Damage propagation modeling for aircraft engine run-to-failure simulation
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the prognostics and health management (PHM) data competition at PHMpsila08.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“has become a pivotal resource for researchers and practitioners in the field of prognostics and health management, allowing for the realistic simulation and testing of PdM models”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“This dataset, developed through damage propagation modeling for aircraft engine run-to-failure simulation, has become a pivotal resource for researchers and practitioners in the field of prognostics and health management”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. (2008)
In the citing paper
“In addition, a custom S-score, given by Saxena et al. [[21](https://doi.org/10.3390/fi17060244#B21-futureinternet-17-00244)], is employed to evaluate prognostic performance by asymmetrically penalizing over-estimations and under-estimations.”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. [21]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The M3-Competition: results, conclusions and implications
Makridakis, S., & Hibon, M. (2000) · International Journal of Forecasting · doi:10.1016/s0169-2070(00)00057-1 · Cited by 1,695
The accuracy of extrapolation (time series) methods: Results of a forecasting competition
Makridakis, S., Andersen, A., Carbone, R., Fildes, R., Hibon, M., Lewandowski, R., Newton, J., Parzen, E., & Winkler, R. (1982) · Journal of Forecasting · doi:10.1002/for.3980010202 · Cited by 1,462
Metrics for evaluating performance of prognostic techniques
Saxena, A., Celaya, J., Balaban, E., Goebel, K., Saha, B., Saha, S., & Schwabacher, M. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711436 · Cited by 518
Self-citationStandardizing the Performance Evaluation of Short-Term Wind Power Prediction Models
Madsen, H., Pinson, P., Kariniotakis, G., Nielsen, H. A., & Nielsen, T. S. (2005) · Wind Engineering · doi:10.1260/030952405776234599 · Cited by 343
User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)
Frederick, D. K., DeCastro, J., & Litt, J. S. (2007) · NASA Technical Reports Server (NASA) · Cited by 259
Time series prediction competition: The CATS benchmark
Lendasse, A., Erkki Oja, A., Simula, O., & Verleysen, M. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.02.013 · Cited by 96
Online Model Parameter Estimation of Jet Engine Degradation for Autonomous Propulsion Control
Chatterjee, S., & Litt, J. S. (2003) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2003-5425 · Cited by 46
Kobayashi, T., & Simon, D. L. (2004) · doi:10.1115/gt2004-53640 · Cited by 43
Self-citationApplication of Autoassociative Neural Network on Gas-Path Sensor Data Validation
Lu, P.-J., & Hsu, T.-C. (2002) · Journal of Propulsion and Power · doi:10.2514/2.6013 · Cited by 38
Probabilistic Matching of Turbofan Engine Performance Models to Test Data
Roth, B. A., Doel, D. L., & Cissell, J. J. (2005) · doi:10.1115/gt2005-68201 · Cited by 34
Research works printed but not linked: 2
- 0, E-Handbook of Statistical Methods
- 0, NN5 Forecasting Compotition for Artificial Neural Networks & Computational Intelligence
Cited by
Items 201–300 of 1,001
Model-Based Diagnosis and RUL Estimation of Induction Machines Under Interturn Fault
Nguyen, V., Seshadrinath, J., Wang, D., Nadarajan, S., & Vaiyapuri, V. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2669195 · Cited by 75
Entropy-based sensor selection for condition monitoring and prognostics of aircraft engine
Liu, L., Wang, S., Liu, D., Zhang, Y., & Peng, Y. (2015) · Microelectronics Reliability · doi:10.1016/j.microrel.2015.06.076 · Cited by 75
Li, Z., Wu, J., & Yue, X. (2020) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2020.3026644 · Cited by 74
Recent trends and challenges in predictive maintenance of aircraft’s engine and hydraulic system
Khan, K., Sohaib, M., Rashid, A., Ali, S., Akbar, H., Basit, A., & Ahmad, T. (2021) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-021-03121-2 · Cited by 81
Barraza, J. E. F., Droguett, E. L., & Martins, M. R. (2021) · Sensors · doi:10.3390/s21175888 · Cited by 86
Chen, C., Shi, J., Lu, N., Zhu, Z. H., & Jiang, B. (2022) · Neurocomputing · doi:10.1016/j.neucom.2022.04.055 · Cited by 81
Multi-Resolution LSTM-Based Prediction Model for Remaining Useful Life of Aero-Engine
Xu, T., Han, G., Zhu, H., Taleb, T., & Peng, J. (2023) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2023.3319377 · Cited by 85
Health condition monitoring of machines based on long short-term memory convolutional autoencoder
Ye, Z., & Yu, J. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107379 · Cited by 83
Data-model interactive prognosis for multi-sensor monitored stochastic degrading devices
Li, T., Si, X., Pei, H., & Sun, L. Q. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108526 · Cited by 77
He, Y., Su, H., Zio, E., Peng, S., Fan, L., Yang, Z., Yang, Z., & Zhang, J. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109333 · Cited by 83
Rath, N., Mishra, R. K., & Kushari, A. (2022) · International Journal of Turbo and Jet Engines · doi:10.1515/tjj-2022-0020 · Cited by 73
Mahale, Y., Kolhar, S., & More, A. S. (2025) · Discover Applied Sciences · doi:10.1007/s42452-025-06681-3 · Cited by 117
Domain Adaptive Remaining Useful Life Prediction With Transformer
Li, X., Li, J., Zuo, L., Zhu, L., & Shen, H. T. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3200667 · Cited by 128
Chevtchenko, S. F., Rocha, É. D. S., Santos, M. C. M. D., Mota, R. L., Vieira, D. M., Andrade, E., & Araújo, D. (2023) · IEEE Access · doi:10.1109/access.2023.3333242 · Cited by 119
Xu, Z., Guo, Y., & Saleh, J. H. (2021) · IEEE Transactions on Reliability · doi:10.1109/tr.2021.3124944 · Cited by 82
Xiong, J., Zhou, J., Ma, Y., Zhang, F., & Lin, C. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109244 · Cited by 71
Zuo, T., Zhang, K., Zheng, Q. R., Li, X., Li, Z., Ding, G., & Zhao, M. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109337 · Cited by 77
Javed, K., Gouriveau, R., & Noureddine Zerhouni, A. (2013) · Neurocomputing · doi:10.1016/j.neucom.2013.07.021 · Cited by 71
Data-Driven Fault Detection in Aircraft Engines With Noisy Sensor Measurements
Sarkar, S., Jin, X., & Ray, A. (2011) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4002877 · Cited by 71
Wu, Z., Yu, S., Zhu, X., Ji, Y., & PECHT, M. G. (2019) · IEEE Access · doi:10.1109/access.2019.2943076 · Cited by 72
Wang, M., Li, Y., Zhang, Y., & Jia, L. (2021) · Aerospace Systems · doi:10.1007/s42401-020-00070-x · Cited by 69
Multiscale similarity ensemble framework for remaining useful life prediction
Xia, T., Shu, J., Xu, Y., Zheng, Y., & Wang, D. (2021) · Measurement · doi:10.1016/j.measurement.2021.110565 · Cited by 75
Al-Khazraji, H., Nasser, A. R., Hasan, A. M., Mhdawi, A. K. A., Al-Raweshidy, H. S., & Humaidi, A. J. (2022) · IEEE Access · doi:10.1109/access.2022.3188681 · Cited by 72
Jiang, F., Hou, X., & Xia, M. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102958 · Cited by 77
Multimodal Degradation Prognostics Based on Switching Kalman Filter Ensemble
Lim, P., Goh, C.-K., Tan, K. C., & Dutta, P. (2015) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2015.2504389 · Cited by 69
Dilated Convolution Neural Network for Remaining Useful Life Prediction
Xu, X. G., Wu, Q., Li, X., & Huang, B. (2019) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4045293 · Cited by 72
Cheng, Y., Wang, C., Wu, J., Zhu, H., & Lee, C. K. M. (2022) · Applied Soft Computing · doi:10.1016/j.asoc.2022.108507 · Cited by 74
Xu, D., Qiu, H., Gao, L., Yang, Z., & Wang, D. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108444 · Cited by 72
Remaining useful life estimation in heterogeneous fleets working under variable operating conditions
Al‐Dahidi, S., Maio, F. D., Baraldi, P., & Zio, E. (2016) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2016.07.019 · Cited by 84
Similarity-based Particle Filter for Remaining Useful Life prediction with enhanced performance
Cai, H., Feng, J., Li, W., Hsu, Y.-M., & Lee, J. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2020.106474 · Cited by 73
Liu, H., Liu, Z., Jia, W., Zhang, D., & Tan, J. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3084132 · Cited by 80
Wang, W., Lei, Y., Yan, T., Li, N., & Nandi, A. K. (2021) · Journal of Dynamics Monitoring and Diagnostics · doi:10.37965/jdmd.v2i2.43 · Cited by 68
Ren, L., Wang, H., & Huang, G. M. (2023) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2023.3257038 · Cited by 81
Making Use of Partial Knowledge About Hidden States in HMMs: An Approach Based on Belief Functions
Ramasso, E., & Denœux, T. (2013) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2013.2259496 · Cited by 69
Remaining Useful Life Estimation Using Functional Data Analysis
Wang, Q., Zheng, S., Farahat, A., Serita, S., & Gupta, C. (2019) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2019.8819420 · Cited by 81
Su, C., Li, L., & Wen, Z. (2020) · Quality and Reliability Engineering International · doi:10.1002/qre.2651 · Cited by 70
Evolutionary neural architecture search for remaining useful life prediction
Mo, H., Custode, L. L., & Iacca, G. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107474 · Cited by 75
A Light Gradient Boosting Machine for Remainning Useful Life Estimation of Aircraft Engines
Li, F., Zhang, L., Chen, B., Gao, D., Cheng, Y., Zhang, X., Yang, Y., Gao, K., Huang, Z., & Peng, J. (2018) · IEEE International Conference on Intelligent Transportation Systems (ITSC) · doi:10.1109/itsc.2018.8569801 · Cited by 86
Decision-Level Data Fusion in Quality Control and Predictive Maintenance
Wei, Y., Wu, D., & Terpenny, J. P. (2020) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2020.2964998 · Cited by 78
Skordilis, E., & Moghaddass, R. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106600 · Cited by 71
Xiang, S., Qin, Y., Luo, J. T., & Pu, H. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3121326 · Cited by 70
Sun, J., Yan, Z., Han, Y., Zhu, X., & Yang, C. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109404 · Cited by 76
Zhu, J., Jiang, Q., Shen, Y., Xu, F., & Zhu, Q. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106491 · Cited by 74
Wang, H., Zhang, Z., Li, X., Deng, X., & Jiang, W. R. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3322481 · Cited by 72
MHT: A multiscale hourglass-transformer for remaining useful life prediction of aircraft engine
Guo, J. Q., Lei, S., & Du, B. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107519 · Cited by 77
Sensory-Based Failure Threshold Estimation for Remaining Useful Life Prediction
Chehade, A., Bonk, S., & Liu, K. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2695119 · Cited by 65
A wiener-based remaining useful life prediction method with multiple degradation patterns
Li, Y., Huang, X., Gao, T., Zhao, C., & Li, S. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.102066 · Cited by 65
Local–Global Correlation Fusion-Based Graph Neural Network for Remaining Useful Life Prediction
Wang, Y., Wu, M., Jin, R., Li, X., Xie, L., & Chen, Z. (2023) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2023.3330487 · Cited by 70
Wang, W., Song, H., Si, S., Lu, W., & Cai, Z. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.110394 · Cited by 73
Ramasso, E., & Gouriveau, R. (2014) · IEEE Transactions on Reliability · doi:10.1109/tr.2014.2315912 · Cited by 65
A time window neural network based framework for Remaining Useful Life estimation
Lim, P., Goh, C.-K., & Tan, K. C. (2016) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2016.7727410 · Cited by 65
Data-Driven Remaining Useful Life Prediction Considering Sensor Anomaly Detection and Data Recovery
Liu, L., Guo, Q., Liu, D., & Peng, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2914236 · Cited by 67
Maschler, B., Vietz, H., Jazdi, N., & Weyrich, M. (2020) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa46521.2020.9211903 · Cited by 74
A Novel Cap-LSTM Model for Remaining Useful Life Prediction
Zhao, C., Huang, X., Li, Y., & Li, S. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3109623 · Cited by 64
Yan, J., He, Z., & He, S. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109141 · Cited by 69
Connexionist-Systems-Based Long Term Prediction Approaches for Prognostics
Gouriveau, R., & Noureddine Zerhouni, A. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2012.2220700 · Cited by 63
Deep-Learning Based Prognosis Approach for Remaining Useful Life Prediction of Turbofan Engine
Muneer, A., Taib, S. M., Fati, S. M., & Alhussian, H. (2021) · Symmetry · doi:10.3390/sym13101861 · Cited by 69
A Review of Sustainable Maintenance Strategies for Single Component and Multicomponent Equipment
Zhao, J., Gao, C., & Tang, T. (2022) · Sustainability · doi:10.3390/su14052992 · Cited by 62
Few-shot RUL estimation based on model-agnostic meta-learning
Mo, Y., Li, L., Huang, B., & Li, X. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01929-w · Cited by 73
Li, X., Jia, X., Wang, Y., Yang, S., Zhao, H., & Lee, J. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.2992331 · Cited by 63
Position Encoding Based Convolutional Neural Networks for Machine Remaining Useful Life Prediction
Jin, R., Wu, M., Wu, K., Gao, K., Chen, Z., & Li, X. (2022) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2022.105746 · Cited by 68
Zhang, L., Wang, B., Yuan, X., & Liang, P. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3185161 · Cited by 66
Nguyen, H. D., Long, N. H., Ha, K. N., Hoang, N. V., Hương, T. T., & Tran, K. P. (2023) · Computers in Industry · doi:10.1016/j.compind.2023.103888 · Cited by 68
A metric for assessing and optimizing data-driven prognostic algorithms for predictive maintenance
Kamariotis, A., Tatsis, K., Chatzi, E., Goebel, K., & Straub, D. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109723 · Cited by 79
Self-citationContrastive BiLSTM-enabled Health Representation Learning for Remaining Useful Life Prediction
Zhu, Q., Zhou, Z., Li, Y., & Yan, R. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.110210 · Cited by 69
Zhang, Q., Yang, P., & Liu, Q. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.07.004 · Cited by 69
Chen, S., Bekar, E. T., Bokrantz, J., & Skoogh, A. (2025) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2025.07.006 · Cited by 88
A spatiotemporal feature learning-based RUL estimation method for predictive maintenance
Wang, T., Li, X., Wang, W., Du, J., & Yang, X. (2023) · Measurement · doi:10.1016/j.measurement.2023.112824 · Cited by 64
Ragab, A., Ouali, M.-S., Yacout, S., & Osman, H. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0926-3 · Cited by 68
Laredo, D., Chen, Z., Schütze, O., & Sun, J. (2019) · Neural Networks · doi:10.1016/j.neunet.2019.04.016 · Cited by 60
Prognostics With Variational Autoencoder by Generative Adversarial Learning
Huang, Y., Tang, Y., & VanZwieten, J. H. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3053882 · Cited by 65
Miao, M., & Yu, J. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3084305 · Cited by 69
Semi-supervised clustering-based method for fault diagnosis and prognosis: A case study
Azar, K., Hajiakhondi-Meybodi, Z., & Naderkhani, F. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108405 · Cited by 61
Semi-supervised Learning with Deep Generative Models for Asset Failure PredictionPreprint
Yoon, A. S., Lee, T., Lim, Y., Jung, D., Kang, P., Kim, D.-W., Park, K., & Choi, Y. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1709.00845 · Cited by 86
Sensor Fusion via Statistical Hypothesis Testing for Prognosis and Degradation Analysis
Chehade, A., & Shi, Z. (2019) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2019.2897784 · Cited by 59
Data-Driven Method for Predicting Remaining Useful Life of Bearing Based on Bayesian Theory
Gao, T., Li, Y., Huang, X., & Wang, C. (2020) · Sensors · doi:10.3390/s21010182 · Cited by 62
Reinforcement learning for predictive maintenance: a systematic technical review
Siraskar, R., Kumar, S., Patil, S., Bongale, A. M., & Kotecha, K. V. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-023-10468-6 · Cited by 92
Zhou, M., Li, Y., Cao, Y., Ma, X., & Xu, Z. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.110685 · Cited by 64
Federated transfer learning for remaining useful life prediction in prognostics with data privacy
Zhang, W., Jiang, N., Yang, S., & Li, X. (2025) · Measurement Science and Technology · doi:10.1088/1361-6501/ade552 · Cited by 64
Ping, G., Chen, J., Pan, T., & Pan, J. H. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.04.013 · Cited by 63
A similarity based methodology for machine prognostics by using kernel two sample test
Cai, H., Jia, X., Feng, J., Li, W., Pahren, L., & Lee, J. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.03.007 · Cited by 59
Ong, K. S. H., Wang, W., Hieu, N. Q., Niyato, D. T., & Friedrichs, T. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3151862 · Cited by 66
Wang, H., Li, D., Li, D., Liu, C., Yang, X., & Zhu, G. (2023) · Applied Sciences · doi:10.3390/app13127186 · Cited by 69
Anomaly Detection in Asset Degradation Process Using Variational Autoencoder and Explanations
Jakubowski, J., Stanisz, P., Bobek, S., & Nalepa, G. J. (2021) · Sensors · doi:10.3390/s22010291 · Cited by 56
“The C-MAPSS data set [3] is one of the most widely used data sets for prognostics and health management research.”
MethodA data-driven degradation prognostic strategy for aero-engine under various operational conditions
Wang, C., Zhu, Z. H., Lu, N., Cheng, Y., & Jiang, B. (2021) · Neurocomputing · doi:10.1016/j.neucom.2021.07.080 · Cited by 59
A Hybrid Deep Learning Framework for Intelligent Predictive Maintenance of Cyber-physical Systems
Shcherbakov, M., & Cuong, S. V. (2022) · ACM Transactions on Cyber-Physical Systems · doi:10.1145/3486252 · Cited by 64
Wang, Y., Wu, M., Li, X., Xie, L., & Chen, Z. (2023) · IEEE Transactions on Artificial Intelligence · doi:10.1109/tai.2023.3241896 · Cited by 68
A concise self-adapting deep learning network for machine remaining useful life prediction
Xiang, S., Qin, Y., Luo, J. T., Wu, F., & Gryllias, K. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110187 · Cited by 59
A Bayesian adversarial probsparse Transformer model for long-term remaining useful life prediction
Cheng, Y., Qv, J., Feng, K., & Han, T. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.110188 · Cited by 66
A Novel Deep Learning-Based Encoder-Decoder Model for Remaining Useful Life Prediction
Liu, H., Liu, Z., Jia, W., & Lin, X. (2019) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2019.8852129 · Cited by 63
Robust Incipient Fault Detection of Complex Systems Using Data Fusion
Wei, Y., Wu, D., & Terpenny, J. P. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3003359 · Cited by 60
Adaptive Spatio-Temporal Graph Information Fusion for Remaining Useful Life Prediction
Zhang, Y., Li, Y., Wang, Y., Yang, Y., & Wei, X. H. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3136622 · Cited by 56
Xiang, S., Qin, Y., Liu, F., & Gryllias, K. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108531 · Cited by 60
Sharma, D. K., Brahmachari, S., Singhal, K., & Gupta, D. K. (2022) · Computers & Industrial Engineering · doi:10.1016/j.cie.2022.108213 · Cited by 71
Uncertainty-Aware Prognosis via Deep Gaussian Process
Biggio, L., Wieland, A., Chao, M. A., Kastanis, I., & Fink, O. (2021) · IEEE Access · doi:10.1109/access.2021.3110049 · Cited by 64
A Synthetic Feature Processing Method for Remaining Useful Life Prediction of Rolling Bearings
Mi, J., Liu, L., Zhuang, Y., Bai, L., & Li, Y. (2022) · IEEE Transactions on Reliability · doi:10.1109/tr.2022.3192526 · Cited by 57
Deep Belief Network based state classification for structural health diagnosis
Tamilselvan, P., Wang, Y., & Wang, P. (2012) · 2012 IEEE Aerospace Conference · doi:10.1109/aero.2012.6187366 · Cited by 48
Verstraete, D., Droguett, E. L., & Modarres, M. (2019) · Sensors · doi:10.3390/s20010176 · Cited by 60
Jiao, R., Peng, K., Dong, J., & Zhang, C. J. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107028 · Cited by 54
High Energy and Short Pulse Lasers
Viskup, R. (2016) · InTech eBooks · doi:10.5772/61628 · Cited by 61
Metadata
- Authors
- Saxena, A., Goebel, K., Simon, D., & Eklund, N.
- Affiliations
- Ames Research Center (US)
- Glenn Research Center (US)
- GE Global Research (United States) (US)
- Venue
- 2008 International Conference on Prognostics and Health Management
- Publisher
- IEEE
- Published
- 2008-10
- Pages
- 1-9
- OpenAlex
- W2120841219
- Cited by
- 1,954
- References
- 15
- Citations by year
- 2026: 219 · 2025: 290 · 2024: 270 · 2023: 260 · 2022: 206 · 2021: 204 · 2020: 154 · 2019: 106 · 2018: 57 · 2017: 46 · 2016: 41 · 2015: 21 · 2014: 18 · 2013: 17 · 2012: 16
- FWCI
- 16.45
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Prognostics and Health Management (PHM) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Automotive Engineering › Technical Engine Diagnostics and Monitoring
- Keywords
- damage propagation, aircraft gas turbine engines, prognostics and health management, health indicators, failure criteria, response surface, sensor data
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.