Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
The DOI matches its Crossref record; 35 of the 40 references it cites were found in a registry or an index.
Abstract
A comprehensive analysis of write operations (SET and RESET) in a resistance-change memory (resistive random access memory) crossbar array is carried out. Three types of resistive switching memory cells-nonlinear, rectifying-SET, and rectifying-RESET-are compared with each other in terms of voltage delivery, current delivery, and power consumption. Two different write schemes, V/2 and V/3, were considered, and the V/2 write scheme is preferred due to much lower power consumption. A simple numerical method was developed that simulates entire current flows and node voltages within a crossbar array and provides a quantitative tool for the accurate analysis of crossbar arrays and guidelines for developing reliable write operation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Memristive devices for computing
Yang, J. J., Strukov, D. B., & Stewart, D. R. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2012.240 · Cited by 3,885
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228 · cited 14×
“1(b) and (c) apply to both serially connected 1S1R cell structures, as well as RRAM cells with intrinsic nonlinear or self-rectifying behaviors, since the simulations 0018-9383 © 2014 IEEE.”
BackgroundMethodInfluentialComplementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Chen, A. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2013.2246791 · Cited by 230 · cited 1×
“Although several quantitative analyses of crossbar array architecture for read operation have been recently conducted [11]–[13], the study of the write operation for the three types of 1S1R systems has not yet been reported.”
BackgroundComplementary resistive switching in tantalum oxide-based resistive memory devices
Yang, Y., Sheridan, P., & Lu, W. (2012) · Applied Physics Letters · doi:10.1063/1.4719198 · Cited by 224
Self-citationLee, M., Kim, S. I., Lee, C. B., Yin, H., Ahn, S., Kang, B. S., Kim, K. H., Park, J. C., Kim, C. J., Song, I., et al. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801032 · Cited by 217
Self-citation
Research works printed but not linked: 1
- lee, 2012, Varistor-type bidirectional switch (JMAX> \( \sim {10^7}\) A/cm \( \sim {10^2}\) , selectivity \( \sim {10^4}\) ) for 3D bipolar resistive memory arrays, Proc Symp VLSIT, 37
Cited by
The future of electronics based on memristive systems
Zidan, M. A., Strachan, J. P., & Lu, W. D. (2018) · Nature Electronics · doi:10.1038/s41928-017-0006-8 · Cited by 2,138
Self-citationZahoor, F., Azni Zulkifli, T. Z., & Khanday, F. A. (2020) · Nanoscale Research Letters · doi:10.1186/s11671-020-03299-9 · Cited by 975
“Two types of architectures of ‘vertical’ and ‘crossbar RRAM’ have been proposed [116, 117]; however, both these architecture types require advanced fabrication procedures which is not desirable.”
BackgroundAnatomy of Ag/Hafnia‐Based Selectors with 1010 Nonlinearity
Midya, R., Wang, Z., Zhang, J., Savel'ev, S. E., Li, C., Rao, M., Jang, M. H., Joshi, S., Jiang, H., Lin, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604457 · Cited by 379
Compact Modeling of RRAM Devices and Its Applications in 1T1R and 1S1R Array Design
Chen, P.-Y., & Yu, S. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2492421 · Cited by 364
Threshold Switching of Ag or Cu in Dielectrics: Materials, Mechanism, and Applications
Wang, Z., Rao, M., Midya, R., Joshi, S., Jiang, H., Lin, P., Song, W., Asapu, S., Zhuo, Y., Li, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704862 · Cited by 360
A highly CMOS compatible hafnia-based ferroelectric diode
Luo, Q., Cheng, Y., Yang, J., Cao, R., Ma, H., Yang, Y., Huang, R., Wei, W., Zheng, Y., Gong, T., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15159-2 · Cited by 311
All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration
Sivan, M., Li, Y., Veluri, H., Zhao, Y., Tang, B., Wang, X., Zamburg, E., Leong, J. F., Niu, J. X., Chand, U., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-13176-4 · Cited by 209
Memristive Crossbar Arrays for Storage and Computing Applications
Li, H., Wang, S., Zhang, X., Wang, W., Yang, R., Sun, Z., Feng, W., Lin, P., Wang, Z., Sun, L., et al. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202100017 · Cited by 205
On‐Demand Reconfiguration of Nanomaterials: When Electronics Meets Ionics
Lee, J., & Lu, W. D. (2018) · Advanced Materials · doi:10.1002/adma.201702770 · Cited by 199
Self-citationElectronic system with memristive synapses for pattern recognition
Park, S., Chu, M., Kim, J., Noh, J., Jeon, M., Hun Lee, B., Hwang, H., Lee, B., & Lee, B.-G. (2015) · Scientific Reports · doi:10.1038/srep10123 · Cited by 181
“Generally, in memory applications 20 , this problem is easily solved using the half-bias scheme.”
MethodSelf-Selective Multi-Terminal Memtransistor Crossbar Array for In-Memory Computing
Feng, X., Li, S., Wong, S. L., Tong, S., Chen, L., Zhang, P., Wang, L., Fong, X., Chi, D., & Ang, K.-W. (2021) · ACS Nano · doi:10.1021/acsnano.0c09441 · Cited by 170
“32,33 The readout margin and power e ffi cient are simulated under three process feature size: (1) F = 400 nm for gold interconnect used in this work, (2) F = 50 nm for Cu interconnect used by industry today, and (3) F = 5 nm as projected by ITRS.”
MethodUltrahigh drive current and large selectivity in GeS selector
Jia, S., Li, H., Gotoh, T., Longeaud, C., Zhang, B., Lyu, J., Lv, S., Zhu, M., Song, Z., Liu, Q., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-18382-z · Cited by 161
Stochastic Memory Devices for Security and Computing
Carboni, R., & Ielmini, D. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201900198 · Cited by 145
“for cell read-out margin in pure memory applications [159], [160], [161].”
BackgroundThe challenges of modern computing and new opportunities for optics
Li, C., Zhang, X., Li, J., Fang, T., & Dong, X. (2021) · PhotoniX · doi:10.1186/s43074-021-00042-0 · Cited by 152
Very Low-Programming-Current RRAM With Self-Rectifying Characteristics
Zhou, J., Cai, F., Wang, Q., Chen, B., Gaba, S., & Lu, W. D. (2016) · IEEE Electron Device Letters · doi:10.1109/led.2016.2530942 · Cited by 122
Self-citationWrite Disturb in Ferroelectric FETs and Its Implication for 1T-FeFET AND Memory Arrays
Ni, K., Li, X., Smith, J. A., et al. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2872347 · Cited by 118
Parasitic Effect Analysis in Memristor-Array-Based Neuromorphic Systems
Jeong, Y., Zidan, M. A., & Lu, W. D. (2018) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2017.2784364 · Cited by 115
“line resistance Rline can be up to 10 for nanoscale devices [19], [21], [40]–[44].”
BackgroundSelf-citationMemristive Devices for New Computing Paradigms
Im, I. H., Kim, S. J., & Jang, H. W. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000105 · Cited by 129
Self-citation(2014) · doi:10.1109/ted.2015.2426717 · Cited by 110
“Besides the reduced sneak current, the 1S1R architecture can also adopt various array bias schemes to minimize overall read and program power consumption [9], [10], which provides additional benefits compared with the rectifying RRAM approach.”
MethodEngineering of defects in resistive random access memory devices
Banerjee, W., Liu, Q., & Hwang, H. (2020) · Journal of Applied Physics · doi:10.1063/1.5136264 · Cited by 116
A $\mu $ -Controller-Based System for Interfacing Selectorless RRAM Crossbar Arrays
Berdan, R., Serb, A., Khiat, A., Regoutz, A., Papavassiliou, C., & Prodromakis, T. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2433676 · Cited by 102
Ryu, J.-H., & Kim, S. (2020) · Chaos, Solitons & Fractals · doi:10.1016/j.chaos.2020.110236 · Cited by 87
Self-citationFuture of Non-Volatile Memory -From Storage to Computing-
Ishimaru, K. (2019) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm19573.2019.8993609 · Cited by 84
Feature Extraction Using Memristor Networks
Sheridan, P. M., Du, C., & Lu, W. D. (2016) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2015.2482220 · Cited by 79
Self-citationMemory applications from 2D materials
Chiang, C., Ostwal, V., Wu, P., Pang, C., Zhang, F., Chen, Z., & Appenzeller, J. (2021) · Applied Physics Reviews · doi:10.1063/5.0038013 · Cited by 88
Physical Unclonable Function Exploiting Sneak Paths in Resistive Cross-point Array
Gao, L., Chen, P.-Y., Liu, R., & Yu, S. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2578720 · Cited by 74
Bature, U. I., Khir, M. H. M., Nawi, I. M., Zakariya, M. A., & Zahoor, F. (2021) · IEEE Access · doi:10.1109/access.2021.3098061 · Cited by 72
A new opportunity for the emerging tellurium semiconductor: making resistive switching devices
Yang, Y., Xu, M., Jia, S., Wang, B., Xu, L., Wang, X., Liu, H., Liu, Y., Guo, Y., Wang, L., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-26399-1 · Cited by 73
Dongale, T. D., Kamble, G. U., Kang, D. Y., Kundale, S. S., An, H.-M., & Kim, T. G. (2021) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202100199 · Cited by 65
Memristive computing devices and applications
Zidan, M. A., Chen, A., Indiveri, G., & Lu, W. D. (2017) · Journal of Electroceramics · doi:10.1007/s10832-017-0103-0 · Cited by 68
Self-citationVolatile Resistive Switching Memory Based on Ag Ion Drift/Diffusion—Part II: Compact Modeling
Wang, W. J., Laudato, M., Ambrosi, E., Bricalli, A., Covi, E., Lin, Y., & Ielmini, D. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2928888 · Cited by 65
“2928890 sneak path currents and disturbs [4], [5].”
BackgroundYoo, J., Woo, J., Song, J., & Hwang, H. (2015) · AIP Advances · doi:10.1063/1.4938548 · Cited by 59
Memory selector devices and crossbar array design: a modeling-based assessment
Chen, A. (2017) · Journal of Computational Electronics · doi:10.1007/s10825-017-1059-7 · Cited by 59
Conduction mechanism of a TaO x -based selector and its application in crossbar memory arrays
Wang, M., Zhou, J., Yang, Y., Gaba, S., Liu, M., & Lu, W. D. (2015) · Nanoscale · doi:10.1039/c4nr06922f · Cited by 53
Self-citationUnderstanding the switching mechanism of interfacial phase change memory
Okabe, K. L., Sood, A., Yalon, E., Neumann, C. M., Asheghi, M., Pop, E., Goodson, K. E., & Wong, H. ‐. P. (2019) · Journal of Applied Physics · doi:10.1063/1.5093907 · Cited by 51
One-Selector One-Resistor Cross-Point Array With Threshold Switching Selector
Zhang, L., Cosemans, S., Wouters, D. J., Groeseneken, G., Jurczak, M., & Govoreanu, B. (2015) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2015.2461656 · Cited by 51
A Novel Read Scheme for Large Size One-Resistor Resistive Random Access Memory Array
Zackriya, V. M., Kittur, H. M., & Chin, A. (2017) · Scientific Reports · doi:10.1038/srep42375 · Cited by 50
Su, Y., Wang, M.-C., Zhang, S., et al. (2018) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2018.2805285 · Cited by 51
Electro-Thermal Model of Threshold Switching in TaO x -Based Devices
Goodwill, J. M., Sharma, A. A., Li, D., Bain, J. A., & Skowroński, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16559 · Cited by 53
Self-Rectifying Al 2 O 3 /TaO x Memristor With Gradual Operation at Low Current by Interfacial Layer
Zhao, X., Zhang, K., Hu, K., Zhang, Y., Zhou, Q., Wang, Z., She, Y., Zhang, Z., & Wang, F. (2021) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2021.3120701 · Cited by 47
Programmable Threshold Logic Implementations in a Memristor Crossbar Array
Youn, S., Lee, J., Kim, S., Park, J., Kim, K., & Kim, H. (2024) · Nano Letters · doi:10.1021/acs.nanolett.3c04073 · Cited by 47
Self-citationAn FPGA-Based Hardware Emulator for Neuromorphic Chip With RRAM
Luo, T., Wang, X., Qu, C., Lee, M. K. F., Tang, W. T., Wong, W., & Goh, R. S. M. (2018) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2018.2889670 · Cited by 48
Liu, R., Mahalanabis, D., Barnaby, H., & Yu, S. (2015) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2015.2465164 · Cited by 43
“To write the data into the crossbar array, the 1/2 V scheme is widely used [34].”
MethodKim, J. P., Kim, S. K., Park, S., Kuk, S., Kim, T.-Y., Kim, B. H., Ahn, S., Cho, Y., Jeong, Y., Choi, S., et al. (2023) · Nano Letters · doi:10.1021/acs.nanolett.2c03453 · Cited by 45
Self-citationVO2 -Based Selection Device for Passive Resistive Random Access Memory Application
Zhang, K., Wang, B., Wang, F., et al. (2016) · IEEE Electron Device Letters · doi:10.1109/led.2016.2582259 · Cited by 43
Zhou, X. Y., Zhao, L., Yan, C., Zhen, W., Lin, Y., Li, L., Du, G., Lu, L., Zhang, S., Lu, Z., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-39033-z · Cited by 52
Recent Progress in Memrsitor Array Structures and Solutions for Sneak Path Current Reduction
Lee, Y., Jeon, B., Cho, Y., Kim, J., Shim, W., & Kim, S. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400585 · Cited by 48
Self-citationYoon, K. J., Bae, W., Jeong, D., & Hwang, C. S. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600326 · Cited by 42
Challenges and Opportunities: From Near-memory Computing to In-memory Computing
Khoram, S., Zha, Y., Zhang, J., & Li, J. (2017) · International Symposium on Physical Design · doi:10.1145/3036669.3038242 · Cited by 61
Ultralow Sub-1-nA Operating Current Resistive Memory With Intrinsic Non-Linear Characteristics
Gaba, S., Cai, F., Zhou, J., & Lu, W. D. (2014) · IEEE Electron Device Letters · doi:10.1109/led.2014.2363618 · Cited by 39
Self-citationNumerical study of read scheme in one-selector one-resistor crossbar array
Kim, S., Kim, H., & Choi, S. (2015) · Solid-State Electronics · doi:10.1016/j.sse.2015.08.001 · Cited by 36
Self-citationZhao, Y., Huang, P. C., Chen, Z., Liu, C., Li, H., Chen, B., Ma, W., Zhang, F., Gao, B., Liu, X., et al. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2532470 · Cited by 38
Dual-Layer Selector With Excellent Performance for Cross-Point Memory Applications
Lin, Q., Li, Y., Xu, M., Cheng, Q., Qian, H., Feng, J., Tong, H., & Miao, X. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2808465 · Cited by 36
Correll, J. M., Bothra, V., Cai, F., Lim, Y., Lee, S. H., Lee, S., Lu, W. D., Zhang, Z., & Flynn, M. P. (2020) · IEEE Journal on Exploratory Solid-State Computational Devices and Circuits · doi:10.1109/jxcdc.2020.2992228 · Cited by 36
Self-citationCrossbar array of selector-less TaOx/TiO2 bilayer RRAM
Chou, C.-T., Hudec, B., Hsu, C.-W., Lai, W.-L., Chang, C.-C., & Hou, T. (2015) · Microelectronics Reliability · doi:10.1016/j.microrel.2015.04.002 · Cited by 37
Bae, W., Yoon, K. J., Hwang, C. S., & Jeong, D. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/48/485201 · Cited by 35
“Moreover, line resistance of 2.4 Ω / cell is also included in the simulation [ 12, 31 ] .”
BackgroundInfluentialA high performance electroformed single-crystallite VO 2 threshold switch
Zhou, X., Gu, D., Li, Y., Qin, H., Jiang, Y., & Xu, J. M. (2019) · Nanoscale · doi:10.1039/c9nr08364b · Cited by 37
Levisse, A., Giraud, B., Noël, J.-P., Moreau, M., & Portal, J. (2015) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2015.7457426 · Cited by 36
“During a read or write operation in a crossbar array, SP currents degrade the operation efficiency (read margin reduction and write current control reduction) [12] [13].”
BackgroundFerroelectric capacitive memories: devices, arrays, and applications
Zhou, Z., Jiao, L., Zheng, Z., Chen, Y., Han, K., Kang, Y., Zhang, D., Wang, X., Kong, Q., Sun, C., et al. (2025) · Nano Convergence · doi:10.1186/s40580-024-00463-0 · Cited by 39
Cross-point Resistive Memory: Nonideal Properties and Solutions
Wang, C., Feng, D., Tong, W., Liu, J., Li, Z., Chang, J., Zhang, Y., Wu, B., Xu, J., Zhao, W. J., et al. (2019) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3325067 · Cited by 40
“(e) Comparisons under the same line connection scheme [18, 20, 92].”
BackgroundElectrothermal Characterization in 3-D Resistive Random Access Memory Arrays
Luo, Y., Chen, W., Cheng, M., & Yin, W. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2615864 · Cited by 33
Zhu, G., Chen, W., Wang, D., Xie, H., Zhao, Z., Gao, P., Schutt‐Ainé, J. E., & Yin, W.-Y. (2019) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2901030 · Cited by 33
“The resistive random access memory (RRAM) is one of the most promising candidates because of its low operating voltage, fast read/write speed, long retention time, and high scalability [5]–[8].”
BackgroundPerspective: Uniform switching of artificial synapses for large-scale neuromorphic arrays
Tan, S. H., Lin, P., Yeon, H., Choi, S., Park, Y., & Kim, J. (2018) · APL Materials · doi:10.1063/1.5049137 · Cited by 33
Performance Limit and Coding Schemes for Resistive Random-Access Memory Channels
Song, G., Cai, K., Zhong, X., et al. (2021) · IEEE Transactions on Communications · doi:10.1109/tcomm.2021.3051413 · Cited by 29
Gao, Y., Kavehei, O., Al-Sarawi, S. F., Ranasinghe, D. C., & Abbott, D. (2016) · Integration · doi:10.1016/j.vlsi.2016.02.002 · Cited by 32
Device and Circuit Interaction Analysis of Stochastic Behaviors in Cross-Point RRAM Arrays
Li, H., Huang, P., Gao, B., Liu, X., Kang, J., & Wong, H. ‐. P. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2766046 · Cited by 32
Self-Limited and Forming-Free CBRAM Device With Double Al2O3 ALD Layers
Shin, J. H., Wang, Q., & Lu, W. D. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2868459 · Cited by 28
“Low programming current helps mitigate the series resistance issue and reduces the operation power [12], while nonlinear I-V characteristics in low resistance state (LRS) helps mitigate sneak currents [13], [14].”
BackgroundMethodSelf-citationWald, N., & Kvatinsky, S. (2019) · Microelectronics Journal · doi:10.1016/j.mejo.2019.02.013 · Cited by 29
A neuromorphic ASIC design using one-selector-one-memristor crossbar
Yan, B., Mahmoud, A. M., Yang, J. J., Wu, Q., Chen, Y., & Li, H. H. (2016) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2016.7527509 · Cited by 28
Zhang, L., Cosemans, S., Wouters, D. J., Groeseneken, G., Jurczak, M., & Govoreanu, B. (2015) · IEEE Electron Device Letters · doi:10.1109/led.2015.2427313 · Cited by 26
Narayanan, P., Burr, G. W., Shenoy, R. S., Stephens, S., Virwani, K. R., Padilla, A., Kurdi, B. N., & Gopalakrishnan, K. (2015) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2015.2442242 · Cited by 26
A 2M1M Crossbar Architecture: Memory
Teimoory, M., Amirsoleimani, A., Ahmadi, A., & Ahmadi, M. (2018) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2018.2799951 · Cited by 25
Ge1−xSx chalcogenide alloys for OTS applications using magnetron sputtering
Lee, M., Lee, S., Kim, M., et al. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.167409 · Cited by 24
Kim, M., & Kim, S. (2024) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.4c00428 · Cited by 29
Self-citationTa2O5-y-based ReRAM device with annealing-free Ag:ZrNx-based bilayer selector device
Kim, D., Park, J. H., Jeon, D. S., Dongale, T. D., & Kim, T. G. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.157261 · Cited by 25
Device‐to‐Materials Pathway for Electron Traps Detection in Amorphous GeSe‐Based Selectors
Slassi, A., Medondjio, L., Padovani, A., Tavanti, F., He, X., Clima, S., Garbin, D., Kaczer, B., Larcher, L., Ordejón, P., et al. (2023) · Advanced Electronic Materials · doi:10.1002/aelm.202201224 · Cited by 24
Scaling behavior of oxide-based electrothermal threshold switching devices
Li, D., Goodwill, J. M., Bain, J. A., et al. (2017) · Nanoscale · doi:10.1039/c7nr03865h · Cited by 23
Architecture, design and technology guidelines for crosspoint memories
Levisse, A., Royer, P., Giraud, B., Noel, J. P., Moreau, M., & Portal, J. M. (2017) · IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH) · doi:10.1109/nanoarch.2017.8053733 · Cited by 22
Shen, M., Shen, S., Jia, Y., Liu, Y., Zhang, P., Xie, M., Wei, J., & Yang, R. (2024) · ACS Nano · doi:10.1021/acsnano.4c09421 · Cited by 21
Solution-Processed Complementary Resistive Switching Arrays for Associative Memory
Smith, J. N., Chung, S., Jang, J., Biaou, C., & Subramanian, V. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2732920 · Cited by 21
“To assess the feasibility of scaling printed CRS arrays to N × N larger than N = 2, we have used a resistor network model that is commonly employed in the literature for RRAM and CRS memory [16], [34], [35].”
MethodPark, Y. R., & Wang, G. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202307971 · Cited by 23
A high-speed MIM resistive memory cell with an inherent vanadium selector
Lin, C.-Y., Tseng, Y., Chen, P., Chang, T., Eshraghian, J. K., Wang, Q., Lin, Q., Tan, Y., Tai, M., Hung, W., et al. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100848 · Cited by 20
Self-citationSignal and Thermal Integrity Analysis of 3-D Stacked Resistive Random Access Memories
Zayer, F., Lahbacha, K., Melnikov, A. V., et al. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.3036574 · Cited by 21
“Other proposed solutions are based on advanced bias schemes, such as, for instance, the 1/3 bias scheme that enables a larger read margin or the 1/2 one that leads to a lower power consumption [14], [15].”
BackgroundBae, D., Lee, D., Jung, J.-S., Kim, S., & Kim, H. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.04.212 · Cited by 20
Self-citationWang, C., Feng, D., Liu, J., Tong, W., Wu, B., & Zhang, Y. (2017) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd.2017.50 · Cited by 21
“Due to the negative exponential relationship between the voltage drop across RRAM cell and its switching time [3], [4], the write latency of each cell differs greatly within the array, even in the same row [8], [14], [15], [21], [22].”
BackgroundMethodInfluentialInvestigating Selectorless Property within Niobium Devices for Storage Applications
Chen, P., Lin, C.-Y., Chang, T., Eshraghian, J. K., Chao, Y.-T., Lu, W. D., & Sze, S. M. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c20460 · Cited by 20
Self-citationCONCEPT: A Co lum n -Oriented Memory C ontroller for E fficient Memory and P IM Opera t ions in RRAM
Talati, N., Ha, H., Perach, B., Ronen, R., & Kvatinsky, S. (2019) · IEEE Micro · doi:10.1109/mm.2018.2890033 · Cited by 23
Sakellaropoulos, D., Bousoulas, P., Papakonstantinopoulos, C., Kitsios, S., & Tsoukalas, D. (2020) · IEEE Electron Device Letters · doi:10.1109/led.2020.2997565 · Cited by 26
“Such low read voltages could lead to potential read disturb issues in high temperature operation, but we could overcome this by embedding higher density NCs, threshold switching elements or selectors [17], all in the scope of our future studies.”
BackgroundExtension of Two-Port Sneak Current Cancellation Scheme to 3-D Vertical RRAM Crossbar Array
Bae, W., Yoon, K. J., Hwang, C. S., & Jeong, D.-K. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2664863 · Cited by 15
Huang, P. C., Chen, S., Zhao, Y., Chen, B., Gao, B., Liu, L., Chen, Y., Zhang, Z., Bu, W., Wu, H., et al. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2612824 · Cited by 17
“14 [36], [37].”
Implementation of a Binary Neural Network on a Passive Array of Magnetic Tunnel Junctions
Goodwill, J. M., Prasad, N., Hoskins, B. D., Daniels, M. W., Madhavan, A., Wan, L., Santos, T., Tran, M., Katine, J. A., Braganca, P. M., et al. (2022) · IEEE Magnetic Recording Conference (TMRC) · doi:10.1103/physrevapplied.18.014039 · Cited by 24
Nonlinearity analysis of TaOX redox-based RRAM
Kim, W., Rösgen, B., Breuer, T., Menzel, S., Wouters, D. J., Waser, R. M., & Rana, V. (2016) · Microelectronic Engineering · doi:10.1016/j.mee.2016.01.025 · Cited by 16
Resistive switching properties for fluorine doped titania fabricated using atomic layer deposition
Kim, M., Wang, Y., Kim, D., Shao, Q., Lee, H., & Park, H. (2022) · APL Materials · doi:10.1063/5.0076669 · Cited by 16
Back‐End‐of‐Line Integration of Synaptic Weights using HfO2/ZrO2 Nanolaminates
Bégon‐Lours, L., Slesazeck, S., Falcone, D. F., et al. (2024) · Advanced Electronic Materials · doi:10.1002/aelm.202300649 · Cited by 15
Modeling and Simulation of Resistive Random Access Memory With Graphene Electrode
Xie, H., Chen, W., Zhang, S., Zhu, G., Khaliq, A., Hu, J. X., & Yin, W. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2020.2965182 · Cited by 16
Woo, J., & Yu, S. (2018) · IEEE Electron Device Letters · doi:10.1109/led.2018.2821093 · Cited by 14
Fu, Y., Huang, C.-C., & Wang, J. (2019) · Microelectronic Engineering · doi:10.1016/j.mee.2019.111033 · Cited by 14
Kim, S., Choi, B., Yoon, J., Lee, Y., Kim, H., Kang, M., & Choi, S. (2019) · Scientific Reports · doi:10.1038/s41598-019-48048-w · Cited by 16
Self-citationBae, W., & Yoon, K. J. (2020) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2020.3006114 · Cited by 14
“Several write/read margin analyses for memristor CBAs have been reported, however, none of them takes into account the noise generation of the memristor [13]–[16].”
BackgroundWang, C., Feng, D., Tong, W., Liu, J., Wu, B., Zhao, W. J., Zhang, Y., & Chen, Y. (2020) · IEEE Transactions on Computers · doi:10.1109/tc.2020.2990884 · Cited by 15
“We choose 1/2 bias scheme because it consumes less power than the 1/3 counterpart for large array size [18].”
Method
Metadata
- Authors
- Kim, S., Zhou, J., & Lu, W. D.
- Affiliations
- University of Michigan (US)
- ORCID
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2014-08
- Volume
- 61
- Issue
- 8
- Pages
- 2820-2826
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2031559328
- Cited by
- 219
- References
- 40
- Citations by year
- 2026: 8 · 2025: 8 · 2024: 8 · 2023: 13 · 2022: 12 · 2021: 31 · 2020: 26 · 2019: 31 · 2018: 16 · 2017: 25 · 2016: 18 · 2015: 21 · 2014: 2
- FWCI
- 11.68
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Funders
- Air Force Office of Scientific Research, Arlington, VA, USA, through the Multidisciplinary University Research Initiative (FA9550-12-1-0038)
- National Science Foundation (ECCS-0954621)
- Basic Science Research Program through the Ministry of Education, Science and Technology, National Research Foundation of Korea (2013R1A6A3A03061299)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Keywords
- resistive random access memory, crossbar arrays, selector devices, write operation, power consumption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.