A Comprehensive Review of State-of-the-Art Parameter Estimation Techniques for Permanent Magnet Synchronous Motors in Wide Speed Range
The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
Permanent magnet synchronous motor (PMSM) drive has emerged as one of the most preferred motor drives for industrial applications owing to its distinguished advantages, such as high torque density, high efficiency, and wide speed range operation. However, accurately updated knowledge about the PMSM parameters is crucial to designing a high-performance trajectory tracking controller. This article presents a state-of-the-art comprehensive review and up-to-date progress of the offline and online parameter estimation techniques of the PMSM drives. First, the problems associated with parameter estimation of the PMSM are systematically summarized to identify the parameters having fast and accurate convergence. Second, the offline parameter estimation techniques are categorized based on the frequency and time responses. Third, the recent advances and developments of the online parameter estimation techniques for PMSMs are assessed. Finally, there is a discussion of extensive industrial applications and future research trends for the parameter estimation techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Discrete-time Signal Processing
Williamson, D. (1999) · Advanced Textbooks in Control and Signal Processing · doi:10.1007/978-1-4471-0541-1 · Cited by 4,858
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135 · cited 1×
“[133], the different ways of data processing are analyzed for fault diagnosis approaches such as model-based [134], signal-based [134], and knowledge-based approaches [135].”
BackgroundDiscrete-time signal processing (2nd ed.)
Oppenheim, A. V., Schafer, R. W., & Buck, J. R. (1999) · Prentice-Hall, Inc eBooks · Cited by 989
Gao, Z., Cecati, C., & Ding, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2419013 · Cited by 776
Permanent magnet motor technology : design and applications
Gieras, J. F., & Wing, M. (1996) · Thammasat University Digital Collections · Cited by 746
From Model, Signal to Knowledge: A Data-Driven Perspective of Fault Detection and Diagnosis
Dai, X., & Gao, Z. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2243743 · Cited by 728
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2583412 · Cited by 695
Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame
Morimoto, S., Kawamoto, K., Sanada, M., & Takeda, Y. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800777 · Cited by 680
Industrial Applications of the Kalman Filter: A Review
Auger, F., Hilairet, M., Guerrero, J. M., Monmasson, E., Orlowska-Kowalska, T., & Katsura, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236994 · Cited by 590
Pellegrino, G., Vagati, A., Guglielmi, P., & Boazzo, B. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2151825 · Cited by 576
Inverter output voltage synthesis using novel dead time compensation
Choi, J.-W., & Sul, S.-K. (1996) · IEEE Transactions on Power Electronics · doi:10.1109/63.486169 · Cited by 509
Online Parameter Estimation and Adaptive Control of Permanent-Magnet Synchronous Machines
Underwood, S. J., & Husain, I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036029 · Cited by 502
Ichikawa, S., Tomita, M., Doki, S., & Okuma, S. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.870875 · Cited by 383
Shi, Y., Sun, K., Huang, L., & Li, Y. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2168792 · Cited by 353
Da, Y., Shi, X., & Krishnamurthy, M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227808 · Cited by 303
Identification of Machine Parameters of a Synchronous Motor
Rahman, K. M., & Hiti, S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.844379 · Cited by 277
Feng, Y., Yu, X., & Han, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213561 · Cited by 273
Kivanc, O. C., & Ozturk, S. B. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2018.2817246 · Cited by 264
Rashed, M., MacConnell, P. F. A., Stronach, A. F., & Acarnley, P. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.895136 · Cited by 258
Temperature effects on torque production and efficiency of PM motors using NdFeB magnets
Sebastian, T. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.370284 · Cited by 246
Wallscheid, O., & Bocker, J. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2015.2473673 · Cited by 242
Online Identification of PMSM Parameters: Parameter Identifiability and Estimator Comparative Study
Boileau, T., Leboeuf, N., Nahid-Mobarakeh, B., & Meibody-Tabar, F. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2155010 · Cited by 229
Zafarani, M., Bostanci, E., Qi, Y., Goktas, T., & Akin, B. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2811538 · Cited by 208
Burth, M., Verghese, G. C., & Velez-Reyes, M. (1999) · IEEE Transactions on Power Systems · doi:10.1109/59.744536 · Cited by 201
Feng, G., Lai, C., Mukherjee, K., & Kar, N. C. (2016) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2538180 · Cited by 195
Survey of excitation signals for FFT based signal analyzers
Schoukens, J., Pintelon, R., der Ouderaa, E. V., & Renneboog, J. (1988) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.7453 · Cited by 185
Temperature effects on torque production and efficiency of PM motors using NdFeB magnets
Sebastian, T. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.298907 · Cited by 167
Dynamic Permanent Magnet Flux Estimation of Permanent Magnet Synchronous Machines
Xiao, X., Chen, C., & Zhang, M. (2010) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2010.2041435 · Cited by 157
Wang, Q., Zhang, G., Wang, G., Li, C., & Xu, D. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2900559 · Cited by 144
Mwasilu, F. A., & Jung, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2495240 · Cited by 143
Self-citationLiu, K., Feng, J., Guo, S., Xiao, L., & Zhu, Z. Q. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2722470 · Cited by 141
Kang, G.-H., Hur, J., Nam, H., Hong, J.-P., & Kim, G.-T. (2003) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2003.810330 · Cited by 139
Park, Y., Fernandez, D., Lee, S. B., Hyun, D., Jeong, M., Kommuri, S. K., Cho, C., Diaz Reigosa, D., & Briz, F. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2886772 · Cited by 116 · cited 1×
“magnetization can result in a sudden decrease in the amplitude of fundamental back electromotive force [137].”
BackgroundParameter Identification of PMSMs Using Experimental Measurements and a PSO Algorithm
Sandre-Hernández, O., Caporal, R. M., Rangel‐Magdaleno, J., Barreto, H. P., & Hernandez-Perez, J. N. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2390958 · Cited by 111
Fault Analysis and Parameter Identification of Permanent-Magnet Motors by the Finite-Element Method
Vaseghi, B., Takorabet, N., & Meibody-Tabar, F. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2022156 · Cited by 104
Inductance Identification and Study of PM Motor With Winding Turn Short Circuit Fault
Vaseghi, B., Nahid‐Mobarakeh, B., Takorabet, N., & Meibody‐Tabar, F. (2011) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2010.2083639 · Cited by 103
Khan, M. A., Husain, I., Islam, R., et al. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2271473 · Cited by 97
Nadarajan, S., Panda, S. K., Bhangu, B., & Gupta, A. K. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2535959 · Cited by 80
Magnetic Characteristics Investigation of an Axial-Axial Flux Compound-Structure PMSM Used for HEVs
Zheng, P., Zhao, J., Liu, R., Tong, C., & Wu, Q. (2010) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2010.2042042 · Cited by 79
Winding condition monitoring scheme for a permanent magnet machine using high-frequency injection
Arellano-Padilla, J., Sumner, M., & Gerada, C. (2011) · IET Electric Power Applications · doi:10.1049/iet-epa.2009.0264 · Cited by 76
Liu, Z., Li, X., Wu, L., Zhou, S., & Liu, K. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2424073 · Cited by 73
Permanent Magnet Temperature Estimation in PM Synchronous Motors Using Low-Cost Hall Effect Sensors
Fernández, D., Hyun, D., Park, Y., Reigosa, D., Lee, S. B., Lee, D.-M., & Briz, F. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2705580 · Cited by 66
Application of EKF to parameter and state estimation of PMSM drive
Salvatore, L., & Stasi, S. (1992) · IEE Proceedings B Electric Power Applications · doi:10.1049/ip-b.1992.0019 · Cited by 57
Feng, G., Lai, C., & Kar, N. C. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2616331 · Cited by 53
Liu, W., Liu, L., Chung, I., & Cartes, D. A. (2010) · Applied Soft Computing · doi:10.1016/j.asoc.2010.08.022 · Cited by 47
Estimating Permanent-Magnet Motor Parameters Under Inter-Turn Fault Conditions
Leboeuf, N., Boileau, T., Nahid‐Mobarakeh, B., Takorabet, N., Meibody‐Tabar, F., & Clerc, G. (2012) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2011.2177642 · Cited by 42
Stability and Persistent Excitation in Signal Sets
Lee, T.-C., Tan, Y., & Nešić, D. (2014) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2014.2370471 · Cited by 40
Effect of Rotor Geometry and Magnetic Saturation in Sensorless Control of PM Synchronous Machines
Sergeant, P., Belie, F. D., & Melkebeek, J. A. A. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2012809 · Cited by 39
Rafaq, M. S., Mohammed, S. A. Q., & Jung, J. (2019) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2019.2906649 · Cited by 31
Self-citationOn-line parameter estimation of PMSM in open loop and closed loop
Khov, M., Régnier, J., & Faucher, J. (2009) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2009.4939651 · Cited by 30
Liu, Z., Jing, J., Li, X., & Zhang, Y. (2012) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2012.6360923 · Cited by 4
Metadata
- Authors
- Rafaq, M. S., & Jung, J.-W.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2020-07
- Volume
- 16
- Issue
- 7
- Pages
- 4747-4758
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2977435692
- Cited by
- 266
- References
- 51
- FWCI
- 7.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.