CoChat

Joint-Angle Measurement Using Accelerometers and Gyroscopes—A Survey

Peng Cheng, Oelmann, B. · 2010 · IEEE Transactions on Instrumentation and Measurement

The DOI matches its Crossref record; 13 of the 14 references it cites were found in a registry or an index.

Abstract

This paper presents an analysis of rigid-body joint-angle measurement based on microelectromechanical-system (MEMS) biaxial accelerometers and uniaxial gyroscopes. In comparison to conventional magnetic and optical joint angular sensors, this new inertial sensing principle has the advantages of flexible installation and true contactless sensing. This paper focuses on the comparison of four different inertial-sensor combination methods that are reported in reference papers and utilizes the theory of rigid-body kinematics to explain and analyze their advantages and weaknesses. Experiments have also been conducted to further verify and strengthen the arguments put forward in the analysis. All experiments in this paper took place on a custom-built rigid-body robot arm model that can be manipulated by hand. Sensor calibration and accelerometer alignment issues are also described, and their details are discussed. The experiment results presented in this paper show significant differences with reference to the achieved angular accuracy for various situations when using the four different sensor combination methods. In some cases, the angular error based on one method is more than 0.04 rad, while that from another method is within ±0.005 rad. The noise levels of angular readings from different methods are also experimentally compared and analyzed. The conclusion drawn serves to guide readers toward a suitable method for their particular application.

Overview

Integrity signals

Registry

Crossref · 10.1109/tim.2009.2024367

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 5

  1. 2008, KXR94-2050
  2. 0, ADXRS612
  3. 0, ADS1274
  4. 0, Vert-X 22-24V
  5. 0, URM80CC

Cited by

See all 140

Metadata

Authors
Cheng, P., & Oelmann, B.
Affiliations
Mid Sweden University (SE)
Venue
IEEE Transactions on Instrumentation and Measurement
Published
2010-02
Volume
59
Issue
2
Pages
404-414
ISSN
  • 0018-9456 (ISSN-L)
  • 1557-9662
OpenAlex
W2116716880
Cited by
140
References
14
Citations by year
2026: 3 · 2025: 5 · 2024: 9 · 2023: 6 · 2022: 5 · 2021: 9 · 2020: 7 · 2019: 12 · 2018: 5 · 2017: 13 · 2016: 10 · 2015: 16 · 2014: 12 · 2013: 10 · 2012: 9
FWCI
11.65
Type
journal article
Language
en
Open access
closed
Locations
IEEE Transactions on Instrumentation and Measurement (publishedVersion)
Topics
  • Physical Sciences › Engineering › Aerospace Engineering › Inertial Sensor and Navigation
  • Physical Sciences › Engineering › Control and Systems Engineering › Robotic Mechanisms and Dynamics
  • Physical Sciences › Physics and Astronomy › Instrumentation › Sensor Technology and Measurement Systems
Keywords
joint angle measurement, MEMS accelerometer, MEMS gyroscope, inertial sensors, sensor fusion, rigid body kinematics, non-contact sensing, sensor calibration, angular accuracy, angular noise, robot manipulators

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.