The DOI matches its Crossref record.
A Unique Fault-Tolerant Design for Flying Capacitor Multilevel Inverter
Abstract
This paper presents a unique design for flying capacitor type multilevel inverters with fault-tolerant features. When a single-switch fault per phase occurs, the new design can still provide the same number of converting levels by shorting the fault power semiconductors and reconfiguring the gate controls. The most attractive point of the proposed design is that it can undertake the single-switch fault per phase without sacrificing power converting quality. Future more, if multiple faults occur in different phases and each phase have only one fault switch, the proposed design can still conditionally provide consistent voltage converting levels. This paper will also discuss the capacitor balancing approach under fault-conditions, which is an essential part of controlling flying capacitor type multilevel inverters. Suggested fault diagnosing methods are also discussed in this paper. Computer simulation and lab results validate the proposed controls.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The age of multilevel converters arrives
Franquelo, L., Rodriguez, J., Leon, J., Kouro, S., Portillo, R., & Prats, M. (2008) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2008.923519 · Cited by 2,016
Multilevel Converters: An Enabling Technology for High-Power Applications
Rodriguez, J., Franquelo, L. G., Kouro, S., Leon, J. I., Portillo, R. C., Prats, M. A. M., & Perez, M. A. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2030235 · Cited by 1,196
Multilevel Inverter Topologies With Reduced Device Count: A Review
Gupta, K. K., Ranjan, A., Bhatnagar, P., Sahu, L. K., & Jain, S. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2405012 · Cited by 1,193
Survey on Reliability of Power Electronic Systems
Song, Y., & Wang, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192503 · Cited by 861
Survey on Fault-Tolerant Techniques for Power Electronic Converters
Zhang, W., Xu, D., Enjeti, P. N., Li, H., Hawke, J. T., & Krishnamoorthy, H. S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2304561 · Cited by 587
A Switched-Capacitor Inverter Using Series/Parallel Conversion With Inductive Load
Hinago, Y., & Koizumi, H. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2158768 · Cited by 535
A General Review of Multilevel Inverters Based on Main Submodules: Structural Point of View
Vijeh, M., Rezanejad, M., Samadaei, E., & Bertilsson, K. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2890649 · Cited by 473
Survey of fault-tolerance techniques for three-phase voltage source inverters
Mirafzal, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301712 · Cited by 440
A Single-Phase Multilevel Inverter Using Switched Series/Parallel DC Voltage Sources
Hinago, Y., & Koizumi, H. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030204 · Cited by 430
A Review of Multilevel Inverter Topologies in Electric Vehicles: Current Status and Future Trends
Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3063550 · Cited by 424
Fault-Tolerant Design and Control Strategy for Cascaded H-Bridge Multilevel Converter-Based STATCOM
Song, W., & Huang, A. Q. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036019 · Cited by 358
Fault Diagnosis and Reconfiguration for Multilevel Inverter Drive Using AI-Based Techniques
Khomfoi, S., & Tolbert, L. M. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.906994 · Cited by 284
Diagnosis and Tolerant Strategy of an Open-Switch Fault for T-Type Three-Level Inverter Systems
Choi, U.-M., Lee, K.-B., & Blaabjerg, F. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2269531 · Cited by 257
Reliability Calculation of Multilevel Converters: Theory and Applications
Richardeau, F., & Pham, T. T. L. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2211315 · Cited by 212
Li, J., Huang, A. Q., Liang, Z., & Bhattacharya, S. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143430 · Cited by 211
Performance Evaluation of Fault-Tolerant Neutral-Point-Clamped Converters
Ceballos, S., Pou, J., Robles, E., Zaragoza, J., & Martín, J. L. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2026710 · Cited by 124
Metadata
- Authors
- Kou, X., Corzine, K. A., & Familiant, Y. L.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2004-07
- Volume
- 19
- Issue
- 4
- Pages
- 979-987
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2099724669
- Cited by
- 185
- References
- 0
- FWCI
- 5.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.