Damage propagation modeling for aircraft engine run-to-failure simulation
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the prognostics and health management (PHM) data competition at PHMpsila08.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“has become a pivotal resource for researchers and practitioners in the field of prognostics and health management, allowing for the realistic simulation and testing of PdM models”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“This dataset, developed through damage propagation modeling for aircraft engine run-to-failure simulation, has become a pivotal resource for researchers and practitioners in the field of prognostics and health management”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. (2008)
In the citing paper
“In addition, a custom S-score, given by Saxena et al. [[21](https://doi.org/10.3390/fi17060244#B21-futureinternet-17-00244)], is employed to evaluate prognostic performance by asymmetrically penalizing over-estimations and under-estimations.”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. [21]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The M3-Competition: results, conclusions and implications
Makridakis, S., & Hibon, M. (2000) · International Journal of Forecasting · doi:10.1016/s0169-2070(00)00057-1 · Cited by 1,695
The accuracy of extrapolation (time series) methods: Results of a forecasting competition
Makridakis, S., Andersen, A., Carbone, R., Fildes, R., Hibon, M., Lewandowski, R., Newton, J., Parzen, E., & Winkler, R. (1982) · Journal of Forecasting · doi:10.1002/for.3980010202 · Cited by 1,462
Metrics for evaluating performance of prognostic techniques
Saxena, A., Celaya, J., Balaban, E., Goebel, K., Saha, B., Saha, S., & Schwabacher, M. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711436 · Cited by 518
Self-citationStandardizing the Performance Evaluation of Short-Term Wind Power Prediction Models
Madsen, H., Pinson, P., Kariniotakis, G., Nielsen, H. A., & Nielsen, T. S. (2005) · Wind Engineering · doi:10.1260/030952405776234599 · Cited by 343
User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)
Frederick, D. K., DeCastro, J., & Litt, J. S. (2007) · NASA Technical Reports Server (NASA) · Cited by 259
Time series prediction competition: The CATS benchmark
Lendasse, A., Erkki Oja, A., Simula, O., & Verleysen, M. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.02.013 · Cited by 96
Online Model Parameter Estimation of Jet Engine Degradation for Autonomous Propulsion Control
Chatterjee, S., & Litt, J. S. (2003) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2003-5425 · Cited by 46
Kobayashi, T., & Simon, D. L. (2004) · doi:10.1115/gt2004-53640 · Cited by 43
Self-citationApplication of Autoassociative Neural Network on Gas-Path Sensor Data Validation
Lu, P.-J., & Hsu, T.-C. (2002) · Journal of Propulsion and Power · doi:10.2514/2.6013 · Cited by 38
Probabilistic Matching of Turbofan Engine Performance Models to Test Data
Roth, B. A., Doel, D. L., & Cissell, J. J. (2005) · doi:10.1115/gt2005-68201 · Cited by 34
Research works printed but not linked: 2
- 0, E-Handbook of Statistical Methods
- 0, NN5 Forecasting Compotition for Artificial Neural Networks & Computational Intelligence
Cited by
Items 601–700 of 1,001
An advanced performance-based method for soft and abrupt fault diagnosis of industrial gas turbines
Chen, Y.-Z., Zhang, W., Tsoutsanis, E., Zhao, J., Tam, I. C. K., & Gou, L. (2025) · Energy · doi:10.1016/j.energy.2025.135358 · Cited by 22
A fault mode identification methodology based on self-organizing map
Schwartz, S., Montero-Jiménez, J. J., Salaün, M., & Vingerhoeds, R. A. (2020) · Neural Computing and Applications · doi:10.1007/s00521-019-04692-x · Cited by 28
Deep LSTM Enhancement for RUL Prediction Using Gaussian Mixture Models
Sayah, M., Guebli, D., Zerhouni, N., & Masry, Z. A. (2021) · Automatic Control and Computer Sciences · doi:10.3103/s0146411621010089 · Cited by 24
Integrated framework for estimating remaining useful lifetime through a deep neural network
Son, S., & Oh, K. (2022) · Applied Soft Computing · doi:10.1016/j.asoc.2022.108879 · Cited by 24
Zhang, Z., Liu, T., Zhang, D., & Xie, Y. (2021) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4049768 · Cited by 24
A CM&CP framework with a GIACC method and an ensemble model for remaining useful life prediction
Li, Y., Han, T., Xia, T., Chen, Z., & Pan, E. (2022) · Computers in Industry · doi:10.1016/j.compind.2022.103794 · Cited by 25
Peng, Z., Huang, X., Tang, D., & Quan, Q. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3244221 · Cited by 22
Three‐stage feature selection approach for deep learning‐based RUL prediction methods
Wang, Y., & Zhao, Y. (2023) · Quality and Reliability Engineering International · doi:10.1002/qre.3288 · Cited by 23
Remaining Useful Life Prediction for Turbofan Engine Using SAE-TCN Model
Liu, X., Xiong, L., Zhang, Y., & Luo, C. (2023) · Aerospace · doi:10.3390/aerospace10080715 · Cited by 27
A Bidirectional Long Short-Term Memory Autoencoder Transformer for Remaining Useful Life Estimation
Fan, Z., Li, W., & Chang, K. (2023) · Mathematics · doi:10.3390/math11244972 · Cited by 34
Platform health management for aircraft maintenance – a review
Kwakye, A. D., Jennions, I. K., & Ezhilarasu, C. M. (2024) · Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering · doi:10.1177/09544100231219736 · Cited by 43
Zha, W., & Ye, Y. (2024) · Franklin Open · doi:10.1016/j.fraope.2024.100083 · Cited by 22
Lei, Z., Su, Y., Feng, K., & Wen, G. (2024) · Control Engineering Practice · doi:10.1016/j.conengprac.2024.106080 · Cited by 22
Recurrent Neural Networks for real-time distributed collaborative prognostics
Palau, A. S., Bakliwal, K., Dhada, M. H., Pearce, T., & Parlikad, A. K. (2018) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2018.8448622 · Cited by 22
Xiao, L., Duan, F., Tang, J., & Abbott, D. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3064810 · Cited by 25
Feng, D., Xiao, M., Liu, Y., Song, H., Zhao, Y., & Zhang, L. (2016) · Advances in Mechanical Engineering · doi:10.1177/1687814016650169 · Cited by 22
Soualhi, M., Nguyen, K. T. P., & Medjaher, K. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.108186 · Cited by 23
Zhang, T., Jiang, L., Huang, R., & Zhang, X. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3551011 · Cited by 21
Deployment of Prognostics to Optimize Aircraft Maintenance – A Literature Review
Sprong, J. P., Jiang, X., & Polinder, H. (2020) · Journal of International Business Research and Marketing · doi:10.18775/jibrm.1849-8558.2015.54.3004 · Cited by 31
Optimization of Design Parameters in LSTM Model for Predictive Maintenance
Kim, D., & Choi, J.-Y. (2021) · Applied Sciences · doi:10.3390/app11146450 · Cited by 26
Amin, U., & Kumar, K. D. (2021) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm51084.2021.9486500 · Cited by 21
Eciton: Very Low-Power LSTM Neural Network Accelerator for Predictive Maintenance at the Edge
Chen, J. Y., Hong, S., He, W., Moon, J., & Jun, S.-W. (2021) · International Conference on Field Programmable Logic and Applications (FPL) · doi:10.1109/fpl53798.2021.00009 · Cited by 28
Multi-objective Optimization of Extreme Learning Machine for Remaining Useful Life Prediction
Mo, H., & Iacca, G. (2022) · Lecture notes in computer science · doi:10.1007/978-3-031-02462-7_13 · Cited by 26
A deep learning based health index construction method with contrastive learning
Wang, H., Li, X., Zhang, Z., Deng, X., & Jiang, W. R. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109799 · Cited by 23
Lyu, Y., Wen, Z., & Chen, A. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02264-4 · Cited by 21
Supply Chain Resilience as Endotherm Resilience: Theorizing Through Metaphorical Transfer
Kwaramba, C. S., Goldstein, S. M., Lowry, P. B., Nottingham, Q. J., & Cooper, E. F. (2024) · Production and Operations Management · doi:10.1177/10591478241234170 · Cited by 21
AutoML for Predictive Maintenance: One Tool to RUL Them All
Tornede, T., Tornede, A., Wever, M., Mohr, F., & Hüllermeier, E. (2020) · IoT Streams/ITEM@PKDD/ECML · doi:10.1007/978-3-030-66770-2_8 · Cited by 19
Zhiyong, G., Jiwu, L., & Rongxi, W. (2021) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein.2021.1.16 · Cited by 21
Li, Z., Luo, S., Liu, H., Tang, C., & Miao, J. (2025) · Sensors · doi:10.3390/s25020432 · Cited by 27
Wang, W., Wang, Z., Cai, Z., Hu, C., & Si, S. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.111177 · Cited by 37
Remaining Useful Life Prediction of Gas Turbine Engine using Autoregressive Model
Ahsan, S., & Lemma, . A. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201713104014 · Cited by 20
Estimating Remaining Useful Life of Turbofan Engine Using Data-Level Fusion and Feature-Level Fusion
Ghorbani, S., & Salahshoor, K. (2020) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-020-00832-x · Cited by 22
Wang, Y., Zhao, Y., & Addepalli, S. (2021) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-021-00588-x · Cited by 24
Chang, L., Lin, Y., & Zio, E. (2021) · Quality and Reliability Engineering International · doi:10.1002/qre.2997 · Cited by 21
Baptista, M. L., & Henriques, E. M. P. (2022) · Applied Soft Computing · doi:10.1016/j.asoc.2022.109785 · Cited by 25
Multi-Scale Remaining Useful Life Prediction Using Long Short-Term Memory
Wang, Y., & Zhao, Y. (2022) · Sustainability · doi:10.3390/su142315667 · Cited by 27
Prediction of remaining useful life using the CNN-GRU network: A study on maintenance management
Azyus, A. F., Wijaya, S. K., & Naved, M. I. (2023) · Software Impacts · doi:10.1016/j.simpa.2023.100535 · Cited by 30
Global and local information integrated network for remaining useful life prediction
Chen, Z., Jin, X., Kong, Z., Wang, F., & Xu, Z. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106956 · Cited by 21
Wu, B., Zeng, J., Shi, H., Zhang, X., & Qin, Y. (2023) · Computers & Industrial Engineering · doi:10.1016/j.cie.2023.109736 · Cited by 20
Improving Predictive Maintenance in Industrial Environments via IIoT and Machine Learning
Alhuqayl, S. O., Alenazi, A. T., Alabduljabbar, H. A., & Haq, M. A. (2024) · International Journal of Advanced Computer Science and Applications · doi:10.14569/ijacsa.2024.0150464 · Cited by 28
Serir, L., Ramasso, E., & Noureddine Zerhouni, A. (2011) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2011.6024330 · Cited by 20
Neural networks trained with WiFi traces to predict airport passenger behavior
Orsini, F., Gastaldi, M., Mantecchini, L., & Rossi, R. (2019) · International Conference on Models and Technologies for Intelligent Transportation Systems (MT-ITS) · doi:10.1109/mtits.2019.8883365 · Cited by 22
Jiang, W., Zhang, N., Xue, X., Xu, Y., Zhou, J.-Z., & Wang, X. (2020) · IEEE Access · doi:10.1109/access.2020.2974190 · Cited by 22
A Novel Product Remaining Useful Life Prediction Approach Considering Fault Effects
Lin, J., Lin, Z. H., Liao, G., & Yin, H. (2021) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2021.1004168 · Cited by 22
A Robust Functional-Data-Analysis Method for Data Recovery in Multichannel Sensor Systems
Sun, J., Liao, H., & Upadhyaya, B. R. (2014) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2013.2285876 · Cited by 22
Nonparametric and Semi-Parametric Sensor Recovery in Multichannel Condition Monitoring Systems
Liao, H., & Sun, J. (2011) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2011.2159265 · Cited by 24
Aero-engine remaining useful life prediction based on a long-term channel self-attention network
Liu, X., Chen, Y., Ni, H., & Zhang, D. (2023) · Signal Image and Video Processing · doi:10.1007/s11760-023-02800-y · Cited by 19
Peng, P., Li, Y., & Guo, Z. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.109799 · Cited by 21
Ndao, M. L., Youness, G., Niang, N., & Saporta, G. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.110144 · Cited by 29
Niu, T. Y., Xu, Z., Luo, H., & Zhou, Z. (2025) · Scientific Reports · doi:10.1038/s41598-025-88703-z · Cited by 25
Zhu, J., Li, B., Zhu, Z., & Zhao, X. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.111289 · Cited by 21
Remaining Useful Life Estimation of Turbofan Engine Using LSTM Neural Networks
Lan, G., Li, Q. '., & Cheng, N. (2018) · IEEE CSAA Guidance, Navigation and Control Conference (CGNCC) · doi:10.1109/gncc42960.2018.9019107 · Cited by 25
Sharanya, S., Venkataraman, R., & Murali, G. (2022) · International Journal of Turbo and Jet Engines · doi:10.1515/tjj-2022-0007 · Cited by 23
Che, C., Wang, H., Ni, X., & Xiong, M. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac7f80 · Cited by 20
Optimizing the Parameters of Long Short-Term Memory Networks Using the Bees Algorithm
Alamri, N. M. H., Packianather, M., & Bigot, S. (2023) · Applied Sciences · doi:10.3390/app13042536 · Cited by 19
Uncertainty-aware remaining useful life prediction for predictive maintenance using deep learning
Xuan, Q. L., Adhisantoso, Y. G., Munderloh, M., & Östermann, J. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.06.021 · Cited by 23
Unlocking maintenance insights in industrial text through semantic search
Naqvi, S. M. R., Ghufran, M., Varnier, C., Nicod, J., Javed, K., & Zerhouni, N. (2024) · Computers in Industry · doi:10.1016/j.compind.2024.104083 · Cited by 48
Lin, W., Chen, X., Lu, H., Jiang, Y., Fan, L., & Chai, Y. (2024) · Journal of Process Control · doi:10.1016/j.jprocont.2024.103264 · Cited by 19
Liang, T., Wang, F., Wang, S., Li, K., Ma, X., & Mo, X. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102719 · Cited by 24
Zheng, Q. S., Teng, P., Zhang, K., Ding, G., Lai, X., Li, Z., & Yuan, Z. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2024.112915 · Cited by 22
Xinxin, X., Yang, H. Y., Cheng, N., & Li, Q. (2015) · International Symposium on Computational Intelligence and Design · doi:10.1109/iscid.2015.206 · Cited by 19
Trinh, H.-C., & Kwon, Y. (2020) · Applied Sciences · doi:10.3390/app10010368 · Cited by 19
Wu, Q., & Zhang, C. (2020) · IEEE Access · doi:10.1109/access.2020.2970444 · Cited by 21
Generative Adversarial Networks for Failure Prediction
Zheng, S., Farahat, A., & Gupta, C. (2020) · Lecture notes in computer science · doi:10.1007/978-3-030-46133-1_37 · Cited by 22
Multi-sensor prognostics modeling for applications with highly incomplete signals
Fang, X., Yan, H., Gebraeel, N., & Paynabar, K. (2020) · IISE Transactions · doi:10.1080/24725854.2020.1789779 · Cited by 23
Yan, T., Wang, D., Kong, J., Xia, T., Peng, Z., & Xi, L. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3075779 · Cited by 23
Health diagnostics using multi-attribute classification fusion
Wang, P., Tamilselvan, P., & Hu, C. K. (2014) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2014.03.006 · Cited by 21
Privacy-Preserving Adaptive Remaining Useful Life Prediction via Source-Free Domain Adaption
Wu, K., Li, J., Meng, L., Li, F., & Shen, H. T. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3309381 · Cited by 20
Ma, M., Wang, Z., & Zhong, Z. (2024) · Aerospace · doi:10.3390/aerospace11040289 · Cited by 18
Self-supervised learning for remaining useful life prediction using simple triplet networks
Liu, C., Xiao, B., & Hsu, S.-S. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.103038 · Cited by 26
Yang, J., Zhou, J., Chai, Y., Chen, D., & Qin, Y. (2025) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2025.110823 · Cited by 24
Interpretable prognostics with concept bottleneck models
Forest, F., Rombach, K., & Fink, O. (2025) · Information Fusion · doi:10.1016/j.inffus.2025.103427 · Cited by 22
Özcan, H. (2025) · Scientific Reports · doi:10.1038/s41598-025-23473-2 · Cited by 34
Time series chain graph for modeling reliability covariates in degradation process
Xu, H., FARD, N. S., & Fang, Y. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107207 · Cited by 18
Automated Machine Learning for Remaining Useful Life Estimation of Aircraft Engines
Kefalas, M., Baratchi, M., Apostolidis, A., van den Herik, D., & Bäck, T. (2021) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm51084.2021.9486549 · Cited by 23
Remaining Useful Life Prediction for Aero-Engine Based on LSTM and CNN
Ruan, D., Wu, Y., & Yan, J. (2021) · Chinese Control and Decision Conference (CCDC) · doi:10.1109/ccdc52312.2021.9601773 · Cited by 21
Xu, T., Han, G., Gou, L., Martínez-García, M., Shao, D., Luo, B., & Yin, Z. (2022) · IEEE Transactions on Network Science and Engineering · doi:10.1109/tnse.2022.3163473 · Cited by 20
Deep Learning with Spatial Attention-Based CONV-LSTM for SOC Estimation of Lithium-Ion Batteries
Tian, H., & Chen, J. (2022) · Processes · doi:10.3390/pr10112185 · Cited by 23
LSTM-Based Multi-Task Method for Remaining Useful Life Prediction under Corrupted Sensor Data
Zhang, K., & Liu, R. (2023) · Machines · doi:10.3390/machines11030341 · Cited by 25
Ding, H., Hao, K., Chen, L., & Shi, X. (2024) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2024.05.011 · Cited by 18
Karatzinis, G. D., Boutalis, Y. S., & Vaerenbergh, S. V. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.111551 · Cited by 21
Qiao, X., Jauw, V. L., Seong, L. C., & Banda, T. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-14000-0 · Cited by 21
Explicit Context Integrated Recurrent Neural Network for applications in smart environments
Baruah, R. D., & Muñoz-Organero, M. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2024.124752 · Cited by 34
Wang, Y., Xu, Y., Yang, J., Wu, M., Li, X., Xie, L., & Chen, Z. (2024) · CRC Press eBooks · doi:10.1109/tpami.2024.3444904 · Cited by 23
Cui, W., Wang, R., Sun, T., & Liu, Z. (2024) · Energy · doi:10.1016/j.energy.2024.132924 · Cited by 18
A composite discretization scheme for symbolic identification of complex systems
Sarkar, S., & Srivastav, A. (2016) · Signal Processing · doi:10.1016/j.sigpro.2016.01.018 · Cited by 18
Ragab, A., Yacout, S., Ouali, M.-S., & Osman, H. (2017) · Quality and Reliability Engineering International · doi:10.1002/qre.2142 · Cited by 22
Towards online data-driven prognostics system
Elattar, H. M., Elminir, H. K., & Riad, A. M. (2018) · Complex & Intelligent Systems · doi:10.1007/s40747-018-0082-z · Cited by 18
Deep & Attention: A Self-Attention based Neural Network for Remaining Useful Lifetime Predictions
Liu, Y., & Wang, X. (2021) · International Conference on Mechatronics and Robotics Engineering (ICMRE) · doi:10.1109/icmre51691.2021.9384841 · Cited by 21
Deep forest based multivariate classification for diagnostic health monitoring
Wang, C., Lu, N., Cheng, Y., & Jiang, B. (2018) · Chinese Control and Decision Conference (CCDC) · doi:10.1109/ccdc.2018.8408224 · Cited by 20
Khan, F., Eker, O. F., Khan, A. A., & Orfali, W. (2018) · Data · doi:10.3390/data3040049 · Cited by 23
Wang, L., Zhu, Z., & Zhao, X. (2025) · International Journal of Reliability Quality and Safety Engineering · doi:10.1142/s0218539325500111 · Cited by 18
Zhao, C., Huang, X., Liu, H., Gao, T., & Shi, J. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac84f6 · Cited by 17
Remaining Useful Life Prediction Based on Multi-Representation Domain Adaptation
Lyu, Y., Zhang, Q., Wen, Z., & Chen, A. (2022) · Mathematics · doi:10.3390/math10244647 · Cited by 18
Zeng, L., Zheng, J., Yao, L., & Ge, Z. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3221142 · Cited by 17
A Semisupervised Deep Hybrid Multitask Model for RUL Prediction
Lin, Y., Guan, L.-X., Chang, L., & Zio, E. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3291801 · Cited by 18
Fuzzy Cognitive Networks in Diverse Applications Using Hybrid Representative Structures
Karatzinis, G. D., Apostolikas, N., Boutalis, Y. S., & Papakostas, G. A. (2023) · International Journal of Fuzzy Systems · doi:10.1007/s40815-023-01564-4 · Cited by 19
Athar, A., Mozumder, M. A. I., Abdullah, Ali, S., & Kim, H. (2024) · PeerJ Computer Science · doi:10.7717/peerj-cs.2389 · Cited by 17
Zhao-feng, L., Zheng, X., Xue, A., & Ge, M. (2024) · ACS Omega · doi:10.1021/acsomega.4c03873 · Cited by 21
Role of Prognostics in Support of Integrated Risk-based Engineering in Nuclear Power Plant Safety
Varde, P. V., & PECHT, M. G. (2020) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2012.v3i1.1362 · Cited by 18
Metadata
- Authors
- Saxena, A., Goebel, K., Simon, D., & Eklund, N.
- Affiliations
- Ames Research Center (US)
- Glenn Research Center (US)
- GE Global Research (United States) (US)
- Venue
- 2008 International Conference on Prognostics and Health Management
- Publisher
- IEEE
- Published
- 2008-10
- Pages
- 1-9
- OpenAlex
- W2120841219
- Cited by
- 1,954
- References
- 15
- Citations by year
- 2026: 219 · 2025: 290 · 2024: 270 · 2023: 260 · 2022: 206 · 2021: 204 · 2020: 154 · 2019: 106 · 2018: 57 · 2017: 46 · 2016: 41 · 2015: 21 · 2014: 18 · 2013: 17 · 2012: 16
- FWCI
- 16.45
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Prognostics and Health Management (PHM) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Automotive Engineering › Technical Engine Diagnostics and Monitoring
- Keywords
- damage propagation, aircraft gas turbine engines, prognostics and health management, health indicators, failure criteria, response surface, sensor data
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.