The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Effect of Coupling Between Multiple Transmitters or Multiple Receivers on Wireless Power Transfer
Abstract
The operation of wireless power transfer systems with multiple transmitters (TXs) or receivers (RXs) is investigated. With multiple TXs or RXs in a limited space, couplings occur between TXs or between RXs. The frequency conditions for maximum efficiency and power transfer under such couplings are proposed. Effective resonant frequency of the TXs or the RXs is changed due to such couplings, and driving and/or resonant frequencies should therefore be adjusted accordingly. The amount and type of the required adjustments are provided. The efficiencies in these conditions are discussed. These concepts are supported by experiments with couplings between TXs or between RXs. Using the proposed frequency adjustments, 51-65-W power is transferred with 45%-57% efficiency, even with very low coupling coefficients of 0.025-0.063 from TX to RX. This improvement is significant compared to the unadjusted cases where less than 4 W is transferred with only 5%-33% efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576
Sample, A. P., Meyer, D. A., & Smith, J. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046002 · Cited by 1,808
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
RamRakhyani, A. K., Mirabbasi, S., & Chiao, M. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2010.2072782 · Cited by 945
Cannon, B. L., Hoburg, J. F., Stancil, D. D., & Goldstein, S. C. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2017195 · Cited by 924
Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission
Kiani, M., Jow, U.-M., & Ghovanloo, M. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2011.2158431 · Cited by 591
Imura, T., & Hori, Y. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112317 · Cited by 581
Stability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Low, Z. N., Chinga, R. A., Tseng, R., & Lin, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010110 · Cited by 528
A contactless electrical energy transmission system for portable-telephone battery chargers
Jang, Y., & Jovanovic, M. M. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.812472 · Cited by 484
The Circuit Theory Behind Coupled-Mode Magnetic Resonance-Based Wireless Power Transmission
Kiani, M., & Ghovanloo, M. (2012) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2011.2180446 · Cited by 421
Circuit-Model-Based Analysis of a Wireless Energy-Transfer System via Coupled Magnetic Resonances
Cheon, S., Kim, Y.-H., Kang, S.-Y., Lee, M. L., Lee, J.-M., & Zyung, T. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072893 · Cited by 395
Simultaneous mid-range power transfer to multiple devices
Kurs, A., Moffatt, R., & Soljačić, M. (2010) · Applied Physics Letters · doi:10.1063/1.3284651 · Cited by 389
Design of a contactless battery charger for cellular phone
Kim, C.-G., Seo, D.-H., You, J.-S., Park, J.-H., & Cho, B. H. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969404 · Cited by 345
Circuit Model Based Analysis of a Wireless Energy Transfer System via Coupled Magnetic Resonances
Cheon, S.-H., Kim, Y.-H., Lee, M.-L., & Kang, S.-Y. (2011) · The Transactions of the Korean Institute of Power Electronics · doi:10.6113/tkpe.2011.16.2.137 · Cited by 337
Feedback Analysis and Design of RF Power Links for Low-Power Bionic Systems
Baker, M. W., & Sarpeshkar, R. (2007) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2007.893180 · Cited by 317
On-Line Electric Vehicle using inductive power transfer system
Lee, S., Huh, J., Park, C., Choi, N.-S., Cho, G.-H., & Rim, C.-T. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5618092 · Cited by 277
Choi, B., Nho, J., Cha, H., Ahn, T., & Choi, S. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822039 · Cited by 237
An optimal design methodology for inductive power link with class-E amplifier
Kendir, G. A., Liu, W., Wang, G., Sivaprakasam, M., Bashirullah, R., Humayun, M. S., & Weiland, J. D. (2005) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2005.846208 · Cited by 222
An RFID-Based Closed-Loop Wireless Power Transmission System for Biomedical Applications
Kiani, M., & Ghovanloo, M. (2010) · IEEE Transactions on Circuits and Systems II: Express Briefs · doi:10.1109/tcsii.2010.2043470 · Cited by 173
Study on intelligent battery charging using inductive transmission of power and information
Hirai, J., Kim, T.-W., & Kawamura, A. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838106 · Cited by 172
Wireless power transfer using weakly coupled magnetostatic resonators
Mur-Miranda, J. O., Fanti, G., Feng, Y., Omanakuttan, K., Ongie, R., Setjoadi, A., & Sharpe, N. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5617728 · Cited by 160
Load models and their application in the design of loosely coupled inductive power transfer systems
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2002) · International Conference on Power System Technology (POWERCON) · doi:10.1109/icpst.2000.897166 · Cited by 115
Power transmission of a desk with a cord-free power supply
Hatanaka, K., Sato, F., Matsuki, H., Kikuchi, S., Murakami, J., Kawase, M., & Satoh, T. (2002) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2002.803120 · Cited by 71
Sawan, M., Hashemi, S., Sehil, M., Awwad, F. R., Hajj-Hassan, M., & Khouas, A. (2009) · Biomedical Microdevices · doi:10.1007/s10544-009-9323-7 · Cited by 53
Consideration on Cordless Power Station-contactless power transmission system
Murakami, J., Sato, F., Watanabe, T., Matsuki, H., Kikuchi, S., Harakawa, K., & Satoh, T. (1996) · IEEE Transactions on Magnetics · doi:10.1109/20.539482 · Cited by 52
Wireless powering of single-chip systems with integrated coil and external wire-loop resonator
Segura-Quijano, F. E., García-Cantón, J., Sacristán, J., Osés, T., & Baldi, A. (2008) · Applied Physics Letters · doi:10.1063/1.2887885 · Cited by 45
Cited by
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Wireless Charging Technologies: Fundamentals, Standards, and Network Applications
Lu, X., Wang, P., Niyato, D., Kim, D. I., & Han, Z. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2499783 · Cited by 968
Wireless Power Transmission With Self-Regulated Output Voltage for Biomedical Implant
Ahn, D., & Hong, S. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2273472 · Cited by 315
Self-citationBarman, S. D., Reza, A. W., Kumar, N., Karim, M. E., & Munir, A. B. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.031 · Cited by 303
Kim, J., Kim, D.-H., & Park, Y.-J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2365751 · Cited by 152
Metadata
- Authors
- Ahn, D., & Hong, S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-07
- Volume
- 60
- Issue
- 7
- Pages
- 2602-2613
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2041777380
- Cited by
- 382
- References
- 27
- FWCI
- 20.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.