The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Abstract
A new inductive power transfer system with a narrow rail width, a small pickup size, and a large air gap for online electric vehicles is proposed in this paper. By introducing a new core structure, the orientation of the magnetic flux alternates along with the road; hence, an inductive power transfer system with a narrow rail width of 10 cm, a large air gap of 20 cm, and a large lateral displacement about 24 cm was implemented. The resonant circuit of the inductive power transfer system, driven by a current source, was fully characterized. The experimental results showed that the maximum output power was 35 kW and that the maximum efficiency was 74% at 27 kW. The proposed system was found to be adequate for electric vehicles, allowing them to drive freely on specially implemented roads by obtaining power from the buried power supply rail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comparison of half-bridge resonant converter topologies
Steigerwald, R. L. (1988) · IEEE Transactions on Power Electronics · doi:10.1109/63.4347 · Cited by 1,972
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
Cannon, B. L., Hoburg, J. F., Stancil, D. D., & Goldstein, S. C. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2017195 · Cited by 924
A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.904025 · Cited by 439
10 kHz inductively coupled power transfer - concept and control
Green, A. W. (1994) · Proceedings of 5th International Conference on Power Electronics and Variable-Speed Drives · doi:10.1049/cp:19941049 · Cited by 300
On-Line Electric Vehicle using inductive power transfer system
Lee, S., Huh, J., Park, C., Choi, N.-S., Cho, G.-H., & Rim, C.-T. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5618092 · Cited by 277
Self-citationAnalysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
Compact contactless power transfer system for electric vehicles
Nagatsuka, Y., Ehara, N., Kaneko, Y., Abe, S., & Yasuda, T. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5543313 · Cited by 245
Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer Systems
Elliott, G., Raabe, S., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031184 · Cited by 234
Interphase Mutual Inductance in Polyphase Inductive Power Transfer Systems
Kissin, M. L. G., Boys, J. T., & Covic, G. A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2020076 · Cited by 165
Resonant Contactless Energy Transfer With Improved Efficiency
Valtchev, S., Borges, B. V., Brandisky, K., & Klaassens, J. B. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2003188 · Cited by 159
A Series-Tuned Inductive-Power-Transfer Pickup With a Controllable AC-Voltage Output
Wu, H. H., Covic, G. A., Boys, J. T., & Robertson, D. J. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2052069 · Cited by 154
Inductive power coupling for an electric highway system
Bolger, J., Kirsten, F. A., & Ng, L. S. (1978) · IEEE Vehicular Technology Conference · doi:10.1109/vtc.1978.1622522 · Cited by 111
Unified General Phasor Transformation for AC Converters
Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2107920 · Cited by 90
Self-citationMagnetically coupled systems for power transfer to electric vehicles
Elliott, G. A. J., Boys, J. T., & Green, A. W. (2002) · International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.1995.404968 · Cited by 90
A Family of Single-Stage Resonant AC/DC Converters With PFC
O’Sullivan, D. L., Egan, M. G., & Willers, M. J. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005521 · Cited by 66
Zell, C. E., & Bolger, J. (1982) · IEEE Vehicular Technology Conference · doi:10.1109/vtc.1982.1623054 · Cited by 48
Moon, C. H., Park, H. W., & Lee, S. Y. (1999) · Measurement Science and Technology · doi:10.1088/0957-0233/10/12/402 · Cited by 26
Self-citation
Cited by
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Covic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Metadata
- Authors
- Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-12
- Volume
- 26
- Issue
- 12
- Pages
- 3666-3679
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2122295502
- Cited by
- 669
- References
- 19
- FWCI
- 21.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.