On the Accuracy of Fault Detection and Separation in Permanent Magnet Synchronous Machines Using MCSA/MVSA and LDA
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
In this paper, the motor current/voltage signature analysis and linear discriminant analysis (LDA) are evaluated with respect to the accuracy to detect the status of permanent magnet synchronous machines (PMSMs) whether it is healthy or faulted, determine the type of that fault, and estimate the severity in the case of static eccentricity or turn-to-turn short-circuit fault. Three types of faults are discussed: static eccentricity, turn-to-turn short circuit, and partial demagnetization fault. Two-dimensional finite element analysis (FEA) is used to model and simulate the machine under healthy and faulted conditions. Fast Fourier transform is applied to the phase voltage or current signals to obtain the frequency spectrum. A combination of the amplitude of the harmonics of the stator voltage or current signals are used as detailed features for the classifier for fault detection. LDA is chosen as a classification method for both detecting the fault and estimating its severity. Two different winding types of PMSMs are tested: a concentrated and a distributed winding machine. To validate the simulation results, experiments at different operational points are carried out and the results are compared with the sFEA.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In addition, fault detection accuracy based on current signal analysis is significantly influenced by inverter output harmonics, load fluctuations and controller settings [87], [88].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [88]
In the citing paper
“The usage of FFT analysis requires a compromise between the precision of the assessment of damage symptoms and the minimum computational effort [86], [88].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [88]
Citations
Cites
Martinez, A. M., & Kak, A. C. (2001) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.908974 · Cited by 3,249
Static-, Dynamic-, and Mixed-Eccentricity Fault Diagnoses in Permanent-Magnet Synchronous Motors
Ebrahimi, B. M., Faiz, J., & Roshtkhari, M. J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2029577 · Cited by 386
Nandi, S., Ahmed, S., & Toliyat, H. A. (2001) · IEEE Transactions on Energy Conversion · doi:10.1109/60.937205 · Cited by 340
Classification, estimation, and pattern recognition
Young, T. Y., & Calvert, T. W. (1974) · International Linear Collider · Cited by 332
Da, Y., Shi, X., & Krishnamurthy, M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227808 · Cited by 303
Nandi, S., Ahmed, S., & Toliyat, H. (2001) · IEEE Power Engineering Review · doi:10.1109/mper.2001.4311622 · Cited by 298
Detecting Rotor Faults in Low Power Permanent Magnet Synchronous Machines
le Roux, W., Harley, R. G., & Habetler, T. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886620 · Cited by 274
Hong, J., Park, S., Hyun, D., Kang, T.-J., Lee, S. B., Kral, C., & Haumer, A. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2191253 · Cited by 219
Ebrahimi, B. M., & Faiz, J. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2050496 · Cited by 208
Thomson, W. T., & Barbour, A. (1998) · IEEE Transactions on Energy Conversion · doi:10.1109/60.736320 · Cited by 173
Research works printed but not linked: 2
- roux, 0, Rotor fault analysis of a permanent magnet synchronous machine, Proc 15th Int Conf Electr Mach
- rosero, 0, On-line condition monitoring technique for PMSM perated with eccentricity, Proc IEEE Int Symp Diag Electr Mach Power Electron Drives, 95
Cited by
A review on fault detection and diagnosis techniques: basics and beyond
Abid, A., Khan, M. T., & Iqbal, J. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09934-2 · Cited by 436
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“The usage of FFT analysis requires a compromise between the precision of the assessment of damage symptoms and the minimum computational effort [86], [88].”
BackgroundMethodInfluentialMotor Fault Diagnostics Based on Current Signatures: A Review
Niu, G., Dong, X., & Chen, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3285999 · Cited by 269
Zafarani, M., Bostanci, E., Qi, Y., Goktas, T., & Akin, B. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2811538 · Cited by 208
A Model-Based Strategy for Interturn Short-Circuit Fault Diagnosis in PMSM
Mazzoletti, M. A., Bossio, G. R., De Angelo, C. H., & Espinoza-Trejo, D. R. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2688973 · Cited by 214
Faults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review
Chen, Y., Liang, S., Li, W., Liang, H., & Wang, C. (2019) · Applied Sciences · doi:10.3390/app9102116 · Cited by 194
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Hang, J., Zhang, J., Xia, M., Ding, S., & Hua, W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2953269 · Cited by 150
Detection of Deterioration of Three-phase Induction Motor using Vibration Signals
Głowacz, A., Glowacz, W., Kozik, J., Piech, K., Gutten, M., Caesarendra, W., Liu, H., Brumerčík, F., Irfan, M., & Khan, Z. F. (2019) · Measurement Science Review · doi:10.2478/msr-2019-0031 · Cited by 130
Skowron, M., Orłowska-Kowalska, T., Wolkiewicz, M., & Kowalski, C. T. (2020) · Energies · doi:10.3390/en13061475 · Cited by 125
Skowron, M., Orłowska-Kowalska, T., & Kowalski, C. T. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3146557 · Cited by 113
Zhang, P., Gao, Z., Cao, L., Dong, F., Zou, Y., Wang, K., Zhang, Y., & Sun, P. (2022) · Machines · doi:10.3390/machines10020072 · Cited by 128
Song, X., Zhao, J., Song, J., Dong, F., Xu, L. H., & Zhao, J. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2967053 · Cited by 103
Airgap Search Coil Based Identification of PM Synchronous Motor Defects
Rafaq, M. S., Lee, H., Park, Y., Lee, S. B., Orviz, M., Fernández, D., Reigosa, D., & Briz, F. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3095810 · Cited by 74
A review of current issues of marine current turbine blade fault detection
Xie, T., Wang, T., He, Q., Diallo, D., & Claramunt, C. (2020) · Ocean Engineering · doi:10.1016/j.oceaneng.2020.108194 · Cited by 72
Huang, W., Du, B., Li, T., Sun, Y., Cheng, Y. Z., & Cui, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3213512 · Cited by 72
Robust Stator Winding Fault Detection in PMSMs With Respect to Current Controller Bandwidth
Huang, S., Aggarwal, A., Strangas, E. G., Li, K., Niu, F., & Huang, X. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3030036 · Cited by 70
Self-citationVibration‐Based Fault Diagnosis of Commutator Motor
Głowacz, A., & Glowacz, W. (2018) · Shock and Vibration · doi:10.1155/2018/7460419 · Cited by 67
A Voltage-Based Approach for Fault Detection and Separation in Permanent Magnet Synchronous Machines
Haddad, R. Z., Lopez, C. A., Foster, S. N., & Strangas, E. G. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2726072 · Cited by 65
Self-citationZhao, J., Wang, L., Xu, L. H., Dong, F., Song, J., & Yang, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3050360 · Cited by 59
Zhang, X., Hu, Y., Deng, J., Xu, H., & Wen, H. (2022) · IEEE Access · doi:10.1109/access.2022.3157820 · Cited by 61
A Review of Modeling and Diagnostic Techniques for Eccentricity Fault in Electric Machines
Liu, Z., Zhang, P., He, S., & Huang, J. E. (2021) · Energies · doi:10.3390/en14144296 · Cited by 57
Gyftakis, K. N., Rasid, S. A., Skarmoutsos, G. A., & Mueller, M. A. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2021.3071598 · Cited by 52
Delpha, C., Diallo, D., Samrout, H. A., & Moubayed, N. (2018) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2018.04.007 · Cited by 45
Zamudio-Ramírez, I., Osornio-Rios, R. A., Daviu, J. A. A., & Quijano-López, A. (2020) · Sensors · doi:10.3390/s20051477 · Cited by 43
Fault Detection of Permanent Magnet Synchronous Machines: An Overview
Li, H., Zhu, Z. Q., Azar, Z., Clark, R., & Wu, Z. (2025) · Energies · doi:10.3390/en18030534 · Cited by 42
Machine Learning-Based Stator Current Data-Driven PMSM Stator Winding Fault Diagnosis
Pietrzak, P., & Wolkiewicz, M. (2022) · Sensors · doi:10.3390/s22249668 · Cited by 44
Wang, M., Zhou, D., Chen, M., & Wang, Y. (2020) · Control Engineering Practice · doi:10.1016/j.conengprac.2020.104522 · Cited by 43
Du, B., Huang, W., Cheng, Y. Z., Chen, J., Tao, R., & Cui, S. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3363733 · Cited by 41
Eccentricity fault diagnosis indices for permanent magnet machines: state‐of‐the‐art
Faiz, J., & Nejadi-Koti, H. (2019) · IET Electric Power Applications · doi:10.1049/iet-epa.2018.5751 · Cited by 42
Głowacz, A., Glowacz, W., Głowacz, A., Kozik, J., Gutten, M., Korenčiak, D., Khan, Z. F., Irfan, M., & Carletti, E. (2017) · Archives of Metallurgy and Materials · doi:10.1515/amm-2017-0355 · Cited by 40
Lee, C., Le, T., & Lin, Y.-T. (2022) · IEEE Access · doi:10.1109/access.2022.3177735 · Cited by 38
Nazemi, M., Liang, X., & Haghjoo, F. (2024) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2024.3362915 · Cited by 37
Fault Detection and Condition Monitoring of PMSGs in Offshore Wind Turbines
Freire, N. M. A., & Cardoso, A. J. M. (2021) · Machines · doi:10.3390/machines9110260 · Cited by 39
Feng, X., Wang, B., Liu, C., Zeng, J., & Wang, Z. (2023) · CES Transactions on Electrical Machines and Systems · doi:10.30941/cestems.2023.00050 · Cited by 35
Kwon, W., Lee, J., Choi, S., & Kim, N. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.122515 · Cited by 37
Krzysztofiak, M., Skowron, M., & Orlowska-Kowalska, T. (2020) · Energies · doi:10.3390/en14010153 · Cited by 33
“The most popular method used for the diagnosis of inter-turn short-circuits is the spectral analysis of the stator current [19,20] in which the components of the stator current spectrum obtained from the short-circuit PMSM model are analyzed for the extraction of short-circuit symptoms.”
MethodA Search Coil Design Method of PMSM for Detection of Inter-Turn Short-Circuit Fault
Li, R., Fang, H., Li, D., Qu, R., Yang, S., & Wang, R. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2023.3274879 · Cited by 33
Martin-Diaz, I., Moríñigo-Sotelo, D., Duque-Pérez, Ó., Arredondo-Delgado, P. A., Camarena‐Martinez, D., & Romero-Troncoso, R. D. J. (2017) · Electric Power Systems Research · doi:10.1016/j.epsr.2017.06.021 · Cited by 33
Wei, S., Zhang, X., Xu, Y., Fu, Y., Ren, Z., & Li, F. F. (2020) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2020.0127 · Cited by 33
Pietrzak, P., & Wolkiewicz, M. (2023) · Electronics · doi:10.3390/electronics12071543 · Cited by 33
A Torque Angle-Based Fault Detection and Identification Technique for IPMSM
Ullah, Z., Lee, S.-T., & Hur, J. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2947401 · Cited by 34
Verkroost, L., Bisschop, J. D., Vansompel, H., Belie, F. D., & Sergeant, P. (2020) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2019.2958071 · Cited by 33
Skarmoutsos, G. A., Gyftakis, K. N., & Mueller, M. A. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3053993 · Cited by 33
Advances in fault detection techniques for automated manufacturing systems in industry 4.0
Ahmed, Y. S., Abubakar, A. A., Arif, A. F. M., & Al-Badour, F. (2025) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2025.1564846 · Cited by 35
Huang, Y., Yuan, B., Xu, S., & Han, T. (2022) · Processes · doi:10.3390/pr10091679 · Cited by 28
Frequency Response Analysis (FRA) Fault Diagram Assessment Method
Mugarra, A., Mayora, H., Guerrero, J. M., & Platero, C. A. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3131425 · Cited by 26
Ge, Y., Song, B., Pei, Y., Mollet, Y., & Gyselinck, J. J. C. (2018) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2018.2878343 · Cited by 26
Skarmoutsos, G. A., Gyftakis, K. N., & Mueller, M. A. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2021.3123662 · Cited by 25
Bahloul, I., Bouzid, M. B. K., Khil, S. K. E., & Champenois, G. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3236898 · Cited by 21
Rotor Faults Diagnosis in PMSMs Based on Branch Current Analysis and Machine Learning
Yu, Y., Gao, H., Zhou, S., Pan, Y., Zhang, K., Liu, P. J., Yang, H. X., Zhao, Z., & Madyira, D. M. (2023) · Actuators · doi:10.3390/act12040145 · Cited by 20
Xia, Y., Wang, W.-T., & Li, X. (2024) · IEEE Access · doi:10.1109/access.2024.3373880 · Cited by 20
Panagiotou, P. A., Arvanitakis, I., Lophitis, N., Daviu, J. A. A., & Gyftakis, K. N. (2019) · IET Electric Power Applications · doi:10.1049/iet-epa.2018.5512 · Cited by 23
Interturn short‐circuit fault diagnosis in PMSM with partitioned stator windings
Mazzoletti, M. A., Bossio, G. R., & Angelo, C. H. D. (2020) · IET Electric Power Applications · doi:10.1049/iet-epa.2020.0080 · Cited by 23
Wei, J., Xie, T., Shi, M., He, Q., Wang, T., & Amirat, Y. (2021) · Journal of Marine Science and Engineering · doi:10.3390/jmse9030248 · Cited by 21
Jang, J., & Kim, C. O. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.116028 · Cited by 20
Gyftakis, K. N., Garcia-Calva, T. A., Skarmoutsos, G. A., Moríñigo-Sotelo, D., Mueller, M. A., & Romero-Troncoso, R. D. J. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3221699 · Cited by 18
Navarro-Navarro, Á., Ruiz-Sarrio, J. E., Biot-Monterde, V., Daviu, J. A. A., Becker, V., & Urschel, S. (2023) · Machines · doi:10.3390/machines11020288 · Cited by 17
Wang, B., Wang, Y., Zhang, Z., Tang, M., Vakil, G., & Yang, T. (2025) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2025.000139 · Cited by 18
Fault diagnosis and failure prognosis of electrical drives
Strangas, E. G. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822473-1.00008-2 · Cited by 18
Self-citationDu, B., Huang, W., Li, T., Hu, R., Cheng, Y. Z., & Cui, S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3468271 · Cited by 16
DPMSLM Demagnetization Fault Detection Based on Texture Feature Analysis of Grayscale Fusion Image
Song, J., Liu, S., Duan, Z., Wu, X., Ding, W. M., Wang, X., & Lu, S. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3259035 · Cited by 16
Demirel, A., Keysan, O., El-Dalahmeh, M., & Al‐Greer, M. (2024) · Measurement · doi:10.1016/j.measurement.2024.114684 · Cited by 14
Detection of Demagnetization Faults in Axial Flux Permanent-Magnet Synchronous Wind Generators
Lamprokostopoulos, A., Mitronikas, E. D., & Barmpatza, A. C. (2022) · Energies · doi:10.3390/en15093220 · Cited by 14
Gyftakis, K. N., Skarmoutsos, G. A., Barajas-Solano, I., Burchell, J., & Mueller, M. A. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3299905 · Cited by 14
Huang, S., Bi, Z., Sun, Z., Aggarwal, A., Huang, X., Wu, L., & Niu, F. (2022) · Energies · doi:10.3390/en15093248 · Cited by 14
Jeong, H., Lee, H., & Kim, S. W. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558191 · Cited by 14
Li, Z., Wang, F., Xie, H., Ke, D., Ye, T., Davari, S. A., & Kennel, R. M. (2023) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2023.3331580 · Cited by 13
Buabeng, A., Simons, A. J., Frempong, N. K., & Ziggah, Y. Y. (2022) · Mathematical Problems in Engineering · doi:10.1155/2022/4372567 · Cited by 14
Xing, M., Ding, H. W., Ren, X., Wang, T., Ge, S., & Shen, J. (2021) · CAA Symposium on Fault Detection, Supervision and Safety for Technical Processes (SAFEPROCESS) · doi:10.1109/safeprocess52771.2021.9693649 · Cited by 13
Parametric Fault Diagnosis of Analog Circuits Based on a Semi-Supervised Algorithm
Wang, L., Zhou, D., Tian, H., Zhang, H., & Zhang, W. (2019) · Symmetry · doi:10.3390/sym11020228 · Cited by 12
Intelligent reliability assurance methodologies for engineering systems: advances and challenges
Liu, Z., Zhang, Q., Liu, Y., Lei, Y., & Zuo, M. J. (2025) · Journal of Reliability Science and Engineering · doi:10.1088/3050-2454/ae047e · Cited by 11
Fault Diagnosis in Electrical Machines for Traction Applications: Current Trends and Challenges
Pastura, M., & Zigliotto, M. (2024) · Energies · doi:10.3390/en17215440 · Cited by 10
Pietrzak, P., & Wolkiewicz, M. (2024) · Power Electronics and Drives · doi:10.2478/pead-2024-0007 · Cited by 12
Zhan, H., Liu, W., Lyu, Z., Niu, S., Wu, L., & Chau, K. T. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3574542 · Cited by 10
A model-based signal processing method for fault diagnosis in PMSM machine
Heydarzadeh, M., Zafarani, M., Uğur, E., Akin, B., & Nourani, M. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096575 · Cited by 11
Suti, A., Rito, G. D., & Galatolo, R. (2022) · Aerospace · doi:10.3390/aerospace9080401 · Cited by 10
Gyftakis, K. N., Platero, C. A., Zhang, Y., & Bernal, S. (2019) · Energies · doi:10.3390/en12132476 · Cited by 10
Stator Faults Detection on Induction Motors Using Harmonic Sequence Current Components Analysis
Mazzoletti, M. A., Donolo, P. D., Pezzani, C. M., Oliveira, M. O., Bossio, G. R., & Angelo, C. H. D. (2021) · IEEE Latin America Transactions · doi:10.1109/tla.2021.9448286 · Cited by 11
Eccentricity fault detection in synchronous reluctance machines
Safa, H. H., & Zarchi, H. A. (2023) · Electrical Engineering · doi:10.1007/s00202-023-01990-5 · Cited by 9
Faraj, H. Z., Al-Dujaili, A. Q., & Humaidi, A. J. (2023) · IEEE Conference on Systems, Process and Control · doi:10.1109/icspc59664.2023.10420154 · Cited by 9
A Review of Fault Diagnosis Methods of Robot Joint Servo System
Wu, H. Q., & Feng, J. (2020) · IEEE International Conference on Mechatronics and Automation (ICMA) · doi:10.1109/icma49215.2020.9233583 · Cited by 13
Jang, J. (2022) · Soft Computing · doi:10.1007/s00500-022-07625-4 · Cited by 8
Allafi, I. M., & Foster, S. N. (2023) · Energies · doi:10.3390/en16031477 · Cited by 8
Verkroost, L., Druant, J., Vansompel, H., Belie, F. D., & Sergeant, P. (2019) · Energies · doi:10.3390/en12050782 · Cited by 8
Modeling and Diagnosis of Stator Winding Faults in PMSM using Motor Current Signature Analysis
Gherabi, Z., Toumi, D., Benouzza, N., & Henini, N. (2019) · International Aegean Conference on Electrical Machines and Power Electronics & International Conference on Optimization of Electrical and Electronic Equipment (ACEMP-OPTIM) · doi:10.1109/acemp-optim44294.2019.9007162 · Cited by 8
Fault Detection and Identification for Inverter-Driven Permanent Magnet Synchronous Machines
Allafi, I. M., & Foster, S. N. (2021) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped51010.2021.9605501 · Cited by 8
Linear discriminant analysis for an automatic detection of stator faults in induction motor drives
Frosini, L., Zanazzo, S., & Beccarisi, F. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062402 · Cited by 8
PMSG fault identification applied to wind power
Kuchenbecker, W. E., da Rosa, W. M., & Teixeira, J. C. (2018) · Electric Power Systems Research · doi:10.1016/j.epsr.2018.08.010 · Cited by 8
Gyftakis, K. N., Platero, C. A., & Nøland, J. K. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3294902 · Cited by 7
Ziad, H., Al-Dujaili, A. Q., & Humaidi, A. J. (2024) · International Review of Applied Sciences and Engineering · doi:10.1556/1848.2024.00885 · Cited by 7
Nazemi, M., & Liang, X. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3565246 · Cited by 7
Detection of Shaft Misalignment of a PMSM using Zoom-FFT
Koutrakos, K., & Mitronikas, E. D. (2023) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped54949.2023.10271410 · Cited by 7
Detection of torque oscillations in induction motor drives by linear discriminant analysis
Frosini, L., Albini, A., & Beccarisi, F. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062403 · Cited by 7
Uncertainty-Aware Fault Diagnosis of Rotating Compressors Using Dual-Graph Attention Networks
Lee, S., Kim, Y.-S., Choi, H.-J., & Ji, B. (2025) · Machines · doi:10.3390/machines13080673 · Cited by 6
Chen, C., Lin, C.-J., Yang, F.-J., & Lin, F. (2024) · Applied Sciences · doi:10.3390/app14209570 · Cited by 7
Verkroost, L., Vansompel, H., Belie, F. D., & Sergeant, P. (2020) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem49940.2020.9271005 · Cited by 6
Detection and Identification of Demagnetization in PM Generators During Transient Conditions
Gyftakis, K. N., Garcia-Calva, T. A., Skarmoutsos, G. A., Moríñigo-Sotelo, D., Mueller, M. A., & Romero-Troncoso, R. D. J. (2021) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped51010.2021.9605517 · Cited by 6
Li, X., Sun, H., Zhang, L., Niu, F., Yu, L., & Ren, X. (2019) · Energies · doi:10.3390/en12010134 · Cited by 6
Fault Diagnosis of Inter-turn Short Circuit Faults in Dual Three-Phase PMSM Drives
He, Z., Wang, Z., Duan, C., & Wang, X. (2021) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped51010.2021.9605518 · Cited by 8
Metadata
- Authors
- Haddad, R. Z., & Strangas, E. G.
- Affiliations
- Michigan State University (US)
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2016-09
- Volume
- 31
- Issue
- 3
- Pages
- 924-934
- ISSN
- 0885-8969 (ISSN-L)
- 1558-0059
- OpenAlex
- W2343408121
- Cited by
- 158
- References
- 27
- Citations by year
- 2026: 8 · 2025: 18 · 2024: 14 · 2023: 22 · 2022: 25 · 2021: 22 · 2020: 20 · 2019: 13 · 2018: 9 · 2017: 7
- FWCI
- 8.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Energy Conversion (publishedVersion)
- Funders
- National Science Foundation (ECCS1102316)
- Jordan University of Science and Technology (TEC-00317-2015)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- permanent magnet synchronous motor, fault detection, fault classification, linear discriminant analysis, motor current signature analysis, static eccentricity, turn-to-turn short circuit, partial demagnetization, fault severity estimation, concentrated winding, distributed winding, harmonic characteristics, finite element analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.