The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Abstract
Recently, to ensure the reliability and safety of modern large-scale industrial processes, data-driven methods have been receiving considerably increasing attention, particularly for the purpose of process monitoring. However, great challenges are also met under different real operating conditions by using the basic data-driven methods. In this paper, widely applied data-driven methodologies suggested in the literature for process monitoring and fault diagnosis are surveyed from the application point of view. The major task of this paper is to sketch a basic data-driven design framework with necessary modifications under various industrial operating conditions, aiming to offer a reference for industrial process monitoring on large-scale industrial processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jolliffe, I. (2005) · Encyclopedia of Statistics in Behavioral Science · doi:10.1002/0470013192.bsa501 · Cited by 14,310
Wold, S., Esbensen, K., & Geladi, P. (1987) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(87)80084-9 · Cited by 11,606
Independent Component Analysis
Hyvärinen, A., Karhunen, J., & Oja, E. (2001) · Wiley eBooks · doi:10.1002/0471221317 · Cited by 5,007
Diagnosis and Fault-Tolerant Control
Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2003) · Springer eBooks · doi:10.1007/978-3-662-05344-7 · Cited by 2,789
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Yin, K., & Kavuri, S. N. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00160-6 · Cited by 2,723
Discriminant Analysis and Statistical Pattern Recognition.
Hawkins, D. M., & McLachlan, G. J. (1993) · Journal of the American Statistical Association · doi:10.2307/2290355 · Cited by 2,633
Barker, L. (2002) · Technometrics · doi:10.1198/tech.2002.s659 · Cited by 2,477
Isermann, R. (2006) · Springer eBooks · doi:10.1007/3-540-30368-5 · Cited by 2,217
Fault Detection and Diagnosis in Engineering Systems
Gertler, J. J. (2017) · CRC Press eBooks · doi:10.1201/9780203756126 · Cited by 1,999
Statistical process monitoring: basics and beyond
Joe Qin, S. (2003) · Journal of Chemometrics · doi:10.1002/cem.800 · Cited by 1,582
A review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., & Kavuri, S. N. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00161-8 · Cited by 1,530
Disturbance detection and isolation by dynamic principal component analysis
Ku, W., Storer, R. H., & Georgakis, C. (1995) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/0169-7439(95)00076-3 · Cited by 1,483
Survey on data-driven industrial process monitoring and diagnosis
Qin, S. J. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.09.004 · Cited by 1,470
Fault Detection and Diagnosis in Industrial Systems
Braatz, L. H. C. (2001) · Measurement Science and Technology · doi:10.1088/0957-0233/12/10/706 · Cited by 1,416
Issues of Fault Diagnosis for Dynamic Systems
(2000) · Springer eBooks · doi:10.1007/978-1-4471-3644-6 · Cited by 1,330
Fault Detection and Diagnosis in Industrial Systems
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2001) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0347-9 · Cited by 1,318
A Survey of Fault Detection, Isolation, and Reconfiguration Methods
Hwang, I., Kim, S., Kim, Y., & Seah, C. E. (2010) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2009.2026285 · Cited by 1,305
Frank, P. M., & Ding, X. (1997) · Journal of Process Control · doi:10.1016/s0959-1524(97)00016-4 · Cited by 1,273
Fault detection and diagnosis in engineering systems
Thomas, P. (2002) · Control Engineering Practice · doi:10.1016/s0967-0661(02)00064-3 · Cited by 1,171
Discriminant Analysis and Statistical Pattern Recognition
Sapatinas, T. (2005) · Journal of the Royal Statistical Society Series A: Statistics in Society · doi:10.1111/j.1467-985x.2005.00368_10.x · Cited by 942
(2002) · Springer Series in Statistics · doi:10.1007/b98835 · Cited by 919
(2003) · Technometrics · doi:10.1198/tech.2003.s783 · Cited by 908
Kernel partial least squares regression in reproducing kernel hilbert space
Rosipal, R., & Trejo, L. J. (2002) · doi:10.5555/944790.944806 · Cited by 873
Statistical process monitoring with independent component analysis
Lee, J.-M., Yoo, C., & Lee, I.-B. (2004) · Journal of Process Control · doi:10.1016/j.jprocont.2003.09.004 · Cited by 746
From Model, Signal to Knowledge: A Data-Driven Perspective of Fault Detection and Diagnosis
Dai, X., & Gao, Z. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2243743 · Cited by 728
Li, H., Yu, J., Hilton, C., & Liu, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2202354 · Cited by 726
Independent Component Analysis: Theory and Applications
Lee, T.-W. (2013) · Cited by 705
Chiang, L. H., Russell, E. L., & Braatz, R. D. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(99)00061-1 · Cited by 630
Russell, E. L., Chiang, L. H., & Braatz, R. D. (2000) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/s0169-7439(00)00058-7 · Cited by 525
Fault diagnosis based on Fisher discriminant analysis and support vector machines
Chiang, L. H., Kotanchek, M. E., & Kordon, A. K. (2004) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2003.10.002 · Cited by 523
Total projection to latent structures for process monitoring
Zhou, D., Li, G., & Qin, S. J. (2010) · AIChE Journal · doi:10.1002/aic.11977 · Cited by 472
Fault detection and diagnosis based on modified independent component analysis
Lee, J., Qin, S. J., & Lee, I. (2006) · AIChE Journal · doi:10.1002/aic.10978 · Cited by 419
Data-driven Methods for Fault Detection and Diagnosis in Chemical Processes
Russell, E. L., Chiang, L. H., & Braatz, R. D. (2000) · Advances in industrial control · doi:10.1007/978-1-4471-0409-4 · Cited by 416
Monitoring independent components for fault detection
Kano, M., Tanaka, S., Hasebe, S., Hashimoto, I., & Ohno, H. (2003) · AIChE Journal · doi:10.1002/aic.690490414 · Cited by 410
Dong, H., Wang, Z., & Gao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213553 · Cited by 372
Geometric properties of partial least squares for process monitoring
Li, G., Qin, S. J., & Zhou, D. (2010) · Automatica · doi:10.1016/j.automatica.2009.10.030 · Cited by 368
Nonlinear Dynamic Process Monitoring Using Canonical Variate Analysis and Kernel Density Estimations
Odiowei, P.-E. P., & Cao, Y. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2032654 · Cited by 361
Subspace method aided data-driven design of fault detection and isolation systems
Ding, S. X., Zhang, P., Naik, A., Ding, E. L., & Huang, B. (2009) · Journal of Process Control · doi:10.1016/j.jprocont.2009.07.005 · Cited by 312
Self-citationFault identification for process monitoring using kernel principal component analysis
Cho, J.-H., Lee, J.-M., Wook Choi, S., Lee, D., & Lee, I.-B. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2004.08.007 · Cited by 305
Decentralized Fault Diagnosis of Large-Scale Processes Using Multiblock Kernel Partial Least Squares
Zhang, Y., Zhou, H., Qin, S. J., & Chai, T. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2033181 · Cited by 283
Qin, S. J., & Zheng, Y. (2013) · AIChE Journal · doi:10.1002/aic.13959 · Cited by 263
A new fault diagnosis method using fault directions in Fisher discriminant analysis
He, Q. P., Qin, S. J., & Wang, J. (2005) · AIChE Journal · doi:10.1002/aic.10325 · Cited by 250
Najafabadi, T. A., Salmasi, F. R., & Jabehdar-Maralani, P. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2055775 · Cited by 250
A new subspace identification approach based on principal component analysis
Wang, J., & Qin, S. J. (2002) · Journal of Process Control · doi:10.1016/s0959-1524(02)00016-1 · Cited by 237
Reconstruction-Based Contribution for Process Monitoring with Kernel Principal Component Analysis
Alcala, C. F., & Qin, S. J. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9018947 · Cited by 229
Campos-Delgado, D. U., & Espinoza-Trejo, D. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2047829 · Cited by 224
A PLS-Based Statistical Approach for Fault Detection and Isolation of Robotic Manipulators
Muradore, R., & Fiorini, P. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167110 · Cited by 221
Data-Driven Soft Sensor Approach for Quality Prediction in a Refining Process
Wang, D., Liu, J., & Srinivasan, R. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2025124 · Cited by 198
Advanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines
Gritli, Y., Zarri, L., Rossi, C., Filippetti, F., Capolino, G.-A., & Casadei, D. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236992 · Cited by 193
He, X. H., Wang, Z., Liu, Y., & Zhou, D. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2251891 · Cited by 162
Vibration Analysis Based Interturn Fault Diagnosis in Induction Machines
Seshadrinath, J., Singh, B., & Panigrahi, B. K. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2271979 · Cited by 159
Design of a Fault-Tolerant Controller Based on Observers for a PMSM Drive
Akrad, A., Hilairet, M., & Diallo, D. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2050756 · Cited by 155
Fault Diagnosis and Fault-Tolerant Control in Linear Drives Using the Kalman Filter
Huang, S., Tan, K. K., & Lee, T. H. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2185011 · Cited by 152
Plastic Bearing Fault Diagnosis Based on a Two-Step Data Mining Approach
He, D., Li, R., & Zhu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2192894 · Cited by 143
Diagnosis of Three-Phase Electrical Machines Using Multidimensional Demodulation Techniques
Choqueuse, V., Benbouzid, M., Amirat, Y., & Turri, S. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2160138 · Cited by 122
On-line batch process monitoring using batch dynamic kernel principal component analysis
Jia, M., Chu, F., Wang, F., & Wang, W. (2010) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2010.02.004 · Cited by 112
Study on modifications of PLS approach for process monitoring
Yin, S., Ding, S. X., Zhang, P., Hagahni, A., & Naik, A. S. (2011) · IFAC Proceedings Volumes · doi:10.3182/20110828-6-it-1002.02876 · Cited by 104
Self-citationSupport vector machines for detection and characterization of rolling element bearing faults
Jack, L. B., & Nandi, A. K. (2001) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/095440620121500907 · Cited by 101
Fault Detection Based on Statistical Multivariate Analysis and Microarray Visualization
Ma, M.-D., Wong, D. S., Jang, S., & Tseng, S. (2009) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2030793 · Cited by 65
Gao, Z., Dai, X., Breikin, T., & Wang, H. (2008) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2008.2007802 · Cited by 52
On Fault Detection in Linear Discrete‐Time, Periodic, and Sampled‐Data Systems
Zhang, P., & Ding, S. X. (2008) · Journal of Control Science and Engineering · doi:10.1155/2008/849546 · Cited by 51
Self-citationData-Driven Design of Observers and Its Applications
Ding, S. X., Yin, S., Wang, Y., Wang, Y., Yang, Y., & Ni, B. (2011) · IFAC Proceedings Volumes · doi:10.3182/20110828-6-it-1002.00891 · Cited by 19
Self-citation
Cited by
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
“In [14]–[16], comprehensive fault diagnostic methods were reviewed respectively from the datadriven perspective.”
MethodSelf-citationA new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
Self-citationHow, D. N. T., Hannan, M. A., Hossain Lipu, M. S., & Ker, P. J. (2019) · IEEE Access · doi:10.1109/access.2019.2942213 · Cited by 812
A transfer convolutional neural network for fault diagnosis based on ResNet-50
Wen, L., Li, X., & Gao, L. (2020) · Neural Computing and Applications · doi:10.1007/s00521-019-04097-w · Cited by 764
Metadata
- Authors
- Yin, S., Ding, S. X., Xie, X., & Luo, H.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-11
- Volume
- 61
- Issue
- 11
- Pages
- 6418-6428
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2158958729
- Cited by
- 1,716
- References
- 62
- FWCI
- 174.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.