The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Monitoring Solder Fatigue in a Power Module Using Case-Above-Ambient Temperature Rise
Abstract
Condition monitoring is needed in power electronic systems as a cost-effective means of improving reliability. Packaging-related solder fatigue has been identified as one of the main root causes of power electronic module failures. This paper presents a method to monitor solder fatigue inside a module by identifying the increase of internal thermal resistance due to that solder fatigue, taking account of the masking effect of the variable operating point. It is assumed that the total loss in the module increases as junction temperature rises, causing an increase in case-above-ambient temperature rise, which can be measured. A dynamic thermal model of the heat sink is utilized to estimate the power loss from temperature measurements, while a device power loss model is developed to estimate the internal thermal resistance by considering the converter electrical loading. Experiment and simulation are used to demonstrate the concept and verify the method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278 · cited 1×
“Packaging-related solder fatigue is a main root cause of intelligent power module (IPM) failures [3], [9], [10] and can happen in the solder layer between the chip and substrate or between the substrate and baseplate.”
BackgroundSelf-citationSelected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
Self-citation
Cited by
Oh, H., Han, B., McCluskey, P., Han, C., & Youn, B. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2346485 · Cited by 513
A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters
Peng, Y., Zhao, S., & Wang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3009600 · Cited by 305
Hanif, A., Yu, Y., DeVoto, D., & Khan, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2860587 · Cited by 272
Kim, D., Nagao, S., Chen, C., Wakasugi, N., Yamamoto, Y., Suetake, A., Takemasa, T., Sugahara, T., & Suganuma, K. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3031670 · Cited by 87
A Practical On-Board SiC MOSFET Condition Monitoring Technique for Aging Detection
Pu, S., Yang, F., Vankayalapati, B. T., Ugur, E., Xu, C., & Akin, B. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.2980220 · Cited by 75
Metadata
- Authors
- Xiang, D., Ran, L., Tavner, P., Bryant, A., Yang, S., & Mawby, P.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2011-11
- Volume
- 47
- Issue
- 6
- Pages
- 2578-2591
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2142790790
- Cited by
- 193
- References
- 3
- FWCI
- 4.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.