The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Novel High Step-Up DC–DC Converter for Distributed Generation System
Abstract
In this paper, a novel high step-up dc–dc converter for distributed generation systems is proposed. The concept is to utilize two capacitors and one coupled inductor. The two capacitors are charged in parallel during the switch-off period and are discharged in series during the switch-on period by the energy stored in the coupled inductor to achieve a high step-up voltage gain. In addition, the leakage-inductor energy of the coupled inductor is recycled with a passive clamp circuit. Thus, the voltage stress on the main switch is reduced. The switch with low resistance$R_{\rm DS(ON)}$can be adopted to reduce the conduction loss. In addition, the reverse-recovery problem of the diodes is alleviated, and thus, the efficiency can be further improved. The operating principle and steady-state analyses are discussed in detail. Finally, a prototype circuit with 24-V input voltage, 400-V output voltage, and 200-W output power is implemented in the laboratory to verify the performance of the proposed converter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916403 · Cited by 1,379
Mohamed, Y., & El-Saadany, E. F. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005100 · Cited by 1,230
Li, Y. W., & Kao, C.-N. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2022828 · Cited by 1,127
High-efficiency, high step-up DC-DC converters
Zhao, Q., & Lee, F. C. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.807188 · Cited by 1,015
Evaluation of Current Controllers for Distributed Power Generation Systems
Timbus, A., Liserre, M., Teodorescu, R., Rodriguez, P., & Blaabjerg, F. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2012527 · Cited by 934
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
Self-citationDesign, Analysis, and Real-Time Testing of a Controller for Multibus Microgrid System
Li, Y., Vilathgamuwa, D. M., & Loh, P. C. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.833456 · Cited by 723
High Step-Up Converter With Coupled-Inductor
Wai, R.-J., & Duan, R.-Y. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854023 · Cited by 611
Novel high-efficiency step-up converter
Tseng, K. C., & Liang, T. J. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040022 · Cited by 435
Self-citationBoost Converter With Coupled Inductors and Buck–Boost Type of Active Clamp
Wu, T.-F., Lai, Y.-S., Hung, J.-C., & Chen, Y.-M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.903925 · Cited by 425
Design of Parallel Inverters for Smooth Mode Transfer Microgrid Applications
Chen, C.-L., Wang, Y., Lai, J.-S., Lee, Y.-S., & Martin, D. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2025864 · Cited by 382
Negative-Sequence Current Injection for Fast Islanding Detection of a Distributed Resource Unit
Karimi, H., Yazdani, A., & Iravani, R. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.911774 · Cited by 377
Novel High Step-Up DC–DC Converter for Fuel Cell Energy Conversion System
Changchien, S.-K., Liang, T., Chen, J.-F., & Yang, L.-S. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026364 · Cited by 369
Self-citationPositive output super-lift converters
Luo, F. L., & Ye, H. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.807198 · Cited by 349
Analysis of integrated boost-flyback step-up converter
Liang, T. J., & Tseng, K. C. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045003 · Cited by 263
Self-citationHigh boost converter using voltage multiplier
Baek, J.-W., Ryoo, M.-H., Kim, T.-J., Yoo, D.-W., & Kim, J.-S. (2005) · 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005. · doi:10.1109/iecon.2005.1568967 · Cited by 219
High-efficiency DC/DC converter with high voltage gain
Wai, R. J., & Duan, R. Y. (2005) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20045067 · Cited by 206
Active Voltage Clamp in Flyback Converters Operating in CCM Mode Under Wide Load Variation
Papanikolaou, N. P., & Tatakis, E. C. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825342 · Cited by 199
Six self-lift DC-DC converters, voltage lift technique
Luo, F. L. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969408 · Cited by 158
Soft-Switching Zeta–Flyback Converter With a Buck–Boost Type of Active Clamp
Lin, B., & Hsieh, F.-Y. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.901366 · Cited by 147
Wai, R., Liu, L., & Duan, R.-Y. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.862251 · Cited by 106
Assessing the Impact of SiC MOSFETs on Converter Interfaces for Distributed Energy Resources
Carr, J., Hotz, D., Balda, J. C., Mantooth, H. A., Ong, A., & Agarwal, A. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005500 · Cited by 78
A High Step-Up DC-DC Converter Based on Three-State Switching Cell
Torrico-Bascopé, G. V., Vasconcelos, S., Torrico-Bascope, R. P., Antunes, F. L. M., Oliveira, D. S., & Branco, C. G. C. (2006) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2006.295772 · Cited by 74
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Nonisolated High Step-Up DC–DC Converters Adopting Switched-Capacitor Cell
Wu, G., Ruan, X., & Ye, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327000 · Cited by 408
Ajami, A., Ardi, H., & Farakhor, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2360495 · Cited by 406
Metadata
- Authors
- Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-04
- Volume
- 60
- Issue
- 4
- Pages
- 1473-1482
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1989603168
- Cited by
- 295
- References
- 23
- FWCI
- 6.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.