Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
The DOI matches its Crossref record; 24 of the 27 references it cites were found in a registry or an index.
Abstract
Passive crossbar resistive random access memory (RRAM) arrays require select devices with nonlinear I-V characteristics to address the sneak-path problem. Here, we present a systematical analysis to evaluate the performance requirements of select devices during the read operation of RRAM arrays for the proposed one-selector-one-resistor (1S1R) configuration with serially connected selector/storage element. We found high selector current density is critical and the selector nonlinearity (ON/OFF) requirement can be relaxed at present. Different read schemes were analyzed to achieve high read margin and low power consumption. Design optimizations of the sense resistance and the storage elements are also discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Inserting a two‐terminal selector in series with the memristor cell can be a viable solution,[ 2 ] but it requires a significant burden in material development and integration processing.”
From Retention Secured Nonlinear and Self-Rectifying Analog Charge Trap Memristor for Energy-Efficient Neuromorphic Hardware (2023) · cites this paper as [2]
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923 · cited 1×
“RESISTIVE memory with two-terminal storage elements is identified as a promising candidate for the nextgeneration nonvolatile memory, due to its inherent 4F2 cell size, sub-10-nm scaling potential, high speed, low power consumption, potential for 3-D integration, and simplicity in fabrication [1], [2].”
BackgroundMemristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885 · cited 1×
“RESISTIVE memory with two-terminal storage elements is identified as a promising candidate for the nextgeneration nonvolatile memory, due to its inherent 4F2 cell size, sub-10-nm scaling potential, high speed, low power consumption, potential for 3-D integration, and simplicity in fabrication [1], [2].”
BackgroundComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Complementary resistive switching in tantalum oxide-based resistive memory devices
Yang, Y., Sheridan, P., & Lu, W. (2012) · Applied Physics Letters · doi:10.1063/1.4719198 · Cited by 224
Self-citationLee, M., Kim, S. I., Lee, C. B., Yin, H., Ahn, S., Kang, B. S., Kim, K. H., Park, J. C., Kim, C. J., Song, I., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801032 · Cited by 217
Self-citationNanoscale resistive memory with intrinsic diode characteristics and long endurance
Kim, K.-H., Hyun Jo, S., Gaba, S., & Lu, W. (2010) · Applied Physics Letters · doi:10.1063/1.3294625 · Cited by 187 · cited 1×
“To date, selectors based on different mechanisms, such as Schottky barriers [6]–[8], tunnel barriers [9], metal–insulator transition [10]–[12], Zener”
BackgroundSelf-citationBipolar Nonlinear $\hbox{Ni/TiO}_{2}\hbox{/}\hbox{Ni}$ Selector for 1S1R Crossbar Array Applications
Huang, J.-J., Tseng, Y.-M., Hsu, C.-W., & Hou, T.-H. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2161601 · Cited by 184
Research works printed but not linked: 4
- cha, 0, Nanoscale (10 nm) 3D vertical ReRAM and ${\rm NbO}&underscore;{2}$ threshold selector with TiN electrode, IEDM Tech Dig, 10.5.1
- 2012, International Technology Roadmap for Semiconductors
- kawahara, 0, An 8 Mb multilayered cross-point ReRAM macro with 443 MB/s write throughput, IEEE ISSCC Tech Dig Papers, 432
- lee, 0, Varistor-type bidirectional switch ( ${\rm JMAX}{>}10^{7}~{\rm A}/{\rm cm}^{2}$ , selectivity $10^{4}$ ) for 3D bipolar resistive memory arrays, Proc VLSI Symp, 37
Cited by
Items 101–200 of 309
Kim, Y., Kwon, Y. J., Kim, J., An, C. H., Park, T., Kwon, D. E., Woo, H. C., Kim, H. J., Yoon, J. H., & Hwang, C. S. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800806 · Cited by 20
In-doped GeSbSeTe thin films for increased memory window of selector-only-memory devices
Jeong, W. H., Jung, J., Jeong, J., Yang, M., & Kim, G. H. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.181079 · Cited by 23
Self-Compliant Bipolar Resistive Switching in SiN-Based Resistive Switching Memory
Kim, S., Chang, Y., Kim, M., Kim, T., Kim, Y., & Park, B. (2017) · Materials · doi:10.3390/ma10050459 · Cited by 20
Extension of Two-Port Sneak Current Cancellation Scheme to 3-D Vertical RRAM Crossbar Array
Bae, W., Yoon, K. J., Hwang, C. S., & Jeong, D.-K. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2664863 · Cited by 15
“In conventional floating readout scheme, all the unselected word-lines and bit-lines are floated in order to minimize the power consumption [6].”
BackgroundMa, Z., Wang, F., Shan, X., Lin, X., Zhang, Y., Guo, X., Liu, W., Han, Y., Zhao, X., Song, Z., et al. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3268253 · Cited by 18
Disturbance Characteristics of 1T DRAM Arrays Consisting of Feedback Field-Effect Transistors
Jeon, J., Cho, K., & Kim, S. (2023) · Micromachines · doi:10.3390/mi14061138 · Cited by 18
“For example, the resistive random-access memory (RRAM) requires a selector for a crossbar array owing to the sneak path [26].”
BackgroundResistive switching properties for fluorine doped titania fabricated using atomic layer deposition
Kim, M., Wang, Y., Kim, D., Shao, Q., Lee, H., & Park, H. (2022) · APL Materials · doi:10.1063/5.0076669 · Cited by 16
Mu, C., Huang, Z., Jiang, H., Liao, J., Zhou, Y. L., Chen, L., Zhang, Y., Zhu, H., Yang, J., Liu, Q., et al. (2025) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2025.3577335 · Cited by 19
“While batch reuse techniques have been employed in prior designs to hide the latency during inference [20], these methods cannot be directly applied to training hardware.”
Modeling and Simulation of Resistive Random Access Memory With Graphene Electrode
Xie, H., Chen, W., Zhang, S., Zhu, G., Khaliq, A., Hu, J. X., & Yin, W. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.2965182 · Cited by 16
Mimicking biological synaptic plasticity with a leaky charge-trap FinFET
Yu, J., Han, J., & Choi, Y. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc01713j · Cited by 15
Feng, Y., Zhang, D., Zhao, G., Sun, Z. H., Bai, M., Qi, Y., Gong, X., Liu, J., Zhang, J., Wu, J., et al. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3227529 · Cited by 14
“For example, the sneak path leakage and the interconnect series resistance diminish the read margin of resistive random access memory (RRAM) and limit the maximum array size [7].”
BackgroundOn the origin of resistive switching volatility in Ni/TiO2/Ni stacks
Cortese, S., Trapatseli, M., Khiat, A., & Prodromakis, T. (2016) · Journal of Applied Physics · doi:10.1063/1.4960690 · Cited by 16
Woo, J., & Yu, S. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2821093 · Cited by 14
“In this constructed array framework, half bias scheme is applied [18].”
MethodBae, W., & Yoon, K. J. (2020) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2020.3006114 · Cited by 14
“Several write/read margin analyses for memristor CBAs have been reported, however, none of them takes into account the noise generation of the memristor [13]–[16].”
BackgroundTang, Z., Wang, Y., Chi, Y., & Fang, L. (2018) · Electronics · doi:10.3390/electronics7100224 · Cited by 14
Dynamic Computing in Memory (DCIM) in Resistive Crossbar Arrays
Motaman, S., & Ghosh, S. (2018) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2018.00036 · Cited by 15
“V. IMPLEMENTATION OF CARRY SELECT ADDER USING DCIM In order to perform addition, carry select adder is implemented.”
BackgroundMethodInfluentialProcessing-in-Memory Technology for Machine Learning: From Basic to ASIC
Taylor, B., Zheng, Q., Li, Z., Li, S., & Chen, Y. (2022) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2022.3168404 · Cited by 14
A new bias scheme for a low power consumption ReRAM crossbar array
Sun, W., Choi, S., & Shin, H. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/8/085009 · Cited by 13
Improved rectification characteristics by engineering energy barrier height in TiOx-based RRAM
Kim, T., Kim, S., & Park, B. (2020) · Microelectronic Engineering · doi:10.1016/j.mee.2020.111498 · Cited by 13
Chen, Z., Zhao, X., Bengel, C., Liu, F., Li, K., Menzel, S., & Du, N. (2024) · Scientific Reports · doi:10.1038/s41598-024-74667-z · Cited by 20
“Compared to other simulation-based studies utilizing memristor models, which often focus on only one or two relevant parameters 25,27–29 , our study provides a more comprehensive examination.”
BackgroundA Study of the Electroforming Process in 1T1R Memory Arrays
Son, S., Torre, C. L., Kindsmüller, A., et al. (2022) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2022.3175947 · Cited by 12
“Each array unit consists of a memristive VCM cells (1R), and a select transistor (1T) to prevent unintended sneak path currents and half-select issues [28].”
BackgroundA Comprehensive Review on Physical Unclonable Functions Based on Resistive Random Access Memory
Zahoor, F., Bature, U. I., Nisar, A., Alzahrani, A., Abbas, H., & Bashir, F. I. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c00504 · Cited by 12
Shen, Z., Shen, J., Sheng, H., Kang, L., Zeng, Z., Chen, W., Li, A., & Zhao, C. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202531922 · Cited by 17
“…the core physical mechanism of the 1S1R strategy is to utilize the nonlinear current-voltage characteristics of the selector for threshold determination, ensuring that the entire series path is only conductive when a sufficient voltage (reaching the threshold) is applied to the target cell [67].”
Sung, C., Lim, S., & Hwang, H. (2020) · IEEE Electron Device Letters · doi:10.1109/led.2020.2979236 · Cited by 11
“important for low-power and disturbance problems during read or write operations [3], [4].”
BackgroundAsymmetric-Structure-Induced Self-Rectifying in Nanoscale HfO2-Based RRAM Array
Zhang, X., Ji, H., & Jiang, R. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2924038 · Cited by 12
“In order to conquer this issue, it usually adds a selector, such as a transistor at each crosspoint of array [8]–[11].”
BackgroundNew Insights of the Switching Process in GeAsTe Ovonic Threshold Switching (OTS) Selectors
Hu, Z., Zhang, W., Degraeve, R., et al. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3231233 · Cited by 10
“SELECTOR device plays a key role in suppressing the sneak path currents in the crossbar arrays that utilize the emerging nonvolatile memory devices [1], [2], such as the phase change memory (PCRAM) [3] and the redox-based and oxide-based resistive switching memory (ReRAM/OxRAM) [4].”
BackgroundSwitchable Cu 2 O/WO x p–n junction for high density crossbar arrays
Duan, W., Wang, J., Zhong, X. L., Song, H., & Li, B. (2016) · RSC Advances · doi:10.1039/c6ra16999f · Cited by 10
Jang, D., & Kwon, M.-W. (2023) · Electronics · doi:10.3390/electronics12224650 · Cited by 9
Non-Volatile Memory Technology for Data Age
Ishimaru, K. (2018) · IEEE International Conference on Solid-State and Integrated Circuit Technology · doi:10.1109/icsict.2018.8564815 · Cited by 9
“High non-linearity factor (NLF) of cell or combination with selector device is required [6] and is challenging at this moment.”
BackgroundVelázquez-Rodríguez, J. L., Villuendas-Rey, Y., Camacho-Nieto, O., & Yáñez-Márquéz, C. (2020) · Mathematics · doi:10.3390/math8050732 · Cited by 9
“This strange procedure exists and has a technical name: it is called resubstitution error [51].”
BackgroundHighly Reliable Ovonic Threshold Switch with TiN/GeTe/TiN Structure
Seong, D.-J., Lee, S. Y., Seo, H. K., Kim, J.-W., Park, M., & Yang, M. (2023) · Materials · doi:10.3390/ma16052066 · Cited by 11
Lim, H., Sun, W., & Shin, H. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2506598 · Cited by 10
“Many studies have investigated the characteristics of a crossbar array, such as the operating margin, power consumption, and the bias conditions [2]–[6].”
BackgroundCompensating for sneak currents in multi-level crosspoint resistive memories
Luo, T., Milenković, O., & Peleato, B. (2015) · Asilomar Conference on Signals, Systems and Computers (ACSSC) · doi:10.1109/acssc.2015.7421253 · Cited by 8
“Two of the most popular biasings are Vw = Vb = 0 (groundground) and Vw = Vb = Vsw/2 (half-biasing) [8].”
BackgroundInvestigation of Set/Reset Operations in CMOS-Logic-Compatible Contact Backfilled RRAMs
Chen, H., Chen, H. H., King, Y., & Lin, C. J. (2016) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2016.2582211 · Cited by 9
“Cell structures such as 1T1R [18]–[20], 1D1R [21]–[23], 1S1R [24]–[26], and CRS units [27]–[29] were investigated and demonstrated by many researchers for the development of”
BackgroundDirected Assembly of Nanoparticle Threshold‐Selector Arrays
Speckbacher, M., Rinderle, M., Kaiser, W., Osman, E. A., Chryssikos, D., Cattani‐Scholz, A., Gibbs, J. M., Gagliardi, A., & Tornow, M. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900098 · Cited by 8
A dual-functional Ta/TaO x /Ru device with both nonlinear selector and resistive switching behaviors
Wang, R., Shi, T., Zhang, X., Wu, Z., & Liu, Q. (2021) · RSC Advances · doi:10.1039/d1ra02350k · Cited by 10
Demonstration of β-Ga2O3 nonvolatile flash memory for oxide electronics
Khandelwal, V., Rajbhar, M. K., García, G. I. M., Tang, X. L., Sarkar, B., & Li, X. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acdbf3 · Cited by 10
An approximate condition to avoid reverse leakage current in ReRAM crossbar design
Youn, Y., Sim, J., Park, H.-J., et al. (2015) · International SoC Design Conference · doi:10.1109/isocc.2015.7401656 · Cited by 8
Zokaee, F., & Jiang, L. (2020) · IEEE International Symposium on High-Performance Computer Architecture (HPCA) · doi:10.1109/hpca47549.2020.00031 · Cited by 8
“A read in a CP array drives the selected WL to V a = V dd and senses the current change on the selected BL ( V b = V bl ) [24].”
BackgroundKim, T.-H., Song, B., Jung, I.-J., & Jung, S. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3133945 · Cited by 8
Ding, Y., An, J., Shen, J., Jia, S., Guo, J., Wang, L., Gong, T., Jiang, P., Wang, Y., Chen, Y., et al. (2022) · Advanced Electronic Materials · doi:10.1002/aelm.202200870 · Cited by 7
Switching Time and Stability Evaluation for Writing Operation of STT-MRAM Crossbar Array
Lim, H., Lee, S., & Shin, H. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2597195 · Cited by 7
“To consider the worst case scenario, a simulation was conducted for the write (switching) operation of a selected cell, which was located at the farthest corner from the driving transistors [13].”
MethodAssessing the Performance of Stateful Logic in 1-Selector-1-RRAM Crossbar Arrays
Tyagi, A., & Kvatinsky, S. (2024) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas58744.2024.10558539 · Cited by 6
“For readout margin, we apply a V READ voltage of 2 V at the selected bitline and connected the selected wordline to R SENSE = √ R LRS × R HRS = 100 k Ω [15].”
BackgroundMethodInfluentialFeng, Y., Sun, Z., Wang, C., Guo, X., Mei, J., Qi, Y., Liu, J., Zhang, J., Wu, J., Zhan, X., et al. (2024) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2024.3515146 · Cited by 7
Bhardwaj, K., Paasio, E., & Majumdar, S. (2025) · Advanced Intelligent Discovery · doi:10.1002/aidi.202500143 · Cited by 7
Kim, Y., Kim, H., Jeon, S., Kim, H. W., Hong, E., Kim, N., Choi, H., Park, H., Jeong, J., Lee, D., et al. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3408784 · Cited by 8
“This resulted in limited simulation studies on the configuration of one-selector and one-RRAM for synaptic elements [26], [27].”
BackgroundCoupling-Free Readout Scheme for Memcapacitors With NAND Flash Structure
Ahn, S., Yu, J., Hwang, H., Song, M. S., Yu, D., Hwang, S., Chung, I.-Y., Choi, W. Y., & Kim, H. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3418289 · Cited by 6
“However, memristor devices come with limitations, such as IR drop caused by line resistance and VMM accuracy degradation due to sneak path currents, necessitating additional selection components, such as selectors and transistors [27], [28], [29], [30].”
BackgroundExploiting In-Memory Data Patterns for Performance Improvement on Crossbar Resistive Memory
Wen, W., Zhao, L., Zhang, Y., & Yang, J. (2019) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2019.2940685 · Cited by 6
“However, ReRAM crossbars suffer from large sneaky currents [13], [17], [28]–[30].”
BackgroundResearch on Improving the Working Current of NbOx-Based Selector by Inserting a Ti Layer
Liu, C., Ma, G., Zeng, J., et al. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.716065 · Cited by 6
“The stability of selectivity could inhibit the sneak path current more effectively in crossbar arrays (Zhou et al., 2014).”
BackgroundIntegration of ZnO-Based Resistive-Switching Memory and Ge2Sb2Te5-Based Phase-Change Memory
Chen, C.-Y., Feng, Y.-H., Lu, H., Chang, F.-E., & Chen, J.-Y. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c00064 · Cited by 6
Investigation on the Worst Read Scenario of a ReRAM Crossbar Array
Youn, Y., Kim, K., Sim, J., Park, H.-J., & Kim, B. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2710140 · Cited by 6
“operating condition [7], [9].”
Self-citationXBarNet: Computationally Efficient Memristor Crossbar Model Using Convolutional Autoencoder
Zhang, Y., He, G., Wang, G., & Li, Y. (2022) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2022.3163895 · Cited by 6
“A higher β is desired since it suppresses the sneaky-path current from unselected memristors [15].”
BackgroundInfluentialApplications of Resistive Switching Memory as Hardware Security Primitive
Carboni, R., & Ielmini, D. (2019) · Springer series in advanced microelectronics · doi:10.1007/978-981-13-8379-3_4 · Cited by 11
“The current sneak path is then exploited to go beyond the typical limitation of memory-based PUF, which have a limited set of CRPs. Note that for memory applications the sneak path effect is detrimental for cell read-out margin [88].”
Wang, C., Feng, D., Tong, W., Liu, J., Wu, B., Zhao, W. J., & Zhang, Y. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2945058 · Cited by 7
“nonlinearity and state resistance variation degrade the read margin [1]–[4].”
BackgroundWoo, J. S., Jung, C. L., Chang, J. H., Ryu, M., & Choi, W. Y. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202400606 · Cited by 5
Improving Reliability of 1 Selector-1 ReRAM Crossbar Arrays Through Hybrid Switching Methods
Seo, H. K., & Yang, M. K. (2025) · Materials · doi:10.3390/ma18040761 · Cited by 5
“Device reliability is also a significant concern, as repeated switching cycles can lead to material degradation and performance variability [1–3].”
Influence of selector-introduced compliance current on HfOx RRAM switching operation
Fang, Y., Cai, Y., Wang, Z., et al. (2015) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2015.7457474 · Cited by 5
“The impact of selectors on the read operation in RRAM array has been extensively studied in literatures [4-6].”
BackgroundPan, C., & Naeemi, A. (2018) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2018.2848844 · Cited by 5
“Many studies have investigated the required selector properties for the read and write operations [20]–[23].”
BackgroundGarcía, H., Domínguez, L. A., Castán, H., et al. (2019) · Microelectronic Engineering · doi:10.1016/j.mee.2019.111083 · Cited by 5
Zhang, L., Borggreve, D., Vanselow, F., & Brederlow, R. (2020) · International Conference on Modern Circuits and Systems Technologies · doi:10.1109/mocast49295.2020.9200280 · Cited by 5
“Output current can be written as the product of the matrix-vector multiplication of the conductance matrix G and input voltage vector by neglecting the sneak-path problem [14] and the floating voltage at the output (Eq.”
BackgroundAnalysis of Leakage Current of HfO2/TaOx-Based 3-D Vertical Resistive Random Access Memory Array
Chen, Z., Song, R., Huo, Q., Ren, Q., Zhang, C., Li, L., & Zhang, F. (2021) · Micromachines · doi:10.3390/mi12060614 · Cited by 6
Midya, R., Wang, Z., Rao, M., Upadhyay, N. K., & Yang, J. J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102584-0.00015-2 · Cited by 7
Li, H., & Chen, W. (2020) · Journal of Applied Physics · doi:10.1063/1.5134916 · Cited by 5
Cho, M. G., Jeon, S., Kim, H., Park, J. H., Eom, T., & Choi, B. J. (2025) · Journal of Materials Chemistry C · doi:10.1039/d5tc02138c · Cited by 4
Realization of Outstanding Stable 1S1R Behavior Based on Al-Doped NbOx
Yang, G., Chen, A., Liu, N., Ma, G., Lin, Z., Fu, Y., Zhao, X., Rao, Y., Li, T., Wan, H., et al. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3224093 · Cited by 4
“However, these architectures aimed to improve the density of resistive random access memory (RRAM) are facing the sneak path current issue in arrays, which causes information misreading and affects other performances seriously [1].”
BackgroundInvestigation of power dissipation for ReRAM in crossbar array architecture
Sun, W., Lim, H., Shin, H., & Lee, W. (2014) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2014.7060847 · Cited by 4
“The unselected cell is also all low-resistance state or on state, and selected cell is high-resistance state or off state [5].”
BackgroundRecent progress in RRAM technology: From compact models to applications
Zha, Y., Wei, Z., & Li, J. (2017) · China Semiconductor Technology International Conference (CSTIC) · doi:10.1109/cstic.2017.7919731 · Cited by 5
Pulsed chemical vapor deposition of conformal GeSe for application as an OTS selector
Ali, H., Deng, S., Devulder, W., et al. (2021) · Materials Advances · doi:10.1039/d0ma01014f · Cited by 4
High Driving Current Selector Based on As-Implanted HfO2 Thin Film for 3D Phase Change Memory
Wang, R., Guo, T., Yao, D., et al. (2021) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.1c00980 · Cited by 4
Peripheral Circuit Design Considerations of Neuro-inspired Architectures
Kadetotad, D. V., Chen, P.-Y., Cao, Y. K., Yu, S., & Seo, J.-S. (2017) · Springer eBooks · doi:10.1007/978-3-319-54313-0_9 · Cited by 5
Youn, S., Hwang, H., & Kim, H. (2025) · Advanced Intelligent Systems · doi:10.1002/aisy.202500817 · Cited by 8
Designing a differential 3R-2bit RRAM cell for enhancing read margin in cross-point RRAM arrays
Nakhkash, M., Bardareh, H., Zokaee, F., & Zarandi, H. R. (2017) · IEEE Nordic Circuits and Systems Conference (NorCAS) · doi:10.1109/norchip.2017.8124954 · Cited by 3
“1: Sneak leakage current in cross-point array architecture [5], [6].”
BackgroundInfluentialKim, K., Kang, S., Sim, J., Park, H.-J., & Kim, B. (2018) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2018.2855959 · Cited by 3
“COMPARISONS OF THE SIZES OF THE SEARCH SPACES EXPLORED BY VARIOUS APPROACHES [4], [6]–[8], AND THIS PAPER”
BackgroundMethodResultInfluentialSelf-citationPostdeposition annealing on VO2 films for resistive random-access memory selection devices
Lim, H., Cho, H., Kim, H., Lee, N., Shin, S., Jung, C., Kim, H., Lim, K., & Jeon, H. (2018) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.5021082 · Cited by 3
Ge-based non-volatile memories
Wei, N., Zhang, Y., Chen, B., & Zhao, Y. (2020) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ab8e20 · Cited by 3
Analog Computation with RRAM and Supporting Circuits
Correll, J. M., Lee, S. H., Cai, F., Bothra, V., Lim, Y., Zhang, Z., Lu, W. D., & Flynn, M. P. (2022) · Springer eBooks · doi:10.1007/978-3-030-91741-8_2 · Cited by 4
Self-citationImproved Resistive Switching Characteristics and Synaptic Functions of InZnO/SiO2 Bilayer Device
Ju, D., Koo, M., & Kim, S. (2023) · Materials · doi:10.3390/ma16237324 · Cited by 3
“Furthermore, several structures expandable to high density, such as 3D vertical structures and array structures, are easy to use due to their simple metal–insulator–metal structures [20–27].”
BackgroundImproving Multilevel Writes on Vertical 3-D Cross-Point Resistive Memory
Wang, C., Feng, D., Tong, W., Hua, Y., Liu, J., Wu, B., Zhao, W. J., Song, L., Zhang, Y., Xu, J., et al. (2020) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2020.3006188 · Cited by 5
A Multi-Driver Write Scheme for Reliable and Energy Efficient 1S1R ReRAM Crossbar Arrays
Amer, S., & Rose, G. S. (2019) · International Symposium on Quality Electronic Design (ISQED) · doi:10.1109/isqed.2019.8697361 · Cited by 3
“Several Read/Write schemes have been proposed in the literature to ensure efficient and reliable operation of 1S1R arrays [3] and [4].”
BackgroundComparative Study of Selector Device Design for Sneak Current in 3D Crosspoint ReRAM
Dilna, U., & Prasad, S. N. (2020) · International Conference on Multimedia Processing, Communication & Information Technology (MPCIT) · doi:10.1109/mpcit51588.2020.9350434 · Cited by 4
“The requirement of selector device during the read operation was given by Jiantao Zhou et al. [10].”
MethodPark, J. Y., Yoo, S., Park, B., et al. (2021) · Nano Research · doi:10.1007/s12274-020-3185-y · Cited by 3
Electronic threshold switching of As-embedded SiO2 selectors: charged oxygen vacancy model
Kim, H. R., Seok, T. J., Ha, T. J., Song, J. H., Dae, K. S., Lee, S. G., Choi, H. S., Park, S., Choi, B. J., Jang, J. H., et al. (2025) · Nano Convergence · doi:10.1186/s40580-025-00480-7 · Cited by 2
Selector-only memory in Si-doped GeSeTe chalcogenide with superior endurance and memory window
Kim, N. E., Yang, M., & Kim, G. Y. (2026) · Journal of Materials Chemistry C · doi:10.1039/d6tc00505e · Cited by 3
Cheng, C., Liu, K., Dang, B., Xu, L., Yang, Z., Yan, X., Yang, Y., & Huang, R. (2021) · IEEE Electron Devices Technology & Manufacturing Conference (EDTM) · doi:10.1109/edtm50988.2021.9421007 · Cited by 2
“Introduction As the size of the memristor continues to shrink and the scale of the array continues to expand, the sneak current in the crossbar array is becoming a critical issue for integration, which could lead to wrong readout and high energy consumption [1-3].”
BackgroundRead margin analysis of crossbar arrays using the cell-variability-aware simulation method
Sun, W., Choi, S., & Shin, H. (2017) · Solid-State Electronics · doi:10.1016/j.sse.2017.10.016 · Cited by 2
Memristive Computing Devices and Applications
Zidan, M. A., Chen, A., Indiveri, G., & Lu, W. D. (2021) · Kluwer international series in electronic materials: science and technology · doi:10.1007/978-3-030-42424-4_2 · Cited by 2
Self-citationXie, H., Hu, J. X., Wang, Z., et al. (2022) · Micromachines · doi:10.3390/mi13020266 · Cited by 2
Pre-Emphasis Pulse Design for Reducing Bit-Line Access Time in NAND Flash Memory
Kondo, J., & Tanzawa, T. (2022) · Electronics · doi:10.3390/electronics11131926 · Cited by 2
Effect of OTS Selector Reliabilities on NVM Crossbar-based Neuromorphic Training
Ma, W., Hoang, T. T., Hoskins, B. D., et al. (2022) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/irps48227.2022.9764456 · Cited by 2
“Crossbars with passive NVM devices can exhibit problems such as sneak paths and leakage currents [3], which can be problematic when accurate single cell operation is required.”
BackgroundFlash-Based Computing-in-Memory Architecture to Implement High-Precision Sparse Coding
Qi, Y., Feng, Y., Wang, H., Wang, C., Bai, M., Liu, J., Zhan, X., Wu, J., Wang, Q., & Chen, J. (2023) · Micromachines · doi:10.3390/mi14122190 · Cited by 1
“Additionally, the data have to be divided into small slices [18,19].”
BackgroundNanoscale memristive devices: Threats and solutions
Hajisadeghi, A. M., Talafy, J., & Zarandi, H. R. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-90793-4.00008-8 · Cited by 1
“Thanks to the high resistance ratio of ReRAM, the resistance window between the two intermediate levels is large enough to have an MLC design [16].”
Fedotov, M. I., Korotitsky, V. I., & Koveshnikov, S. (2024) · Nanomaterials · doi:10.3390/nano14080668 · Cited by 2
Chen, Y., Lin, C., Lin, C., & Lin, C.-H. (2025) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/adc3c1 · Cited by 1
Optimizing TiO2/HfO2 Multilayer RRAM for Self-Rectifying Characteristics
Nam, C.-H., & Baek, M.-H. (2025) · Micromachines · doi:10.3390/mi17010049 · Cited by 1
“To mitigate reverse currents, researchers have explored integrating additional components such as transistors or diodes into RRAM cells to create configurations like 1-Transistor-1-Resistor (1T1R) and 1-Diode-1-Resistor (1D1R) [3,4].”
An analysis of the read margin and power consumption of crossbar ReRAM arrays
Choi, S., Sun, W., Lim, H., & Shin, H. (2015) · IEEE Region 10 Conference (TENCON) · doi:10.1109/tencon.2015.7372853 · Cited by 1
“2 shows the I-V characteristics of the 1S1R memory cell and the selector device (1S) modeled by the following hyperbolic function [5]:”
BackgroundSun, W., Choi, S., Lim, H., & Shin, H. (2016) · Japanese Journal of Applied Physics · doi:10.7567/jjap.55.04ee10 · Cited by 1
A New One-selector One-resistor Verilog-A model for Circuit Simulsation
Dai, Y., Qi, M., Tao, F., et al. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/790/1/012122 · Cited by 1
“The specific writing operation with respect to voltage delivery, current delivery, and power consumption in 1S1R cross-point array has also been analyzed [2].”
BackgroundMethodInfluentialSelf-citationAn Optimum Structure of Scalable Capacitors in 3D Crosspoint Memory Technology
Tone, Y., & Tanzawa, T. (2021) · Electronics · doi:10.3390/electronics10222755 · Cited by 1
A Novel Resistive Memory-based Process-in-memory Architecture for Efficient Logic and Add Operations
Li, T., Wang, Q., Zhu, Y., Jiang, J., He, G., Jin, J., Mao, Z., & Jing, N. (2019) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3306495 · Cited by 1
“Typically, RM is set as 10% for a distinguishable read [59].”
BackgroundMulti-Bit Read and Write Methodologies for Diode-MTJ Crossbar Array
Khan, M. N. I., & Ghosh, S. (2020) · International Symposium on Quality Electronic Design (ISQED) · doi:10.1109/isqed48828.2020.9137015 · Cited by 1
“Several emerging Non-Volatile Memory (NVM) technologies have been proposed for crossbar array [6-9].”
Background
Metadata
- Authors
- Zhou, J., Kim, K.-H., & Lu, W.
- Affiliations
- University of Michigan (US)
- Commissariat à l'Énergie Atomique et aux Énergies Alternatives (FR)
- ORCID
- Wei Lu
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2014-05
- Volume
- 61
- Issue
- 5
- Pages
- 1369-1376
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W4253860821
- Cited by
- 310
- References
- 27
- Citations by year
- 2026: 11 · 2025: 14 · 2024: 10 · 2023: 16 · 2022: 22 · 2021: 25 · 2020: 109 · 2019: 24 · 2018: 18 · 2017: 25 · 2016: 16 · 2015: 18 · 2014: 2
- FWCI
- 10.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Keywords
- resistive random access memory, crossbar arrays, selector devices, read operation, read margin, low power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.