Power Cycling Reliability of Power Module: A Survey
Open accessThe DOI matches its Crossref record; 91 of the 94 references it cites were found in a registry or an index.
Abstract
Electronic devices using semiconductors such as insulated-gate bipolar transistors, metal-oxide-semiconductor field-effect transistors, and diodes are extensively used in electrical traction applications such as locomotive, elevators, subways, and cars. The long-term reliability of such power modules is then highly demanded, and their main reliability criterion is their power cycling capability. Thus, a power cycling test is the most important reliability test for power modules. This test consists in periodically applying a current to a device mounted onto a heat sink. This leads to power loss in the entire module and results in a rise in the semiconductor temperature. In this paper, the different kinds of semiconductors and power modules used for traction applications are described. Experimental and simulation methods employed for power cycling tests are presented. Modules' weak points and fatigue processes are pointed out. Then, a detailed statistical review of publications from 1994 to 2015 dealing with power cycling is presented. This review gives a clear overview of all studies dealing with power cycling that were carried out until now. It reveals the principal trends in power electronic devices and highlights the main reliability issues for which an important lack of knowledge remains.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Comparison of 6H-SiC, 3C-SiC, and Si for power devices
Bhatnagar, M., & Baliga, B. J. (1993) · IEEE Transactions on Electron Devices · doi:10.1109/16.199372 · Cited by 1,120
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039 · cited 2×
“Bond wires are often reported as the weakest component of power modules, responsible for device failures [15], [16], [37].”
BackgroundSemiconductor Power Devices: Physics, Characteristics, Reliability
Lutz, J., Schlangenotto, H., Scheuermann, U., & De Doncker, R. (2011) · Springer eBooks · doi:10.1007/978-3-642-11125-9 · Cited by 706
Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling
Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., & Berkani, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114313 · Cited by 620
Fast power cycling test of IGBT modules in traction application
Held, M., Jacob, P., Nicoletti, G., Scacco, P., & Poech, M.-H. (2002) · Proceedings of Second International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.1997.618742 · Cited by 585
(2008) · Cited by 578
Reliability of power cycling for igbt power semiconductor modules
Morozumi, A., Yamada, K., Miyasaka, T., Sumi, S., & Seki, Y. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.810661 · Cited by 256
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232
Power cycling induced failure mechanisms in solder layers
Herrmann, T., Feller, M., Lutz, J., Bayerer, R., & Licht, T. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417702 · Cited by 116
Hamidi, A., Beck, N., Thomas, K., & Herr, E. (1999) · Microelectronics Reliability · doi:10.1016/s0026-2714(99)00164-x · Cited by 106
Power cycling results for different control strategies
Scheuermann, U., & Schuler, S. C. (2010) · Microelectronics Reliability · doi:10.1016/j.microrel.2010.07.135 · Cited by 100
SKiN: Double side sintering technology for new packages
Stockmeier, T., Beckedahl, P., Gobl, C., & Malzer, T. (2011) · 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890856 · Cited by 94
Berkani, M., Khatir, Z., Ousten, J.-P., Badel, F., Dupont, L., & Lefebvre, S. (2007) · Microelectronics Reliability · doi:10.1016/j.microrel.2007.07.027 · Cited by 92
On the effect of power cycling stress on IGBT modules
Cova, P., & Fantini, F. (1998) · Microelectronics Reliability · doi:10.1016/s0026-2714(98)00081-x · Cited by 85
Power cycling with high temperature swing of discrete components based on different technologies
Amro, R., Lutz, J., & Lindemann, A. (2004) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1355239 · Cited by 85
Double-sided low-temperature joining technique for power cycling capability at high temperature
Amro, R., Lutz, J., Rudzki, J., Thoben, M., & Lindemann, A. (2005) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2005.219523 · Cited by 83
Advanced IGBT modules for railway traction applications: Reliability testing
Berg, H., & Wolfgang, E. (1998) · Microelectronics Reliability · doi:10.1016/s0026-2714(98)00150-4 · Cited by 79
Liu, Y. (2012) · Springer eBooks · doi:10.1007/978-1-4614-1053-9 · Cited by 77
New assembly and interconnect technologies for power modules
Guth, K., Oeschler, N., Boewer, L., Speckels, R., Strotmann, G., Heuck, N., Krasel, S., & Ciliox, A. (2012) · Cited by 76
Thin Film Cracking and Ratcheting Caused by Temperature Cycling
Huang, M., Suo, Z., Ma, Q., & Fujimoto, H. H. (2000) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2000.0177 · Cited by 76
Laurila, T. T., Mattila, T. T., Vuorinen, V., Karppinen, J., Li, J., Sippola, M., & Kivilahti, J. K. (2006) · Microelectronics Reliability · doi:10.1016/j.microrel.2006.07.095 · Cited by 75
Power cycling capability of Modules with SiC-Diodes
Herold, C., Schaefer, M., Sauerland, F., Poller, T., Lutz, J., & Schilling, O. (2014) · Cited by 74
Hung, T.-H., Chiang, S.-Y., Huang, C.-M., Lee, C., & Chiang, K. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.06.048 · Cited by 67
Separating Failure Modes in Power Cycling Tests
Schmidt, R., & Scheuermann, U. (2012) · Cited by 67
Failure analysis of power modules: a look at the packaging and reliability of large IGBTs
de lambilly, H., & Keser, H. O. (1993) · IEEE Transactions on Components Hybrids and Manufacturing Technology · doi:10.1109/33.237930 · Cited by 67
Fatigue and thermal fatigue damage analysis of thin metal films
Zhang, G., Volkert, C. A., Schwaiger, R., Mönig, R., & Kraft, O. (2007) · Microelectronics Reliability · doi:10.1016/j.microrel.2007.04.005 · Cited by 64
A Temperature-Gradient-Induced Failure Mechanism in Metallization Under Fast Thermal Cycling
Smorodin, T., Wilde, J., Alpern, P., & Stecher, M. (2008) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2008.2002359 · Cited by 62
Power cycling reliability of IGBT power modules
Sankaran, V. A., Chen, C., Avant, C. S., & Xu, X. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1997.630841 · Cited by 61
Coquery, G., & Lallemand, R. (2000) · Microelectronics Reliability · doi:10.1016/s0026-2714(00)00191-8 · Cited by 59
Power cycling induced failure mechanisms in the viewpoint of rough temperature environment
Lutz, J., Herrmann, T., Feller, M., Bayerer, R., Licht, T., & Amro, R. (2008) · Cited by 59
Investigation of the heel crack mechanism in Al connections for power electronics modules
Celnikier, Y., Benabou, L., Dupont, L., & Coquery, G. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.01.001 · Cited by 57
Tounsi, M., Oukaour, A., Tala‐Ighil, B., Gualous, H., Boudart, B., & Aïssani, D. (2010) · Microelectronics Reliability · doi:10.1016/j.microrel.2010.07.059 · Cited by 55
Thermal stress related packaging failure in power IGBT modules
Wu, W., Held, M., Jacob, P., Scacco, P., & Birolini, A. (2002) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.1995.515059 · Cited by 53
Impact of absolute junction temperature on power cycling lifetime
Schmidt, R., Zeyss, F., & Scheuermann, U. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6631835 · Cited by 52
Impact of SiC Power Electronic Devices for Hybrid Electric Vehicles
Tolbert, L. M., Ozpineci, B., ISLAM, S. K., & Peng, F. Z. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-1904 · Cited by 52
PLASTIC-STRAIN OF ALUMINIUM INTERCONNECTIONS DURING PULSED OPERATION OF IGBT MULTICHIP MODULES
CIAPPA, M., & MALBERTI, P. (1996) · Quality and Reliability Engineering International · doi:10.1002/(sici)1099-1638(199607)12:4<297::aid-qre21>3.0.co;2-c · Cited by 50
Reliability of silver sintering on DBC and DBA substrates for power electronic applications
Kraft, S., Schletz, A., & Maerz, M. (2022) · Fraunhofer-Publica (Fraunhofer-Gesellschaft) · doi:10.24406/publica-fhg-376976 · Cited by 45
Novel wire bond material for advanced power module packages
Schmidt, R., König, C., & Prenosil, P. (2012) · Microelectronics Reliability · doi:10.1016/j.microrel.2012.06.139 · Cited by 43
Power cycling lifetime estimation of IGBT power modules based on chip temperature modeling
Ikonen, M. (2012) · LUTPub (LUT University) · Cited by 42
A reliable technology concept for active power cycling to extreme temperatures
Nelhiebel, M., Illing, R., Schreiber, C., Wöhlert, S., Lanzerstorfer, S., Ladurner, M., Kadow, C., Decker, S., Dibra, D., Unterwalcher, H., et al. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.06.042 · Cited by 41
Feller, L., Hartmann, S., & Schneider, D. (2008) · Microelectronics Reliability · doi:10.1016/j.microrel.2008.07.019 · Cited by 41
High temperature reliability on automotive power modules verified by power cycling tests up to 150°C
Coquery, G., Lefranc, G., Licht, T., Lallemand, R., Seliger, N., & Berg, H. (2003) · Microelectronics Reliability · doi:10.1016/s0026-2714(03)00318-4 · Cited by 39
Aging of new Interconnect-Technologies of Power-Modules during Power-Cycling
Heuck, N., Guth, K., Thoben, M., Mueller, A., Oeschler, N., Boewer, L., Speckels, R., Krasel, S., & Ciliox, A. (2014) · Cited by 39
Goehre, Schneider-Ramelow, Geißler, & Lang (2010) · Cited by 39
Power Cycling at High Temperature Swings of Modules with Low Temperature Joining Technique
Amro, R., Lutz, J., Rudzki, J., Sittig, R., & Thoben, M. (2006) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2006.1666110 · Cited by 38
Substrate-to-base solder joint reliability in high power IGBT modules
Herr, E., Frey, T., Schlegel, R., Stuck, A., & Zehringer, R. (1997) · Microelectronics Reliability · doi:10.1016/s0026-2714(97)00147-9 · Cited by 36
Glavanovics, M., Detzel, T., & Weber, K. (2004) · Proceedings of ESSCIRC · doi:10.1109/essder.2004.1356542 · Cited by 34
Lifetime modeling and simulation of power modules for hybrid electrical/electrical vehicles
Thoben, M., Sauerland, F., Mainka, K., Edenharter, S., & Beaurenaut, L. (2014) · Microelectronics Reliability · doi:10.1016/j.microrel.2014.07.009 · Cited by 34
Combined experimental- and FE-studies on sinter-Ag behaviour and effects on IGBT-module reliability
Dudek, R., Döring, R., Sommer, P., Seiler, B., Kreyßig, K., Walter, H., Becker, M., & Gunther, M. (2014) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime.2014.6813870 · Cited by 34
Stupar, A., Bortis, D., Drofenik, U., & Kolar, J. W. (2010) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2010.5542179 · Cited by 33
Rudzki, J., Becker, M., Eisele, R., Poech, M., & Osterwald, F. (2014) · Fraunhofer-Publica (Fraunhofer-Gesellschaft) · Cited by 33
Increased lifetime of wire bonding connections for IGBT power modules
Hamidi, A. S., Kaufmann, S., & Herr, E. (2002) · doi:10.1109/apec.2001.912494 · Cited by 31
Packaging factors affecting the fatigue life of power transistor die bonds
Evans, J., & Evans, J. Y. (1998) · IEEE Transactions on Components Packaging and Manufacturing Technology Part A · doi:10.1109/95.725210 · Cited by 31
Reliability testing of high-power multi-chip IGBT modules
Lefranc, G., Licht, T., Schultz, H.-J., Beinert, R., & Mitić, G. (2000) · Microelectronics Reliability · doi:10.1016/s0026-2714(00)00185-2 · Cited by 30
Ageing Test Results of low voltage MOSFET Modules for electrical vehicles
Dupont, L., Lefebvre, S., Berkani, M., Khatir, Z., Faugières, J. C., & Emorine, F. (2007) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417433 · Cited by 28
Approach of a physically based lifetime model for solder layers in power modules
Steinhorst, P., Poller, T., & Lutz, J. (2013) · Microelectronics Reliability · doi:10.1016/j.microrel.2013.07.094 · Cited by 27
Thermal analysis of power cycling effects on high power IGBT modules by the boundary element method
Khatir, Z., & Lefebvre, S. (2002) · doi:10.1109/stherm.2001.915141 · Cited by 26
3D electro-thermal investigations for reliability of ultra low ON state resistance power MOSFET
Sauveplane, J. B., Tounsi, P., Scheid, E., & Deram, A. (2008) · Microelectronics Reliability · doi:10.1016/j.microrel.2008.06.022 · Cited by 24
Berkani, M., Khatir, Z., Ousten, J.-P., Dupont, L., Lefebvre, S., & Badel, F. (2007) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417457 · Cited by 24
Impact of solder fatigue on module lifetime in power cycling tests
Scheuermann, U., & Schmidt, R. (2011) · Cited by 23
Smorodin, T., Wilde, J., Alpern, P., & Stecher, M. (2007) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/relphy.2007.369939 · Cited by 22
Hamidi, A. S., & Coquery, G. (1997) · Microelectronics Reliability · doi:10.1016/s0026-2714(97)00154-6 · Cited by 22
Dupont, L., Coquery, G., Kriegel, K., & Melkonyan, A. (2009) · Microelectronics Reliability · doi:10.1016/j.microrel.2009.07.050 · Cited by 20
Observation of chip solder degradation by electrical measurements during power cycling
Hartmann, S., Bayer, M. J., Schneider, D., & Feller, L. (2010) · Cited by 20
Power MOSFET active power cycling for medical system reliability assessment
Sow, A., Somaya, S., Ousten, Y., Vinassa, J.-M., & Patoureaux, F. (2013) · Microelectronics Reliability · doi:10.1016/j.microrel.2013.07.096 · Cited by 18
Hensler, A., Lutz, J., Thoben, M., & Guth, K. (2010) · Cited by 18
Hensler, A., Lutz, J., Thoben, M., & Zachariae, J. (2010) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc.2010.5642894 · Cited by 18
Shinohara, K., & Yu, Q. (2010) · Engineering · doi:10.4236/eng.2010.212127 · Cited by 15
Modelling of metal degradation in power devices under active cycling conditions
Kanert, W., Pufall, R., Wittler, O., Dudek, R., & Bouazza, M. T. (2011) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/esime.2011.5765771 · Cited by 15
Accelerated Active High-Temperature Cycling Test for Power MOSFETs
Schacht, R., Wunderle, B., Auerswald, E., Michel, B., & Reichl, H. (2006) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2006.1645468 · Cited by 15
Thermal impedance spectroscopy of power modules during power cycling
Henlser, A., Wingert, D., Herold, C., Lutz, J., & Thoben, M. (2011) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890841 · Cited by 15
Azoui, T., Tounsi, P., Dupuy, P., Guillot, L., & Dorkel, J. M. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.06.018 · Cited by 14
Berkani, M., Khatir, Z., Ousten, J.-P., Lefebvre, S., & Dupont, L. (2007) · HAL · Cited by 14
Anzawa, T., Yu, Q., Yamagiwa, M., Shibutani, T., & SHIRATORI, M. (2008) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2008.4544351 · Cited by 13
A Novel Power Module Design and Technology for Improved Power Cycling Capability
Scheuermann, U., & Herr, E. (2001) · Microelectronics Reliability · doi:10.1016/s0026-2714(01)00205-0 · Cited by 11
Extending the lifetime of power electronic assemblies by increased cooling temperatures
Hutzler, A., Tokarski, A., & Schletz, A. (2013) · Microelectronics Reliability · doi:10.1016/j.microrel.2013.07.029 · Cited by 11
The Investigation on the Lifetime Prediction Model of IGBT Module
Liu, B., Liu, D., Tang, Y., & Chen, M. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.10.053 · Cited by 10
Bonding wire life prediction model of the power module under power cycling test
Hung, T.-Y., Wang, C.-C., & Chiang, K. (2013) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime.2013.6529915 · Cited by 10
Aging test results for high temperature TRIACs during power cycling
Jacques, S., Batut, N., Leroy, R., & Gonthier, L. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4592308 · Cited by 10
Observation of chip solder degradation by electrical measurements during power cycling
Hartmann, Schneider, & Feller (2010) · Cited by 8
Amro, R. (2006) · Qucosa (Saxon State and University Library Dresden) · Cited by 7
Berkani, M. (2008) · HAL (Le Centre pour la Communication Scientifique Directe) · Cited by 7
Rittner, M., Gross, D. C., Guyenot, M., Guenther, M., Haag, S. T., Kaden, T. A., Reinold, M., Thoben, M., Stegmeier, S., Weidner, K., et al. (2014) · Cited by 6
Dugal, F., & Ciappa, M. (2015) · IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) · doi:10.1109/ipfa.2015.7224318 · Cited by 5
Ferreira, J. F., Fernandes, F. M. B., Gonçalves, C., Nunes, P., Fortunato, E. M. C., Martins, R., Martins, J. I. F. D. P., & Marvão, A. P. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(00)00859-5 · Cited by 5
Lastwechselfestigkeit von Halbleiter-Leistungsmodulen für den Einsatz in Hybridfahrzeugen
Hensler, A. (2012) · Cited by 4
Aubert, A., Jacques, S., Pétremont, S., Labat, N., & Frémont, H. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.07.071 · Cited by 3
Investigation of interface delamination of EMC-copper interfaces in molded electronic packages
Yadur, A., Gromala, P. J., Green, S., & Daud, K. M. (2013) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime.2013.6529996 · Cited by 3
Carubelli, S. (2003) · Publications Et Travaux Academiques de Lorraine (Universite de Lorraine) · Cited by 2
Fiabilité prédictive de composants de puissance soumis à des tests de fatigue accélérée
Khong, B. (2007) · Cited by 1
A simplified and meaningful crack propagation model in silicon for microelectronic power devices
Calvez, D., Roqueta, F., Jacques, S., Ducret, S., Béchou, L., & Ousten, Y. (2012) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/esime.2012.6191721 · Cited by 1
Research works printed but not linked: 17
- liew, 0, Electromigration interconnect lifetime under AC and pulsed DC stress, Proc IEEE 27th Int Rel Symp, 215
- 2010, Halbleiterbauelemente—Mechanische und klimatische Prüfverfahren—Teil 34 Lastwechselprüfung
- 2013, Environmental test methods for semiconductor devices Part 1 Test methods 1000 through 1999
- 2007, Power Cycling
- khong, 2007, Fiabilité Prédictive de Composants de Puissance Soumis a des Tests de Fatigue Accélérée
- scheuermann, 0, Power cycling lifetime of advanced power modules for different temperature swings, Proc PCIM Eur, 59
- ong, 0, Heavy Al ribbon interconnect: An alternative solution for hybrid power packaging, Proc IMAPS Int J Microcircuits Electron Packag, 1
- guth, 0, New assembly and interconnects beyond sintering methods, Proc PCIM, 1
- stupar, 0, Lifetime model for solder layers, Proc ECPE Workshop, 1
- böttcher, 0, Laboratory setup for power cycling of IGBT modules with monitoring of ON-state voltage and thermal resistance for state of aging detection, Proc Int Exhib Conf Power Electron Intell Motion Renew Energy Manage PCIM, 1
- hutzler, 2014, Power Cycling Community 1995–2014, Bodo's Power Syst, 2014, 78
- thoben, 0, Modelling and experimental investigations on degradation of microcomponents in power cycling, Proc Ansys Paper, 1
- farassat, 2007, More performance at lower cost—Heavy aluminium ribbon bonding, 1
- 2014, Data sheet for power discrete device SO8-FL
- benzler, 0, New module generation for higher lifetime, Proc Bodo's Power Syst, 30
- jacques, 2010, Etude de la Fatigue Thermomécanique des Composants de Puissance de Type TRIAC Soumis a des Cycles Actifs de Températures
- bouarroudj-berkani, 2008, Etude de la thermo-mécanique de modules electroniques de puissance en ambiance de températures elevées pour des applications de traction de véhicules electriques et hybrides
Cited by
A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
Lee, H., Smet, V., & Tummala, R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2951801 · Cited by 526
“conventional power module package are wire bond lift-off, cracking or delamination of solder die (or substrate) attach, and chip metallization on the top side [37], [38].”
BackgroundOverview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
“Thus, Rth_jc could be used as an indicator of the solder layer failures [113].”
Reliability of Power Electronic Systems for EV/HEV Applications
Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3031041 · Cited by 249
“Power cycling testing of power modules is essential to understand the wear out of the power components, when they are in operation, and predict when failures might occur [13], for example, through degradation.”
BackgroundChoi, U.-M., Blaabjerg, F., & Jorgensen, S. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2690500 · Cited by 248
“Typically, in the PC test, high Tj (40 °C∼100 °C) and Tjm (60 °C∼120 °C) are applied to the DUT in order to obtain test results in a reasonable test time [16], [31].”
MethodA Review on IGBT Module Failure Modes and Lifetime Testing
Abuelnaga, A., Narimani, M., & Bahman, A. S. (2021) · IEEE Access · doi:10.1109/access.2021.3049738 · Cited by 246
“important for the verification of models generated from DC platforms [21], [28], [90], [91].”
Background
Metadata
- Authors
- Durand, C., Klingler, M., Coutellier, D., & Naceur, H.
- Affiliations
- Laboratoire d'Automatique, de Mécanique et d'Informatique Industrielles et Humaines (FR)
- Robert Bosch (Germany) (DE)
- Centre National de la Recherche Scientifique (FR)
- Venue
- IEEE Transactions on Device and Materials Reliability
- Published
- 2016-03
- Volume
- 16
- Issue
- 1
- Pages
- 80-97
- ISSN
- 1530-4388 (ISSN-L)
- 1558-2574
- OpenAlex
- W2294980933
- Cited by
- 239
- References
- 94
- Citations by year
- 2026: 26 · 2025: 29 · 2024: 24 · 2023: 29 · 2022: 26 · 2021: 29 · 2020: 19 · 2019: 25 · 2018: 17 · 2017: 12 · 2016: 3
- FWCI
- 8.76
- Type
- journal article
- Language
- en
- Open access
- green
- uphf.hal.science
- Locations
- IEEE Transactions on Device and Materials Reliability (publishedVersion)
- HAL (submittedVersion, other-oa)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- power cycling reliability, power modules, power devices, traction applications, IGBT, metal-oxide-semiconductor field-effect transistors, power cycling test, fatigue process, heat sinks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.