The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Analysis and Tracking of Optimal Load in Wireless Power Transfer Systems
Abstract
All the wireless power transfer (WPT) systems share a similar configuration including a power source, a coupling system, a rectifying circuit, a power regulating, and charging management circuit and a load. For such a system, both a circuit- and a system-level analyses are important to derive requirements for a high overall system efficiency. Besides, unavoidable uncertainties in a real WPT system require a feedback mechanism to improve the robustness of the performance. Based on the above basic considerations, this paper first provides a detailed analysis on the efficiency of a WPT system at both circuit and system levels. Under a specific mutual inductance between the emitting and receiving coils, an optimal load resistance is shown to exist for a maximum overall system efficiency. Then, a perturbation-and-observation-based tracking system is developed through additional hardware such as a cascaded boost-buck dc-dc converter, an efficiency sensing system, and a controller. Finally, a 13.56-MHz WPT system is demonstrated experimentally to validate the efficiency analysis and the tracking of the optimal load resistances. At a power level of 40 W, the overall efficiency from the power source to the final load is maintained about 70% under various load resistances and relative positions of coils.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1963) · Journal of the Franklin Institute · doi:10.1016/0016-0032(63)90675-6 · Cited by 5,770
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Reza Reisi, A., Hassan Moradi, M., & Jamasb, S. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.052 · Cited by 690
Low, Z. N., Chinga, R. A., Tseng, R., & Lin, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010110 · Cited by 528
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249112 · Cited by 505
Beh, T. C., Kato, M., Imura, T., Oh, S., & Hori, Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2206337 · Cited by 502
Shinohara, N. (2011) · IEEE Microwave Magazine · doi:10.1109/mmm.2011.942732 · Cited by 385
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Maximizing DC-to-Load Efficiency for Inductive Power Transfer
Pinuela, M., Yates, D. C., Lucyszyn, S., & Mitcheson, P. D. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2215887 · Cited by 354
Feedback Analysis and Design of RF Power Links for Low-Power Bionic Systems
Baker, M. W., & Sarpeshkar, R. (2007) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2007.893180 · Cited by 317
A Cascaded Boost–Buck Converter for High-Efficiency Wireless Power Transfer Systems
Fu, M., Ma, C., & Zhu, X. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2291682 · Cited by 272
Self-citationZhong, W. X., Liu, X., & Hui, S. Y. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098379 · Cited by 263
Lee, S.-H., & Lorenz, R. D. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2168555 · Cited by 247
Investigating an LCL Load Resonant Inverter for Inductive Power Transfer Applications
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830098 · Cited by 242
Choi, B., Nho, J., Cha, H., Ahn, T., & Choi, S. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822039 · Cited by 237
Enabling Seamless Wireless Power Delivery in Dynamic Environments
Sample, A. P., Waters, B. H., Wisdom, S. T., & Smith, J. R. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2252453 · Cited by 191
Design and Optimization of a Class-E Amplifier for a Loosely Coupled Planar Wireless Power System
Casanova, J., Low, Z. N., & Lin, J. (2009) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2009.2032465 · Cited by 95
Cited by
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Mai, R., Liu, Y., Li, Y., Yue, P., Cao, G., & He, Z. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2665040 · Cited by 360
Control design for optimizing efficiency in inductive power transfer systems
Huang, Z., Wong, S.-C., & Tse, C. K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2724039 · Cited by 242
Metadata
- Authors
- Fu, M., Yin, H., Zhu, X., & Ma, C.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2015-07
- Volume
- 30
- Issue
- 7
- Pages
- 3952-3963
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1989566060
- Cited by
- 330
- References
- 20
- FWCI
- 13.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.