Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
The DOI matches its Crossref record; 24 of the 27 references it cites were found in a registry or an index.
Abstract
Passive crossbar resistive random access memory (RRAM) arrays require select devices with nonlinear I-V characteristics to address the sneak-path problem. Here, we present a systematical analysis to evaluate the performance requirements of select devices during the read operation of RRAM arrays for the proposed one-selector-one-resistor (1S1R) configuration with serially connected selector/storage element. We found high selector current density is critical and the selector nonlinearity (ON/OFF) requirement can be relaxed at present. Different read schemes were analyzed to achieve high read margin and low power consumption. Design optimizations of the sense resistance and the storage elements are also discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Inserting a two‐terminal selector in series with the memristor cell can be a viable solution,[ 2 ] but it requires a significant burden in material development and integration processing.”
From Retention Secured Nonlinear and Self-Rectifying Analog Charge Trap Memristor for Energy-Efficient Neuromorphic Hardware (2023) · cites this paper as [2]
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923 · cited 1×
“RESISTIVE memory with two-terminal storage elements is identified as a promising candidate for the nextgeneration nonvolatile memory, due to its inherent 4F2 cell size, sub-10-nm scaling potential, high speed, low power consumption, potential for 3-D integration, and simplicity in fabrication [1], [2].”
BackgroundMemristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885 · cited 1×
“RESISTIVE memory with two-terminal storage elements is identified as a promising candidate for the nextgeneration nonvolatile memory, due to its inherent 4F2 cell size, sub-10-nm scaling potential, high speed, low power consumption, potential for 3-D integration, and simplicity in fabrication [1], [2].”
BackgroundComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Complementary resistive switching in tantalum oxide-based resistive memory devices
Yang, Y., Sheridan, P., & Lu, W. (2012) · Applied Physics Letters · doi:10.1063/1.4719198 · Cited by 224
Self-citationLee, M., Kim, S. I., Lee, C. B., Yin, H., Ahn, S., Kang, B. S., Kim, K. H., Park, J. C., Kim, C. J., Song, I., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801032 · Cited by 217
Self-citationNanoscale resistive memory with intrinsic diode characteristics and long endurance
Kim, K.-H., Hyun Jo, S., Gaba, S., & Lu, W. (2010) · Applied Physics Letters · doi:10.1063/1.3294625 · Cited by 187 · cited 1×
“To date, selectors based on different mechanisms, such as Schottky barriers [6]–[8], tunnel barriers [9], metal–insulator transition [10]–[12], Zener”
BackgroundSelf-citationBipolar Nonlinear $\hbox{Ni/TiO}_{2}\hbox{/}\hbox{Ni}$ Selector for 1S1R Crossbar Array Applications
Huang, J.-J., Tseng, Y.-M., Hsu, C.-W., & Hou, T.-H. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2161601 · Cited by 184
Research works printed but not linked: 4
- cha, 0, Nanoscale (10 nm) 3D vertical ReRAM and ${\rm NbO}&underscore;{2}$ threshold selector with TiN electrode, IEDM Tech Dig, 10.5.1
- 2012, International Technology Roadmap for Semiconductors
- kawahara, 0, An 8 Mb multilayered cross-point ReRAM macro with 443 MB/s write throughput, IEEE ISSCC Tech Dig Papers, 432
- lee, 0, Varistor-type bidirectional switch ( ${\rm JMAX}{>}10^{7}~{\rm A}/{\rm cm}^{2}$ , selectivity $10^{4}$ ) for 3D bipolar resistive memory arrays, Proc VLSI Symp, 37
Cited by
Items 301–309 of 309
Threshold Switching Behavior and Underlying Mechanisms in Pure SiO 2 -Based Selectors
Kim, H. R., Ha, T. J., Song, J. H., Park, S., Moon, J. S., Choi, M., Lee, J. H., Han, J. H., Choi, B. J., Jang, J. H., et al. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c25598 · Cited by 1
Correcting processing-in-memory multiply-accumulate arithmetic errors with LDPC
Shi, D., Fu, Y., Zhu, Y., Fan, A., Tao, Y., Yan, B. Y., & Yang, Y. (2026) · npj Unconventional Computing · doi:10.1038/s44335-026-00061-9
Conception de véhicules de tests pour l’étude de mémoires non-volatiles émergentes embarquées
Gasquez, J. (2022) · theses.fr (ABES) · doi:10.70675/d7bc97d8z0767z45efz8efdza4febd361be2
Chemically produced two-dimensional conducting interfaces for memory and neuromorphic applications
Yoon, S., Lee, H. J., & Moon, T. (2026) · Chemical Physics Reviews · doi:10.1063/5.0297839
Kanthaswamy, A. S., & Thakre, A. (2026) · Advanced Materials Technologies · doi:10.1002/admt.71088
“To overcome this, an additional selector [ 26 ] or transistor [ 27 ] is required in the circuit design, creating an additional burden on the crossbar architecture.”
Lee, S., Ju, S., Lee, W. J., Kang, M., Kim, S., & Kim, Y. (2026) · Advanced Science · doi:10.1002/advs.76640
“Although inserting a two-terminal selector in series with the RRAM cell can suppress sneak currents, it introduces additional process complexity and increases device variability [ 25 ].”
A 64-bit high-precision flash computing-in-memory architecture with a parallel input scheme
Feng, Y., Guo, X., Chen, C., Fan, Y., Li, X., Chen, B., Zhang, J., Liu, J., Zhan, X., Wu, J., et al. (2026) · Science China Information Sciences · doi:10.1007/s11432-025-4826-6
“When targeting large-scale and high-precision computing, RRAM faces limitations due to its maximum array sizes [12].”
Paasio, E., Thomann, S., Anu, A., Li, X., Ranta, R., Srivari, P., Muhammad, S., Mazumder, S., Mariam, J., Padovani, A., et al. (2026) · Microsystems & Nanoengineering · doi:10.1038/s41378-026-01429-4
Heo, D. Y., Hwang, S. J., Kim, G., Hilal, M., Cai, Z., Kang, J., & Kim, H. (2026) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2026.101273
Metadata
- Authors
- Zhou, J., Kim, K.-H., & Lu, W.
- Affiliations
- University of Michigan (US)
- Commissariat à l'Énergie Atomique et aux Énergies Alternatives (FR)
- ORCID
- Wei Lu
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2014-05
- Volume
- 61
- Issue
- 5
- Pages
- 1369-1376
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W4253860821
- Cited by
- 310
- References
- 27
- Citations by year
- 2026: 11 · 2025: 14 · 2024: 10 · 2023: 16 · 2022: 22 · 2021: 25 · 2020: 109 · 2019: 24 · 2018: 18 · 2017: 25 · 2016: 16 · 2015: 18 · 2014: 2
- FWCI
- 10.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Keywords
- resistive random access memory, crossbar arrays, selector devices, read operation, read margin, low power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.