Condition Monitoring: A Decade of Proposed Techniques
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Power conversion systems are dependent on the performance and reliability of static converters. However, they are subject to frequent functional and environmental strains, which can induce failures. The anticipation of these failures is difficult but important so the operation of a system can be halted before a breakdown occurs. In the case of photovoltaic (PV) power plants, the system can be simplified into two distinct blocks: the solar panels/modules and the power inverter. A breakdown in either of these blocks can cause significant downtime in the system. Nevertheless, multiple solar module failures can often be tolerated and not lead to a total breakdown of the entire array, whereas a single component failure in the inverter can lead to a collapse of the entire system. Furthermore, solar panel/module manufacturers often offer warranties of up to 20 years, while warranties for inverters rarely reach the ten-year mark [1]. As such, the overall cost of a PV inverter can increase by a factor of two or three if it undergoes one or two failures during the life of the system. Although the market competition between PV inverter manufacturers has traditionally focused on the efficiency of their product, a failure that induces a downtime of just a few days can easily negate the yield attained through a 1% efficiency improvement. Oversizing the inverter or introducing redundancy into the inverter system is one option to improve reliability; however, often, this is not economical.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278 · cited 1×
“[3] classified health-monitoring techniques for power converters into three different categories:”
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039 · cited 1×
“Power module failure mechanisms are generally separated into two categories: chip-related failure mechanisms and package-related failure mechanisms [8].”
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232 · cited 1×
“First, the measurement of the forward voltage must have high resolution to observe voltage variations in some cases of only several percentage points, at which point large degradation can already be present [44].”
Cited by
Bayesian Deep-Learning-Based Health Prognostics Toward Prognostics Uncertainty
Peng, W., Ye, Z.-S., & Chen, N. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2907440 · Cited by 294
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
Reliability of Power Electronic Systems for EV/HEV Applications
Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3031041 · Cited by 249
Real-Time Measurement of Temperature Sensitive Electrical Parameters in SiC Power MOSFETs
Griffo, A., Wang, J., Colombage, K., & Kamel, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739687 · Cited by 175
“remaining useful life [6].”
Degradation Assessment and Precursor Identification for SiC MOSFETs Under High Temp Cycling
Ugur, E., Yang, F., Pu, S., Zhao, S., & Akin, B. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2891214 · Cited by 159
Metadata
- Authors
- Avenas, Y., Dupont, L., Baker, N., Zara, H., & Barruel, F.
- Venue
- IEEE Industrial Electronics Magazine
- Published
- 2015-12
- Volume
- 9
- Issue
- 4
- Pages
- 22-36
- ISSN
- 1932-4529 (ISSN-L)
- OpenAlex
- W2210821273
- Cited by
- 107
- References
- 3
- FWCI
- 3.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.