The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
High-Misalignment Tolerant Compensation Topology For ICPT Systems
Abstract
Inductively coupled power transfer systems (ICPT) are an interesting alternative to conductive solutions for vehicle battery charge, particularly in electric public transport applications if operator-free fast charge is required along the route. To perform this task using ICPT systems, current solutions require an almost perfect alignment between coils in order to have optimal power transfer. This condition makes necessary a precise positioning maneuver from the driver or an electromechanic alignment system for the secondary winding, causing the process to be slow. This paper shows that it is possible to transfer rated power even with high misalignment if a suitable compensation topology is selected. The performance of the four basic compensation topologies is analyzed, and a series–parallel–series (SPS) topology is proposed, showing a suitable behavior for both the load and the power source. The theoretical results are validated in two series–series and SPS 2-kW prototypes with a 15-cm air gap between coils.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sample, A. P., Meyer, D. A., & Smith, J. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046002 · Cited by 1,808
Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge
Sallan, J., Villa, J. L., Llombart, A., & Sanz, J. F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015359 · Cited by 734
Self-citationLow, Z. N., Chinga, R. A., Tseng, R., & Lin, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010110 · Cited by 528
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
10 kHz inductively coupled power transfer - concept and control
Green, A. W. (1994) · Proceedings of 5th International Conference on Power Electronics and Variable-Speed Drives · doi:10.1049/cp:19941049 · Cited by 300
Contactless Energy Transfer System With FPGA-Controlled Resonant Converter
Moradewicz, A. J., & Kazmierkowski, M. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051395 · Cited by 270
Optimal Design of a Hybrid Winding Structure for Planar Contactless Battery Charging Platform
Liu, X., & Hui, S. Y. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.911844 · Cited by 247
Compact contactless power transfer system for electric vehicles
Nagatsuka, Y., Ehara, N., Kaneko, Y., Abe, S., & Yasuda, T. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5543313 · Cited by 245
Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer Systems
Elliott, G., Raabe, S., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031184 · Cited by 234
Interphase Mutual Inductance in Polyphase Inductive Power Transfer Systems
Kissin, M. L. G., Boys, J. T., & Covic, G. A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2020076 · Cited by 165
Cited by
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
A review of wireless power transfer for electric vehicles: Prospects to enhance sustainable mobility
Bi, Z., Kan, T., Mi, C. C., Zhang, Y., Zhao, Z., & Keoleian, G. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.003 · Cited by 485
Review of static and dynamic wireless electric vehicle charging system
Panchal, C., Stegen, S., & Lu, J. (2018) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2018.06.015 · Cited by 414
Comparison Study on SS and Double-Sided LCC Compensation Topologies for EV/PHEV Wireless Chargers
Li, W., Zhao, H., Deng, J., Li, S., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2479938 · Cited by 375
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Maximizing DC-to-Load Efficiency for Inductive Power Transfer
Pinuela, M., Yates, D. C., Lucyszyn, S., & Mitcheson, P. D. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2215887 · Cited by 354
Feng, H., Cai, T., Duan, S., Zhao, J., Zhang, X., & Chen, C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2589922 · Cited by 350
Li, W., Zhao, H., Li, S., Deng, J., Kan, T., & Mi, C. C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2384003 · Cited by 331
Hybrid Bidirectional Wireless EV Charging System Tolerant to Pad Misalignment
Zhao, L., Thrimawithana, D. J., & Madawala, U. K. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686301 · Cited by 328
Wireless Power Transmission With Self-Regulated Output Voltage for Biomedical Implant
Ahn, D., & Hong, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273472 · Cited by 315
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
Wireless Power Transfer by Electric Field Resonance and Its Application in Dynamic Charging
Li, S., Liu, Z., Zhao, H., Zhu, L., Shuai, C., & Chen, Z. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2577625 · Cited by 262
Applying LCC Compensation Network to Dynamic Wireless EV Charging System
Zhu, Q., Wang, L., Guo, Y., Liao, C., & Li, F. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2529561 · Cited by 254
Azad, A. N., Echols, A., Kulyukin, V. A., Zane, R., & Pantic, Z. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2870339 · Cited by 125
Al-Saadi, M., Ibrahim, A., Al-Omari, A., Al-Gizi, A., & Craciunescu, A. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.02.236 · Cited by 26
Metadata
- Authors
- Villa, J. L., Sallan, J., Sanz Osorio, J. F., & Llombart, A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2012-02
- Volume
- 59
- Issue
- 2
- Pages
- 945-951
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2099304692
- Cited by
- 467
- References
- 13
- FWCI
- 7.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.