The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Modeling the Universal Set/Reset Characteristics of Bipolar RRAM by Field- and Temperature-Driven Filament Growth
Abstract
Resistive switching memory (RRAM) devices generally rely on the formation/dissolution of conductive filaments through insulating materials, such as metal oxides and chalcogenide glasses. Understanding the mechanisms for filament formation and disruption in resistive switching materials is a critical step toward the development of reliable and controllable RRAM for future-generation storage. In particular, the capability to control the filament resistance and the reset current through the compliance current during filament formation may provide a key signature to clarify the switching mechanism. This paper provides a physically based explanation for the universal resistance switching in bipolar RRAM devices. A numerical model of filament growth based on thermally activated ion migration accounts for the resistance switching characteristics. The same physical picture is extended to numerically model the reset transition. The impact of migration parameters and experimental setup on the set/reset characteristics is discussed through numerical simulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Resistive switching in transition metal oxides
Sawa, A. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70119-6 · Cited by 2,948
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Lee, H. Y., Chen, P. S., Wu, T. Y., Chen, Y. S., Wang, C. C., Tzeng, P. J., Lin, C. H., Chen, F., Lien, C. H., & Tsai, M.-J. (2008) · 2008 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2008.4796677 · Cited by 641
Role of Oxygen Vacancies in Cr‐Doped SrTiO3 for Resistance‐Change Memory
Janousch, M., Meijer, G. I., Staub, U., Delley, B., Karg, S. F., & Andreasson, B. P. (2007) · Advanced Materials · doi:10.1002/adma.200602915 · Cited by 530
Filament Conduction and Reset Mechanism in NiO-Based Resistive-Switching Memory (RRAM) Devices
Russo, U., Ielmini, D., Cagli, C., & Lacaita, A. L. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.2010583 · Cited by 361
Self-citationDirect Identification of the Conducting Channels in a Functioning Memristive Device
Strachan, J. P., Pickett, M. D., Yang, J. J., Aloni, S., David Kilcoyne, A. L., Medeiros‐Ribeiro, G., & Stanley Williams, R. (2010) · Advanced Materials · doi:10.1002/adma.201000186 · Cited by 329
Coexistence of Bipolar and Unipolar Resistive Switching Behaviors in a Pt∕TiO[sub 2]∕Pt Stack
Jeong, D. S., Schroeder, H., & Waser, R. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2742989 · Cited by 320
Study of Multilevel Programming in Programmable Metallization Cell (PMC) Memory
Russo, U., Kamalanathan, D., Ielmini, D., Lacaita, A. L., & Kozicki, M. N. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2016019 · Cited by 319
Self-citationKinoshita, K., Tsunoda, K., Sato, Y., Noshiro, H., Yagaki, S., Aoki, M., & Sugiyama, Y. (2008) · Applied Physics Letters · doi:10.1063/1.2959065 · Cited by 271
Compact Modeling of Conducting-Bridge Random-Access Memory (CBRAM)
Yu, S., & Wong, H.-S. P. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2116120 · Cited by 239
Observation of electric-field induced Ni filament channels in polycrystalline NiOx film
Park, G.-S., Li, X.-S., Kim, D.-C., Jung, R.-J., Lee, M.-J., & Seo, S. (2007) · Applied Physics Letters · doi:10.1063/1.2813617 · Cited by 238
Ielmini, D., Nardi, F., & Cagli, C. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254022 · Cited by 230
Self-citationLee, M.-J., Park, Y., Kang, B.-S., Ahn, S.-E., Lee, C., Kim, K., Xianyu, W., Stefanovich, G., Lee, J.-H., Chung, S.-J., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419061 · Cited by 224
Thermochemical resistive switching: materials, mechanisms, and scaling projections
Ielmini, D., Bruchhaus, R., & Waser, R. (2011) · Phase Transitions · doi:10.1080/01411594.2011.561478 · Cited by 192
Self-citationGoux, L., Lisoni, J. G., Jurczak, M., Wouters, D. J., Courtade, L., & Muller, C. (2010) · Journal of Applied Physics · doi:10.1063/1.3275426 · Cited by 187
Resistance-dependent amplitude of random telegraph-signal noise in resistive switching memories
Ielmini, D., Nardi, F., & Cagli, C. (2010) · Applied Physics Letters · doi:10.1063/1.3304167 · Cited by 180
Self-citationWrite Current Reduction in Transition Metal Oxide Based Resistance Change Memory
Ahn, S. ‐., Lee, M. ‐., Park, Y., Kang, B. S., Lee, C. B., Kim, K. H., Seo, S., Suh, D. ‐., Kim, D. ‐., Hur, J., et al. (2008) · Advanced Materials · doi:10.1002/adma.200702081 · Cited by 169
Tsunoda, K., Kinoshita, K., Noshiro, H., Yamazaki, Y., Iizuka, T., Ito, Y., Takahashi, A., Okano, A., Sato, Y., Fukano, T., et al. (2007) · 2007 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2007.4419060 · Cited by 159
Universal Reset Characteristics of Unipolar and Bipolar Metal-Oxide RRAM
Ielmini, D., Nardi, F., & Cagli, C. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2161088 · Cited by 133
Self-citationPark, S.-G., Magyari‐Köpe, B., & Nishi, Y. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2091489 · Cited by 129
Size-Dependent Retention Time in NiO-Based Resistive-Switching Memories
Ielmini, D., Nardi, F., Cagli, C., & Lacaita, A. L. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2040799 · Cited by 122
Self-citationHasan, M., Dong, R., Choi, H., Lee, D. S., Seong, D. J., Pyun, M. B., & Hwang, H. (2008) · Applied Physics Letters · doi:10.1063/1.2932148 · Cited by 121
Resistance transition in metal oxides induced by electronic threshold switching
Ielmini, D., Cagli, C., & Nardi, F. (2009) · Applied Physics Letters · doi:10.1063/1.3081401 · Cited by 121
Self-citationModeling of Set/Reset Operations in NiO-Based Resistive-Switching Memory Devices
Cagli, C., Nardi, F., & Ielmini, D. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2024046 · Cited by 120
Self-citationNardi, F., Ielmini, D., Cagli, C., Spiga, S., Fanciulli, M., Goux, L., & Wouters, D. J. (2010) · Solid-State Electronics · doi:10.1016/j.sse.2010.11.031 · Cited by 111
Self-citationOxide dual-layer memory element for scalable non-volatile cross-point memory technology
Meyer, R., Schloss, L. F., Brewer, J., Lambertson, R., Kinney, W., Sanchez, J., & Rinerson, D. (2008) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmt.2008.4731194 · Cited by 108
Coexistence of unipolar and bipolar resistive switching characteristics in ZnO thin films
Lee, S., Kim, H., Park, J., & Yong, K. (2010) · Journal of Applied Physics · doi:10.1063/1.3489882 · Cited by 99
Lee, J., Shin, J. H., Lee, D., Lee, W., Jung, S., Jo, M., Park, J., Biju, K. P., Kim, S., Park, S., et al. (2010) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2010.5703393 · Cited by 90
Goux, L., Lisoni, J. G., Wang, X., Jurczak, M., & Wouters, D. J. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2028378 · Cited by 88
Effects of RRAM Stack Configuration on Forming Voltage and Current Overshoot
Gilmer, D. C., Bersuker, G. I., Park, H.-Y., Park, C., Butcher, B., Wang, W., Kirsch, P. D., & Jammy, R. (2011) · IEEE International Memory Workshop (IMW) · doi:10.1109/imw.2011.5873225 · Cited by 81
Kamalanathan, D., Russo, U., Ielmini, D., & Kozicki, M. N. (2009) · IEEE Electron Device Letters · doi:10.1109/led.2009.2016991 · Cited by 72
Self-citationAono, M., & Hasegawa, T. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2061830 · Cited by 70
Self-consistent physical modeling of set/reset operations in unipolar resistive-switching memories
Bocquet, M., Deleruyelle, D., Müller, C., & Portal, J. (2011) · Applied Physics Letters · doi:10.1063/1.3605591 · Cited by 68
Parasitic reset in the programming transient of PCMs
Ielmini, D., Mantegazza, D., Lacaita, A. L., et al. (2005) · IEEE Electron Device Letters · doi:10.1109/led.2005.857719 · Cited by 63
Self-citationMemory Devices: Energy–Space–Time Tradeoffs
Zhirnov, V. V., Cavin, R. K., Menzel, S., Linn, E., Schmelzer, S., Bräuhaus, D., Schindler, C., & Waser, R. M. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2064271 · Cited by 59
Investigation of State Stability of Low-Resistance State in Resistive Memory
Park, J., Jo, M., Bourim, E. M., Yoon, J., Seong, D.-J., Lee, J., Lee, W., & Hwang, H. (2010) · IEEE Electron Device Letters · doi:10.1109/led.2010.2042677 · Cited by 57
Resistive switching in Ag-Ge-Se with extremely low write currents
Schindler, C., Meier, M., Waser, R. M., & Kozicki, M. N. (2007) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmt.2007.4389953 · Cited by 57
Accurate analysis of parasitic current overshoot during forming operation in RRAMs
Tirano, S., Perniola, L., Buckley, J., Cluzel, J., Jousseaume, V., Müller, C., Deleruyelle, D., de Salvo, B., & Reimbold, G. (2011) · Microelectronic Engineering · doi:10.1016/j.mee.2011.03.062 · Cited by 40
Resistive switching characteristics of ultra-thin TiOx
Park, J., Jung, S., Lee, J., Lee, W., Kim, S., Shin, J., & Hwang, H. (2011) · Microelectronic Engineering · doi:10.1016/j.mee.2011.03.050 · Cited by 38
Resistive switching in electrochemical metallization memory cells
Schindler, C., & Waser, R. M. (2009) · JuSER (Forschungszentrum Jülich) · Cited by 24
Cited by
In-memory computing with resistive switching devices
Ielmini, D., & Wong, H.-S. P. (2018) · Nature Electronics · doi:10.1038/s41928-018-0092-2 · Cited by 2,298
“…stems from the physics of the device itself, which involves electron drift and capacitive charging in CMOS logic gates, while RRAM relies on the motion of ionic species, which requires a relatively large local electric field and temperature, caused by Joule heating, for their hopping migration 19 .”
BackgroundSelf-citationResistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationConduction Mechanism of Valence Change Resistive Switching Memory: A Survey
Lim, E., & Ismail, R. (2015) · Electronics · doi:10.3390/electronics4030586 · Cited by 829
A comprehensive review on emerging artificial neuromorphic devices
Zhu, J., Zhang, T., Yang, Y., & Huang, R. (2020) · Applied Physics Reviews · doi:10.1063/1.5118217 · Cited by 758
Kim, S., Du, C., Sheridan, P., Ma, W., Choi, S., & Lu, W. D. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00697 · Cited by 603
Metadata
- Authors
- Ielmini, D.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2011-12
- Volume
- 58
- Issue
- 12
- Pages
- 4309-4317
- ISSN
- 0018-9383 (ISSN-L)
- OpenAlex
- W2129871911
- Cited by
- 551
- References
- 42
- FWCI
- 21.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.