Damage propagation modeling for aircraft engine run-to-failure simulation
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the prognostics and health management (PHM) data competition at PHMpsila08.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“has become a pivotal resource for researchers and practitioners in the field of prognostics and health management, allowing for the realistic simulation and testing of PdM models”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“This dataset, developed through damage propagation modeling for aircraft engine run-to-failure simulation, has become a pivotal resource for researchers and practitioners in the field of prognostics and health management”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. (2008)
In the citing paper
“In addition, a custom S-score, given by Saxena et al. [[21](https://doi.org/10.3390/fi17060244#B21-futureinternet-17-00244)], is employed to evaluate prognostic performance by asymmetrically penalizing over-estimations and under-estimations.”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. [21]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The M3-Competition: results, conclusions and implications
Makridakis, S., & Hibon, M. (2000) · International Journal of Forecasting · doi:10.1016/s0169-2070(00)00057-1 · Cited by 1,695
The accuracy of extrapolation (time series) methods: Results of a forecasting competition
Makridakis, S., Andersen, A., Carbone, R., Fildes, R., Hibon, M., Lewandowski, R., Newton, J., Parzen, E., & Winkler, R. (1982) · Journal of Forecasting · doi:10.1002/for.3980010202 · Cited by 1,462
Metrics for evaluating performance of prognostic techniques
Saxena, A., Celaya, J., Balaban, E., Goebel, K., Saha, B., Saha, S., & Schwabacher, M. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711436 · Cited by 518
Self-citationStandardizing the Performance Evaluation of Short-Term Wind Power Prediction Models
Madsen, H., Pinson, P., Kariniotakis, G., Nielsen, H. A., & Nielsen, T. S. (2005) · Wind Engineering · doi:10.1260/030952405776234599 · Cited by 343
User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)
Frederick, D. K., DeCastro, J., & Litt, J. S. (2007) · NASA Technical Reports Server (NASA) · Cited by 259
Time series prediction competition: The CATS benchmark
Lendasse, A., Erkki Oja, A., Simula, O., & Verleysen, M. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.02.013 · Cited by 96
Online Model Parameter Estimation of Jet Engine Degradation for Autonomous Propulsion Control
Chatterjee, S., & Litt, J. S. (2003) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2003-5425 · Cited by 46
Kobayashi, T., & Simon, D. L. (2004) · doi:10.1115/gt2004-53640 · Cited by 43
Self-citationApplication of Autoassociative Neural Network on Gas-Path Sensor Data Validation
Lu, P.-J., & Hsu, T.-C. (2002) · Journal of Propulsion and Power · doi:10.2514/2.6013 · Cited by 38
Probabilistic Matching of Turbofan Engine Performance Models to Test Data
Roth, B. A., Doel, D. L., & Cissell, J. J. (2005) · doi:10.1115/gt2005-68201 · Cited by 34
Research works printed but not linked: 2
- 0, E-Handbook of Statistical Methods
- 0, NN5 Forecasting Compotition for Artificial Neural Networks & Computational Intelligence
Cited by
Items 901–1,000 of 1,001
Data model-based sensor fault diagnosis algorithm for closed-loop control systems
Han, X., Zhou, X., Lu, F., & Huang, J. (2025) · Measurement · doi:10.1016/j.measurement.2025.116715 · Cited by 13
Solis‐Martín, D., Galán‐Paez, J., & Borrego‐Díaz, J. (2025) · Neural Computing and Applications · doi:10.1007/s00521-025-10995-z · Cited by 10
xiong, Y., Guo, B., & Dian, S. (2025) · Measurement Science and Technology · doi:10.1088/1361-6501/adb1d4 · Cited by 9
Xu, X., Zhou, X., Fan, Q., Yan, H., & Fangxiao, W. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.110997 · Cited by 9
Yang, C.-L., Meles, T. Y., Yilma, A. A., & Teshome, M. M. (2026) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2026.103992 · Cited by 20
Jose, S., Ngouna, R. H., Nguyen, K. T. P., & Medjaher, K. (2022) · International Conference on Control, Decision and Information Technologies (CoDIT) · doi:10.1109/codit55151.2022.9804090 · Cited by 11
Robust Feature Learning for Remaining Useful Life Estimation Using Siamese Neural Networks
Aydemır, G., Paynabar, K., & Acar, B. (2022) · European Signal Processing Conference (EUSIPCO) · doi:10.23919/eusipco55093.2022.9909630 · Cited by 9
Error and optimism bias regularization
Sohaee, N. (2023) · Journal Of Big Data · doi:10.1186/s40537-023-00685-9 · Cited by 10
Federated Condition Monitoring Signal Prediction With Improved Generalization
Chung, S., & Kontar, R. A. (2023) · IEEE Transactions on Reliability · doi:10.1109/tr.2023.3283348 · Cited by 11
Truthful meta-explanations for local interpretability of machine learning models
Mollas, I., Bassiliades, N., & Tsoumakas, G. (2023) · Applied Intelligence · doi:10.1007/s10489-023-04944-3 · Cited by 11
Markov Chain Stochastic DCA and Applications in Deep Learning with PDEs Regularization
Luu, H. P. H., Le, H. M., & Thi, H. A. L. (2023) · Neural Networks · doi:10.1016/j.neunet.2023.11.032 · Cited by 9
ERF-XGB: An Edge-IoT-Based Explainable Model for Predictive Maintenance
Xiao, Y., Huo, Y., Cai, J., Gong, Y., Liang, W., & Kołodziej, J. (2024) · IEEE Transactions on Consumer Electronics · doi:10.1109/tce.2024.3371440 · Cited by 14
Mehta, A., & Verma, R. K. (2024) · The Journal of Supercomputing · doi:10.1007/s11227-024-06210-w · Cited by 9
Wang, M., Li, Y., Zhao, H., & Zhang, Y. (2020) · Lecture notes in electrical engineering · doi:10.1007/978-981-15-1773-0_14 · Cited by 10
Empirical Convergence Analysis of Federated Averaging for Failure Prognosis
Dhada, M. H., Jain, A. K., & Parlikad, A. K. (2020) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2020.11.058 · Cited by 9
Remaining Useful Life Estimation of Aircraft Engines Using Differentiable Architecture Search
Mao, P., Lin, Y., Xue, S., & Zhang, B. (2022) · Mathematics · doi:10.3390/math10030352 · Cited by 11
Zheng, Y., Bao, X., Zhao, F., Chen, C., Liu, Y., Bo, S., & Wang, H. (2022) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4054090 · Cited by 9
Online Transfer Learning-based Method for Predicting Remaining Useful Life of Aero-engines
Han, X., Xiang, G., Cui, L., Wang, J., Zhang, Q., Lin, R., Jin, Y., & Liu, H. (2022) · International Conference on Intelligent Computing and Signal Processing (ICSP) · doi:10.1109/icsp54964.2022.9778844 · Cited by 9
Cross-Domain Remaining Useful Life Prediction Based on Adversarial Training
Duan, Y., Xiao, J., Li, H., & Zhang, J. (2022) · Machines · doi:10.3390/machines10060438 · Cited by 13
Zeybek, S. (2022) · Springer series in advanced manufacturing · doi:10.1007/978-3-031-14537-7_21 · Cited by 12
Statistical approach to online prognostics of turbine engine components
Zein-Sabatto, S., Bodruzzaman, J., & Mikhail, M. B. (2013) · IEEE SoutheastCon · doi:10.1109/secon.2013.6567479 · Cited by 9
Parsimonious Kernel Recursive Least Squares Algorithm for Aero-Engine Health Diagnosis
Zhou, H., Huang, J., & Lü, F. (2018) · IEEE Access · doi:10.1109/access.2018.2882824 · Cited by 9
ADAPTIVE SCHEDULING THROUGH MACHINE LEARNING-BASED PROCESS PARAMETER PREDICTION
Frye, M., Gyulai, D., Bergmann, J. P., & Schmitt, R. H. (2019) · MM Science Journal · doi:10.17973/mmsj.2019_11_2019051 · Cited by 9
A Multimode Anomaly Detection Method Based on OC-ELM for Aircraft Engine System
Chen, S., Wu, M., Wen, P., Xu, F., Wang, S., & Zhao, S. (2021) · IEEE Access · doi:10.1109/access.2021.3057795 · Cited by 8
Jang, J. (2022) · Soft Computing · doi:10.1007/s00500-022-07625-4 · Cited by 8
A new method of fault diagnosis for aeroengines with dispersedly clumped gas path parameters
Liu, Q., & Huang, X. (2024) · Aerospace Science and Technology · doi:10.1016/j.ast.2024.109065 · Cited by 8
Sharma, R. K. (2024) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-024-01922-w · Cited by 8
Hu, Y., Li, X., Wang, H., Liu, Y., Liu, X., & Cao, Z. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3398070 · Cited by 8
Online industrial fault prognosis in dynamic environments via task-free continual learning
Liu, C., Zhang, L., Zheng, Y., Jiang, Z., Zheng, J., & Wu, C. (2024) · Neurocomputing · doi:10.1016/j.neucom.2024.127930 · Cited by 12
Chen, L., Gao, H.-L., Guo, L., Sun, Y., Lei, Y.-C., & Liang, J. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02459-3 · Cited by 8
Li, B., Li, J., & Li, Z. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.08.285 · Cited by 8
A Dual-Dimension Convolutional-Attention Module for Remaining Useful Life Prediction of Aeroengines
Zhu, Y., & Liu, Z. (2024) · Aerospace · doi:10.3390/aerospace11100809 · Cited by 11
Nagaraj, S., & Hickok, T. (2024) · IEEE/AIAA Digital Avionics Systems Conference (DASC) · doi:10.1109/dasc62030.2024.10749490 · Cited by 8
AI4I-PMDI: Predictive maintenance datasets with complex industrial settings’ irregularities
Autran, J.-V., Kuhn, V., Diguet, J.-P., Dubois, M., & Buche, C. (2024) · Procedia Computer Science · doi:10.1016/j.procs.2024.09.546 · Cited by 20
Wang, E., Zhou, H., Wen, G., Liu, Z., & Chen, X. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3509601 · Cited by 8
Wang, R., Zhang, Y., Hu, C., Yang, Z., Li, H., Liu, F., Li, L., & Guo, J. (2024) · Processes · doi:10.3390/pr12122925 · Cited by 8
Wu, C., He, J., Li, G., Xu, W., & Liu, S. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3527602 · Cited by 8
Chen, L., Gao, H., Guo, L., Liang, J., & Lin, P. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.110059 · Cited by 10
Lv, S., Liu, S., & Li, H. (2025) · Quality and Reliability Engineering International · doi:10.1002/qre.3740 · Cited by 8
Shan, Y., Xiao, L., & Fang, X. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3545540 · Cited by 9
Hu, Q., Su, B., Kong, J., & Liu, W. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3560066 · Cited by 9
Remaining Useful Life Prediction of Aero-Engine Based on Improved GWO and 1DCNN
Shen, L., Wang, Y., Du, B., Hong-xi, Y., & Fan, H. (2025) · Machines · doi:10.3390/machines13070583 · Cited by 12
Liu, Z., Sun, T., & Sun, X. (2025) · Energy · doi:10.1016/j.energy.2025.137253 · Cited by 11
Wang, H., Ren, L., Zhao, T., & Jiao, L. (2025) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2025.3594229 · Cited by 20
Han, B., Li, B., Zhang, Y., Feng, P., Wolter, K., Zhang, H. Y., Li, Y., Jurdak, R., & Yuen, C. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3600225 · Cited by 13
Denoising and Adaptive Online Vertical Federated Learning for Sequential Multi-Sensor Data in IIoT
Wang, H., Zhong, X., Liu, K., Liu, F., & Zhang, W. (2025) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2025.3608244 · Cited by 10
Predictive maintenance programs for aircraft engines based on remaining useful life prediction
Xue, F., Jin, G., Tan, L., Zhang, C., & Yu, Y. (2025) · Scientific Reports · doi:10.1038/s41598-025-19957-w · Cited by 17
Tian, L., Gao, Y., Li, X., & Gao, L. (2026) · Computers & Industrial Engineering · doi:10.1016/j.cie.2026.111877 · Cited by 8
Juesas, P., & Ramasso, E. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.03.022 · Cited by 8
Huang, C., Men, C., Yazdi, M., Yu, H., & Peng, W. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09452-1 · Cited by 9
Interaction models for remaining useful lifetime estimation
Zhevnenko, D. A., Kazantsev, M., & Makarov, I. (2023) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2023.100444 · Cited by 8
Machine Learning-Based Predictive Maintenance: Using CNN – LSTM network
Habib, M. K., & Mohamed, K. (2023) · IEEE International Conference on Mechatronics and Automation (ICMA) · doi:10.1109/icma57826.2023.10216091 · Cited by 12
Li, R., Zhan, H., Yu, J., Wang, R., & Han, K. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/ad0ad5 · Cited by 8
Lu, J., Jiang, W., Xu, Y., Chen, Z., & Ni, K. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad3b2e · Cited by 8
Huang, Z., He, Y., Nivarthi, C. P., Gruhl, C., & Sick, B. (2024) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn60899.2024.10650622 · Cited by 10
Sanayha, M., & Vateekul, P. (2019) · Walailak Journal of Science and Technology (WJST) · doi:10.48048/wjst.2019.4144 · Cited by 8
Prognostic of RUL based on Echo State Network Optimized by Artificial Bee Colony
Simeón, E. J. A., & Álvares, A. J. (2020) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2016.v7i1.2359 · Cited by 10
Self-supervised Multi-stage Estimation of Remaining Useful Life for Electric Drive Units
Vazquez, I. M., Doelling, R., & Bringmann, O. (2019) · IEEE International Conference on Big Data (BigData) · doi:10.1109/bigdata47090.2019.9005535 · Cited by 8
Tang, J., & Xiao, L. (2020) · Prognostics and System Health Management Conference · doi:10.1109/phm-jinan48558.2020.00030 · Cited by 8
Customizable Asymmetric Loss Functions for Machine Learning-based Predictive Maintenance
Ehrig, L., Atzberger, D., Hagedorn, B., Klimke, J., & Döllner, J. (2020) · International Conference on Condition Monitoring and Diagnosis (CMD) · doi:10.1109/cmd48350.2020.9287246 · Cited by 11
Hu, J., Qian, X., Cheng, H., Tan, C., & Liu, X. (2021) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-210740 · Cited by 9
Universal Adversarial Attack on Deep Learning Based Prognostics
Basak, A., Rathore, P. K., Nistala, S. H., Srinivas, S., & Runkana, V. (2021) · International Conference on Machine Learning and Applications · doi:10.1109/icmla52953.2021.00012 · Cited by 8
Building Local Models for Flexible Degradation Modeling and Prognostics
Song, C., Zheng, Z., & Liu, K. (2021) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2021.3124144 · Cited by 8
Incremental Learning Vector Auto Regression for Forecasting with Edge Devices
Pesala, V., Paul, T. K., Ueno, K., Bugata, H. G. S. P., & Kesarwani, A. (2021) · International Conference on Machine Learning and Applications · doi:10.1109/icmla52953.2021.00188 · Cited by 8
A Framework for Generating Large Data Sets for Fatigue Damage Prognostic Problems
Akrim, A., Gogu, C., de Nerville, T. G., Strähle, P., Pagou, B. W., Salaün, M., & Vingerhoeds, R. A. (2022) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm53196.2022.9815692 · Cited by 10
An ensemble model considering health index based classification for remaining useful life prediction
Han, T., & Li, Y. (2022) · Quality and Reliability Engineering International · doi:10.1002/qre.3256 · Cited by 8
Lyu, Y., Zhang, Q., Chen, A., & Wen, Z. (2023) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein/165811 · Cited by 10
Integrating Explicit Contexts with Recurrent Neural Networks for Improving Prognostic Models
Baruah, R. D., & Muñoz-Organero, M. (2023) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero55745.2023.10115751 · Cited by 8
Kong, C., Yu, W., Zeng, Q., Chen, Z., & Peng, Y. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/ace20b · Cited by 8
Classification with imperfect labels for fault prediction
Xue, Y., Williams, D. P., & Qiu, H. (2011) · doi:10.1145/2018673.2018676 · Cited by 8
Remaining useful life prognostics using pattern-based machine learning
Ragab, A., Yacout, S., & Ouali, M.-S. (2016) · Annual Reliability and Maintainability Symposium (RAMS) · doi:10.1109/rams.2016.7448025 · Cited by 8
Modeling Sensor Networks for Predictive Maintenance
Zenisek, J., Wolfartsberger, J., Sievi, C., & Affenzeller, M. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-11683-5_20 · Cited by 8
LiRUL: A Lightweight LSTM Based Model for Remaining Useful Life Estimation at the Edge
Kayode, O., & Tosun, A. Ş. (2019) · IEEE Annual International Computer Software and Applications Conference (COMPSAC) · doi:10.1109/compsac.2019.10203 · Cited by 9
Particle Filtering-Based System Degradation Prediction Applied to Jet Engines
Wang, P. E., & Gao, R. X. (2014) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2014.v6i1.2516 · Cited by 8
Prognostics and Health Management
Varde, P. V., & PECHT, M. G. (2018) · Springer series in reliability engineering · doi:10.1007/978-981-13-0090-5_13 · Cited by 9
Survey of prognostics methods for condition-based maintenance in engineering systemsPreprint
Taheri, E., Kolmanovsky, I. V., & Gusikhin, O. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1912.02708 · Cited by 12
Nor, A. K. M., Pedapati, S. R., & Muhammad, M. B. (2021) · Preprints.org · doi:10.20944/preprints202109.0034.v1 · Cited by 9
PHMD: An easy data access tool for prognosis and health management datasets
Solis‐Martín, D., Galán‐Paez, J., & Borrego‐Díaz, J. (2025) · SoftwareX · doi:10.1016/j.softx.2025.102039 · Cited by 13
Trustworthy 6G-Powered Industrial IoT for Resilient Intelligent Manufacturing
Tian, J., Min, H., Hu, J. W., & Li, W. (2025) · IEEE Wireless Communications · doi:10.1109/mwc.001.2400303 · Cited by 7
Liu, H., Sun, Y., Wang, X., Wu, H., Guo, Y., & Wang, H. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.111085 · Cited by 9
Multichannel Attention-Based TCN-GRU Network for Remaining Useful Life Prediction of Aero-Engines
Zou, J., & Lin, P. (2025) · Energies · doi:10.3390/en18081899 · Cited by 7
Sun, B., Pan, J., Wu, Z., Feng, Q., Chen, L., & Wang, Z. (2025) · Expert Systems with Applications · doi:10.1016/j.eswa.2025.127835 · Cited by 10
DT-PPO: A Real-Time multisensor-driven predictive maintenance framework
Zhou, K., Zhong, X., Shao, H., Zhang, H., & Liu, B. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.111227 · Cited by 10
Fu, S., Wang, Y., Lin, L., Zhao, M., Zu, L., Lu, Y., Guo, F., Suo, S., Liu, Y., Zhang, S., et al. (2025) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2025.125126 · Cited by 10
Performance benchmarking of multimodal data-driven approaches in industrial settings
Altinses, D., & Schwung, A. (2025) · Machine Learning with Applications · doi:10.1016/j.mlwa.2025.100691 · Cited by 10
A two-stage subdomain adaptation network for machinery remaining useful life prediction
Fan, Z., Chen, Y., Liu, X., & Zhang, D. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.111421 · Cited by 8
Zhang, Y., Du, M., & Miao, Q. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3610545 · Cited by 7
Towards Autonomous Knowledge Creation from Big Data in Smart Cities
Nowaczyk, S., Rognvaldsson, T. S., Fan, Y., & Calikus, E. (2020) · Springer eBooks · doi:10.1007/978-3-030-15145-4_38-1 · Cited by 12
RUSHAP: A Unified approach to interpret Deep Learning model for Remaining Useful Life Estimation
Wang, Y., Li, Y., Zhang, Y., Yang, Y., & Liu, L. (2021) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-nanjing52125.2021.9612945 · Cited by 8
A method for predictive maintenance of mechanical equipment based on Transferable CNN-LSTM
Du, J., Gui, X., Song, L., Gao, S., Zhang, C., & Li, X. (2022) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-yantai55411.2022.9941744 · Cited by 8
A multi-sensor fusion-based prognostic model for systems with partially observable failure modes
Wu, H., & Li, Y. (2023) · IISE Transactions · doi:10.1080/24725854.2023.2222402 · Cited by 7
Ensemble Neural Networks for Remaining Useful Life (RUL) Prediction
Srinivasan, A., Andresen, J. C., & Holst, A. (2023) · PHM Society Asia-Pacific Conference · doi:10.36001/phmap.2023.v4i1.3611 · Cited by 9
Huang, M., Zhang, K., Li, Z., & Li, J. (2023) · Journal of Turbomachinery · doi:10.1115/1.4064081 · Cited by 7
Remaining Useful Life Prediction via Frequency Emphasizing Mix-Up and Masked Reconstruction
Guo, H., Zhu, H., Wang, J., Vadakkepat, P., Ho, W. K., de Silva, C. W., & Lee, T. H. (2024) · IEEE Transactions on Artificial Intelligence · doi:10.1109/tai.2024.3396422 · Cited by 10
Nunes, P., Rocha, E. M., & Santos, J. P. O. (2024) · Future Internet · doi:10.3390/fi16060214 · Cited by 7
Barry, I., Hafsi, M., & Qaisar, S. M. (2024) · Lecture notes in networks and systems · doi:10.1007/978-3-031-60591-8_3 · Cited by 7
Wang, Y., Suo, C., & Zhao, Y. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad8b62 · Cited by 10
A new dual-channel transformer-based network for remaining useful life prediction
Yang, K., Wei, Y., Ma, Y., Huang, L., Tang, Q., & Li, Z. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad9e12 · Cited by 8
Solís-Martín, D., Galán-Páez, J., & Borrego-Díaz, J. (2025) · Mathematics · doi:10.3390/math13040555 · Cited by 7
Cao, L., Li, Y., Chen, J., Wu, W., & Zhang, H. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3560753 · Cited by 21
Metadata
- Authors
- Saxena, A., Goebel, K., Simon, D., & Eklund, N.
- Affiliations
- Ames Research Center (US)
- Glenn Research Center (US)
- GE Global Research (United States) (US)
- Venue
- 2008 International Conference on Prognostics and Health Management
- Publisher
- IEEE
- Published
- 2008-10
- Pages
- 1-9
- OpenAlex
- W2120841219
- Cited by
- 1,954
- References
- 15
- Citations by year
- 2026: 219 · 2025: 290 · 2024: 270 · 2023: 260 · 2022: 206 · 2021: 204 · 2020: 154 · 2019: 106 · 2018: 57 · 2017: 46 · 2016: 41 · 2015: 21 · 2014: 18 · 2013: 17 · 2012: 16
- FWCI
- 16.45
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Prognostics and Health Management (PHM) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Automotive Engineering › Technical Engine Diagnostics and Monitoring
- Keywords
- damage propagation, aircraft gas turbine engines, prognostics and health management, health indicators, failure criteria, response surface, sensor data
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.