Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
The DOI matches its Crossref record; 24 of the 27 references it cites were found in a registry or an index.
Abstract
Passive crossbar resistive random access memory (RRAM) arrays require select devices with nonlinear I-V characteristics to address the sneak-path problem. Here, we present a systematical analysis to evaluate the performance requirements of select devices during the read operation of RRAM arrays for the proposed one-selector-one-resistor (1S1R) configuration with serially connected selector/storage element. We found high selector current density is critical and the selector nonlinearity (ON/OFF) requirement can be relaxed at present. Different read schemes were analyzed to achieve high read margin and low power consumption. Design optimizations of the sense resistance and the storage elements are also discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Inserting a two‐terminal selector in series with the memristor cell can be a viable solution,[ 2 ] but it requires a significant burden in material development and integration processing.”
From Retention Secured Nonlinear and Self-Rectifying Analog Charge Trap Memristor for Energy-Efficient Neuromorphic Hardware (2023) · cites this paper as [2]
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923 · cited 1×
“RESISTIVE memory with two-terminal storage elements is identified as a promising candidate for the nextgeneration nonvolatile memory, due to its inherent 4F2 cell size, sub-10-nm scaling potential, high speed, low power consumption, potential for 3-D integration, and simplicity in fabrication [1], [2].”
BackgroundMemristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885 · cited 1×
“RESISTIVE memory with two-terminal storage elements is identified as a promising candidate for the nextgeneration nonvolatile memory, due to its inherent 4F2 cell size, sub-10-nm scaling potential, high speed, low power consumption, potential for 3-D integration, and simplicity in fabrication [1], [2].”
BackgroundComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Complementary resistive switching in tantalum oxide-based resistive memory devices
Yang, Y., Sheridan, P., & Lu, W. (2012) · Applied Physics Letters · doi:10.1063/1.4719198 · Cited by 224
Self-citationLee, M., Kim, S. I., Lee, C. B., Yin, H., Ahn, S., Kang, B. S., Kim, K. H., Park, J. C., Kim, C. J., Song, I., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801032 · Cited by 217
Self-citationNanoscale resistive memory with intrinsic diode characteristics and long endurance
Kim, K.-H., Hyun Jo, S., Gaba, S., & Lu, W. (2010) · Applied Physics Letters · doi:10.1063/1.3294625 · Cited by 187 · cited 1×
“To date, selectors based on different mechanisms, such as Schottky barriers [6]–[8], tunnel barriers [9], metal–insulator transition [10]–[12], Zener”
BackgroundSelf-citationBipolar Nonlinear $\hbox{Ni/TiO}_{2}\hbox{/}\hbox{Ni}$ Selector for 1S1R Crossbar Array Applications
Huang, J.-J., Tseng, Y.-M., Hsu, C.-W., & Hou, T.-H. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2161601 · Cited by 184
Research works printed but not linked: 4
- cha, 0, Nanoscale (10 nm) 3D vertical ReRAM and ${\rm NbO}&underscore;{2}$ threshold selector with TiN electrode, IEDM Tech Dig, 10.5.1
- 2012, International Technology Roadmap for Semiconductors
- kawahara, 0, An 8 Mb multilayered cross-point ReRAM macro with 443 MB/s write throughput, IEEE ISSCC Tech Dig Papers, 432
- lee, 0, Varistor-type bidirectional switch ( ${\rm JMAX}{>}10^{7}~{\rm A}/{\rm cm}^{2}$ , selectivity $10^{4}$ ) for 3D bipolar resistive memory arrays, Proc VLSI Symp, 37
Cited by
The future of electronics based on memristive systems
Zidan, M. A., Strachan, J. P., & Lu, W. D. (2018) · Nature Electronics · doi:10.1038/s41928-017-0006-8 · Cited by 2,138
“This problem can be addressed by engineering devices to have high current–voltage nonlinearities 15 , by adding a selector device to the memory cell 16,17 or through system-level techniques to compensate for the read current distortion 14 .”
BackgroundSelf-citationResistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Anatomy of Ag/Hafnia‐Based Selectors with 1010 Nonlinearity
Midya, R., Wang, Z., Zhang, J., Savel'ev, S. E., Li, C., Rao, M., Jang, M. H., Joshi, S., Jiang, H., Lin, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604457 · Cited by 379
Compact Modeling of RRAM Devices and Its Applications in 1T1R and 1S1R Array Design
Chen, P.-Y., & Yu, S. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2492421 · Cited by 364
Threshold Switching of Ag or Cu in Dielectrics: Materials, Mechanism, and Applications
Wang, Z., Rao, M., Midya, R., Joshi, S., Jiang, H., Lin, P., Song, W., Asapu, S., Zhuo, Y., Li, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704862 · Cited by 360
A highly CMOS compatible hafnia-based ferroelectric diode
Luo, Q., Cheng, Y., Yang, J., Cao, R., Ma, H., Yang, Y., Huang, R., Wei, W., Zheng, Y., Gong, T., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15159-2 · Cited by 311
All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration
Sivan, M., Li, Y., Veluri, H., Zhao, Y., Tang, B., Wang, X., Zamburg, E., Leong, J. F., Niu, J. X., Chand, U., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-13176-4 · Cited by 209
Memristive Crossbar Arrays for Storage and Computing Applications
Li, H., Wang, S., Zhang, X., Wang, W., Yang, R., Sun, Z., Feng, W., Lin, P., Wang, Z., Sun, L., et al. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202100017 · Cited by 205
On‐Demand Reconfiguration of Nanomaterials: When Electronics Meets Ionics
Lee, J., & Lu, W. D. (2018) · Advanced Materials · doi:10.1002/adma.201702770 · Cited by 199
Self-citationVariability in Resistive Memories
Roldán, J. B., Miranda, E., Maldonado, D., Mikhaylov, A. N., Agudov, N. V., Dubkov, A. A., Koryazhkina, M. N., González, M. B., Villena, M. A., Poblador, S., et al. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200338 · Cited by 197
Pathways to efficient neuromorphic computing with non-volatile memory technologies
Chakraborty, I., Jaiswal, A., Saha, A. K., Gupta, S. K., & Roy, K. (2020) · Applied Physics Reviews · doi:10.1063/1.5113536 · Cited by 168
Seo, S., Lee, J.-J., Lee, H.-J., Lee, H. W., Oh, S., Lee, J. J., Heo, K., & Park, J.-H. (2020) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00694 · Cited by 161
Ultrahigh drive current and large selectivity in GeS selector
Jia, S., Li, H., Gotoh, T., Longeaud, C., Zhang, B., Lyu, J., Lv, S., Zhu, M., Song, Z., Liu, Q., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-18382-z · Cited by 161
Stochastic Memory Devices for Security and Computing
Carboni, R., & Ielmini, D. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900198 · Cited by 145
Realization of Boolean Logic Functionality Using Redox‐Based Memristive Devices
Siemon, A., Breuer, T., Aslam, N., Ferch, S., Kim, W., van den Hurk, J., Rana, V., Hoffmann‐Eifert, S., Waser, R. M., Menzel, S., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500865 · Cited by 146
The challenges of modern computing and new opportunities for optics
Li, C., Zhang, X., Li, J., Fang, T., & Dong, X. (2021) · PhotoniX · doi:10.1186/s43074-021-00042-0 · Cited by 152
“These architectures are similar to the systolic array in Google’s TPU (tensor processing unit) and ‘crossbar’ design in the computing-in-memory field [43].”
MethodInterfacial Metal–Oxide Interactions in Resistive Switching Memories
Cho, D.-Y., Luebben, M., Wiefels, S., Lee, K.-S., & Valov, I. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02921 · Cited by 129
Very Low-Programming-Current RRAM With Self-Rectifying Characteristics
Zhou, J., Cai, F., Wang, Q., Chen, B., Gaba, S., & Lu, W. D. (2016) · IEEE Electron Device Letters · doi:10.1109/led.2016.2530942 · Cited by 122
“However, a bottleneck for selector development is the high current-density requirement to minimize the voltage divider effect with the RRAM element, and allow sufficient read/write margin for the array operation [11].”
BackgroundSelf-citationTrilayer Tunnel Selectors for Memristor Memory Cells
Choi, B. J., Zhang, J., Norris, K., Gibson, G., Kim, K. M., Jackson, W., Zhang, M. M., Li, Z., Yang, J. J., & Williams, R. S. (2016) · Advanced Materials · doi:10.1002/adma.201503604 · Cited by 120
Self-citationWrite Disturb in Ferroelectric FETs and Its Implication for 1T-FeFET AND Memory Arrays
Ni, K., Li, X., Smith, J. A., et al. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2872347 · Cited by 118
“It is important to note that, unlike a passive crossbar array [20], the cumulative leakage currents of all unaccessed FeFETs can be further suppressed by applying a negative VG, such that the array size N can be significantly increased.”
BackgroundParasitic Effect Analysis in Memristor-Array-Based Neuromorphic Systems
Jeong, Y., Zidan, M. A., & Lu, W. D. (2018) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2017.2784364 · Cited by 115
“line resistance Rline can be up to 10 for nanoscale devices [19], [21], [40]–[44].”
BackgroundSelf-citationA $\mu $ -Controller-Based System for Interfacing Selectorless RRAM Crossbar Arrays
Berdan, R., Serb, A., Khiat, A., Regoutz, A., Papavassiliou, C., & Prodromakis, T. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2433676 · Cited by 102
“Some of the most popular such schemes are described in [20, Sec.”
MethodMemristive Devices and Networks for Brain‐Inspired Computing
Zhang, T., Ke, Y., Xu, X., Cai, Y., Yang, Y., & Huang, R. (2019) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201900029 · Cited by 95
REFLECTION SPECTRA OF GE-SB-TE DIFFRACTION GRATING ON A SILICON-ON-INSULATOR WAVEGUIDE
Minnullin, R., & Barabanenkov, M. Y. (2020) · International Forum “Microelectronics – 2020”. Joung Scientists Scholarship “Microelectronics – 2020”. XIII International conference «Silicon – 2020». XII young scientists scholarship for silicon nanostructures and devices physics, material science, process and analysis · doi:10.29003/m1603.silicon-2020/211-214 · Cited by 86
Future of Non-Volatile Memory -From Storage to Computing-
Ishimaru, K. (2019) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm19573.2019.8993609 · Cited by 84
“High non-linearity factor (NLF) of cell itself or cell combined with selector device is required [15] to minimize leakage current.”
BackgroundFeature Extraction Using Memristor Networks
Sheridan, P. M., Du, C., & Lu, W. D. (2016) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2015.2482220 · Cited by 79
“drop in the lines [28].”
Self-citationMemory applications from 2D materials
Chiang, C., Ostwal, V., Wu, P., Pang, C., Zhang, F., Chen, Z., & Appenzeller, J. (2021) · Applied Physics Reviews · doi:10.1063/5.0038013 · Cited by 88
Volatile Resistive Switching Memory Based on Ag Ion Drift/Diffusion Part I: Numerical Modeling
Wang, W. J., Laudato, M., Ambrosi, E., Bricalli, A., Covi, E., Lin, Y., & Ielmini, D. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2928890 · Cited by 82
“2928890 sneak path currents and disturbs [4], [5].”
BackgroundPhysical Unclonable Function Exploiting Sneak Paths in Resistive Cross-point Array
Gao, L., Chen, P.-Y., Liu, R., & Yu, S. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2578720 · Cited by 74
“For memory applications, such sneak paths are detrimental to the read-out sense margin [26], [27], while here we take an advantage of sneak paths.”
BackgroundKim, G., Son, S., Song, H., Jeon, J. B., Lee, J., Cheong, W. H., Choi, S., & Kim, K. M. (2023) · Advanced Science · doi:10.1002/advs.202205654 · Cited by 72
Self-citationBature, U. I., Khir, M. H. M., Nawi, I. M., Zakariya, M. A., & Zahoor, F. (2021) · IEEE Access · doi:10.1109/access.2021.3098061 · Cited by 72
Yu, J., Lee, C., Kim, D., Park, H., Han, J., Hur, J. H., Kim, J., Kim, M., Seo, M., Im, S. G., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010971 · Cited by 69
Role and Optimization of the Active Oxide Layer in TiO2‐Based RRAM
Regoutz, A., Gupta, I., Serb, A., Khiat, A., Borgatti, F., Lee, T., Schlueter, C., Torelli, P., Gobaut, B., Light, M. E., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503522 · Cited by 67
A new opportunity for the emerging tellurium semiconductor: making resistive switching devices
Yang, Y., Xu, M., Jia, S., Wang, B., Xu, L., Wang, X., Liu, H., Liu, Y., Guo, Y., Wang, L., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26399-1 · Cited by 73
Lin, C.-Y., Chen, P., Chang, T., Chang, K., Zhang, S., Tsai, T., Pan, C.-H., Chen, M.-C., Su, Y., Tseng, Y., et al. (2017) · Nanoscale · doi:10.1039/c7nr02305g · Cited by 66
Dongale, T. D., Kamble, G. U., Kang, D. Y., Kundale, S. S., An, H.-M., & Kim, T. G. (2021) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202100199 · Cited by 65
Parallel Architecture With Resistive Crosspoint Array for Dictionary Learning Acceleration
Kadetotad, D., Xu, Z., Mohanty, A., Chen, P.-Y., Lin, B., Ye, J., Vrudhula, S., Yu, S., Cao, Y., & Seo, J.-S. (2015) · IEEE Journal on Emerging and Selected Topics in Circuits and Systems · doi:10.1109/jetcas.2015.2426495 · Cited by 63
“As described in [18], [28], [29], sneak paths can occur when multiple parallely connected RRAM devices have different potentials across them.”
BackgroundSelf‐Curable Synaptic Ferroelectric FET Arrays for Neuromorphic Convolutional Neural Network
Shin, W., Im, J., Koo, R., Kim, J., Kwon, K.-R., Kwon, D., Kim, J., Lee, J., & Kwon, D. (2023) · Advanced Science · doi:10.1002/advs.202207661 · Cited by 64
Memristive computing devices and applications
Zidan, M. A., Chen, A., Indiveri, G., & Lu, W. D. (2017) · Journal of Electroceramics · doi:10.1007/s10832-017-0103-0 · Cited by 68
Self-citationProspects and applications of volatile memristors
Kim, D., Jeon, B., Lee, Y., Kim, D., Cho, Y., & Kim, S. (2022) · Applied Physics Letters · doi:10.1063/5.0093964 · Cited by 65
Chen, Y., Lin, C., & Chang, Y. (2021) · Micromachines · doi:10.3390/mi12010050 · Cited by 54
2D-Material-Based Volatile and Nonvolatile Memristive Devices for Neuromorphic Computing
Xia, X., Huang, W., Hang, P., Guo, T., Yan, Y., Yang, J., Yang, D., Yu, X., & Li, X. (2023) · ACS Materials Letters · doi:10.1021/acsmaterialslett.2c01026 · Cited by 59
Conduction mechanism of a TaO x -based selector and its application in crossbar memory arrays
Wang, M., Zhou, J., Yang, Y., Gaba, S., Liu, M., & Lu, W. D. (2015) · Nanoscale · doi:10.1039/c4nr06922f · Cited by 53
Self-citationA Novel Read Scheme for Large Size One-Resistor Resistive Random Access Memory Array
Zackriya, V. M., Kittur, H. M., & Chin, A. (2017) · Scientific Reports · doi:10.1038/srep42375 · Cited by 50
Su, Y., Wang, M.-C., Zhang, S., et al. (2018) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2018.2805285 · Cited by 51
Electro-Thermal Model of Threshold Switching in TaO x -Based Devices
Goodwill, J. M., Sharma, A. A., Li, D., Bain, J. A., & Skowroński, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16559 · Cited by 53
Single-Readout High-Density Memristor Crossbar
Zidan, M. A., Omran, H. A., Naous, R., Sultan, A., Fahmy, H. A. H., Lu, W. D., & Salama, K. N. (2016) · Scientific Reports · doi:10.1038/srep18863 · Cited by 54
Self-citationAn FPGA-Based Hardware Emulator for Neuromorphic Chip With RRAM
Luo, T., Wang, X., Qu, C., Lee, M. K. F., Tang, W. T., Wong, W., & Goh, R. S. M. (2018) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2018.2889670 · Cited by 48
“Despite the advantages of an RRAM-based neuromorphic chip over other computing platforms, there exist many challenges and constraints in the chip design process [12], [13].”
BackgroundVO2 -Based Selection Device for Passive Resistive Random Access Memory Application
Zhang, K., Wang, B., Wang, F., et al. (2016) · IEEE Electron Device Letters · doi:10.1109/led.2016.2582259 · Cited by 43
“In order to confirm the improvement of crossbar array size by introducing the W/VO2/Pt selector, the readout margin for Ti/HfO2/Pt RRAM device with and without selector was simulated [16], [17], as shown in Fig.”
MethodAn Efficient Heterogeneous Memristive xnor for In-Memory Computing
Lebdeh, M. A., Abunahla, H., Mohammad, B. S., & Al‐Qutayri, M. (2017) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2017.2706299 · Cited by 49
Yoon, K. J., Bae, W., Jeong, D., & Hwang, C. S. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600326 · Cited by 42
Capacitor-Based Synaptic Devices for Hardware Spiking Neural Networks
Hwang, S., Yu, J., Lee, G. H., Song, M. S., Chang, J., Min, K. K., Jang, T., Lee, J., Park, B., & Kim, H. (2022) · IEEE Electron Device Letters · doi:10.1109/led.2022.3149029 · Cited by 40
Challenges and Opportunities: From Near-memory Computing to In-memory Computing
Khoram, S., Zha, Y., Zhang, J., & Li, J. (2017) · International Symposium on Physical Design · doi:10.1145/3036669.3038242 · Cited by 61
“However, all of these types need to address a common challenge in operational robustness due to the limited ON/OFF resistance ratio of NVM technologies (except for CBRAM), which can be mitigated by advanced material engineering [42], cell design [43, 44, 45], and coding technique [46].”
BackgroundUltralow Sub-1-nA Operating Current Resistive Memory With Intrinsic Non-Linear Characteristics
Gaba, S., Cai, F., Zhou, J., & Lu, W. D. (2014) · IEEE Electron Device Letters · doi:10.1109/led.2014.2363618 · Cited by 39
“The self-rectification behavior and the non-linear I–V characteristics are beneficial to improve the read margin in passive RRAM crossbar arrays [15].”
BackgroundSelf-citationUnderstanding of Selector‐Less 1S1R Type Cu‐Based CBRAM Devices by Controlling Sub‐Quantum Filament
Banerjee, W., & Hwang, H. (2020) · Advanced Electronic Materials · doi:10.1002/aelm.202000488 · Cited by 38
Timing Selector: Using Transient Switching Dynamics to Solve the Sneak Path Issue of Crossbar Arrays
Rao, M., Song, W., Kiani, F., Asapu, S., Zhuo, Y., Midya, R., Upadhyay, N. K., Wu, Q., Barnell, M. D., Lin, P., et al. (2021) · Small Science · doi:10.1002/smsc.202100072 · Cited by 43
Song, Y., Wang, X., Wu, Q., Yang, F., Wang, C., Wang, M., & Miao, X. (2022) · Advanced Science · doi:10.1002/advs.202200036 · Cited by 37
Numerical study of read scheme in one-selector one-resistor crossbar array
Kim, S., Kim, H., & Choi, S. (2015) · Solid-State Electronics · doi:10.1016/j.sse.2015.08.001 · Cited by 36
“While previous reports investigated only specific data patterns due to the difficulties of simulation with random data patterns from analytical approaches or SPICE-based simulations, the numerical method proposed in this study has no difficulty in simulating random data patterns [9] [10] [11] [12].”
MethodTubular 3D Resistive Random Access Memory Based on Rolled‐Up h‐BN Tube
Hou, X., Pan, R., Yu, Q., Zhang, K., Huang, G., Mei, Y., Zhang, D. W., & Zhou, P. (2019) · Small · doi:10.1002/smll.201803876 · Cited by 37
Schottky Barrier Control of Self-Polarization for a Colossal Ferroelectric Resistive Switching.
Huang, B.-H., Zhao, X., Li, X.-Q., Li, L.-L., Xie, Z.-S., Wang, D., Feng, D., Jiang, Y., Liu, J., Li, Y., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c01548 · Cited by 31
Dual-Layer Selector With Excellent Performance for Cross-Point Memory Applications
Lin, Q., Li, Y., Xu, M., Cheng, Q., Qian, H., Feng, J., Tong, H., & Miao, X. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2808465 · Cited by 36
“2808465 indicating fast switching and large operation window [3], [6],”
BackgroundCrossbar array of selector-less TaOx/TiO2 bilayer RRAM
Chou, C.-T., Hudec, B., Hsu, C.-W., Lai, W.-L., Chang, C.-C., & Hou, T. (2015) · Microelectronics Reliability · doi:10.1016/j.microrel.2015.04.002 · Cited by 37
“Most common configurations for crossbar array cells are one bipolar selector-one resistor (1S1R) [3-6] and one diode-one resistor (1D1R) [7], depending on the type of selection device used.”
BackgroundZhang, G., Fan, X., Wang, J., Wang, Z., Zhang, Z., Li, P., Ma, Y., Huang, K., Yu, B., Wan, Q., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-60970-4 · Cited by 63
“To address this challenge, various con-fi gurations such as transistor-memristor (1T1M) 5 , diode-memristor (1D1M) 21 , and selector-memristor (1S1M) 22 have been proposed.”
Bae, W., Yoon, K. J., Hwang, C. S., & Jeong, D. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/48/485201 · Cited by 35
“In the simulation, all the unselected cells are assumed to be in LRS to impose the maximum sneak current condition ( worst-case scenario ) , and the LRS resistance is fi xed at 50 k Ω [ 3 ] .”
BackgroundMethodInfluentialInk‐Based Additive Nanomanufacturing of Functional Materials for Human‐Integrated Smart Wearables
Xu, S., & Wu, W. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000117 · Cited by 36
Levisse, A., Giraud, B., Noël, J.-P., Moreau, M., & Portal, J. (2015) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2015.7457426 · Cited by 36
“During a read or write operation in a crossbar array, SP currents degrade the operation efficiency (read margin reduction and write current control reduction) [12] [13].”
BackgroundDesign Considerations of Selector Device in Cross-Point RRAM Array for Neuromorphic Computing
Woo, J., Peng, X., & Yu, S. (2018) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2018.8351735 · Cited by 39
“To our best knowledge, the design considerations on the selector devices for memory applications have been extensively studied [10-12], while for neuromorphic applications have been rarely studied.”
BackgroundFerroelectric capacitive memories: devices, arrays, and applications
Zhou, Z., Jiao, L., Zheng, Z., Chen, Y., Han, K., Kang, Y., Zhang, D., Wang, X., Kong, Q., Sun, C., et al. (2025) · Nano Convergence · doi:10.1186/s40580-024-00463-0 · Cited by 39
Cross-point Resistive Memory: Nonideal Properties and Solutions
Wang, C., Feng, D., Tong, W., Liu, J., Li, Z., Chang, J., Zhang, Y., Wu, B., Xu, J., Zhao, W. J., et al. (2019) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3325067 · Cited by 40
Abbasi, M. S., Irshad, M. S., Arshad, N., et al. (2020) · ACS Omega · doi:10.1021/acsomega.0c02410 · Cited by 33
Electrothermal Characterization in 3-D Resistive Random Access Memory Arrays
Luo, Y., Chen, W., Cheng, M., & Yin, W. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2615864 · Cited by 33
Inversion-Type Ferroelectric Capacitive Memory and Its 1-Kbit Crossbar Array
Zhou, Z., Jiao, L., Zhou, J., Zheng, Z., Chen, Y., Han, K., Kang, Y., & Gong, X. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3243556 · Cited by 32
Self-citationPerspective: Uniform switching of artificial synapses for large-scale neuromorphic arrays
Tan, S. H., Lin, P., Yeon, H., Choi, S., Park, Y., & Kim, J. (2018) · APL Materials · doi:10.1063/1.5049137 · Cited by 33
Park, J. H., Kim, D., Kang, D. Y., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08166 · Cited by 29
Performance Limit and Coding Schemes for Resistive Random-Access Memory Channels
Song, G., Cai, K., Zhong, X., et al. (2021) · IEEE Transactions on Communications · doi:10.1109/tcomm.2021.3051413 · Cited by 29
“We remark that for our proposed across-array coding strategy, the additional read/write latency can be minimized if a parallel reading/writing circuit [11] is adopted across different crossbar arrays.”
BackgroundGao, Y., Kavehei, O., Al-Sarawi, S. F., Ranasinghe, D. C., & Abbott, D. (2016) · Integration · doi:10.1016/j.vlsi.2016.02.002 · Cited by 32
“Here, the coefficient p1⁄4 18:4, a constant value, is set to the same value presented in [12].”
BackgroundInfluentialDevice and Circuit Interaction Analysis of Stochastic Behaviors in Cross-Point RRAM Arrays
Li, H., Huang, P., Gao, B., Liu, X., Kang, J., & Wong, H. ‐. P. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2766046 · Cited by 32
“Several arraylevel studies have analyzed the impact of typical device characteristics (without variability) on array write/read operations [22]–[27], while others further investigate the variability impact on read performance using simplified resistor models [28], [29].”
BackgroundSelf-Limited and Forming-Free CBRAM Device With Double Al2O3 ALD Layers
Shin, J. H., Wang, Q., & Lu, W. D. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2868459 · Cited by 28
“Low programming current helps mitigate the series resistance issue and reduces the operation power [12], while nonlinear I-V characteristics in low resistance state (LRS) helps mitigate sneak currents [13], [14].”
BackgroundMethodSelf-citationWoo, H. C., Kim, J., Lee, S., Kim, H. J., & Hwang, C. S. (2022) · Advanced Electronic Materials · doi:10.1002/aelm.202200656 · Cited by 30
Kwon, D., Woo, S. Y., Lee, K.-H., Hwang, J., Kim, H., Park, S., Shin, W., Bae, J., Kim, J., & Lee, J. (2023) · Science Advances · doi:10.1126/sciadv.adg9123 · Cited by 29
Wald, N., & Kvatinsky, S. (2019) · Microelectronics Journal · doi:10.1016/j.mejo.2019.02.013 · Cited by 29
“Therefore, the total crossbar size may be further limited [48,49].”
Kim, J., Im, J., Shin, W., Lee, S., Oh, S., Kwon, D., Jung, G., Choi, W. Y., & Lee, J. (2024) · Advanced Science · doi:10.1002/advs.202308460 · Cited by 28
A neuromorphic ASIC design using one-selector-one-memristor crossbar
Yan, B., Mahmoud, A. M., Yang, J. J., Wu, Q., Chen, Y., & Li, H. H. (2016) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2016.7527509 · Cited by 28
“As the scale of crossbar increases, the impact become even more severe [10].”
BackgroundFully Printed Memristors from Cu–SiO2 Core–Shell Nanowire Composites
Catenacci, M. J., Flowers, P. F., Cao, C. C., Andrews, J. B., Franklin, A. D., & Wiley, B. J. (2017) · Journal of Electronic Materials · doi:10.1007/s11664-017-5445-5 · Cited by 27
Zhang, L., Cosemans, S., Wouters, D. J., Groeseneken, G., Jurczak, M., & Govoreanu, B. (2015) · IEEE Electron Device Letters · doi:10.1109/led.2015.2427313 · Cited by 26
“using 1/3 bias scheme improves RM, this trades off with the read power consumption [8], [11].”
BackgroundMethodNarayanan, P., Burr, G. W., Shenoy, R. S., Stephens, S., Virwani, K. R., Padilla, A., Kurdi, B. N., & Gopalakrishnan, K. (2015) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2015.2442242 · Cited by 26
“References [32]–[37] all quantify read margins on 1AD1R crossbar arrays without considering write power.”
BackgroundComprehensive Scaling Study on 3D Cross-Point PCM toward 1Znm Node for SCM Applications
Chien, W.-C., Ho, H. Y., Yeh, C. W., et al. (2019) · Symposium on VLSI Technology · doi:10.23919/vlsit.2019.8776516 · Cited by 25
A 2M1M Crossbar Architecture: Memory
Teimoory, M., Amirsoleimani, A., Ahmadi, A., & Ahmadi, M. (2018) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2018.2799951 · Cited by 25
“The architectures based on 1S1R memory cell are one of the most promising memory structures as the high density 4F2, very small sneak paths current, very low power consumption, and high read margin that is very promising [23], [26]–[31].”
BackgroundResultWang, Y., Zhang, Z., Li, H., & Shi, L. (2018) · Journal of Electronic Materials · doi:10.1007/s11664-018-6730-7 · Cited by 25
Khan, S. A., & Kim, S. (2020) · RSC Advances · doi:10.1039/d0ra06389d · Cited by 24
Ta2O5-y-based ReRAM device with annealing-free Ag:ZrNx-based bilayer selector device
Kim, D., Park, J. H., Jeon, D. S., Dongale, T. D., & Kim, T. G. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.157261 · Cited by 25
Material and Structural Engineering of Ovonic Threshold Switch for Highly Reliable Performance
Seo, H. K., Ryu, J. J., Lee, S. Y., Park, M., Park, S.-G., Song, W., Kim, G. H., & Yang, M. (2022) · Advanced Electronic Materials · doi:10.1002/aelm.202200161 · Cited by 26
Scaling behavior of oxide-based electrothermal threshold switching devices
Li, D., Goodwill, J. M., Bain, J. A., et al. (2017) · Nanoscale · doi:10.1039/c7nr03865h · Cited by 23
Architecture, design and technology guidelines for crosspoint memories
Levisse, A., Royer, P., Giraud, B., Noel, J. P., Moreau, M., & Portal, J. M. (2017) · IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH) · doi:10.1109/nanoarch.2017.8053733 · Cited by 22
Sahu, D. P., Park, K., Han, J., & Yoon, T. (2022) · APL Materials · doi:10.1063/5.0090425 · Cited by 22
Variability-Aware Memristive Crossbars—A Tutorial
James, A. P., & Chua, L. O. (2022) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2022.3169416 · Cited by 30
“The choice of the selector device [42] is critical for the reliable operation of the crossbar.”
BackgroundBae, D., Lee, D., Jung, J.-S., Kim, S., & Kim, H. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.04.212 · Cited by 20
Hsieh, C., Chang, Y., Chen, Y., et al. (2017) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0041709jss · Cited by 20
Ivanov, A. I., Nebogatikova, N. A., Kotin, I. A., Smagulova, S. A., & Antonova, I. V. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab0cb3 · Cited by 21
CONCEPT: A Co lum n -Oriented Memory C ontroller for E fficient Memory and P IM Opera t ions in RRAM
Talati, N., Ha, H., Perach, B., Ronen, R., & Kvatinsky, S. (2019) · IEEE Micro · doi:10.1109/mm.2018.2890033 · Cited by 23
Metadata
- Authors
- Zhou, J., Kim, K.-H., & Lu, W.
- Affiliations
- University of Michigan (US)
- Commissariat à l'Énergie Atomique et aux Énergies Alternatives (FR)
- ORCID
- Wei Lu
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2014-05
- Volume
- 61
- Issue
- 5
- Pages
- 1369-1376
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W4253860821
- Cited by
- 310
- References
- 27
- Citations by year
- 2026: 11 · 2025: 14 · 2024: 10 · 2023: 16 · 2022: 22 · 2021: 25 · 2020: 109 · 2019: 24 · 2018: 18 · 2017: 25 · 2016: 16 · 2015: 18 · 2014: 2
- FWCI
- 10.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Keywords
- resistive random access memory, crossbar arrays, selector devices, read operation, read margin, low power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.