The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Disturbance-Observer-Based Control and Related Methods—An Overview
Open accessAbstract
Disturbance-observer-based control (DOBC) and related methods have been researched and applied in various industrial sectors in the last four decades. This survey, at first time, gives a systematic and comprehensive tutorial and summary on the existing disturbance/uncertainty estimation and attenuation techniques, most notably, DOBC, active disturbance rejection control, disturbance accommodation control, and composite hierarchical antidisturbance control. In all of these methods, disturbance and uncertainty are, in general, lumped together, and an observation mechanism is employed to estimate the total disturbance. This paper first reviews a number of widely used linear and nonlinear disturbance/uncertainty estimation techniques and then discusses and compares various compensation techniques and the procedures of integrating disturbance/uncertainty compensation with a (predesigned) linear/nonlinear controller. It also provides concise tutorials of the main methods in this area with clear descriptions of their features. The application of this group of methods in various industrial sections is reviewed, with emphasis on the commercialization of some algorithms. The survey is ended with the discussion of future directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From PID to Active Disturbance Rejection Control
Han, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011621 · Cited by 6,803 · cited 20×
“For more information about ESO and related ADRC, please refer to the recent survey paper [28].”
BackgroundMethodInfluentialIsidori, A. (1995) · Communications and Control Engineering · doi:10.1007/978-1-84628-615-5 · Cited by 6,755
Dorf, R. C., & Sinha, N. K. (1981) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1981.4308749 · Cited by 2,482
Scaling and bandwidth-parameterization based controller tuning
Gao, Z. (2005) · Proceedings of the 2003 American Control Conference, 2003. · doi:10.1109/acc.2003.1242516 · Cited by 2,446
Nonlinear Control Systems: An Introduction
(1985) · Lecture Notes in Control and Information Sciences · doi:10.1007/bfb0006368 · Cited by 1,852
A nonlinear disturbance observer for robotic manipulators
Chen, W.-H., Ballance, D. J., Gawthrop, P. J., & O'Reilly, J. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.857974 · Cited by 1,752
Self-citationDisturbance Observer Based Control for Nonlinear Systems
Chen, W.-H. (2004) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2004.839034 · Cited by 1,452
Self-citationHigh‐gain observers in nonlinear feedback control
Khalil, H. K., & Praly, L. (2014) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.3051 · Cited by 896
On the convergence of an extended state observer for nonlinear systems with uncertainty
Guo, B.-Z., & Zhao, Z.-L. (2011) · Systems & Control Letters · doi:10.1016/j.sysconle.2011.03.008 · Cited by 893
Active disturbance rejection control: Methodology and theoretical analysis
Huang, Y., & Xue, W. (2014) · ISA Transactions · doi:10.1016/j.isatra.2014.03.003 · Cited by 892
Disturbance Observer-Based Control: Methods and Applications
Li, S., Yang, J. T., Chen, W., & Chen, X. (2014) · Cited by 840
Self-citationDesign of unknown input observers and robust fault detection filters
CHEN, J., PATTON, R. J., & ZHANG, H.-Y. (1996) · International Journal of Control · doi:10.1080/00207179608921833 · Cited by 835
Robust speed control of DC servomotors using modern two degrees-of-freedom controller design
Umeno, T., & Hori, Y. (1991) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.97556 · Cited by 723
Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System
Ohishi, K., Nakao, M., Ohnishi, K., & Miyachi, K. (1987) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1987.350923 · Cited by 614
Accomodation of external disturbances in linear regulator and servomechanism problems
Johnson, C. (1971) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1971.1099830 · Cited by 605
Continuous nonsingular terminal sliding mode control for systems with mismatched disturbances
Yang, J., Li, S., Su, J., & Yu, X. (2013) · Automatica · doi:10.1016/j.automatica.2013.03.026 · Cited by 587
Self-citationImproving Disturbance-Rejection Performance Based on an Equivalent-Input-Disturbance Approach
She, J.-H., Fang, M., Ohyama, Y., Hashimoto, H., & Wu, M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.905976 · Cited by 579
Performance Recovery of Feedback-Linearization-Based Designs
Freidovich, L. B., & Khalil, H. K. (2008) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2008.2006821 · Cited by 483
On the centrality of disturbance rejection in automatic control
Gao, Z. (2014) · ISA Transactions · doi:10.1016/j.isatra.2013.09.012 · Cited by 481
Anti-disturbance control theory for systems with multiple disturbances: A survey
Guo, L., & Cao, S. (2014) · ISA Transactions · doi:10.1016/j.isatra.2013.10.005 · Cited by 355
Self-citationDisturbance Observer for Estimating Higher Order Disturbances in Time Series Expansion
Kim, K.-S., Rew, K.-H., & Kim, S. (2010) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2010.2049522 · Cited by 351
Nonlinear-Disturbance-Observer-Based Robust Flight Control for Airbreathing Hypersonic Vehicles
Yang, J. T., Li, S., Sun, C., & Guo, L. (2013) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2013.6494412 · Cited by 337
Self-citationMohamed, Y. A.-R. I. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895074 · Cited by 324
On Convergence of the Nonlinear Active Disturbance Rejection Control for MIMO Systems
Guo, B.-Z., & Zhao, Z.-L. (2013) · SIAM Journal on Control and Optimization · doi:10.1137/110856824 · Cited by 299
Yang, J., Su, J., Li, S., & Yu, X. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2279232 · Cited by 285
Self-citationUmeno, T., Kaneko, T., & Hori, Y. (1993) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.238016 · Cited by 284
Fault estimation and accommodation for linear MIMO discrete-time systems
Jiang, B., & Chowdhury, F. N. (2005) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2004.839569 · Cited by 281
Optimal control of the linear regulator with constant disturbances
Johnson, C. (1968) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1968.1098947 · Cited by 260
Yang, J., Zheng, W. X., Li, S., Wu, B., & Cheng, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2450736 · Cited by 245
Self-citationCorrecteurs proportionnels-intégraux généralisés
Fliess, M., Marquez, R., Delaleau, E., & Sira–Ramírez, H. (2002) · ESAIM: Control, Optimisation and Calculus of Variations · doi:10.1051/cocv:2002002 · Cited by 222
Design of UDE‐based controllers from their two‐degree‐of‐freedom nature
Zhong, Q., Kuperman, A., & Stobart, R. K. (2011) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.1674 · Cited by 203
Yang, J., Li, S., & Chen, W.-H. (2012) · International Journal of Control · doi:10.1080/00207179.2012.675520 · Cited by 201
Self-citationOn the Robust Control of Buck-Converter DC-Motor Combinations
Sira-Ramirez, H., & Oliver-Salazar, M. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227806 · Cited by 195
Design of a nonlinear disturbance observer
Chen, X., Komada, S., & Fukuda, T. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.836359 · Cited by 182
An alternative paradigm for control system design
Gao, Z., Huang, Y., & Han, J. (2003) · Proceedings of the 40th IEEE Conference on Decision and Control (Cat. No.01CH37228) · doi:10.1109/cdc.2001.980926 · Cited by 177
On practical applications of active disturbance rejection control
Zheng, Q. C., & Gao, Z. (2010) · Chinese Control Conference (CCC) · Cited by 157
Disturbance observer based multi-variable control of ball mill grinding circuits
Chen, X., Yang, J. T., Li, S., & Li, Q. (2009) · Journal of Process Control · doi:10.1016/j.jprocont.2009.02.004 · Cited by 154
Self-citationRobust Stabilization of Non-Minimum Phase Nonlinear Systems Using Extended High-Gain Observers
Nazrulla, S., & Khalil, H. K. (2010) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2010.2069612 · Cited by 112
An energy saving, factory-validated disturbance decoupling control design for extrusion processes
Zheng, Q. C., & Gao, Z. (2012) · World Congress on Intelligent Control and Automation · doi:10.1109/wcica.2012.6358364 · Cited by 108
Disturbance rejection of dead-time processes using disturbance observer and model predictive control
Yang, J. T., Li, S., Chen, X., & Li, Q. (2010) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2010.06.006 · Cited by 83
Self-citationYang, J. T., Chen, W., Li, S., & Chen, X. (2011) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.1850 · Cited by 48
Self-citationControl of the process with inverse response and dead-time based on disturbance observer
Zhu, H., Zhang, G., & Hui-he, S. (2005) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2005.1470759 · Cited by 33
Cited by
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2583412 · Cited by 695
Self-citationDisturbance Observer-Based Robust Control and Its Applications: 35th Anniversary Overview
Sariyildiz, E., Oboe, R., & Ohnishi, K. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2903752 · Cited by 546
Modeling and Advanced Control of Dual-Active-Bridge DC–DC Converters: A Review
Shao, S., Chen, L., Shan, Z., Gao, F., Chen, H., Sha, D., & Dragičević, T. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3108157 · Cited by 488
Review on Advanced Control Technologies for Bidirectional DC/DC Converters in DC Microgrids
Xu, Q., Vafamand, N., Chen, L., Dragicevic, T., Xie, L., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2978064 · Cited by 439
Sliding Mode Direct Yaw-Moment Control Design for In-Wheel Electric Vehicles
Ding, S., Liu, L., & Zheng, W. X. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2682024 · Cited by 414
Metadata
- Authors
- Chen, W.-H., Yang, J., Guo, L., & Li, S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-02
- Volume
- 63
- Issue
- 2
- Pages
- 1083-1095
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2230652337
- Cited by
- 2,985
- References
- 42
- FWCI
- 133.31
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.