The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
High-Efficiency Isolated Boost DC–DC Converter for High-Power Low-Voltage Fuel-Cell Applications
Abstract
A new design approach achieving very high conversion efficiency in low-voltage high-power isolated boost dc-dc converters is presented. The transformer eddy-current and proximity effects are analyzed, demonstrating that an extensive interleaving of primary and secondary windings is needed to avoid high winding losses. The analysis of transformer leakage inductance reveals that extremely low leakage inductance can be achieved, allowing stored energy to be dissipated. Power MOSFETs fully rated for repetitive avalanches allow primary-side voltage clamp circuits to be eliminated. The oversizing of the primary-switch voltage rating can thus be avoided, significantly reducing switch-conduction losses. Finally, silicon carbide rectifying diodes allow fast diode turn-off, further reducing losses. Detailed test results from a 1.5-kW full-bridge boost dc-dc converter verify the theoretical analysis and demonstrate very high conversion efficiency. The efficiency at minimum input voltage and maximum power is 96.8%. The maximum efficiency of the proposed converter is 98%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effects of eddy currents in transformer windings
Dowell, P. L. (1966) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1966.0236 · Cited by 1,438
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Boost Converter With Coupled Inductors and Buck–Boost Type of Active Clamp
Wu, T.-F., Lai, Y.-S., Hung, J.-C., & Chen, Y.-M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.903925 · Cited by 425
Soft ferrites: properties and applications
Snelling, E. C. (1969) · CERN Document Server (European Organization for Nuclear Research) · Cited by 415
Zhu, L. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.869730 · Cited by 381
Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms
Hurley, W. G., Gath, E., & Breslin, J. G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838110 · Cited by 368
A bidirectional DC–DC converter for fuel cell electric vehicle driving system
Chiu, H.-J., & Lin, L.-W. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.876863 · Cited by 327
Fontes, G., Turpin, C., Astier, S., & Meynard, T. A. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.890008 · Cited by 320
A ZVS Bidirectional DC–DC Converter With Phase-Shift Plus PWM Control Scheme
Xiao, H., & Xie, S. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915188 · Cited by 299
Harfman Todorovic, M., Palma, L., & Enjeti, P. N. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911200 · Cited by 263
Fuel cell high-power applications
Sethakul, P., Rael, S., Davat, B., & Thounthong, P. (2009) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2008.930365 · Cited by 208
Bi-directional DC to DC converters for fuel cell systems
Wang, K., Lin, C. Y., Zhu, L., Qu, D., Lee, F. C., & Lai, J. S. (2002) · Power Electronics in Transportation (Cat. No.98TH8349) · doi:10.1109/pet.1998.731056 · Cited by 208
A Three-Phase Current-Fed DC/DC Converter With Active Clamp for Low-DC Renewable Energy Sources
Cha, H., Choi, J., & Enjeti, P. N. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2003256 · Cited by 113
New start-up schemes for isolated full-bridge boost converters
Zhu, L., Wang, K., Lee, F. C., & Lai, J. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.813758 · Cited by 113
Current-Fed Resonant Full-Bridge Boost DC/AC/DC Converter
Jałbrzykowski, S., & Citko, T. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.909084 · Cited by 100
An Integrated Magnetic Isolated Two-Inductor Boost Converter: Analysis, Design and Experimentation
Yan, L., & Lehman, B. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.843004 · Cited by 95
Wang, K., Zhu, L., Qu, D., Odendaal, H., Lai, J., & Lee, F. C. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2000.879959 · Cited by 87
Current-Fed Dual-Bridge DC–DC Converter
Song, W., & Lehman, B. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889927 · Cited by 73
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Zhao, B., Yu, Q., & Sun, W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2180928 · Cited by 932
Biela, J., Schweizer, M., Waffler, S., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072896 · Cited by 892
Quasi-Z-Source-Based Isolated DC/DC Converters for Distributed Power Generation
Vinnikov, D., & Roasto, I. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2039460 · Cited by 398
Optimal Design and Tradeoff Analysis of Planar Transformer in High-Power DC–DC Converters
Ouyang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046005 · Cited by 393
Self-citation
Metadata
- Authors
- Nymand, M., & Andersen, M. A. E.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-02
- Volume
- 57
- Issue
- 2
- Pages
- 505-514
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2115103856
- Cited by
- 312
- References
- 18
- FWCI
- 15.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.