Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
The DOI matches its Crossref record; 35 of the 40 references it cites were found in a registry or an index.
Abstract
A comprehensive analysis of write operations (SET and RESET) in a resistance-change memory (resistive random access memory) crossbar array is carried out. Three types of resistive switching memory cells-nonlinear, rectifying-SET, and rectifying-RESET-are compared with each other in terms of voltage delivery, current delivery, and power consumption. Two different write schemes, V/2 and V/3, were considered, and the V/2 write scheme is preferred due to much lower power consumption. A simple numerical method was developed that simulates entire current flows and node voltages within a crossbar array and provides a quantitative tool for the accurate analysis of crossbar arrays and guidelines for developing reliable write operation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Memristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228 · cited 14×
“1(b) and (c) apply to both serially connected 1S1R cell structures, as well as RRAM cells with intrinsic nonlinear or self-rectifying behaviors, since the simulations 0018-9383 © 2014 IEEE.”
BackgroundMethodInfluentialComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Chen, A. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2013.2246791 · Cited by 230 · cited 1×
“Although several quantitative analyses of crossbar array architecture for read operation have been recently conducted [11]–[13], the study of the write operation for the three types of 1S1R systems has not yet been reported.”
BackgroundComplementary resistive switching in tantalum oxide-based resistive memory devices
Yang, Y., Sheridan, P., & Lu, W. (2012) · Applied Physics Letters · doi:10.1063/1.4719198 · Cited by 224
Self-citationLee, M., Kim, S. I., Lee, C. B., Yin, H., Ahn, S., Kang, B. S., Kim, K. H., Park, J. C., Kim, C. J., Song, I., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801032 · Cited by 217
Self-citationEngineering nonlinearity into memristors for passive crossbar applications
Joshua Yang, J., Zhang, M.-X., Pickett, M. D., Miao, F., Paul Strachan, J., Li, W.-D., Yi, W., Ohlberg, D. A. A., Joon Choi, B., Wu, W., et al. (2012) · Applied Physics Letters · doi:10.1063/1.3693392 · Cited by 214
Nanoscale resistive memory with intrinsic diode characteristics and long endurance
Kim, K.-H., Hyun Jo, S., Gaba, S., & Lu, W. (2010) · Applied Physics Letters · doi:10.1063/1.3294625 · Cited by 187
Self-citationBipolar Nonlinear $\hbox{Ni/TiO}_{2}\hbox{/}\hbox{Ni}$ Selector for 1S1R Crossbar Array Applications
Huang, J.-J., Tseng, Y.-M., Hsu, C.-W., & Hou, T.-H. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2161601 · Cited by 184
RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study
Deng, Y., Huang, P., Chen, B., Yang, X., Gao, B., Wang, J., Zeng, L., Du, G., Kang, J., & Liu, X. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2231683 · Cited by 184
CMOS/nano Co-design for crossbar-based molecular electronic systems
Ziegler, M. M., & Stan, M. R. (2003) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2003.820804 · Cited by 180
Fundamental analysis of resistive nano-crossbars for the use in hybrid Nano/CMOS-memory
Flocke, A., & Noll, T. G. (2007) · ESSCIRC 2007 - 33rd European Solid-State Circuits Conference · doi:10.1109/esscirc.2007.4430310 · Cited by 155
Gopalakrishnan, K., Shenoy, R. S., Rettner, C. T., Virwani, K. R., Bethune, D. S., Shelby, R. M., Burr, G. W., Kellock, A. J., King, R. S., Nguyen, K., et al. (2010) · Symposium on VLSI Technology · doi:10.1109/vlsit.2010.5556229 · Cited by 129
Electromigration characteristics of copper interconnects
Tao, J., Cheung, N. W., & Hu, C. C. (1993) · IEEE Electron Device Letters · doi:10.1109/55.215183 · Cited by 128
Hsu, C.-W., Wang, I., Lo, C., Chiang, M.-C., Jang, W.-Y., Lin, C.-H., & Hou, T. (2013) · Symposium on VLSI Technology · Cited by 124
Diode-less bilayer oxide (WOx–NbOx) device for cross-point resistive memory applications
Liu, X., Sadaf, S. M., Son, M., Shin, J., Park, J., Lee, J., Park, S., & Hwang, H. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/47/475702 · Cited by 98
Punchthrough-Diode-Based Bipolar RRAM Selector by Si Epitaxy
Srinivasan, V. S. S., Chopra, S., Karkare, P., Bafna, P., Lashkare, S., Kumbhare, P., Kim, Y., Srinivasan, S., Kuppurao, S., Lodha, S., et al. (2012) · IEEE Electron Device Letters · doi:10.1109/led.2012.2209394 · Cited by 97
Lo, C.-L., Hou, T.-H., Chen, M.-C., & Huang, J.-J. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2225147 · Cited by 91
Scaling constraints in nanoelectronic random-access memories
Amsinck, C. J., Spigna, N. H. D., Nackashi, D. P., & Franzon, P. D. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/047 · Cited by 81
Nanoscale (∼10nm) 3D vertical ReRAM and NbO2 threshold selector with TiN electrode
Cha, E., Woo, J., Lee, D., Lee, S., Song, J., Koo, Y., Lee, J., Park, C. G., Yang, M. Y., Kamiya, K., et al. (2013) · 2013 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2013.6724602 · Cited by 77
Complementary switching in metal oxides: Toward diode-less crossbar RRAMs
Nardi, F., Balatti, S., Larentis, S., & Ielmini, D. (2011) · 2011 International Electron Devices Meeting · doi:10.1109/iedm.2011.6131647 · Cited by 75
Virwani, K. R., Burr, G. W., Shenoy, R. S., Rettner, C. T., Padilla, A., Topuria, T., Rice, P. M., Ho, G. K., King, R. S., Nguyen, K., et al. (2012) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2012.6478967 · Cited by 73
A Novel Reference Scheme for Reading Passive Resistive Crossbar Memories
Mustafa, J., & Waser, R. (2006) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2006.885016 · Cited by 60
Shin, S., Kim, K., & Kang, S.-M. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2165690 · Cited by 56
Performance of threshold switching in chalcogenide glass for 3D stackable selector
Kim, S., Kim, Y.-B., Kim, K. M., Kim, S., Lee, S. R., Chang, M., Cho, E. J., Lee, M., Lee, D., Kim, C. J., et al. (2013) · Symposium on VLSI Technology · Cited by 55
Self-citationHsu, C.-W., Hou, T., Chen, M., et al. (2013) · IEEE Electron Device Letters · doi:10.1109/led.2013.2264823 · Cited by 46
Current Compliance-Dependent Nonlinearity in ${\rm TiO}_{2}$ ReRAM
Lentz, F., Rösgen, B., Rana, V., Wouters, D. J., & Waser, R. M. (2013) · IEEE Electron Device Letters · doi:10.1109/led.2013.2265715 · Cited by 41
A New Dynamic Selector Based on the Bipolar RRAM for the Crossbar Array Application
Huang, Y., Huang, R., Pan, Y., Zhang, L., Cai, Y., Yang, G., & Wang, Y. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2201158 · Cited by 41
Inherent diode isolation in programmable metallization cell resistive memory elements
Puthentheradam, S. C., Schroder, D. K., & Kozicki, M. N. (2011) · Applied Physics A · doi:10.1007/s00339-011-6292-5 · Cited by 40
Latch-up based bidirectional npn selector for bipolar resistance-change memory
Kim, S., Moon, D.-I., Lu, W. D., Kim, D. H., Kim, D. M., Choi, Y., & Choi, S. (2013) · Applied Physics Letters · doi:10.1063/1.4813832 · Cited by 31
Self-citationElectromechanical Diode Cell for Cross-Point Nonvolatile Memory Arrays
Kwon, W.-H., Jeon, J., Hutin, L., et al. (2011) · IEEE Electron Device Letters · doi:10.1109/led.2011.2174191 · Cited by 16
Research works printed but not linked: 1
- lee, 2012, Varistor-type bidirectional switch (JMAX> \( \sim {10^7}\) A/cm \( \sim {10^2}\) , selectivity \( \sim {10^4}\) ) for 3D bipolar resistive memory arrays, Proc Symp VLSIT, 37
Cited by
The future of electronics based on memristive systems
Zidan, M. A., Strachan, J. P., & Lu, W. D. (2018) · Nature Electronics · doi:10.1038/s41928-017-0006-8 · Cited by 2,138
Self-citationZahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
“Two types of architectures of ‘vertical’ and ‘crossbar RRAM’ have been proposed [116, 117]; however, both these architecture types require advanced fabrication procedures which is not desirable.”
BackgroundAnatomy of Ag/Hafnia‐Based Selectors with 1010 Nonlinearity
Midya, R., Wang, Z., Zhang, J., Savel'ev, S. E., Li, C., Rao, M., Jang, M. H., Joshi, S., Jiang, H., Lin, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604457 · Cited by 379
Compact Modeling of RRAM Devices and Its Applications in 1T1R and 1S1R Array Design
Chen, P.-Y., & Yu, S. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2492421 · Cited by 364
Threshold Switching of Ag or Cu in Dielectrics: Materials, Mechanism, and Applications
Wang, Z., Rao, M., Midya, R., Joshi, S., Jiang, H., Lin, P., Song, W., Asapu, S., Zhuo, Y., Li, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704862 · Cited by 360
Metadata
- Authors
- Kim, S., Zhou, J., & Lu, W. D.
- Affiliations
- University of Michigan (US)
- ORCID
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2014-08
- Volume
- 61
- Issue
- 8
- Pages
- 2820-2826
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2031559328
- Cited by
- 219
- References
- 40
- Citations by year
- 2026: 8 · 2025: 8 · 2024: 8 · 2023: 13 · 2022: 12 · 2021: 31 · 2020: 26 · 2019: 31 · 2018: 16 · 2017: 25 · 2016: 18 · 2015: 21 · 2014: 2
- FWCI
- 11.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Funders
- Air Force Office of Scientific Research, Arlington, VA, USA, through the Multidisciplinary University Research Initiative (FA9550-12-1-0038)
- National Science Foundation (ECCS-0954621)
- Basic Science Research Program through the Ministry of Education, Science and Technology, National Research Foundation of Korea (2013R1A6A3A03061299)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- resistive random access memory, crossbar arrays, selector devices, write operation, power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.