The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
High Step-Up DC–DC Converter With Active Switched-Inductor and Passive Switched-Capacitor Networks
Abstract
High-gain voltage conversion is a feature required for several applications, especially for power processing of low-voltage renewable sources in grid-connected systems. In this scope, the presented paper proposes a novel transformerless high gain step-up dc-dc converter based on an active switched-inductor and a passive switched-capacitor networks. The main advantages of the proposed converter are the high voltage gain (>10), the reduced voltage stresses across the switches and the reduced number of components when compared to topologies that provide the same voltage gain using similar principles. The detailed analysis of the proposed converter and a comparison considering other topologies previously published in the literature are also presented in this manuscript. In order to verify the proposed converter performance, a prototype has been built for a power of 200 W, input and output voltages of 20 and 260 V, respectively, and switching frequency of 50 kHz. Experimental results validate the effectiveness of the theoretical analysis proving the satisfactory converter performance, which peak efficiency is around 95.5%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916403 · Cited by 1,379
High-efficiency, high step-up DC-DC converters
Zhao, Q., & Lee, F. C. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.807188 · Cited by 1,015
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
Voltage Multiplier Cells Applied to Non-Isolated DC–DC Converters
Prudente, M., Pfitscher, L. L., Emmendoerfer, G., Romaneli, E. F., & Gules, R. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915762 · Cited by 750
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591
A DC–DC multilevel boost converter
Rosas-Caro, J. C., Ramirez, J. M., Peng, F. Z., & Valderrabano, A. (2010) · IET Power Electronics · doi:10.1049/iet-pel.2008.0253 · Cited by 522
Hybrid Switched-Inductor Converters for High Step-Up Conversion
Tang, Y., Fu, D., Wang, T., & Xu, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2364797 · Cited by 451
Boost Converter With Coupled Inductors and Buck–Boost Type of Active Clamp
Wu, T.-F., Lai, Y.-S., Hung, J.-C., & Chen, Y.-M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.903925 · Cited by 425
A Family of Single-Switch PWM Converters With High Step-Up Conversion Ratio
Ismail, E. H., Al-Saffar, M. A., Sabzali, A. J., & Fardoun, A. A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916427 · Cited by 359
Analysis and Implementation of a Novel Bidirectional DC–DC Converter
Yang, L.-S., & Liang, T.-J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134060 · Cited by 261
Wang, P., Zhou, L., Zhang, Y., Li, J., & Sumner, M. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2688324 · Cited by 201
Active Voltage Clamp in Flyback Converters Operating in CCM Mode Under Wide Load Variation
Papanikolaou, N. P., & Tatakis, E. C. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825342 · Cited by 199
A New Hybrid Boosting Converter for Renewable Energy Applications
Wu, B., Li, S., Liu, Y., & Ma Smedley, K. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2420994 · Cited by 177
Unified approach to developing single-stage power converters
Wu, T.-F., & Yu, T.-H. (1998) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.640279 · Cited by 171
Switched-coupled inductor cell for DC–DC converters with very large conversion ratio
Berkovich, Y., & Axelrod, B. (2011) · IET Power Electronics · doi:10.1049/iet-pel.2009.0341 · Cited by 170
Generalized High Step-Up DC-DC Boost-Based Converter With Gain Cell
Schmitz, L., Martins, D. C., & Coelho, R. F. (2017) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2016.2603782 · Cited by 163
Self-citationA Safety Enhanced, High Step-Up DC–DC Converter for AC Photovoltaic Module Application
Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2170097 · Cited by 162
A Novel ZCS-PWM Flyback Converter With a Simple ZCS-PWM Commutation Cell
Wang, C.-M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911917 · Cited by 128
Input‐parallel output‐series DC–DC converter for non‐isolated high step‐up applications
Hu, X., Li, L., Li, Y., et al. (2016) · Electronics Letters · doi:10.1049/el.2016.2835 · Cited by 19
Cited by
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H., Kim, M.-S., Cho, H.-G., & Kim, H.-J. (2019) · Electronics · doi:10.3390/electronics9010031 · Cited by 269
Zhang, Y., Liu, Q., Gao, Y., Li, J., & Sumner, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2850020 · Cited by 178
Wu, X., Wang, J., Zhang, Y., Du, J., Liu, Z., & Chen, Y. (2021) · Automotive Innovation · doi:10.1007/s42154-021-00163-z · Cited by 42
Metadata
- Authors
- Salvador, M. A., Lazzarin, T. B., & Coelho, R. F.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2018-07
- Volume
- 65
- Issue
- 7
- Pages
- 5644-5654
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2773982957
- Cited by
- 438
- References
- 22
- FWCI
- 11.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.