, 2010, A 40 GS/s 6 b ADC in 90 nm CMOS, IEEE ISSCC Dig Tech Papers, 390
- 0, 8-Bit 2 2 Gsps ADC with Track/Hold Amplifier and 1 4 Demultiplexed LVDS Outputs
- kuttner, 2002, A 1.2-V 10-b 20-Msample/s nonbinary successive approximation ADC in 0.13-<formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS, IEEE ISSCC Dig Tech Papers, 176
- 0, ADC10D1000/1500 Low Power 10-bit Dual 1 0/1 5 GSPS or Single 2 0/3 0 GSPS ADC
- liu, 2010, A 10 b 100 MS/s 1.13 mW SAR ADC with binary-scaled error compensation, IEEE ISSCC Dig Tech Papers, 386
- yoshioka, 2010, A 10 b 50 MS/s 820 <formula formulatype="inline"><tex Notation="TeX">$\mu{\rm W}$</tex></formula> SAR ADC with on-chip digital calibration, IEEE ISSCC Dig Tech Papers, 384
- 2010, PHY/MAC draft standard
- liu, 2009, A 600 MS/s 30 mW 0.13 <formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS ADC array achieving over 60 dB SFDR with adaptive digital equalization, IEEE ISSCC Dig Tech Papers, 82
- murmann, 0, ADC Performance Survey 1997?2012
Cited by
Items 101–194 of 194
Time interleaved analog to digital converters: Tutorial 44
Parkey, C. R., & Mikhael, W. B. (2013) · IEEE Instrumentation & Measurement Magazine · doi:10.1109/mim.2013.6704972 · Cited by 10
Zanchi, A., Cabanas-Holmen, M., Yao, M., Meaker, B., & Amort, A. (2016) · IEEE Radiation Effects Data Workshop (REDW) · doi:10.1109/nsrec.2016.7891749 · Cited by 10
Huang, S., Basak, D., Chen, Y., Huang, Q., Fan, Y., & Yuan, J. G. (2024) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2024.3392611 · Cited by 11
“Recent works of literature have been widely adopted the architecture with a reference channel to achieve highly efficient TI SAR ADC designs [9], [10], [11], [12], [13], [14], [15], [16].”
BackgroundMethodWang, L., Li, D., Ding, R., & Zhu, Z. (2024) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2024.3426354 · Cited by 9
“Comparison of different conventional detection methods and architectures [6], [7], [8], [9], [10], [11], [12], [13], [14], [15], [16].”
BackgroundSampling time calibration method for multi-channel interleaved ADCs
Leuciuc, A. (2017) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2017.8050247 · Cited by 9
“The most popular analog technique is using digitally programmable analog delay lines that are aligning the sampling clocks in all ADC channels [4-6].”
BackgroundMethodA 3GSps 12-bit Four-Channel Time-Interleaved Pipelined ADC in 40 nm CMOS Process
Li, J., Guo, X., Luan, J., Wu, D., Zhou, L., Huang, Y., Wu, N., Jia, H., Zheng, X., Wu, J., et al. (2019) · Electronics · doi:10.3390/electronics8121551 · Cited by 9
“Although many techniques have been developed to overcome the time skew issue, they usually need auxiliary circuits such as extra channels [12,16], digital multipliers [10,12–14] and long finite impulse response (FIR) filters [11,15], which could not only degrade the performance of the ADC but also consume plenty of po…”
MethodMismatch calibration methods for high-speed time-interleaved ADCs
Bénabès, P., Lelandais-Perrault, C., & Dortz, N. L. (2014) · IEEE International New Circuits and Systems Conference (NEWCAS) · doi:10.1109/newcas.2014.6933982 · Cited by 9
“More generally, trying to equalize the average of the sub-ADC outputs is a common way of performing offset mismatch calibration [7] [8].”
InfluentialDigital Calibration of Elements Mismatch in Multirate Predictive SAR ADCs
Mafi, H., Yargholi, M., Yavari, M., & Mirabbasi, S. (2019) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2019.2931618 · Cited by 9
“In practice, the value of the capacitive elements manifest random deviations from their desired weights [7], [8], [13], [21], [22], [43].”
BackgroundPractical considerations for application specific time interleaved ADCs
Buchwald, A. (2015) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2015.7338383 · Cited by 8
Duc, H. L., Dinh, T. K. P., Hoang, V., & Nguyen, D. M. (2019) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2019.152999 · Cited by 8
A 14-bit 40-MS/s Split-DAC based SAR ADC in 65 nm CMOS
Liang, W., & Duan, Q. (2022) · Microelectronics Journal · doi:10.1016/j.mejo.2022.105424 · Cited by 8
Constans, L., Combrié, S., Checoury, X., Beaudoin, G., Sagnes, I., Raineri, F., & Rossi, A. D. (2019) · Frontiers in Physics · doi:10.3389/fphy.2019.00133 · Cited by 11
Ta, V.-T., Hoang, V., Pham, V.-P., & Pham, C. (2020) · Electronics · doi:10.3390/electronics9010073 · Cited by 8
Xu, W., Yao, B., Cheng, Q., Du, Z., & Qiu, L. (2024) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2024.3401448 · Cited by 7
“Numerous background calibration techniques have been developed to mitigate timing mismatch in TIADCs [4], [5], [6], [7], [8], [9], [10], [11].”
MethodInfluentialA 2-GS/s 8b Flash-SAR Time-Interleaved ADC with Background Offset Calibration
Cheng, Y.-S., Hu, H.-J., & Chang, S.-J. (2019) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2019.8702543 · Cited by 7
Interchannel Mismatch Calibration Techniques for Time-Interleaved SAR ADCs
Bagheri, M., Schembari, F., Zare-Hoseini, H., Staszewski, R. B., & Nathan, A. (2021) · IEEE Open Journal of Circuits and Systems · doi:10.1109/ojcas.2021.3083680 · Cited by 7
“a binary-weighted structure at its output [16], [21], [23].”
BackgroundMethodA Quad-Channel 11-bit 1-GS/s 40-mW Collaborative ADC Enabling Digital Beamforming for 5G Wireless
Aurangozeb, F., Aryanfar, F., & Hossain, M. (2019) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2019.2916788 · Cited by 7
Hu, M., & Yi, P. (2022) · Applied Sciences · doi:10.3390/app122111029 · Cited by 7
A 12-Bit 2.4 GS/s Four-Channel Pipelined ADC with a Novel On-Chip Timing Mismatch Calibration
Jia, H., Guo, X., Wu, D., Zhou, L., Luan, J., Wu, N., Huang, Y., Zheng, X., Wu, J., & Liu, X. (2020) · Electronics · doi:10.3390/electronics9060910 · Cited by 7
A Filter Bank Mismatch Calibration Technique for Frequency-Interleaved ADCs
Qiu, L., Zheng, Y., & Siek, L. (2016) · Circuits Systems and Signal Processing · doi:10.1007/s00034-016-0252-4 · Cited by 6
Voltage domain correction technique for timing skew errors in time interleaved ADCs
Venkatachala, P. K., ElShater, A., Xu, Y., El-Chammas, M., & Moon, U.-K. (2017) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2017.8050623 · Cited by 6
“This is similar to the degradation of SNR due to the clock tuning circuits in [2-4].”
BackgroundMethodInfluentialYan, X., Qin, K., Zheng, X., Hu, W., Ma, W., & Cui, H. (2024) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2024.3449293 · Cited by 6
“Furthermore, a sign-equally-based calibration algorithm eliminated the need for an auxiliary ADC for time calibration using the voltage difference between adjacent channels to determine the sign of the signal slope [9].”
BackgroundMethodInfluentialAnalog-to-digital converters and time-to-digital converters for high-energy physics experiments
Gui, P. (2023) · Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment · doi:10.1016/j.nima.2023.168649 · Cited by 7
Calibration of timing mismatch in TIADC based on monotonicity detecting of sampled data
Yin, Y., Sun, K., Chen, H., Wang, X., Liu, L., Deng, H., Xu, M., Li, K., & Wang, Z. (2020) · IEICE Electronics Express · doi:10.1587/elex.17.20190699 · Cited by 6
“Timing mismatch in TIADC can be calibrated using analog or mixed-signal techniques [18,19,20], but the calibration precision is not high enough in analog domain, mainly affected by the process.”
BackgroundMethodA Speed-Enhancing Dual-Trial Instantaneous Switching Architecture for SAR ADCs
He, L., Yang, J., Luo, D., Jin, L., Zhang, S., Lin, F., Yao, L., & Jiang, X. (2014) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2014.2362722 · Cited by 5
“One solution is to combine multiple SAR ADCs in parallel [8]–[10] to take samples and perform conversions alternately, such that the overall conversion speed can be multiplied.”
Calibration Techniques for Optimizing Performance of High-Speed ADCs
Martens, E., Markulić, N., Benites, J. L. L., & Craninckx, J. (2023) · Custom Integrated Circuits Conference · doi:10.1109/cicc57935.2023.10121250 · Cited by 5
“, a reference channel) with the output value of the ADC just a linear function of the output bits Bj so that the gradient of the error is readily computed [20]:”
BackgroundAn 8-bit 4fs-step digitally controlled delay element with two cascaded delay units
Wang, W., Zhou, H., Ye, F., & Ren, J. (2015) · IEEE International Conference on ASIC (ASICON) · doi:10.1109/asicon.2015.7517034 · Cited by 5
“Methods include: changing the bulk voltage of the PMOS transistor in some of the inverters, using gate [1][2] or drain capacitors [3] as varactor load, connecting voltage controlled transistors in charging or discharging path as variable resistors [7].”
MethodDuc, H. L., Hoang, V., Nguyen, D. M., & Pham, C. (2018) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2018.8351116 · Cited by 5
Wang, A., Bae, W., Han, J., Bailey, S., Rigge, P., Öçal, O., Wang, Z., Ramchandran, K., Alon, E., & Nikolić, B. (2018) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc.2018.8494317 · Cited by 5
“corrected digitally by re-weighting the output bits [7].”
MethodA Correlation-based Timing Skew Calibration Strategy Using a Time-Interleaved Reference ADC
Ni, M., Wang, X., Zhou, Z., Ding, Y., Li, F., Rhee, W., & Wang, Z. (2020) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas48704.2020.9184443 · Cited by 5
“Reference [3] introduces a secondary reference ADC to calculate the derivatives of each sub-ADC channel to obtain the timing skew information.”
A High-Speed ADC for a Multi-Band 5G V2X Wireless Receiver
Navidi, S. M., Maharmeh, H. A., Parekh, S., Wehbi, A., Alhawari, M., & Ismail, M. (2022) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas48785.2022.9937936 · Cited by 4
A Full-Band Timing Mismatch Calibration Technique in Time-Interleaved ADCs
Li, J., Ye, X., Luo, J., Ning, N., & Yu, Q. (2018) · Journal of Circuits Systems and Computers · doi:10.1142/s0218126619500920 · Cited by 4
A 12-bit 600-MS/s time-interleaved SAR ADC with background timing skew calibration
Wei, Y.-H., Lin, C., & Lee, T. (2016) · IEEE International Symposium on Radio-Frequency Integration Technology (RFIT) · doi:10.1109/rfit.2016.7578191 · Cited by 4
“INTRODUCTION Recently, many timing-skew calibration algorithms have been reported for time-interleaved ADCs to estimate and correct timing error in the analog domain [1], [2] or in the digital domain [3].”
BackgroundZheng, Y., Zhou, N., Zhao, Y., & Sun, S. (2022) · Review of Scientific Instruments · doi:10.1063/5.0103225 · Cited by 4
Gu, M., Tao, Y., He, X., Zhong, Y., Jie, L., & Sun, N. (2023) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc59616.2023.10268795 · Cited by 4
“One way to correct timing-skew errors in the background is to periodically align each sub-ADC channel with an extra reference channel [1], but this scheme suffers from reference spurs due to a time-variant input impedance.”
Navidi, S. M., & Navidi, M. M. (2024) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.4133 · Cited by 3
“On the other hand, Stepanovic and Nikolic 14 adopt a different strategy, employing a pseudorandom number generator to introduce randomness to the operating frequency of the REF-ADC.”
InfluentialA Timing Skew Calibration Scheme in Time-Interleaved ADC
Li, J., Liu, Y., Liu, H., Wu, S., Ning, N., & Yu, Q. (2013) · Journal of Computer and Communications · doi:10.4236/jcc.2013.16007 · Cited by 3
“Time-interleaving can also achieve better power consumption for Giga-Herz ADCs compared to traditional ADC architectures.”
BackgroundInfluentialA channel multiplexing digital calibration technique for timing mismatch of time-interleaved ADCs
Yin, Y., Liu, L., Chen, H., Deng, H., Xu, M., Wu, J.-S., & Wang, Z. (2019) · IEICE Electronics Express · doi:10.1587/elex.16.20190540 · Cited by 3
“2 Timing mismatch compensation The compensation techniques for timing mismatch usually include variable delay line [7], [8], [12], Farrow structure filter [26], [27], Taylor series expansion compensation [28], and adaptive calibration algorithm [29], [30].”
MethodCountermeasures against physical security attacks on ICs utilizing on-chip wideband ADCs
Miki, T., & Nagata, M. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac4823 · Cited by 3
Tao, Y., Ragab, K., Shao, J., Chen, P., Zhong, Y., Jie, L., & Sun, N. (2022) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas48785.2022.9937769 · Cited by 3
“Derivative-based timing skew mismatch estimation techniques leverage the fact that timing error is proportional to the signal derivative [3], [4].”
BackgroundA digital time skew calibration technique for time-interleaved ADCs
Qiu, L., Tang, K., Zheng, Y., & Siek, L. (2015) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2015.7169142 · Cited by 3
“Generally, the background calibration techniques are preferred as it does not interrupt normal operation of TIADCs and could track environmental variation (e.g. temperature, process aging).”
BackgroundMethodInfluentialTwo-Stage Difference-Based Estimation Method for Timing Skew in TI-ADCs
Li, X., Vogel, C., & Wu, J. (2021) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas51556.2021.9401240 · Cited by 3
A Pattern Extraction Based Background Calibration Technique for SAR ADCs
Ding, X., Zhang, L., Liu, W., Yi, D., Ma, Y., & Hofmann, K. (2021) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2021.3083805 · Cited by 3
A time-interleaved ADC calibration technique for spectrum monitoring applications
Baran, D. (2022) · Microelectronics Journal · doi:10.1016/j.mejo.2022.105414 · Cited by 3
A Signal-Independent Background Calibration Technique for Time-Interleaved ADCs
Xu, W., Du, Z., Zhuo, S., & Qiu, L. (2024) · Circuits Systems and Signal Processing · doi:10.1007/s00034-024-02873-1 · Cited by 2
“Besides, the input impedance of the time-interleaved ADC changes periodically in [13], as the driver will see 2 × ADC input sampling networks while the sampling edge of the reference ADC coincides with that of one of the TIADC sub-channels, otherwise 1 × ADC input sampling network.”
InfluentialA ramp-based background calibration technique for timing mismatch in time-interleaved ADCs
Yu, Y., Miao, P., Li, F., Wang, D., Zhang, H., & Ding, A. (2025) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2025.155717 · Cited by 2
Kim, J., Cho, G., Song, H., Kim, H., & Kim, J. (2025) · doi:10.1109/esserc66193.2025.11213942 · Cited by 2
“C ONCLUSIONS This paper introduces a CI-SAR based TI-ADC with a very small form factor, boasting an area efficiency comparable to those fabricated in 3~5nm process nodes.”
A Novel CDR-Based Low-Cost Time-Interleaved-ADC Timing Calibration
Faig, H., Rohlin, D., Cohen, S., Gantz, L., Sheffi, N., & Sadot, D. (2020) · Journal of Lightwave Technology · doi:10.1109/jlt.2020.2974962 · Cited by 2
“(4) Signal derivation: Under the assumption of a bandwidth (BW) limited signal and linear approximation, the timing mismatch effect is proportional to the signal’ s first derivative [19]–[20].”
BackgroundBackground Timing-Skew Mismatch Calibration for Time-Interleaved ADCs
Guo, M., Sin, S., & Martins, R. P. (2021) · International SoC Design Conference · doi:10.1109/isocc53507.2021.9613935 · Cited by 2
“However, the TI structure is affected by mismatches between channels between different sub-ADCs, including offset, gain, and timing mismatch [2-8].”
BackgroundMethodA Dithered-Digital-Mixing Background Timing-Skew Calibration Method for Time-Interleaved ADCs
Tao, Y., Zhong, Y., Shao, J., Men, C., Jie, L., & Sun, N. (2024) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas58744.2024.10558642 · Cited by 2
Li, M., Lv, F., Lai, M., Zheng, X., Huang, H., Qi, X., & Zhang, G. (2024) · Microelectronics Journal · doi:10.1016/j.mejo.2024.106330 · Cited by 2
Multi-Channel Analog Beamforming Transceiver for mmWave Communications
Zhao, H., Entesari, K., & Hoyos, S. (2025) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2025.3539169 · Cited by 2
“Power consumption per DAC/ADC is estimated based on literature [45], [46], [47], [48], [49], [50], considering resolutions of 6, 8, and 10 bits.”
High-speed, low-power subranging ADCs
Ohhata, K. (2015) · IEEE International Symposium on Radio-Frequency Integration Technology (RFIT) · doi:10.1109/rfit.2015.7377924 · Cited by 2
Charge‐dumping switching scheme for successive‐approximation‐register analogue‐to‐digital converters
Chiang, S.-H. W. (2016) · Electronics Letters · doi:10.1049/el.2015.3664 · Cited by 2
Generalization of Referenceless Timing Mismatch Calibration Methods for Time-Interleaved ADCs
Uran, A., Kilic, M. S., & Leblebici, Y. (2018) · Conference on Ph.D. Research in Microelectronics and Electronics · doi:10.1109/prime.2018.8430340 · Cited by 2
“Several methods [5], [6] that were proposed to overcome the timing mismatch problem employ an additional channel which samples the input at the same instant as the calibrated channel, providing a reference point for mismatch detection.”
MethodCalibration of M-Channel Time-Interleaved Analog-to-Digital Converters Based on Curve Fitting
Tavares, Y. A., Lee, S.-W., Kim, S., & Lee, M. (2020) · International SoC Design Conference · doi:10.1109/isocc50952.2020.9333091 · Cited by 2
“The TI-ADC is able to handle such a high sampling frequency due to its wider linear region of power and speed, compared to single ADC architectures [1].”
BackgroundA Background Timing Skew Calibration Technique in Time-Interleaved ADCs
Wu, Z., Li, F., Ni, M., Ding, Y., & Wang, Z. (2019) · IEEE International Conference on Electron Devices and Solid-State Circuits (EDSSC) · doi:10.1109/edssc.2019.8754374 · Cited by 1
“As in [5], two extra channels are used to obtain the slope of the input signal, which calibrates at a cost of power and hardware complexity.”
MethodDesign Techniques for High-Speed and Low Power SAR ADC: A Review
Tiwari, V., & Nagaria, R. K. (2025) · Journal of Circuits Systems and Computers · doi:10.1142/s0218126625300041 · Cited by 1
Tao, Y., Gu, M., Zhong, Y., Jie, L., & Sun, N. (2026) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2026.3677867 · Cited by 1
“Reference-channel-based methods [17], [18], [19], [20], [21], [22], [23] typically rely on the derivative of the input signal and thus cannot operate properly with DC inputs or beyond the bandwidth of the derivative filter [21].”
DIGITAL BACKGROUND CALIBRATION FOR TIMING SKEW IN TIME-INTERLEAVED ADC
Li, J., Liu, Y., Wu, S., Ning, N., & Yu, Q. (2014) · Journal of Circuits Systems and Computers · doi:10.1142/s0218126614501175 · Cited by 1
Kurumatani, H., & Katsura, S. (2019) · SICE Journal of Control Measurement and System Integration · doi:10.9746/jcmsi.12.20 · Cited by 1
“Similarly, a time-interleaved type ADC [8], which has the good time resolution, has been widely studied but it can not address the saturation effect and requires conservative design.”
BackgroundHu, J., Cao, Z., Zhao, L., Liu, S., & An, Q. (2020) · Journal of Instrumentation · doi:10.1088/1748-0221/15/01/p01024 · Cited by 1
Paryanti, G., & Sadot, D. (2020) · Journal of Lightwave Technology · doi:10.1109/jlt.2020.2981606 · Cited by 1
“The timing offset can be linearly described by the actual time-offset sample and the target non-distorted sample by using the Taylor approximation, and by assuming the time offset is small in respect to the sampling rate (see also [14]–[16]):”
MethodA 6.4-GS/s 10-b Time-Interleaved SAR ADC with Time-Skew Immune Sampling Network in 28-nm CMOS
Ding, N., Mu, Y., Guo, Y., Chen, T., & Chang, Y. (2020) · Journal of Circuits Systems and Computers · doi:10.1142/s0218126620502643 · Cited by 1
An Approximate Timing-Mismatch Calibration Technique for Interleaved ADCs
Baran, D., Karav, E., & Yaren, H. (2021) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas47672.2021.9531840 · Cited by 1
“After estimating the timing mismatches, there are different techniques to correct them [1-10].”
MethodA fully digital mismatch calibration algorithm for Time-Interleaved ADCs
Chen, H., Wang, L., Xiao, R., Yin, Y., Deng, H., & Xu, M. (2021) · IEEE International Conference on Integrated Circuits, Technologies and Applications (ICTA) · doi:10.1109/icta53157.2021.9661607 · Cited by 1
Zhang, H., Hassan, A., Chen, P., Snelgrove, W. M., & Carusone, A. C. (2022) · IEEE Access · doi:10.1109/access.2022.3173651 · Cited by 1
Recent Progress on Calibration Methods of Timing Skew in Time-Interleaved ADCS
Yang, H., Zhang, R., & Ren, M. (2023) · Journal of Circuits Systems and Computers · doi:10.1142/s0218126623300040 · Cited by 1
Çetinkaya, H., Girgin, A., & Karalar, T. C. (2023) · Microelectronics Journal · doi:10.1016/j.mejo.2023.105840 · Cited by 1
Huang, G., Xu, D., Gao, P., Zhou, M., Liu, J., & Wang, Z. (2024) · Electronics · doi:10.3390/electronics13132459 · Cited by 1
“By using two ADCs to sample the same input but with different bandwidths, it is possible to determine the difference between the two ADCs [18].”
BackgroundMethodA 1.25GS/s 8-bit Time-interleaved C-2C SAR ADC for Wireline Receiver Applications
Wang, Q. (2013) · TSpace (University of Toronto) · Cited by 3
Compensation numérique pour convertisseur large bande hautement parallélisé.
Dortz, N. L. (2015) · theses.fr (ABES) · doi:10.70675/46f0d907zb36az47bbza626zfc63fa56b081 · Cited by 1
“The offset mismatches are often calibrated by equalizing the sub-ADC output averages [26, 27].”
BackgroundMethodBray, A. (2013) · UWSpace (University of Waterloo)
Ma, S., Chen, Y., Ye, F., & Ren, J. (2014) · IEEE International Conference on Solid-State and Integrated Circuit Technology · doi:10.1109/icsict.2014.7021296
SAR ADCs in parallel [time-interleaved] converter arrays
Kapusta, R. (2015) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2015.7338441 · Cited by 1
A switch-decoded current-steering DAC
Hu, R., & Zhang, X. (2015) · International Conference on Optoelectronics and Microelectronics · doi:10.1109/icoom.2015.7398812
“Because of the development of radiation detect techniques, wide-bandwidth communication, medical instruments and so on, ADCs with higher sampling rate and more precise resolution are needed [1-5].”
BackgroundDesign of high speed high resolution ADC with innovative architecture and circuits
Qiu, L. (2016) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/67024
Design and monolithic realization of high-speed high-resolution analog-to-digital converters
Liu, Q. (2018) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/73443
“1(a), is increasingly replaced by its radio frequency (RF) direct sampling counterpart [2, 3] depicted in Figure 1.”
BackgroundMethodInfluentialQiu, Y., Zhou, J., Liu, Y., Xiong, B., & Huo, F. (2018) · International Conference on Microwave and Millimeter Wave Technology (ICMMT) · doi:10.1109/icmmt.2018.8563280
Zahrai, S. A. (2017) · Digital Repository Service (Northeastern University) · doi:10.17760/d20254741
A 1GS/s, 9-bits DAC Interleaved (2+1)-bit Then 2-bit per Cycle SAR ADC
El-Sawy, S., & Tekin, A. (2020) · Istanbul University - Journal of Electrical & Electronics Engineering · doi:10.5152/electrica.2020.20048
“This was achieved by doubling the area and the power [6-9].”
BackgroundPelgrom, M. J. M. (2016) · Springer eBooks · doi:10.1007/978-3-319-44971-5_9
Digitally-assisted design and calibration for high performance flash analog-to-digital converters
Zlochisti, M. (2018) · Digital Repository Service (Northeastern University) · doi:10.17760/d20315049
Pelgrom, M. J. M. (2021) · Springer eBooks · doi:10.1007/978-3-030-90808-9_18
Li, W., Li, F., & Wang, Z. (2017) · Analog circuits and signal processing/Analog circuits and signal processing series · doi:10.1007/978-3-319-62012-1_6
High-Resolution Wide-Bandwidth Time-Interleaved RF ADC
Ramkaj, A. T., Pelgrom, M. J. M., Steyaert, M. S. J., & Tavernier, F. (2022) · Analog circuits and signal processing/Analog circuits and signal processing series · doi:10.1007/978-3-031-22709-7_6
Architectural Considerations for High-Efficiency GHz-Range ADCs
Ramkaj, A. T., Pelgrom, M. J. M., Steyaert, M. S. J., & Tavernier, F. (2022) · Analog circuits and signal processing/Analog circuits and signal processing series · doi:10.1007/978-3-031-22709-7_3
A SAR ADC for multichannel synchronous signal acquisition
Hu, W., Xue, M., Xiang, Y., Ren, J., Qin, K., Ma, W., Zhao, G., Xiao, Z., & Wang, M. (2023) · Microelectronics Journal · doi:10.1016/j.mejo.2023.105980 · Cited by 1
Hadamard-Walsh Channelized Receivers: Theory, Implementation, and Applications
Balaji, A., Liu, Z., Joshi, S., & Cauwenberghs, G. (2025) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas56072.2025.11043293
“ADCs, for example, that operate at these high frequencies are significantly less efficient than those operating at or below 100 MHz [3].”
Atre, A. P., Jaiswal, R. C., & Atre, M. P. (2025) · International Journal of Electrical Engineering and Computer Science · doi:10.37394/232027.2025.7.25
Atre, A. P., Jaiswal, R. C., & Atre, M. P. (2026) · Lecture notes in networks and systems · doi:10.1007/978-3-032-10783-1_34
Yu, Y., Miao, P., Li, F., Zhang, H., & Wang, D. (2026) · IEICE Electronics Express · doi:10.1587/elex.23.20260083
Bonnetat, A. (2015) · theses.fr (ABES) · doi:10.70675/8293fbc5z2525z46dezb30cz8c644906f541
“à une seule voie de codage) requièrent une puissance dissipée disproportionnée pour augmenter la fréquence d’échantillonnage [12, 13], comme illustré par l’évolution de la courbe dans la Figure 1.”
Convertisseur analogique-numérique large bande avec correction mixte
Mas, A. (2018) · theses.fr (ABES) · doi:10.70675/a0287505z34ebz4aebz89adzeea8f70e564f · Cited by 4
Metadata
- Authors
- Stepanovic, D., & Nikolic, B.
- Affiliations
- Agilent Technologies (United States) (US)
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2013-04
- Volume
- 48
- Issue
- 4
- Pages
- 971-982
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2113142084
- Semantic Scholar
- fc0c11f72145fe3c0a3f33d52f4c099ed5704d30
- Cited by
- 192
- References
- 21
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 14 · 2023: 8 · 2022: 17 · 2021: 15 · 2020: 14 · 2019: 16 · 2018: 21 · 2017: 17 · 2016: 18 · 2015: 21 · 2014: 14 · 2013: 8
- FWCI
- 11.22
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Journal of Solid-State Circuits (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Radio Frequency Integrated Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in PLL and VCO Technologies
- Keywords
- time-interleaved ADC, successive approximation register ADC, capacitive DAC, thermal noise, capacitor mismatch calibration, digital background calibration, low-power analog-to-digital converter, 65 nm CMOS
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.