The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Damage propagation modeling for aircraft engine run-to-failure simulation
Abstract
This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the prognostics and health management (PHM) data competition at PHMpsila08.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“has become a pivotal resource for researchers and practitioners in the field of prognostics and health management, allowing for the realistic simulation and testing of PdM models”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“This dataset, developed through damage propagation modeling for aircraft engine run-to-failure simulation, has become a pivotal resource for researchers and practitioners in the field of prognostics and health management”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. (2008)
In the citing paper
“In addition, a custom S-score, given by Saxena et al. [[21](https://doi.org/10.3390/fi17060244#B21-futureinternet-17-00244)], is employed to evaluate prognostic performance by asymmetrically penalizing over-estimations and under-estimations.”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. [21]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The M3-Competition: results, conclusions and implications
Makridakis, S., & Hibon, M. (2000) · International Journal of Forecasting · doi:10.1016/s0169-2070(00)00057-1 · Cited by 1,695
The accuracy of extrapolation (time series) methods: Results of a forecasting competition
Makridakis, S., Andersen, A., Carbone, R., Fildes, R., Hibon, M., Lewandowski, R., Newton, J., Parzen, E., & Winkler, R. (1982) · Journal of Forecasting · doi:10.1002/for.3980010202 · Cited by 1,462
Metrics for evaluating performance of prognostic techniques
Saxena, A., Celaya, J., Balaban, E., Goebel, K., Saha, B., Saha, S., & Schwabacher, M. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711436 · Cited by 518
Self-citationStandardizing the Performance Evaluation of Short-Term Wind Power Prediction Models
Madsen, H., Pinson, P., Kariniotakis, G., Nielsen, H. A., & Nielsen, T. S. (2005) · Wind Engineering · doi:10.1260/030952405776234599 · Cited by 343
User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)
Frederick, D. K., DeCastro, J., & Litt, J. S. (2007) · NASA Technical Reports Server (NASA) · Cited by 259
Time series prediction competition: The CATS benchmark
Lendasse, A., Erkki Oja, A., Simula, O., & Verleysen, M. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.02.013 · Cited by 96
Online Model Parameter Estimation of Jet Engine Degradation for Autonomous Propulsion Control
Chatterjee, S., & Litt, J. S. (2003) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2003-5425 · Cited by 46
Kobayashi, T., & Simon, D. L. (2004) · doi:10.1115/gt2004-53640 · Cited by 43
Self-citationApplication of Autoassociative Neural Network on Gas-Path Sensor Data Validation
Lu, P.-J., & Hsu, T.-C. (2002) · Journal of Propulsion and Power · doi:10.2514/2.6013 · Cited by 35
Probabilistic Matching of Turbofan Engine Performance Models to Test Data
Roth, B. A., Doel, D. L., & Cissell, J. J. (2005) · doi:10.1115/gt2005-68201 · Cited by 34
Research works printed but not linked: 2
- 0, E-Handbook of Statistical Methods
- 0, NN5 Forecasting Compotition for Artificial Neural Networks & Computational Intelligence
Cited by
Items 401–500 of 1,001
Liu, C., Zhang, L., Yao, R., & Wu, C. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3053992 · Cited by 42
Shang, Z., Zhang, B., Li, W., Qian, S., & Zhang, J. (2021) · Complex & Intelligent Systems · doi:10.1007/s40747-021-00606-4 · Cited by 41
Huang, C., Zhu, J., Yu, H., & Peng, W. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3133622 · Cited by 40
Zhao, C., Huang, X., Li, Y., & Li, S. (2021) · Measurement · doi:10.1016/j.measurement.2021.110637 · Cited by 39
Li, L., Xu, J., & Li, J. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107125 · Cited by 39
Li, Y., Chen, Y., Shao, H., & Zhang, H. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109514 · Cited by 41
Zhan, Y., Kong, Z., Wang, Z., Jin, X., & Xu, Z. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.110383 · Cited by 53
Life prediction of jet engines based on LSTM-recurrent neural networks
Dong, D., Li, X., & Sun, F. (2017) · Prognostics and System Health Management Conference · doi:10.1109/phm.2017.8079264 · Cited by 41
eXplainable and Reliable Against Adversarial Machine Learning in Data Analytics
Vaccari, I., Carlevaro, A., Narteni, S., Cambiaso, E., & Mongelli, M. (2022) · IEEE Access · doi:10.1109/access.2022.3197299 · Cited by 48
Wahid, A., Yahya, M., Breslin, J. G., & Intizar, M. A. (2023) · Procedia Computer Science · doi:10.1016/j.procs.2022.12.241 · Cited by 46
Cheng, Y., Zeng, J., Wang, Z., & Song, D. (2023) · Applied Soft Computing · doi:10.1016/j.asoc.2023.110041 · Cited by 40
A deep attention based approach for predictive maintenance applications in IoT scenarios
Luca, R. D., Ferraro, A., Galli, A., Gallo, M., Moscato, V., & Sperlí, G. (2023) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-02-2022-0093 · Cited by 46
Goby, N., Brandt, T., & Neumann, D. (2023) · Computers & Industrial Engineering · doi:10.1016/j.cie.2023.109165 · Cited by 48
Life-cycle modeling driven by coupling competition degradation for remaining useful life prediction
Li, Y., Zhou, Z., Sun, C., Peng, J., Nandi, A. K., & Yan, R. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109480 · Cited by 38
Liu, H., Sun, Y., Ding, W., Wu, H., & Zhang, H. (2024) · Measurement · doi:10.1016/j.measurement.2024.114242 · Cited by 42
Faizanbasha, A., & Rizwan, U. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.110919 · Cited by 38
Guidotti, D., Pandolfo, L., & Pulina, L. (2025) · IEEE Access · doi:10.1109/access.2025.3578686 · Cited by 47
Liu, C., Zhang, L., Liao, Y. J., Wu, C., & Peng, G. (2019) · IEEE Access · doi:10.1109/access.2019.2925634 · Cited by 39
Berghout, T., Mouss, L. H., Kadri, O., Saïdi, L., & Benbouzid, M. (2020) · Applied Sciences · doi:10.3390/app10031062 · Cited by 38
Predictive Maintenance for Edge-Based Sensor Networks: A Deep Reinforcement Learning Approach
Ong, K. S. H., Niyato, D. T., & Yuen, C. (2020) · IEEE World Forum on Internet of Things (WF-IoT) · doi:10.1109/wf-iot48130.2020.9221098 · Cited by 38
Remaining useful life prediction based on intentional noise injection and feature reconstruction
Xiao, L., Tang, J., Zhang, X., Bechhoefer, E. R., & Ding, S. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107871 · Cited by 39
Similarity-based prediction method for machinery remaining useful life: A review
Xue, B., Xu, H., Huang, X., Zhu, K., Xu, Z., & Pei, H. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09280-3 · Cited by 38
Viale, L., Daga, A. P., Fasana, A., & Garibaldi, L. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110154 · Cited by 37
On the Soundness of XAI in Prognostics and Health Management (PHM)
Solis‐Martín, D., Galán‐Paez, J., & Borrego‐Díaz, J. (2023) · Information · doi:10.3390/info14050256 · Cited by 48
Arunan, A., Qin, Y., Li, X., & Yuen, C. (2024) · Control Engineering Practice · doi:10.1016/j.conengprac.2023.105840 · Cited by 39
Xie, S., Cheng, W., Nie, Z., Xing, J., Chen, X., Gao, L., Xu, Z., & Zhang, R. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2024.3359455 · Cited by 43
Towards trustworthy AI in Industry 5.0: Ante-hoc interpretability with deep learning
Zhou, L., Chen, L., Zhu, T., Su, X., Dong, Y., Wen, L., Liu, H., Lu, X., Leng, J., Liu, Q., et al. (2026) · Computers & Industrial Engineering · doi:10.1016/j.cie.2026.111805 · Cited by 55
Echo State Network for the Remaining Useful Life Prediction of a Turbofan Engine
Rigamonti, M., Baraldi, P., Zio, E., Roychoudhury, I., Goebel, K., & Poll, S. D. (2016) · PHM Society European Conference · doi:10.36001/phme.2016.v3i1.1623 · Cited by 38
Self-citationChallenges and Opportunities of System-Level Prognostics
Kim, S., Choi, J.-H., & Kim, N. H. (2021) · Sensors · doi:10.3390/s21227655 · Cited by 42
You, M., & Meng, G. (2013) · IEEE Transactions on Reliability · doi:10.1109/tr.2013.2241203 · Cited by 38
Transfer Learning for Prognostics and Health Management (PHM) of Marine Air Compressors
Gribbestad, M., Hassan, M. U., & Hameed, I. A. (2021) · Journal of Marine Science and Engineering · doi:10.3390/jmse9010047 · Cited by 41
An Explainable Artificial Intelligence Approach for Remaining Useful Life Prediction
Youness, G., & Aalah, A. (2023) · Aerospace · doi:10.3390/aerospace10050474 · Cited by 38
Cannarile, F., Baraldi, P., & Zio, E. (2018) · Fuzzy Sets and Systems · doi:10.1016/j.fss.2018.10.008 · Cited by 36
Remaining Useful Life Prediction of Airplane Engine Based on PCA–BLSTM
Ji, S., Han, X., Hou, Y., Song, Y. H., & Du, Q. (2020) · Sensors · doi:10.3390/s20164537 · Cited by 38
Multi-Objective Hybrid Artificial Intelligence Approach for Fault Diagnosis of Aerospace Systems
Ezzat, D., Hassanien, A. E., Darwish, A. A., Yahia, M., Ahmed, A. M., & Abdelghafar, S. (2021) · IEEE Access · doi:10.1109/access.2021.3064976 · Cited by 41
Güngör, O., Rosing, T., & Akşanlı, B. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103660 · Cited by 40
Schwartz, S., Montero-Jiménez, J. J., Vingerhoeds, R. A., & Salaün, M. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103716 · Cited by 39
Remaining useful life estimation without needing for prior knowledge of the degradation features
Benmoussa, S., & Djeziri, M. (2017) · IET Science Measurement & Technology · doi:10.1049/iet-smt.2017.0005 · Cited by 35
Song, P.-C., Chu, S., Pan, J., & Yang, H.-M. (2020) · International Conference on Industrial Artificial Intelligence (IAI) · doi:10.1109/iai50351.2020.9262236 · Cited by 35
Maulana, F., Starr, A. G., & Ompusunggu, A. P. (2023) · Machines · doi:10.3390/machines11020163 · Cited by 35
Evolutionary neural architecture search on transformers for RUL prediction
Mo, H., & Iacca, G. (2023) · Materials and Manufacturing Processes · doi:10.1080/10426914.2023.2199499 · Cited by 42
Wu, B., Shi, H., Zeng, J., Zhang, X., & Wang, Z. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110767 · Cited by 35
Zhang, J., Luo, H., Hu, J., Cheng, C., Wu, S., Yan, P., & Tian, J. (2025) · IEEE Transactions on Reliability · doi:10.1109/tr.2025.3643102 · Cited by 35
Multistate degradation and supervised estimation methods for a condition-monitored device
Moghaddass, R., & Zuo, M. J. (2013) · IIE Transactions · doi:10.1080/0740817x.2013.770188 · Cited by 35
Deep Learning Approaches to Aircraft Maintenance, Repair and Overhaul: A Review
Rengasamy, D., Morvan, H. P., & Figueredo, G. P. (2018) · IEEE International Conference on Intelligent Transportation Systems (ITSC) · doi:10.1109/itsc.2018.8569502 · Cited by 40
Son, K. L., Fouladirad, M., & Barros, A. (2012) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2012.6299520 · Cited by 47
Probabilistic Remaining Useful Life Prediction Based on Deep Convolutional Neural NetworkPreprint
Zhao, Z., Wu, J., Wong, D., Sun, C., & Yan, R. (2020) · SSRN Electronic Journal · doi:10.2139/ssrn.3717738 · Cited by 35
Remaining Useful Life Prediction via Spatio-Temporal Channels and Transformer
Zeng, M., Wu, F. H., & Cheng, Y. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3324330 · Cited by 34
Chia, J. W. Y., Verhagen, W. J. C., Silva, J. M., & Cole, I. S. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.09.024 · Cited by 44
Bayesian-Driven Optimization of MDCNN-LSTM-RSA: A New Model for Predicting Aeroengine RUL
Anping, W., Zhang, H., AL-Bukhaiti, K., Cheng, X., Ji, X., Wang, J., & Shan, T. (2025) · IEEE Transactions on Reliability · doi:10.1109/tr.2025.3574975 · Cited by 34
Bektaş, O., Marshall, J., & Jones, J. A. (2019) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09339-7 · Cited by 34
Physics-guided Gaussian process for HVAC system performance prognosis
Zhang, J., Liu, C., & Gao, R. X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109336 · Cited by 36
Pei, H., Si, X., Li, T., Zhang, Z., & Lei, Y. (2024) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2023.3310482 · Cited by 33
Xiahou, T., Wang, F., Liu, Y., & Zhang, Q. (2023) · IEEE Transactions on Reliability · doi:10.1109/tr.2023.3277332 · Cited by 35
Alberto, J., Ruiz-Sarmiento, J.-R., & González-Jiménez, J. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107365 · Cited by 40
Zhou, J., Yang, J., Qian, Q., & Qin, Y. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad2bcc · Cited by 41
RETRACTED: Mixup domain adaptations for dynamic remaining useful life predictions
Furqon, M., Pratama, M., Liu, L., Habibullah, H., & Doğançay, K. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2024.111783 · Cited by 34
RetractedRemaining useful life prediction based on parallel multi-scale feature fusion network
Yin, Y., Tian, J., & Liu, X. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02399-y · Cited by 33
Wu, C., He, J., Wang, L., Ma, C., & Liu, Y. (2025) · Computers & Industrial Engineering · doi:10.1016/j.cie.2025.110964 · Cited by 33
Li, Q., Gao, Z., Tang, D., & Li, B. (2016) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2016.04.007 · Cited by 33
A Novel Deep Learning Approach for Machinery Prognostics Based on Time Windows
Yang, H., Zhao, F., Jiang, G., Sun, Z., & Mei, X. (2019) · Applied Sciences · doi:10.3390/app9224813 · Cited by 33
Fusing physics-based and deep learning models for prognostics
Chao, M. A., Kulkarni, C. S., Goebel, K., & Fink, O. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107961 · Cited by 441
Self-citationWang, Z., Chen, Y., Cai, Z., Gao, Y., & Wang, L. (2020) · Journal of Systems Engineering and Electronics · doi:10.23919/jsee.2020.000018 · Cited by 33
Remaining useful life prediction based on state assessment using edge computing on deep learning
Hsu, H.-Y., Srivastava, G., Wu, H., & Chen, M. (2020) · Computer Communications · doi:10.1016/j.comcom.2020.05.035 · Cited by 37
Just-in-time learning based probabilistic gradient boosting tree for valve failure prognostics
Li, X., Mba, D., Lin, T. R., Yang, Y., & Loukopoulos, P. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107253 · Cited by 36
A Deep Gaussian Process Approach for Predictive Maintenance
Zeng, J., & Liang, Z. (2022) · IEEE Transactions on Reliability · doi:10.1109/tr.2022.3199924 · Cited by 33
Wang, D., & Liu, K. (2023) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2023.3242355 · Cited by 33
Lin, Y., Liu, K., Byon, E., Qian, X., Liu, S., & Huang, S. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2767941 · Cited by 43
Remaining useful life prognosis of turbofan engines based on deep feature extraction and fusion
Peng, C., Chen, Y., Gui, W., Tang, Z., & Li, C. (2022) · Scientific Reports · doi:10.1038/s41598-022-10191-2 · Cited by 32
TruFLaaS: Trustworthy Federated Learning as a Service
Mazzocca, C., Romandini, N., Mendula, M., Montanari, R., & Bellavista, P. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3282899 · Cited by 42
Chen, Y., Liu, D., Ding, X., & Jiang, H. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.102316 · Cited by 33
Li, H., Cao, P., Wang, X., Li, Y., Yi, B., & Huang, M. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102517 · Cited by 40
TranDRL: A Transformer-Driven Deep Reinforcement Learning Enabled Prescriptive Maintenance Framework
Zhao, Y., Yang, J., Wang, W., Yang, H., & Niyato, D. T. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3436110 · Cited by 45
Wang, S., Liu, M., & Dong, Z. (2024) · Computers & Industrial Engineering · doi:10.1016/j.cie.2024.110496 · Cited by 32
A CNN-based approach for anomaly detection in smart grid systems
Priyadarsini, M., & Sonekar, N. (2024) · Electric Power Systems Research · doi:10.1016/j.epsr.2024.111077 · Cited by 32
Causal graph-based spatial–temporal attention network for RUL prediction of complex systems
Zheng, S., Liu, J., Chen, Y., Fan, Y., & Xu, D. (2025) · Computers & Industrial Engineering · doi:10.1016/j.cie.2025.110892 · Cited by 32
Paredes, J., Chávez, D., Isa-Jara, R., & Vargas, D. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105137 · Cited by 37
Yuan, J., Lei, Y., Li, N., Yang, B., Li, X., Chen, Z., & Han, W. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.111424 · Cited by 32
Hu, C. K., Youn, B. D., Kim, T., & Wang, P. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.03.004 · Cited by 32
Liu, L., Wang, S., Liu, D., & Peng, Y. (2017) · Microelectronics Reliability · doi:10.1016/j.microrel.2017.03.008 · Cited by 34
Related Entropy Theories Application in Condition Monitoring of Rotating Machineries
Liu, L., Zhi, Z., Zhang, H., Guo, Q., Peng, Y., & Liu, D. (2019) · Entropy · doi:10.3390/e21111061 · Cited by 32
Wang, Y., Wu, J., Cheng, Y., Wang, J., & Hu, K. (2021) · Measurement · doi:10.1016/j.measurement.2021.110354 · Cited by 32
Remaining Useful Life Estimation for Turbofan Engine with Transformer-based Deep Architecture
Ma, Q., Zhang, M., Xu, Y., Song, J., & Zhang, T. (2021) · International Conference on Automation and Computing (ICAC) · doi:10.23919/icac50006.2021.9594150 · Cited by 32
Li, Y., Huang, X., Zhao, C., & Ding, P. (2022) · ISA Transactions · doi:10.1016/j.isatra.2022.04.042 · Cited by 33
Wang, Y., Lei, Y., Li, N., Gao, X., Liu, X., Ren, Q., & Jiang, J. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.110025 · Cited by 32
Automated Performance Tracking for Heat Exchangers in HVAC
Wang, P. E., & Gao, R. X. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2666184 · Cited by 31
Chen, G., Chen, J., Zi, Y., Pan, J. H., & Han, W. (2017) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2017.12.009 · Cited by 32
A Double Hybrid State-Space Model for Real-Time Sensor-Driven Monitoring of Deteriorating Systems
Skordilis, E., & Moghaddass, R. (2019) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2019.2921285 · Cited by 31
Multi-sensor slope change detection
Cao, Y., Xie, Y., & Gebraeel, N. (2016) · Annals of Operations Research · doi:10.1007/s10479-016-2185-5 · Cited by 31
Bala, A., Ismail, I. B., Ibrahim, R., Sait, S. M., & Oliva, D. A. (2020) · IEEE Access · doi:10.1109/access.2020.3020356 · Cited by 33
Remaining useful life prediction using composite health index and hybrid LSTM‐SVR model
Gu, L., Zheng, R., Zhou, Y., Zhang, Z., & Zhao, K. (2022) · Quality and Reliability Engineering International · doi:10.1002/qre.3151 · Cited by 31
Learning of physical health timestep using the LSTM network for remaining useful life estimation
Bae, J., & Xi, Z. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108717 · Cited by 32
Berghout, T., Mouss, M. D., Mouss, L. H., & Benbouzid, M. (2022) · Aerospace · doi:10.3390/aerospace10010010 · Cited by 31
Niu, H., Zeng, J., Shi, H., Zhang, X., & Liang, J. (2022) · Computers & Industrial Engineering · doi:10.1016/j.cie.2022.108889 · Cited by 31
El-Koujok, M., Gouriveau, R., & Noureddine Zerhouni, A. (2010) · Microelectronics Reliability · doi:10.1016/j.microrel.2010.09.014 · Cited by 31
An Industrial Multi Agent System for real-time distributed collaborative prognostics
Palau, A. S., Dhada, M. H., Bakliwal, K., & Parlikad, A. K. (2019) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2019.07.013 · Cited by 35
Wang, G., Zhang, Y., Lu, M.-F., & Wu, Z. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acb83e · Cited by 30
Zhu, Q., Xiong, Q., Yang, Z., & Yang, Y. (2023) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2023.123369 · Cited by 30
Zeng, J., & Liang, Z. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109456 · Cited by 30
Gao, J., Wang, Y., & Sun, Z. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad3b2c · Cited by 36
Metadata
- Authors
- Saxena, A., Goebel, K., Simon, D., & Eklund, N.
- Affiliations
- Ames Research Center (US)
- Glenn Research Center (US)
- GE Global Research (United States) (US)
- Venue
- 2008 International Conference on Prognostics and Health Management
- Publisher
- IEEE
- Published
- 2008-10
- Pages
- 1-9
- OpenAlex
- W2120841219
- Cited by
- 1,954
- References
- 15
- Citations by year
- 2026: 219 · 2025: 290 · 2024: 270 · 2023: 260 · 2022: 206 · 2021: 204 · 2020: 154 · 2019: 106 · 2018: 57 · 2017: 46 · 2016: 41 · 2015: 21 · 2014: 18 · 2013: 17 · 2012: 16
- FWCI
- 16.45
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Prognostics and Health Management (PHM) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Automotive Engineering › Technical Engine Diagnostics and Monitoring
- Keywords
- damage propagation, aircraft gas turbine engines, prognostics and health management, health indicators, failure criteria, response surface, sensor data
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.