Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
The DOI matches its Crossref record; 35 of the 40 references it cites were found in a registry or an index.
Abstract
A comprehensive analysis of write operations (SET and RESET) in a resistance-change memory (resistive random access memory) crossbar array is carried out. Three types of resistive switching memory cells-nonlinear, rectifying-SET, and rectifying-RESET-are compared with each other in terms of voltage delivery, current delivery, and power consumption. Two different write schemes, V/2 and V/3, were considered, and the V/2 write scheme is preferred due to much lower power consumption. A simple numerical method was developed that simulates entire current flows and node voltages within a crossbar array and provides a quantitative tool for the accurate analysis of crossbar arrays and guidelines for developing reliable write operation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Memristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228 · cited 14×
“1(b) and (c) apply to both serially connected 1S1R cell structures, as well as RRAM cells with intrinsic nonlinear or self-rectifying behaviors, since the simulations 0018-9383 © 2014 IEEE.”
BackgroundMethodInfluentialComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Chen, A. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2013.2246791 · Cited by 230 · cited 1×
“Although several quantitative analyses of crossbar array architecture for read operation have been recently conducted [11]–[13], the study of the write operation for the three types of 1S1R systems has not yet been reported.”
BackgroundComplementary resistive switching in tantalum oxide-based resistive memory devices
Yang, Y., Sheridan, P., & Lu, W. (2012) · Applied Physics Letters · doi:10.1063/1.4719198 · Cited by 224
Self-citationLee, M., Kim, S. I., Lee, C. B., Yin, H., Ahn, S., Kang, B. S., Kim, K. H., Park, J. C., Kim, C. J., Song, I., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801032 · Cited by 217
Self-citation
Research works printed but not linked: 1
- lee, 2012, Varistor-type bidirectional switch (JMAX> \( \sim {10^7}\) A/cm \( \sim {10^2}\) , selectivity \( \sim {10^4}\) ) for 3D bipolar resistive memory arrays, Proc Symp VLSIT, 37
Cited by
Items 101–200 of 221
Resistive switching memory for high density storage and computing*
Xu, X., Luo, Q., Gong, T., Lv, H., Liu, Q., & Liu, M. (2021) · Chinese Physics B · doi:10.1088/1674-1056/abe0c4 · Cited by 16
Brackmann, L., Ziegler, T., Jafari, A., Wouters, D. J., Tahoori, M. B., & Menzel, S. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300579 · Cited by 13
Tang, Z., Wang, Y., Chi, Y., & Fang, L. (2018) · Electronics · doi:10.3390/electronics7100224 · Cited by 14
Dynamic Computing in Memory (DCIM) in Resistive Crossbar Arrays
Motaman, S., & Ghosh, S. (2018) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2018.00036 · Cited by 15
Quasi-Analytical Model of 3-D Vertical-RRAM Array Architecture for MB-Level Design
Li, Z., Chen, P.-Y., Liu, H., Li, Q., Xu, H. F., & Yu, S. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2665642 · Cited by 13
“D cross-point arrays [10]–[12].”
Improved rectification characteristics by engineering energy barrier height in TiOx-based RRAM
Kim, T., Kim, S., & Park, B. (2020) · Microelectronic Engineering · doi:10.1016/j.mee.2020.111498 · Cited by 13
Self-citationTruong, S. N. (2019) · Micromachines · doi:10.3390/mi10100671 · Cited by 15
Memcapacitive Devices in Logic and Crossbar ApplicationsPreprint
Tran, D., & Teuscher, C. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1704.05921 · Cited by 17
“-5 C h a r g e ( C ) Biolek Mohamed”
BackgroundLi, G., Wei, J., Wang, H., Xiong, R., Wang, D., Zhu, Y., Liu, Y., Zou, Z., Xu, J., & Ma, H. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.06.171 · Cited by 14
Improved Resistive Switching Observed in Ti/Zr3N2/p-Si Capacitor via Hydrogen Passivation
Bae, D., Lee, D., Kim, S., & Kim, H. (2022) · IEEE Access · doi:10.1109/access.2022.3142368 · Cited by 11
“depends on read voltage (VR) of unselected cells called the read scheme [39]–[41].”
BackgroundSelf-citationDoowon, L., Bae, D., Sungho, K., & Kim, H. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.04.007 · Cited by 12
Thermal and Signal Integrity Analysis of Novel 3D Crossbar Resistive Random Access Memories
Zayer, F., Lahbacha, K., Dghais, W., Belgacem, H., de Magistris, M., Maffucci, A., & Melnikov, A. V. (2019) · IEEE Workshop on Signal and Power Integrity · doi:10.1109/sapiw.2019.8781680 · Cited by 11
“For instance, the 1/3 bias scheme enables a larger read margin due to the reduced IR voltage drop of the selected cell [5]–[7], while 1/2 write scheme is preferred, due to a much lower power consumption.”
BackgroundSung, C., Lim, S., & Hwang, H. (2020) · IEEE Electron Device Letters · doi:10.1109/led.2020.2979236 · Cited by 11
“important for low-power and disturbance problems during read or write operations [3], [4].”
BackgroundAsymmetric-Structure-Induced Self-Rectifying in Nanoscale HfO2-Based RRAM Array
Zhang, X., Ji, H., & Jiang, R. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2924038 · Cited by 12
A comparative study on the performance of 1S-1R and Complementary resistive switching models
Jagath, A. L., & Kumar, T. N. (2020) · IEEE International Conference on Semiconductor Electronics · doi:10.1109/icse49846.2020.9166874 · Cited by 11
“To control this leakage current, various engineering designs are employed such as usage of active components like diodes and transistors in association with memory [9, 10], bidirectional selector switches developed with material stacks (1S-1R)[8, 11, 12], and implementing complementary resistive switches (CRS)[13, 14].”
MethodTruong, S. N. (2019) · Materials · doi:10.3390/ma12244097 · Cited by 10
Solution to alleviate the impact of line resistance on the crossbar array
Zhu, X. J., Li, Z., Liu, H., Li, Q., Liu, S., Li, N., & Xu, H. (2020) · IET Circuits Devices & Systems · doi:10.1049/iet-cds.2019.0313 · Cited by 9
Kim, I., Woo, J., Hwang, H.-G., Kim, B., & Nahm, S. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.02.021 · Cited by 10
Cell Design Considerations for Ovonic Threshold Switch-Based 3-D Cross-Point Array
Ban, S., Lee, J., Kim, T., & Hwang, H. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3236913 · Cited by 9
Non-stoichiometric WO3−x-based nanoscale memristor for high-density memory
Rudrapal, K., Das, S., Basori, R., Banerji, P., Venimadhav, A., & Chaudhuri, A. R. (2023) · AIP Advances · doi:10.1063/5.0161638 · Cited by 9
Jeon, H., Park, J., Kim, H., Kim, H., Jang, W., Song, H., & Jeon, H. (2015) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.4927368 · Cited by 9
Non-Volatile Memory Technology for Data Age
Ishimaru, K. (2018) · IEEE International Conference on Solid-State and Integrated Circuit Technology · doi:10.1109/icsict.2018.8564815 · Cited by 9
Modelling resistive and phase-change memory with passive selector arrays: a MATLAB tool
Noori, Y. J., & de Groot, C. H. (2020) · Journal of Computational Electronics · doi:10.1007/s10825-020-01504-7 · Cited by 9
“In our simulations, the sense margin is calculated using the change in voltage dropped across the sense resistor between scenarios 8 and 9 [16], [22].”
MethodLim, H., Sun, W., & Shin, H. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2506598 · Cited by 10
Fundamental issues of implementing hardware neural networks using memristor
Gi, S.-G., Yeo, I., Chu, M., Kim, S.-H., & Lee, B. (2015) · International SoC Design Conference · doi:10.1109/isocc.2015.7401790 · Cited by 11
Self-citationA Back-End-Of-Line Compatible, Ferroelectric Analog Non-Volatile Memory
Bégon‐Lours, L., Halter, M., Pineda, D. D., et al. (2021) · IEEE International Memory Workshop (IMW) · doi:10.1109/imw51353.2021.9439611 · Cited by 9
Compensating for sneak currents in multi-level crosspoint resistive memories
Luo, T., Milenković, O., & Peleato, B. (2015) · Asilomar Conference on Signals, Systems and Computers (ACSSC) · doi:10.1109/acssc.2015.7421253 · Cited by 8
Effect of Graphene/TiO2 (001) Interface on Threshold Voltage and Nonlinearity
Dai, Y., Gong, S., Zhong, Z., Gao, F., Wang, F., Ding, C., Yang, J., & Yang, F. (2018) · NANO · doi:10.1142/s1793292018300049 · Cited by 8
Directed Assembly of Nanoparticle Threshold‐Selector Arrays
Speckbacher, M., Rinderle, M., Kaiser, W., Osman, E. A., Chryssikos, D., Cattani‐Scholz, A., Gibbs, J. M., Gagliardi, A., & Tornow, M. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900098 · Cited by 8
Amorphous ITZO-Based Selector Device for Memristor Crossbar Array
Kim, K. H., Seo, M.-J., & Jang, B. C. (2023) · Micromachines · doi:10.3390/mi14030506 · Cited by 9
“simulation through MATLAB [43] (Figure S4).”
BackgroundMethodInfluentialDemonstration of β-Ga2O3 nonvolatile flash memory for oxide electronics
Khandelwal, V., Rajbhar, M. K., García, G. I. M., Tang, X. L., Sarkar, B., & Li, X. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acdbf3 · Cited by 10
An approximate condition to avoid reverse leakage current in ReRAM crossbar design
Youn, Y., Sim, J., Park, H.-J., et al. (2015) · International SoC Design Conference · doi:10.1109/isocc.2015.7401656 · Cited by 8
A Low Power Reconfigurable Memory Architecture for Complementary Resistive Switches
Wu, B., Feng, D., Tong, W., Liu, J., Wang, C., Zhao, W. J., & Zhang, Y. (2019) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2019.2927520 · Cited by 9
“Even with the adoption of selectors, there is still a significant energy (power) consumption improvement over V/3 write scheme by using V/2 write scheme [38], [39].”
MethodSelector-only-memory device using chalcogenide thin film in a 4k crossbar array
Seo, H. K., Jeong, W. H., Jung, J., Park, M. H., Kim, G. H., & Yang, M. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101169 · Cited by 9
Farjadian, M., & Shalchian, M. (2022) · Journal of Computational Electronics · doi:10.1007/s10825-022-01860-6 · Cited by 7
“[31] proposed V/2 and V/3 schemes for the correct operation of the crossbar architecture.”
BackgroundDing, Y., An, J., Shen, J., Jia, S., Guo, J., Wang, L., Gong, T., Jiang, P., Wang, Y., Chen, Y., et al. (2022) · Advanced Electronic Materials · doi:10.1002/aelm.202200870 · Cited by 7
Switching Time and Stability Evaluation for Writing Operation of STT-MRAM Crossbar Array
Lim, H., Lee, S., & Shin, H. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2597195 · Cited by 7
Strong Read and Write Interference Induced by Breakdown Failure in Crossbar Arrays
Chang, C., Huang, H., Hudec, B., Wu, M.-H., Chang, C.-C., Liu, P., & Hou, T. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.3031551 · Cited by 8
Wan, X., Yan, J., Cui, S., Xu, Y., & Sun, H. (2025) · Organic Electronics · doi:10.1016/j.orgel.2025.107253 · Cited by 7
Bao, L., Zhang, H., Wang, Z., et al. (2025) · Science China Information Sciences · doi:10.1007/s11432-024-4420-5 · Cited by 6
An efficient method for evaluating RRAM crossbar array performance
Lin, S., Zhang, J., Chen, A., Wu, H., Qian, H., & Yu, Z. (2016) · Solid-State Electronics · doi:10.1016/j.sse.2016.03.004 · Cited by 6
Exploiting In-Memory Data Patterns for Performance Improvement on Crossbar Resistive Memory
Wen, W., Zhao, L., Zhang, Y., & Yang, J. (2019) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2019.2940685 · Cited by 6
Investigation on the Worst Read Scenario of a ReRAM Crossbar Array
Youn, Y., Kim, K., Sim, J., Park, H.-J., & Kim, B. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2710140 · Cited by 6
Voltage‐Tunable Ultra‐Steep Slope Atomic Switch with Selectivity over 1010
Kim, K. J., Park, Y., Kim, M., & Lee, J. (2021) · Small · doi:10.1002/smll.202100401 · Cited by 6
Applications of Resistive Switching Memory as Hardware Security Primitive
Carboni, R., & Ielmini, D. (2019) · Springer series in advanced microelectronics · doi:10.1007/978-981-13-8379-3_4 · Cited by 11
“Note that for memory applications the sneak path effect is detrimental for cell read-out margin [88].”
BackgroundWang, C., Feng, D., Tong, W., Liu, J., Wu, B., Zhao, W. J., & Zhang, Y. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2945058 · Cited by 7
Sneak Path Free Reconfiguration With Minimized Programming Steps for Via-Switch Crossbar-Based FPGA
Doi, R., Yu, J., & Hashimoto, M. (2019) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2019.2960331 · Cited by 6
Transfer modeling of 1T1R crossbar arrays with line resistances based on matrix algebra method
Zhang, X., Zeng, Y., Yuan, L., & Zhou, L. P. (2021) · Solid-State Electronics · doi:10.1016/j.sse.2021.108220 · Cited by 5
Influence of selector-introduced compliance current on HfOx RRAM switching operation
Fang, Y., Cai, Y., Wang, Z., et al. (2015) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2015.7457474 · Cited by 5
Pan, C., & Naeemi, A. (2018) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2018.2848844 · Cited by 5
“Many studies have investigated the required selector properties for the read and write operations [20]–[23].”
BackgroundGarcía, H., Domínguez, L. A., Castán, H., et al. (2019) · Microelectronic Engineering · doi:10.1016/j.mee.2019.111083 · Cited by 5
Analysis of Leakage Current of HfO2/TaOx-Based 3-D Vertical Resistive Random Access Memory Array
Chen, Z., Song, R., Huo, Q., Ren, Q., Zhang, C., Li, L., & Zhang, F. (2021) · Micromachines · doi:10.3390/mi12060614 · Cited by 6
Lahbacha, K., Zayer, F., Hamdi, B., Dghais, W., & Maffucci, A. (2021) · IEEE Open Journal of Nanotechnology · doi:10.1109/ojnano.2021.3124846 · Cited by 8
Nano Helical-Shaped Dual-Functional Resistive Memory for Low-Power Crossbar Array Application
Chen, Y., Sarkar, S., Gibbs, J. G., Huang, Y., Lee, J. C., Lin, C., & Lin, C.-H. (2022) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.2c00050 · Cited by 5
Midya, R., Wang, Z., Rao, M., Upadhyay, N. K., & Yang, J. J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102584-0.00015-2 · Cited by 7
Gao, Y., Kavehei, O., Ranasinghe, D. C., Al-Sarawi, S. F., & Abbott, D. (2015) · arXiv (Cornell University) · doi:10.48550/arxiv.1507.02077 · Cited by 5
Lee, M., Lee, S., Kim, M., et al. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.172863 · Cited by 4
Investigation of power dissipation for ReRAM in crossbar array architecture
Sun, W., Lim, H., Shin, H., & Lee, W. (2014) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2014.7060847 · Cited by 4
Chen, Y. (2021) · Frontiers in Nanotechnology · doi:10.3389/fnano.2021.772234 · Cited by 4
High Driving Current Selector Based on As-Implanted HfO2 Thin Film for 3D Phase Change Memory
Wang, R., Guo, T., Yao, D., et al. (2021) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.1c00980 · Cited by 4
Design Space Exploration for Selector Diode-STTRAM Crossbar Arrays
Ghosh, S., Jha, R., Iyengar, A. S., et al. (2018) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2018.2810185 · Cited by 4
“Selector diodes (SD), such as mixed ionic electronic conduction [1], metal– insulator–metal (MIM) tunneling [2], oxide heterojunction p-n, and Schottky diodes [3] for resistive RAM (ReRAM), have been extensively studied [4].”
BackgroundPeripheral Circuit Design Considerations of Neuro-inspired Architectures
Kadetotad, D. V., Chen, P.-Y., Cao, Y. K., Yu, S., & Seo, J.-S. (2017) · Springer eBooks · doi:10.1007/978-3-319-54313-0_9 · Cited by 5
Designing a differential 3R-2bit RRAM cell for enhancing read margin in cross-point RRAM arrays
Nakhkash, M., Bardareh, H., Zokaee, F., & Zarandi, H. R. (2017) · IEEE Nordic Circuits and Systems Conference (NorCAS) · doi:10.1109/norchip.2017.8124954 · Cited by 3
Reliability Risks Due to Faults Affecting Selectors of ReRAMs and Possible Solutions
Omaña, M., Bardhan, S., & Metra, C. (2021) · IEEE Transactions on Emerging Topics in Computing · doi:10.1109/tetc.2021.3114961 · Cited by 3
“It should be noted that the use of the considered half bias scheme, or of the one third bias scheme depends mainly on the value of the wire parasitic resistance and on the size of the ReRAM crossbar array [2], [24].”
BackgroundDie area recovery to record a resistive memory in a memristive crossbar array
Ali, H., Feng, Z., & Ni, H. (2021) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2021.154058 · Cited by 3
Fu, L., Yang, K., Gao, X., Song, X., Wu, Z., Fan, X., & Li, Y. (2021) · Materials Today Advances · doi:10.1016/j.mtadv.2021.100197 · Cited by 3
Oxide-based Resistive RAM Analog Synaptic Behavior Assessment for Neuromemristive systems
Aziza, H. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.1002782 · Cited by 4
Puglisi, F. M., Celano, U., Padovani, A., Vandervorst, W., Larcher, L., & Pavan, P. (2017) · IEEE International Reliability Physics Symposium proceedings · doi:10.1109/irps.2017.7936390 · Cited by 3
Improving Multilevel Writes on Vertical 3-D Cross-Point Resistive Memory
Wang, C., Feng, D., Tong, W., Hua, Y., Liu, J., Wu, B., Zhao, W. J., Song, L., Zhang, Y., Xu, J., et al. (2020) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2020.3006188 · Cited by 5
Resistive switching behaviors of Ti nano-layer embedded TaOx-based devices
Jeon, H., Jeon, H., Park, J., et al. (2016) · Current Applied Physics · doi:10.1016/j.cap.2016.08.020 · Cited by 3
New write operation scheme for alleviating effect of line resistance on RRAM crossbar array
Li, J., Xu, H. F., Xing, J., Song, B., Liu, S., Li, Z., Wang, W., Li, Q., & Liu, H. (2016) · IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC) · doi:10.1109/imcec.2016.7867326 · Cited by 3
“B. Partial bias scheme based on lD-1R Crossbar Array At present, for write operation on crossbar array, the bias voltage schemes are typically V/2 scheme[S], V/3 scheme[6] as shown in Fig.3 (a) and (b). s,' V.:/ WI ected , w, '0 Unsele {� .. " cted : Wm '0 '" ."”
MethodA Multi-Driver Write Scheme for Reliable and Energy Efficient 1S1R ReRAM Crossbar Arrays
Amer, S., & Rose, G. S. (2019) · International Symposium on Quality Electronic Design (ISQED) · doi:10.1109/isqed.2019.8697361 · Cited by 3
“In this work, we adopt the V/2 bias scheme due to its lower power consumption [4].”
BackgroundMethodInfluentialComparative Study of Selector Device Design for Sneak Current in 3D Crosspoint ReRAM
Dilna, U., & Prasad, S. N. (2020) · International Conference on Multimedia Processing, Communication & Information Technology (MPCIT) · doi:10.1109/mpcit51588.2020.9350434 · Cited by 4
Park, J. Y., Yoo, S., Park, B., et al. (2021) · Nano Research · doi:10.1007/s12274-020-3185-y · Cited by 3
Electrothermal RRAM Crossbar Improvement with 3-D CRS and 1D1R-1R1D Architectures
Lahbacha, K., Belgacem, H., Dghais, W., Zayer, F., & Maffucci, A. (2021) · IEEE International Conference on Design & Test of Integrated Micro & Nano-Systems (DTS) · doi:10.1109/dts52014.2021.9498259 · Cited by 3
Multi-Bit Read and Write Methodologies for Diode-STTRAM Crossbar ArrayPreprint
Khan, M. N. I., Ghosh, S., Aluru, R. K., & Jha, R. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1606.00470 · Cited by 3
“Several emerging non-volatile memory technologies have been proposed for crossbar array [6-9].”
BackgroundRelevance of Hidden Transients in the Steady State Memristor Measurements
Sakhuja, J., Kaushik, K., Saraswat, V., et al. (2024) · IEEE Electron Device Letters · doi:10.1109/led.2024.3463388 · Cited by 2
“Consequently, the maximum drive current for the selector device is based on the peak switching currents in RRAM [11], [12], [13].”
Zhu, M., Yao, C., Zhang, X., He, S., Cheng, B., & Zhao, J. (2024) · Journal of Applied Physics · doi:10.1063/5.0220511 · Cited by 4
Electronic threshold switching of As-embedded SiO2 selectors: charged oxygen vacancy model
Kim, H. R., Seok, T. J., Ha, T. J., Song, J. H., Dae, K. S., Lee, S. G., Choi, H. S., Park, S., Choi, B. J., Jang, J. H., et al. (2025) · Nano Convergence · doi:10.1186/s40580-025-00480-7 · Cited by 2
Self-citationCheng, C., Liu, K., Dang, B., Xu, L., Yang, Z., Yan, X., Yang, Y., & Huang, R. (2021) · IEEE Electron Devices Technology & Manufacturing Conference (EDTM) · doi:10.1109/edtm50988.2021.9421007 · Cited by 2
Read margin analysis of crossbar arrays using the cell-variability-aware simulation method
Sun, W., Choi, S., & Shin, H. (2017) · Solid-State Electronics · doi:10.1016/j.sse.2017.10.016 · Cited by 2
Memristive Computing Devices and Applications
Zidan, M. A., Chen, A., Indiveri, G., & Lu, W. D. (2021) · Kluwer international series in electronic materials: science and technology · doi:10.1007/978-3-030-42424-4_2 · Cited by 2
Self-citationEliminating Leakage in Volatile Memory with Anti-Ferroelectric TransistorsPreprint
Zhong, H., Zheng, Z., Jiao, L., Zhou, Z., Sun, C., Ma, X., Narayanan, V., Yang, H., Ni, K., Gong, X., et al. (2023) · Research Square · doi:10.21203/rs.3.rs-2744794/v1 · Cited by 2
Fedotov, M. I., Korotitsky, V. I., & Koveshnikov, S. (2024) · Nanomaterials · doi:10.3390/nano14080668 · Cited by 2
“(2) Selector resistance at a programming voltage (typically of 0.5 V to 1 V) should be in a range of 10 2 to 10 4 Ω , depending on the memory cell resistance in its low-resistance state (LRS) [23].”
BackgroundInfluentialChen, Y., Lin, C., Lin, C., & Lin, C.-H. (2025) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/adc3c1 · Cited by 1
Optimizing TiO2/HfO2 Multilayer RRAM for Self-Rectifying Characteristics
Nam, C.-H., & Baek, M.-H. (2025) · Micromachines · doi:10.3390/mi17010049 · Cited by 1
“By incorporating a selector layer directly into the RRAM cell, it achieves rectifying functionality without substantially increasing the array’s area, thus preserving the high integration density of the memory devices [5].”
Liu, H., Liao, H.-T., Li, M., Yang, N., Hsu, T., Zhao, R., Xu, Y., Kim, S. J., Ni, Y., Chenna, V., et al. (2026) · Nature Electronics · doi:10.1038/s41928-026-01704-2 · Cited by 2
Self-citationAn analysis of the read margin and power consumption of crossbar ReRAM arrays
Choi, S., Sun, W., Lim, H., & Shin, H. (2015) · IEEE Region 10 Conference (TENCON) · doi:10.1109/tencon.2015.7372853 · Cited by 1
Sun, W., Choi, S., Lim, H., & Shin, H. (2016) · Japanese Journal of Applied Physics · doi:10.7567/jjap.55.04ee10 · Cited by 1
A Write-Verification Method for Non-Volatile Memory
Zhang, Y., Zhu, C., Zhang, L., et al. (2019) · International Conference on IC Design and Technology · doi:10.1109/icicdt.2019.8790834 · Cited by 1
“Several researches have present some work in this field [3-5].”
BackgroundA Novel Resistive Memory-based Process-in-memory Architecture for Efficient Logic and Add Operations
Li, T., Wang, Q., Zhu, Y., Jiang, J., He, G., Jin, J., Mao, Z., & Jing, N. (2019) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3306495 · Cited by 1
“Typically, RM is set as 10% for a distinguishable read [59].”
BackgroundMulti-Bit Read and Write Methodologies for Diode-MTJ Crossbar Array
Khan, M. N. I., & Ghosh, S. (2020) · International Symposium on Quality Electronic Design (ISQED) · doi:10.1109/isqed48828.2020.9137015 · Cited by 1
“Selector Diodes (SD) such as Mixed Ionic Electronic Conduction (MIEC) [1], Metal-Insulator-Metal (MIM) tunneling [2], oxide heterojunction p-n, and Schottky diodes [3] for Resistive RAM (RRAM) have been extensively studied [4].”
BackgroundPre-Emphasis Pulse Design for Random-Access Memory
Sugiura, Y., & Tanzawa, T. (2021) · Electronics · doi:10.3390/electronics10121454 · Cited by 1
High throughput N-modular redundancy for error correction design of memristive stateful logic
Zhu, X. J., Xu, H., Yang, W., Li, Z., Liu, H., Liu, S., Wang, Y., & Long, H. (2022) · Chinese Physics B · doi:10.1088/1674-1056/ac8f38 · Cited by 1
Performance Limit and Coding Schemes for Resistive Random-Access Memory ChannelsPreprint
Song, G., Cai, K., Zhong, X., et al. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2005.02601 · Cited by 1
Ge1-Xsx Chalcogenide Alloys for Ots Applications Using Magnetron SputteringPreprint
Lee, M., Lee, S., Kim, M., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4159419 · Cited by 1
Cell-to-array thermal-aware analysis of stacked RRAM
Luo, Y., Ogrenci-Memik, S., & Gu, J. (2017) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2017.8050966
Threshold Switching and Self-Oscillation in Niobium Oxide
Li, S. (2018) · ANU Open Research (Australian National University) · doi:10.25911/5d69064ed3d25
Algorithm/Architecture Co-Design for Low-Power Neuromorphic Computing
Zheng, N. (2017) · Deep Blue (University of Michigan)
Multiphysics Simulation of Multifilamentary Conduction Resistive Random Access Memory
Xie, H., Zhang, S., Zhu, G., Yin, W., Chen, W., & Hu, J. X. (2019) · IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization · doi:10.1109/nemo.2019.8853829
Metadata
- Authors
- Kim, S., Zhou, J., & Lu, W. D.
- Affiliations
- University of Michigan (US)
- ORCID
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2014-08
- Volume
- 61
- Issue
- 8
- Pages
- 2820-2826
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2031559328
- Cited by
- 219
- References
- 40
- Citations by year
- 2026: 8 · 2025: 8 · 2024: 8 · 2023: 13 · 2022: 12 · 2021: 31 · 2020: 26 · 2019: 31 · 2018: 16 · 2017: 25 · 2016: 18 · 2015: 21 · 2014: 2
- FWCI
- 11.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Funders
- Air Force Office of Scientific Research, Arlington, VA, USA, through the Multidisciplinary University Research Initiative (FA9550-12-1-0038)
- National Science Foundation (ECCS-0954621)
- Basic Science Research Program through the Ministry of Education, Science and Technology, National Research Foundation of Korea (2013R1A6A3A03061299)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- resistive random access memory, crossbar arrays, selector devices, write operation, power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.