Digital Twin in Industry: State-of-the-Art
The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
Digital twin (DT) is one of the most promising enabling technologies for realizing smart manufacturing and Industry 4.0. DTs are characterized by the seamless integration between the cyber and physical spaces. The importance of DTs is increasingly recognized by both academia and industry. It has been almost 15 years since the concept of the DT was initially proposed. To date, many DT applications have been successfully implemented in different industries, including product design, production, prognostics and health management, and some other fields. However, at present, no paper has focused on the review of DT applications in industry. In an effort to understand the development and application of DTs in industry, this paper thoroughly reviews the state-of-the-art of the DT research concerning the key components of DTs, the current development of DTs, and the major DT applications in industry. This paper also outlines the current challenges and some possible directions for future work.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to Tao et al. [29], DT technology allows designers to create a comprehensive digital representation of products during the design process.”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [29]
In the citing paper
“energy management [29]”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [29]
In the citing paper
“It functions as an 'engine' that transforms large sets of data into actionable information.”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [29]
In the citing paper
“Thus, DTs enable companies to make more accurate predictions, rational decisions and informed plans [59].”
From Digital Twin Technology Challenges and Applications: A Comprehensive Review (2022) · cites this paper as [59]
In the citing paper
“According to the literature, around 18% of engineering applications of DTs focus on design, approximately 35% on production areas, 38% on prognostics and health management (PHM) and 9% on other areas [59].”
From Digital Twin Technology Challenges and Applications: A Comprehensive Review (2022) · cites this paper as [59]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles
Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 3,395 · cited 4×
“, increase of reliability, and timely assessment of mission parameters) [7].”
BackgroundInfluentialDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920 · cited 1×
“They prescribed nine principles to improve the maintenance efficiency and reduce maintenance failure [51].”
BackgroundSelf-citationDIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
RajratnaKharat, V. B. P. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493930 · Cited by 1,784
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Digital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison
Qi, Q., & Tao, F. (2018) · IEEE Access · doi:10.1109/access.2018.2793265 · Cited by 1,716 · cited 2×
“to improve the performance of product/process in the physical space [2].”
BackgroundSelf-citationAbout The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474 · cited 2×
“respond to state changes even during an ongoing operation [27].”
BackgroundMethodDigital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397 · cited 5×
“resents the physical entity; VE represents the virtual entity; Ss represents the services for both PE and VE; DD stands for the DT data; and CN means the connection of different parts [12], [74].”
BackgroundInfluentialSelf-citationShaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305 · cited 1×
“They argued that the DT enabled designers to evaluate the quality of a product even at the early stage [36].”
BackgroundDigital twin-driven product design framework
Tao, F., Sui, F., Liu, A., Qi, Q., Zhang, M., Song, B., Guo, Z., Lu, S. C.-Y., & Nee, A. Y. C. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1443229 · Cited by 1,187 · cited 1×
“A case study on bicycle design was conducted to instantiate the framework [35].”
MethodSelf-citationReengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · cited 1×
“They reported that the DT could facilitate the management of aircraft service life [13].”
BackgroundDigital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
Self-citationThe Digital Twin: Realizing the Cyber-Physical Production System for Industry 4.0
Uhlemann, T. H.-J., Lehmann, C., & Steinhilper, R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.152 · Cited by 994 · cited 2×
“DTs had certain advantages, over the value stream mapping, in production optimization [41].”
BackgroundC2PS: A Digital Twin Architecture Reference Model for the Cloud-Based Cyber-Physical Systems
Alam, K. M., & El Saddik, A. (2017) · IEEE Access · doi:10.1109/access.2017.2657006 · Cited by 741 · cited 1×
“The model was proven effective for making recommendations based on a telematics-based driverassistance system [54].”
MethodToward a Digital Twin for real-time geometry assurance in individualized production
Söderberg, R., Wärmefjord, K., Carlson, J. S., & Lindkvist, L. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.038 · Cited by 637 · cited 1×
“discussed the DT application in real-time geometry assurance during the preproduction and production phases, based on a case study of the sheet metal assembly station [42].”
Smart manufacturing must embrace big data
Kusiak, A. (2017) · Nature · doi:10.1038/544023a · Cited by 618 · cited 1×
“Big data analytics can make full use of the data to discover failure causes, streamline a supply chain, optimize product performance, and enhance the production efficiency [1].”
BackgroundHaag, S., & Anderl, R. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.02.006 · Cited by 559 · cited 1×
“DT of a bending test bench, together with some specific modeling methods of a physical entity, digital entity, and connection [21].”
MethodExperimentable Digital Twins—Streamlining Simulation-Based Systems Engineering for Industry 4.0
Schluse, M., Priggemeyer, M., Atorf, L., & Rossmann, J. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2804917 · Cited by 524 · cited 1×
“They also considered the EDT as an enabler of the simulation-based system engineering, optimization, and control [44].”
BackgroundDigital Twin Data Modeling with AutomationML and a Communication Methodology for Data Exchange
Schroeder, G. N., Steinmetz, C., Pereira, C. E., & Espindola, D. B. (2016) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2016.11.115 · Cited by 492 · cited 1×
“A case study on industrial valves was conducted to validate the method [18].”
MethodThe Digital Twin: Demonstrating the Potential of Real Time Data Acquisition in Production Systems
Uhlemann, T. H.-J., Schock, C., Lehmann, C., Freiberger, S., & Steinhilper, R. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.04.043 · Cited by 489 · cited 1×
“In this way, it realized the effective production control in real time [43].”
BackgroundZhang, H., Liu, Q., Chen, X., Zhang, D., & Leng, J. (2017) · IEEE Access · doi:10.1109/access.2017.2766453 · Cited by 471 · cited 1×
“A case study on the glass production line was used to validate the effectiveness of the approach [37].”
MethodSelf-citationBuilding blocks for a digital twin of additive manufacturing
Knapp, G. L., Mukherjee, T., Zuback, J. S., Wei, H. L., Palmer, T. A., De, A., & DebRoy, T. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.039 · Cited by 414 · cited 2×
“it led to more accurate predictions of the cooling rate and melting rate than the level set method and heat conduction models [47].”
BackgroundMethodDynamic Bayesian Network for Aircraft Wing Health Monitoring Digital Twin
Li, C., Mahadevan, S., Ling, Y., Choze, S., & Wang, L. (2017) · AIAA Journal · doi:10.2514/1.j055201 · Cited by 381 · cited 1×
“The DT model led to more accurate diagnosis and prognosis based on a case study of the leading edge of aircraft wings [45].”
MethodCai, Y., Starly, B., Cohen, P., & Lee, Y.-S. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.094 · Cited by 340 · cited 3×
“On the one hand, almost every paper [3], [4], [6], [9]–[12], [26]–[28], [31]–[53] acknowledged the importance of DT modeling.”
BackgroundMethodThe digital twin of an industrial production line within the industry 4.0 concept
Vachalek, J., Bartalsky, L., Rovny, O., Sismisova, D., Morhac, M., & Loksik, M. (2017) · 2017 21st International Conference on Process Control (PC) · doi:10.1109/pc.2017.7976223 · Cited by 339 · cited 2×
“On the one hand, almost every paper [3], [4], [6], [9]–[12], [26]–[28], [31]–[53] acknowledged the importance of DT modeling.”
BackgroundMethodA Simulation-Based Architecture for Smart Cyber-Physical Systems
Gabor, T., Belzner, L., Kiermeier, M., Beck, M. T., & Neitz, A. (2016) · 2016 IEEE International Conference on Autonomic Computing (ICAC) · doi:10.1109/icac.2016.29 · Cited by 298 · cited 3×
“[8], the DT is a special simulation, built based on the expert knowledge and real data collected from the existing”
BackgroundMethodSchluse, M., & Rossmann, J. (2016) · 2016 IEEE International Symposium on Systems Engineering (ISSE) · doi:10.1109/syseng.2016.7753162 · Cited by 292
Building digital twins of 3D printing machines
DebRoy, T., Zhang, W., Turner, J., & Babu, S. S. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.005 · Cited by 259 · cited 2×
“proposed some applications of the DT of a 3-D printing machine, such as heat transfer modeling, solidification modeling, property prediction, residual stress modeling, and distortion modeling [22].”
MethodThe Airframe Digital Twin: Some Challenges to Realization
Tuegel, E. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1812 · Cited by 255 · cited 6×
“The EDT can be used to streamline a development process and conduct detailed simulations [11].”
BackgroundInfluentialFuture Modeling and Simulation of CPS-based Factories: an Example from the Automotive Industry
Weyer, S., Meyer, T., Ohmer, M., Gorecky, D., & Zühlke, D. (2016) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2016.12.168 · Cited by 244 · cited 3×
“Some researchers [5], [8], [9] believe that the DT research should focus on simulation.”
BackgroundBrenner, B., & Hummel, V. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.04.039 · Cited by 212
Visualising the digital twin using web services and augmented reality
Schroeder, G., Steinmetz, C., Pereira, C. E., Muller, I., Garcia, N., Espindola, D., & Rodrigues, R. (2016) · 2016 IEEE 14th International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2016.7819217 · Cited by 160 · cited 2×
“They also developed an augmented reality system to display the real-time information [17].”
BackgroundIndustrial IoT lifecycle via digital twins
Canedo, A. (2016) · Proceedings of the Eleventh IEEE/ACM/IFIP International Conference on Hardware/Software Codesign and System Synthesis · doi:10.1145/2968456.2974007 · Cited by 152 · cited 1×
“They argued that the product design could be notably improved by adding the data feedback from DTs [33].”
BackgroundOn the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin
Cerrone, A., Hochhalter, J., Heber, G., & Ingraffea, A. (2014) · International Journal of Aerospace Engineering · doi:10.1155/2014/439278 · Cited by 130 · cited 1×
“A specimen DT model was created to deal with the ambiguity of crack paths under the shear loading, which led to more accurate predictions [50].”
MethodData-centric middleware based digital twin platform for dependable cyber-physical systems
Yun, S., Park, J.-H., & Kim, W.-T. (2017) · 2017 Ninth International Conference on Ubiquitous and Future Networks (ICUFN) · doi:10.1109/icufn.2017.7993933 · Cited by 129 · cited 1×
“proposed a modeling architecture for large-scale DT platforms that included a distributed cooperation framework and a communication mechanism [19].”
BackgroundBazilevs, Y., Deng, X., Korobenko, A., di Scalea, F. L., Todd, M. D., & Taylor, S. (2015) · Journal of Applied Mechanics · doi:10.1115/1.4030795 · Cited by 120 · cited 1×
“The framework was validated based on a case study on wind-turbine blades [30].”
MethodVirtualisation process of a sheet metal punching machine within the Industry 4.0 vision
Moreno, A., Vélez, G., Ardanza, A., Barandiarán, Í., de Infante, Á. R., & Chopitea, R. (2016) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-016-0319-2 · Cited by 120 · cited 1×
“between a punching machine and moving elements, operation modeling, and simulation [20].”
BackgroundStructural Health Management of Damaged Aircraft Structures Using Digital Twin Concept
Seshadri, B. R., & Krishnamurthy, T. (2017) · 25th AIAA/AHS Adaptive Structures Conference · doi:10.2514/6.2017-1675 · Cited by 112 · cited 2×
“On the one hand, almost every paper [3], [4], [6], [9]–[12], [26]–[28], [31]–[53] acknowledged the importance of DT modeling.”
BackgroundTheories and technologies for cyber-physical fusion in digital twin shop-floor
Tao, F., Cheng, Y., Cheng, J., Zhang, M., Xu, W., & Qi, Q. (2017) · PolyU Institutional Research Archive (Hong Kong Polytechnic University) · doi:10.13196/j.cims.2017.08.001 · Cited by 111
Self-citationMultiphysics Stimulated Simulation Digital Twin Methods for Fleet Management
Reifsnider, K., & Majumdar, P. (2013) · 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference · doi:10.2514/6.2013-1578 · Cited by 109 · cited 1×
“Besides, the method demonstrated high sensitivity to fracture development, and was therefore, useful for the PHM [49].”
MethodExperimentable digital twins for model-based systems engineering and simulation-based development
Schluse, M., Atorf, L., & Roßmann, J. (2017) · IEEE International Systems Conference (SysCon) · doi:10.1109/syscon.2017.7934796 · Cited by 108 · cited 2×
“claimed that the EDT could reduce the complexity of simulation and increase the flexibility of a driver-assistance system [53].”
BackgroundChallenges with Structural Life Forecasting Using Realistic Mission Profiles
Gockel, B., Tudor, A., Brandyberry, M., Penmetsa, R., & Tuegel, E. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1813 · Cited by 91 · cited 4×
“They suggested that the DT could reduce cost and improve reliability, which were the two priorities of the US Air Force [52].”
BackgroundInfluentialBielefeldt, B., Hochhalter, J., & Hartl, D. (2015) · Volume 1: Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Modeling, Simulation and Control of Adaptive Systems · doi:10.1115/smasis2015-8975 · Cited by 67 · cited 2×
“A case study on aircraft wings indicated that the method can effectively reduce the amount of calculations [29].”
BackgroundMulti-physics Response of Structural Composites and Framework for Modeling Using Material Geometry
Majumdar, P. K., FaisalHaider, M., & Reifsnider, K. (2013) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2013-1577 · Cited by 56 · cited 2×
“studied the behavior of synergistic materials based on the multiphysics modeling, which was used as the foundation for building the DT model [16].”
MethodThe Development and use of a Digital Twin Model for Tire Touchdown Health Monitoring
Zakrajsek, A. J., & Mall, S. (2017) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2017-0863 · Cited by 53 · cited 2×
“bility of failure for the varying sink rate, yaw angle, and speed [46].”
BackgroundCoupling Damage-Sensing Particles to the Digitial Twin Concept
Hochhalter, J. D., Leser, W. P., Newman, J. A., Glaessgen, E. H., Gupta, V. K., & Yamakov, V. I. (2014) · Cited by 48
Smarslok, B., Culler, A., & Mahadevan, S. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1817 · Cited by 43 · cited 1×
“proposed a framework for error quantification and confidence assessment, including a set of metrics to measure the fidelity of DT models [23].”
MethodKonstantinov, S., Ahmad, M., Ananthanarayan, K., & Harrison, R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.02.035 · Cited by 39 · cited 2×
“Other subjects included geometry assurance, cyber–physical system, and additive manufacturing, wind farm [7], [40], [46], [65], [66].”
BackgroundMethodDigital Factories for Capability Modeling and Visualization
Ameri, F., & Sabbagh, R. (2016) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-51133-7_9 · Cited by 28 · cited 1×
“factory, was developed in terms of capability extraction, supply chain, and digitalization process [39].”
BackgroundMaterial Property Determination of Vibration Fatigued DMLS and Cold-Rolled Nickel Alloys
Scott-Emuakpor, O. E., George, T. J., Beck, J. A., Schwartz, J., Holycross, C., Shen, M.-H. H., & Slater, J. (2014) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2014-26247 · Cited by 25 · cited 1×
“The technique was verified through an experiment on nickel alloys [15].”
MethodRicks, T. M., Lacy, T. E., Pineda, E. J., Bednarcyk, B. A., & Arnold, S. M. (2015) · American Society of Composites - 30th Technical Conference · Cited by 6
Research works printed but not linked: 6
- 10.13196/j.cims.2017.04.010 · doi:10.13196/j.cims.2017.04.010
- 10.16080/j.issn1671-833x.2017.07.041 · doi:10.16080/j.issn1671-833x.2017.07.041
- 0, Healthcare Solution Testing for Future | Digital Twins in Healthcare
- tao, 2010, Theory and Practice Optimal Resource Service Allocation in Manufacturing Grid, 11
- 10.13196/j.cims.2018.01.001 · doi:10.13196/j.cims.2018.01.001
- 10.13196/j.cims.2017.01.01 · doi:10.13196/j.cims.2017.01.01
Cited by
Digital twin: Enabling technologies, challenges and open research
Fuller, A., Fan, Z., Day, C., & Barlow, C. (2020) · IEEE Access · doi:10.1109/access.2020.2998358 · Cited by 2,965
“the-art paper for Digital Twins combined with industry. Both papers share enabling technologies, IoT, cloud, big data, and artificial intelligence showing how these technologies use Digital Twins. Tao [85] also elaborates on some of the main application uses; Digital Twin simulation, Digital Twin “as a service”, data f…”
Review of digital twin about concepts, technologies, and industrial applications
Liu, M., Fang, S., Dong, H., & Xu, C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.017 · Cited by 1,875
Digital twin: values, challenges and enablers from a modeling perspective
Rasheed, A., San, O., & Kvamsdal, T. (2020) · IEEE Access · doi:10.1109/access.2020.2970143 · Cited by 1,952
“The state-of-the-art of digital twin applications in industrial settings has been studied systematically in [42], where the authors concluded that the most popu-”
BackgroundEnabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Self-citationTowards a semantic Construction Digital Twin: Directions for future research
Boje, C., Guerriero, A., Kubicki, S., & Rezgui, Y. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103179 · Cited by 1,324
Metadata
- Authors
- Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C.
- Affiliations
- Beihang University (CN)
- UNSW Sydney (AU)
- National University of Singapore (SG)
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2019-04
- Volume
- 15
- Issue
- 4
- Pages
- 2405-2415
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2910597635
- Cited by
- 5,871
- References
- 49
- Citations by year
- 2026: 1814 · 2025: 1193 · 2024: 847 · 2023: 756 · 2022: 637 · 2021: 405 · 2020: 170 · 2019: 46
- FWCI
- 172.48
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Industrial Informatics (publishedVersion)
- Funders
- National Natural Science Foundation of China (51522501)
- Beijing Nova Program (Z161100004916063)
- National Key Research and Development Plan (2016YFB1101700)
- Yong Scientist Innovation Group Program in Beihang University
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Keywords
- digital twin, Industry 4.0, smart manufacturing, cyber-physical integration, digital twin applications, product design, production, prognostics and health management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.