Damage propagation modeling for aircraft engine run-to-failure simulation
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
This paper describes how damage propagation can be modeled within the modules of aircraft gas turbine engines. To that end, response surfaces of all sensors are generated via a thermo-dynamical simulation model for the engine as a function of variations of flow and efficiency of the modules of interest. An exponential rate of change for flow and efficiency loss was imposed for each data set, starting at a randomly chosen initial deterioration set point. The rate of change of the flow and efficiency denotes an otherwise unspecified fault with increasingly worsening effect. The rates of change of the faults were constrained to an upper threshold but were otherwise chosen randomly. Damage propagation was allowed to continue until a failure criterion was reached. A health index was defined as the minimum of several superimposed operational margins at any given time instant and the failure criterion is reached when health index reaches zero. Output of the model was the time series (cycles) of sensed measurements typically available from aircraft gas turbine engines. The data generated were used as challenge data for the prognostics and health management (PHM) data competition at PHMpsila08.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“has become a pivotal resource for researchers and practitioners in the field of prognostics and health management, allowing for the realistic simulation and testing of PdM models”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“This dataset, developed through damage propagation modeling for aircraft engine run-to-failure simulation, has become a pivotal resource for researchers and practitioners in the field of prognostics and health management”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as [21]
In the citing paper
“In addressing this issue, Saxena et al. (2008) have contributed to the field by introducing the CMAPSS dataset”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. (2008)
In the citing paper
“In addition, a custom S-score, given by Saxena et al. [[21](https://doi.org/10.3390/fi17060244#B21-futureinternet-17-00244)], is employed to evaluate prognostic performance by asymmetrically penalizing over-estimations and under-estimations.”
From A Robust Conformal Framework for IoT-Based Predictive Maintenance (2025) · cites this paper as Saxena et al. [21]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The M3-Competition: results, conclusions and implications
Makridakis, S., & Hibon, M. (2000) · International Journal of Forecasting · doi:10.1016/s0169-2070(00)00057-1 · Cited by 1,695
The accuracy of extrapolation (time series) methods: Results of a forecasting competition
Makridakis, S., Andersen, A., Carbone, R., Fildes, R., Hibon, M., Lewandowski, R., Newton, J., Parzen, E., & Winkler, R. (1982) · Journal of Forecasting · doi:10.1002/for.3980010202 · Cited by 1,462
Metrics for evaluating performance of prognostic techniques
Saxena, A., Celaya, J., Balaban, E., Goebel, K., Saha, B., Saha, S., & Schwabacher, M. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711436 · Cited by 518
Self-citationStandardizing the Performance Evaluation of Short-Term Wind Power Prediction Models
Madsen, H., Pinson, P., Kariniotakis, G., Nielsen, H. A., & Nielsen, T. S. (2005) · Wind Engineering · doi:10.1260/030952405776234599 · Cited by 343
User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)
Frederick, D. K., DeCastro, J., & Litt, J. S. (2007) · NASA Technical Reports Server (NASA) · Cited by 259
Time series prediction competition: The CATS benchmark
Lendasse, A., Erkki Oja, A., Simula, O., & Verleysen, M. (2007) · Neurocomputing · doi:10.1016/j.neucom.2007.02.013 · Cited by 96
Online Model Parameter Estimation of Jet Engine Degradation for Autonomous Propulsion Control
Chatterjee, S., & Litt, J. S. (2003) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2003-5425 · Cited by 46
Kobayashi, T., & Simon, D. L. (2004) · doi:10.1115/gt2004-53640 · Cited by 43
Self-citationApplication of Autoassociative Neural Network on Gas-Path Sensor Data Validation
Lu, P.-J., & Hsu, T.-C. (2002) · Journal of Propulsion and Power · doi:10.2514/2.6013 · Cited by 38
Probabilistic Matching of Turbofan Engine Performance Models to Test Data
Roth, B. A., Doel, D. L., & Cissell, J. J. (2005) · doi:10.1115/gt2005-68201 · Cited by 34
Research works printed but not linked: 2
- 0, E-Handbook of Statistical Methods
- 0, NN5 Forecasting Compotition for Artificial Neural Networks & Computational Intelligence
Cited by
Items 701–800 of 1,001
A new modeling and inference approach for the belief rule base with attribute reliability
You, Y., Sun, J., Jiang, J., & Lu, S. (2019) · Applied Intelligence · doi:10.1007/s10489-019-01586-2 · Cited by 17
A method for degradation prediction based on Hidden semi-Markov models with mixture of Kernels
Yang, T., Zheng, Z., & Qi, L. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103295 · Cited by 18
Su, X., Tao, L., Liu, H., Wang, L., & Suo, M. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107286 · Cited by 18
Data-driven prognostics method for turbofan engine degradation using hybrid deep neural network
Xue, B., Xu, Z., Huang, X., & Nie, P. (2021) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-021-1109-8 · Cited by 19
Remaining Useful Life Prediction Using Dual-Channel LSTM with Time Feature and Its Difference
Peng, C., Wu, J., Wang, Q., Gui, W., & Tang, Z. (2022) · Entropy · doi:10.3390/e24121818 · Cited by 23
Maurya, S., & Verma, N. K. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3253887 · Cited by 17
A Copula-based sampling method for data-driven prognostics and health management
Xi, Z., Jing, R., Wang, P., & Hu, C. K. (2013) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2013.6621450 · Cited by 17
Enhanced Trajectory Based Similarity Prediction with Uncertainty Quantification
Lam, J., Sankararaman, S., & Stewart, B. (2014) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2014.v6i1.2513 · Cited by 17
An Adversarial Learning Approach for Machine Prognostic Health Management
Huang, Y., Tang, Y., VanZwieten, J. H., Liu, J., & Xiao, X. (2019) · International Conference on High Performance Big Data and Intelligent Systems (HPBD&IS) · doi:10.1109/hpbdis.2019.8735480 · Cited by 21
Chen, Z., Tu, X., Hu, Y., & Li, F. (2019) · IEEE Access · doi:10.1109/access.2019.2929271 · Cited by 18
Autoencoder based Semi-Supervised Anomaly Detection in Turbofan Engines
Bataineh, A. A., Mairaj, A., & Kaur, D. (2020) · International Journal of Advanced Computer Science and Applications · doi:10.14569/ijacsa.2020.0111105 · Cited by 22
Xie, S., Cheng, W., Nie, Z., Xing, J., Chen, X., Huang, Q., Zhang, R., & Yang, Y. (2025) · Advanced Engineering Informatics · doi:10.1016/j.aei.2025.103515 · Cited by 16
A CNN-Based Structure for Performance Degradation Estimation of High-Speed Train Lateral Damper
Ren, J., Jin, W., & Wu, Y. (2020) · IEEE Access · doi:10.1109/access.2020.3027349 · Cited by 16
A Workflow for Synthetic Data Generation and Predictive Maintenance for Vibration Data
Selçuk, Ş. Y., Ünal, P., Albayrak, Ö., & Jomâa, M. (2021) · Information · doi:10.3390/info12100386 · Cited by 27
Esfahani, Z., Salahshoor, K., & Mazinan, A. H. (2022) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03546-3 · Cited by 17
Remaining Useful Life Prediction for Aero-Engine Based on Hybrid CNN-GRU Model
Qu, G., Qiu, T., Si, Y., Yuan, Q., Ma, Q., & Wang, C. (2022) · IEEE International Conference on Unmanned Systems (ICUS) · doi:10.1109/icus55513.2022.9987018 · Cited by 17
Lv, S., & Liu, S. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acda52 · Cited by 16
An integrated network architecture for data repair and degradation trend prediction
Yang, Q., Tang, B., Yang, S., & Shen, Y. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110610 · Cited by 16
Li, R., Jiang, Y., Xia, T., Wang, D., Chen, Z., Pan, E., & Xi, L. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3310479 · Cited by 16
Spherical-dynamic time warping – A new method for similarity-based remaining useful life prediction
Li, X., Xu, S., Yang, Y., Lin, T. R., Mba, D., & Li, C. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.121913 · Cited by 19
Robots for the Energy Transition: A Review
Taraglio, S., Chiesa, S., Vito, S. D., Paoloni, M., Piantadosi, G., Zanela, A., & Francia, G. D. (2024) · Processes · doi:10.3390/pr12091982 · Cited by 28
Cen, Z., Hu, S., Hou, Y., Sun, G., Chen, Z., & Ke, Y. (2024) · Measurement · doi:10.1016/j.measurement.2024.116411 · Cited by 16
Liu, X., Cui, S., Qiao, W., Liu, J., & Wu, G. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.130232 · Cited by 16
Klein, P., & Bergmann, R. (2018) · LWDA · Cited by 19
Attention Based Echo State Network
Liu, C., Yao, R., Zhang, L., & Liao, Y. J. (2019) · International Conference on Machine Learning and Computing (ICMLC) · doi:10.1145/3318299.3318325 · Cited by 17
Secure and communications‐efficient collaborative prognosis
Dhada, M. H., Jain, A. K., Herrera, M., Hernández, M. P., & Parlikad, A. K. (2020) · IET Collaborative Intelligent Manufacturing · doi:10.1049/iet-cim.2020.0035 · Cited by 16
Yang, X., Fang, Z., Li, X., Yang, Y., & Mba, D. (2020) · Grey Systems Theory and Application · doi:10.1108/gs-05-2020-0066 · Cited by 16
Coevolution of remaining useful lifetime estimation pipelines for automated predictive maintenance
Tornede, T., Tornede, A., Wever, M., & Hüllermeier, E. (2021) · Genetic and Evolutionary Computation Conference (GECCO) · doi:10.1145/3449639.3459395 · Cited by 18
A New Hybrid Model for RUL Prediction through Machine Learning
Esfahani, Z., Salahshoor, K., Farsi, B., & Eicker, U. (2021) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-021-01205-8 · Cited by 18
DeVol, N., Saldaña, C., & Fu, K. K. (2021) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2021.v13i1.3109 · Cited by 22
Jiang, W., Xu, Y., Chen, Z., Zhang, N., Xue, X., & Zhou, J. (2022) · Measurement · doi:10.1016/j.measurement.2022.111502 · Cited by 16
Suo, M., Cheng, Y., Zhuang, C., Ding, Y., Lü, C., & Tao, L. (2020) · Neural Computing and Applications · doi:10.1007/s00521-020-04946-z · Cited by 16
Deep learning models for predictive maintenance: a survey, comparison, challenges and prospectPreprint
Serradilla, O., Zugasti, E., & Zurutuza, U. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2010.03207 · Cited by 16
Jiang, M., Xing, T., Zio, E., & Zhu, X. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3479079 · Cited by 15
Du, Y., Fang, H., Zuo, H., & Zhao, X. (2025) · Expert Systems with Applications · doi:10.1016/j.eswa.2025.128370 · Cited by 15
Zhu, J., Ma, J., Wu, J., & Fan, L. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2025.113006 · Cited by 17
Li, S., Yang, Z., Chen, C., Yu, C., Tian, H., & Jin, T. (2021) · Applied Mathematical Modelling · doi:10.1016/j.apm.2021.06.032 · Cited by 15
Wang, M., Wang, H., Cui, L., Xiang, G., Han, X., Zhang, Q., & Chen, J. (2022) · Aerospace · doi:10.3390/aerospace9100609 · Cited by 15
Huang, L., Pan, X., Liu, Y., & Gong, L. (2023) · Sensors · doi:10.3390/s23167239 · Cited by 21
Reinforced Knowledge Distillation for Time Series Regression
Xu, Q. Y., Wu, K., Wu, M., Mao, K., Li, X., & Chen, Z. (2023) · IEEE Transactions on Artificial Intelligence · doi:10.1109/tai.2023.3341854 · Cited by 15
Optimal predictive selective maintenance for fleets of mission-oriented systems
O'Neil, R., Khatab, A., & Diallo, C. (2024) · International Journal of Production Research · doi:10.1080/00207543.2024.2349257 · Cited by 15
Chen, B., Li, P., Wan, G., Chen, F., & Liu, Q. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3404017 · Cited by 15
Hu, G., Fu, S., Zhong, S., Lin, L., Liu, Y., Zhang, S., & Guo, F. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad5c8c · Cited by 17
A heterogeneous transfer learning method for fault prediction of railway track circuit
Na, L., Cai, B., Zhang, C., Liu, J., & Li, Z. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.109740 · Cited by 16
Liu, F., Liu, S., Chai, Y., & Zhu, Y. (2025) · Scientific Reports · doi:10.1038/s41598-025-91815-1 · Cited by 23
Prediction Using Cuckoo Search Optimized Echo State Network
Bala, A., Ismail, I. B., Ibrahim, R., Sait, S. M., & Salami, H. O. (2019) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-019-04008-0 · Cited by 16
Data-Driven Prognostics for Run-To-Failure Data Employing Machine Learning Models
Saranya, E., & Sivakumar, P. B. (2020) · International Conference on Inventive Computation Technologies (ICICT) · doi:10.1109/icict48043.2020.9112411 · Cited by 17
Rengasamy, D., Rothwell, B. C., & Figueredo, G. P. (2020) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn48605.2020.9207051 · Cited by 17
Yu, K. M., Wang, D., & Li, H. (2021) · International Conference on Information, Cybernetics, and Computational Social Systems (ICCSS) · doi:10.1109/iccss53909.2021.9722026 · Cited by 15
Fallahdizcheh, A., & Wang, C. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108448 · Cited by 16
Shi, J., Li, Y., Wang, G., & Li, X. (2016) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · doi:10.17531/ein.2016.4.18 · Cited by 15
Chen, G., Chen, J., Zi, Y., & Miao, H. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.06.030 · Cited by 15
Conception and implementation of a data-driven prognostics algorithm for safety–critical systems
Elattar, H. M., Elminir, H. K., & Riad, A. M. (2018) · Soft Computing · doi:10.1007/s00500-017-2995-7 · Cited by 15
Niu, B., Xiao, Q., Xiao, Q., Liu, Y., Peng, T., & Yang, Z. (2025) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102938 · Cited by 15
SiMBA-Augmented Physics-Informed Neural Networks for Industrial Remaining Useful Life Prediction
Li, M., Qin, J., Fan, H., & Ke, T. (2025) · Machines · doi:10.3390/machines13060452 · Cited by 15
Xiao, G., Jin, C., & Bai, J. (2025) · Applied Sciences · doi:10.3390/app15179813 · Cited by 14
Qian, C., Li, Y., Zhu, Y., Yang, D., Ren, Y., Xia, Q., & Wang, Z. (2025) · Computers & Industrial Engineering · doi:10.1016/j.cie.2025.111567 · Cited by 14
Health assessment and prognostics based on higher‐order hidden semi‐Markov models
Liao, Y., Xiang, Y., & Wang, M. (2020) · Naval Research Logistics (NRL) · doi:10.1002/nav.21947 · Cited by 14
de Beaulieu, M. H., Jha, M., Garnier, H., & Cerbah, F. (2022) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2022.07.212 · Cited by 22
Li, S., Zhang, C., & Zhang, X. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3383052 · Cited by 14
Jia, Z., Ren, L., & Tang, Y. S. (2025) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2024.3523572 · Cited by 24
Feng, J., & Kan, J. (2025) · IEEE Access · doi:10.1109/access.2025.3547863 · Cited by 19
AIGC for Industrial Time Series: From Deep-Generative Models to Large-Generative Models
Ren, L., Wang, H., Li, J., Tang, Y. S., & Yang, C. (2025) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2025.3598252 · Cited by 36
A Novel Time Series-Histogram of Features (TS-HoF) Method for Prognostic Applications
Lim, P., Goh, C.-K., & Tan, K. C. (2018) · IEEE Transactions on Emerging Topics in Computational Intelligence · doi:10.1109/tetci.2018.2822836 · Cited by 14
Remaining Useful Life Prediction Using Time-Frequency Feature and Multiple Recurrent Neural Networks
Hong, J., Wang, Q., Qiu, X., & Chan, H. L. (2019) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2019.8869017 · Cited by 14
Zhang, L., & Zhang, J. (2020) · IEEE Access · doi:10.1109/access.2020.3047928 · Cited by 15
Deep learning for machine health prognostics using Kernel-based feature transformation
Pillai, S., & Vadakkepat, P. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-021-01747-6 · Cited by 17
Metrics, Models, and Scenarios for Evaluating PHM Effects on Logistics Support
Luna, J. J. (2009) · Annual Conference of the PHM Society · Cited by 14
Evolutionary Optimization of Spiking Neural P Systems for Remaining Useful Life Prediction
Custode, L. L., Mo, H., Ferigo, A., & Iacca, G. (2022) · Algorithms · doi:10.3390/a15030098 · Cited by 14
Yang, J., Jiang, Z., Zhu, S., & Zhang, H. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.05.014 · Cited by 15
Measurement and optimization of rule consistency in a belief rule base system
You, Y., Sun, J., Zhao, R., Tan, Y., & Jiang, J. (2023) · Information Sciences · doi:10.1016/j.ins.2023.119133 · Cited by 14
INCORPORATING PRIOR BELIEF IN THE GENERAL PATH MODEL: A COMPARISON OF INFORMATION SOURCES
Coble, J. B., & Hines, J. W. (2014) · Nuclear Engineering and Technology · doi:10.5516/net.04.2014.722 · Cited by 14
A Remaining Useful Life Prediction Model Based on Hybrid Long-Short Sequences for Engines
Wang, S., Zhang, X., Gao, D., Chen, B., Cheng, Y., Yang, Y., Yu, W., Huang, Z., & Peng, J. (2018) · IEEE International Conference on Intelligent Transportation Systems (ITSC) · doi:10.1109/itsc.2018.8569668 · Cited by 19
Towards Distribution Clustering-Based Deep LSTM Models for RUL Prediction
Sayah, M., Guebli, D., Zerhouni, N., & Masry, Z. A. (2020) · Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-besancon49106.2020.00049 · Cited by 17
Noisy parallel hybrid model of NBGRU and NCNN architectures for remaining useful life estimation
Al-Dulaimi, A., Asif, A. A., & Mohammadi, A. (2020) · Quality Engineering · doi:10.1080/08982112.2020.1754427 · Cited by 15
Cornelius, J., Brockner, B., Hong, S. H., Wang, Y., Pant, K., & Ball, J. E. (2020) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm49022.2020.9187063 · Cited by 19
Mazzuto, G., Antomarioni, S., Ciarapica, F. E., & Bevilacqua, M. (2021) · Mathematical Problems in Engineering · doi:10.1155/2021/8832011 · Cited by 14
Huang, D., Bai, R. G., Zhao, S., Wen, P., He, J., Wang, S., & Chen, S. (2021) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm51084.2021.9486527 · Cited by 19
Identifying Benchmarks for Failure Prediction in Industry 4.0
Diallo, M. S., Mokeddem, S., Braud, A., Frey, G., & Lachiche, N. (2021) · Informatics · doi:10.3390/informatics8040068 · Cited by 22
Agentic AI for Intent-Based Industrial Automation
Romero, M. L., & Suyama, R. (2025) · IEEE International Conference on Industry Applications · doi:10.1109/induscon66435.2025.11241317 · Cited by 18
Remaining Useful Life Estimation Using Neural Ordinary Differential Equations
Star, M., & McKee, K. K. (2021) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2021.v12i2.2938 · Cited by 16
Kanso, S., Jha, M., Galeotta, M., & Theilliol, D. (2022) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2022.07.112 · Cited by 13
Sternharz, G., Elhalwagy, A., & Kalganova, T. (2022) · IEEE Access · doi:10.1109/access.2022.3226780 · Cited by 14
Aero-Engine Remaining Useful Life Estimation Based on CAE-TCN Neural Networks
Ren, G., Wang, Y., Shi, Z., Zhang, G., Jin, F., & Wang, J. (2022) · Applied Sciences · doi:10.3390/app13010017 · Cited by 13
Prediction of Technical State of Mechanical Systems Based on Interpretive Neural Network Model
Kononov, E., Klyuev, A. V., & Анатольевич, Т. М. (2023) · Sensors · doi:10.3390/s23041892 · Cited by 15
Cao, Y., Jia, M., Zhao, X., Yan, X., & Liu, Z. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.119824 · Cited by 14
Automated Machine Learning for Remaining Useful Life Predictions
Zöller, M.-A., Mauthe, F., Zeiler, P., Lindauer, M., & Huber, M. F. (2023) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/smc53992.2023.10394031 · Cited by 13
Chen, Y.-Z., Feng, G.-L., Xiang, H.-C., Tsoutsanis, E., Pieyre, A., & Gou, L. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.122557 · Cited by 18
An Intelligent Diagnostic Method for Wear Depth of Sliding Bearings Based on MGCNN
Dai, J., Tian, L., & Chang, H. (2024) · Machines · doi:10.3390/machines12040266 · Cited by 14
Remaining useful life estimation based on selective ensemble of deep neural networks with diversity
Xia, T., Han, D., Jiang, Y., Shao, Y., Wang, D., Pan, E., & Xi, L. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102608 · Cited by 16
Guo, Y., Shi, H., & Dong, Z. (2024) · Computers & Industrial Engineering · doi:10.1016/j.cie.2024.110288 · Cited by 13
Lv, S., Xia, C., Cheng, C., Yan, J., & Wu, X. (2024) · Computers & Industrial Engineering · doi:10.1016/j.cie.2024.110542 · Cited by 14
Lin, C., Chen, Y., Bai, M., Long, Z., Yao, P., Liu, J., & Yu, D. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.110666 · Cited by 13
Remaining Useful Life Prediction with Uncertainty Quantification Using Evidential Deep Learning
Ayed, S. B., Broujeny, R. S., & Hamza, R. T. (2024) · Journal of Artificial Intelligence and Soft Computing Research · doi:10.2478/jaiscr-2025-0003 · Cited by 19
Tv, V., Chavan, D., Malhotra, P., Vig, L., & Shroff, G. M. (2019) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2019.v10i4.2612 · Cited by 22
A decision fusion based methodology for fault Prognostic and Health Management of complex systems
Tidriri, K., Verron, S., Tiplica, T., & Chatti, N. (2019) · Applied Soft Computing · doi:10.1016/j.asoc.2019.105622 · Cited by 13
Anomaly detection in a fleet of industrial assets with hierarchical statistical modeling
Dhada, M. H., Girolami, M., & Parlikad, A. K. (2020) · Data-Centric Engineering · doi:10.1017/dce.2020.19 · Cited by 13
Using Long-Short Term Memory Networks with Genetic Algorithm to Predict Engine Condition
Taşabat, S. E., & Aydın, O. (2021) · GAZI UNIVERSITY JOURNAL OF SCIENCE · doi:10.35378/gujs.937169 · Cited by 14
Yu, H., Chen, C., Lu, N., & Wang, C. (2021) · Sensors · doi:10.3390/s21248373 · Cited by 14
An RUL-informed approach for life extension of high-value assets
Ochella, S., Shafiee, M., & Sansom, C. (2022) · Computers & Industrial Engineering · doi:10.1016/j.cie.2022.108332 · Cited by 14
Metadata
- Authors
- Saxena, A., Goebel, K., Simon, D., & Eklund, N.
- Affiliations
- Ames Research Center (US)
- Glenn Research Center (US)
- GE Global Research (United States) (US)
- Venue
- 2008 International Conference on Prognostics and Health Management
- Publisher
- IEEE
- Published
- 2008-10
- Pages
- 1-9
- OpenAlex
- W2120841219
- Cited by
- 1,954
- References
- 15
- Citations by year
- 2026: 219 · 2025: 290 · 2024: 270 · 2023: 260 · 2022: 206 · 2021: 204 · 2020: 154 · 2019: 106 · 2018: 57 · 2017: 46 · 2016: 41 · 2015: 21 · 2014: 18 · 2013: 17 · 2012: 16
- FWCI
- 16.45
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- International Conference on Prognostics and Health Management (PHM) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Physical Sciences › Engineering › Automotive Engineering › Technical Engine Diagnostics and Monitoring
- Keywords
- damage propagation, aircraft gas turbine engines, prognostics and health management, health indicators, failure criteria, response surface, sensor data
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.