The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Design and Experimental Testing of a Resonant DC–DC Converter for Solid-State Transformers
Abstract
In the solid-state transformer (SST) concept, the key task of voltage adaptation and isolation is performed by a high-power dc-dc converter, which is operated in the medium-frequency range, hence enabling a reduction in size and weight of the converter's reactive components. This dc-dc converter presents the main challenge in the implementation of the SST concept, given its operation at medium frequency together with the direct connection to medium voltage. This combination demands the utilization of dc-dc converter topologies that are able to operate in the soft-switching mode, whereby, given that typically insulated-gate bipolar transistor switches are used as power devices, zero-current switching modulation schemes become highly attractive and often mandatory in order to achieve the targeted efficiency goals. This paper describes in detail the analysis and design of a 166-kW/20-kHz dc-dc converter of the series-resonant type, which results to be particularly interesting for high-power applications, given its tight input-to-output transfer characteristics and its capability to ensure soft-switching transitions of all semiconductor devices. The main focus of this paper is to describe in detail the practical implementation of the aforementioned resonant dc-dc converter, where its main components, i.e., the medium- and low-voltage-side power bridges and the medium-frequency transformer, are described independently. The assembled prototype is presented together with the implemented testing strategy and the final experimental results.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These designs have power rating exceeding 50 kW, and the operating frequency is in the range of 1.75 kHz and 22 kHz [8-14].”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [10]
In the citing paper
“Ferrite and nanocrystalline-based MF transformers differ in cooling system design, and ultimately in power density.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [10]
Citations
Cites
A comparison of half-bridge resonant converter topologies
Steigerwald, R. L. (1988) · IEEE Transactions on Power Electronics · doi:10.1109/63.4347 · Cited by 1,972 · cited 17×
“input-to-output voltage gain and soft-switching behavior over the whole operating range is the series-resonant converter (SRC) operated in the subresonant mode [17], [18].”
BackgroundMethodInfluentialDragicevic, T., Vasquez, J. C., Guerrero, J. M., & Skrlec, D. (2014) · IEEE Electrification Magazine · doi:10.1109/mele.2013.2297033 · Cited by 376 · cited 1×
“A possible implementation of this concept is clearly visualized in local microgrids [13], battery charging facilities, and”
BackgroundMedium frequency topology in railway applications
Steiner, M., & Reinold, H. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417570 · Cited by 249 · cited 1×
“In order to reduce the size and, consequently, the weight of this energy supply chain, strong efforts are being placed by traction manufacturers to incorporate highly compact and efficient energy conversion chains based on SST technology into their high-performance solutions [1], [3]–[8].”
BackgroundA complete DC analysis of the series resonant converter
Vorperian, V., & Cuk, S. (1982) · 1982 IEEE Power Electronics Specialists conference · doi:10.1109/pesc.1982.7072398 · Cited by 213 · cited 1×
“Utilizing the known formulas for the HC-DCM-SRC [17], [18], [20], the design parameters shown in Table I are calculated for a 166-kW/20-kHz HC-DCM-SRC prototype, whereby a detailed description of the converter’s design is presented herein.”
MethodA new approach to power supplies for robots
Esser, A., & Skudelny, H.-C. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.90341 · Cited by 164
An actively cooled high power, high frequency transformer with high insulation capability
Heinemann, L. (2003) · APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335) · doi:10.1109/apec.2002.989270 · Cited by 135
Ortiz, G., Uemura, H., Bortis, D., Kolar, J. W., & Apeldoorn, O. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2223215 · Cited by 126 · cited 4×
“frequency and the rather long time constants associated with the stored charge dynamics of IGBT switches in this voltage class [21].”
BackgroundMethodSelf-citationOrtiz, G., Leibl, M., Kolar, J. W., & Apeldoorn, O. (2013) · 2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds.2013.6527217 · Cited by 126 · cited 2×
“All details about the aforementioned optimization procedure together with a comprehensive overview of previously reported transformer concepts and extensive experimental results about this nanocrystalline water-cooled transformer prototype can be found in [15] and [27].”
BackgroundSelf-citationThe universal power electronics based distribution transformer, an unified approach
Heinemann, L., & Mauthe, G. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2001.954164 · Cited by 109 · cited 1×
“On the other hand, SSTs are considered to be one of the key enabling technologies for the implementation of the future electric power system architecture: the smart grid [10]–[12].”
BackgroundPower Electronics Technologies for Railway Vehicles
Taufiq, J. (2007) · 2007 Power Conversion Conference - Nagoya · doi:10.1109/pccon.2007.373146 · Cited by 82
Research works printed but not linked: 3
- huber, 0, Volume/weight/cost comparison of 1MVA 10 kV/400 V solid-state and conventional low-frequency distribution network, Proc IEEE Energy Convers Congr Expo, 4545
- engel, 0, 15 kV/16.7 Hz energy supply system with medium frequency transformer and 6.5 KV IGBTS in resonant operation, Proc Eur Conf Power Electron Appl, 2
- lindenmuller, 0, Optimization of a series resonant DC/DC converter for traction applications, Proc IEEE Energy Convers Congr Expo, 2201
Cited by
Hannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
High-Frequency Transformer Design for Modular Power Conversion From Medium-Voltage AC to 400 VDC
Zhao, S., Li, Q., Lee, F. C., & Li, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2774440 · Cited by 231
“FREEDM Gen ETH Design CPES III [12] [14]–[16] Design”
BackgroundMethodInfluentialHigh-Efficiency SiC-Based Isolated Three-Port DC/DC Converters for Hybrid Charging Stations
Dao, N. D., Lee, D.-C., & Phan, Q. D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2975124 · Cited by 174
“density, and lowEMI [27]–[29].”
A Medium-Voltage Medium-Frequency Isolated DC–DC Converter Based on 15-kV SiC MOSFETs
Wang, L., Zhu, Q., Yu, W., & Huang, A. Q. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2639381 · Cited by 124
Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
“The designs in [9] and [10] present two transformers for 166 kW/20 kHz based on two different core materials.”
Background
Metadata
- Authors
- Ortiz, G., Leibl, M. G., Huber, J. E., & Kolar, J. W.
- Affiliations
- ETH Zurich (CH)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-10
- Volume
- 32
- Issue
- 10
- Pages
- 7534-7542
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2560492545
- Cited by
- 143
- References
- 23
- Citations by year
- 2026: 4 · 2025: 13 · 2024: 21 · 2023: 16 · 2022: 18 · 2021: 21 · 2020: 16 · 2019: 12 · 2018: 16 · 2017: 5
- FWCI
- 5.23
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- solid-state transformer, series resonant DC-DC converter, zero-current switching, soft switching, voltage isolation, IGBT, medium frequency transformer, converter design, high-power converters, prototype testing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design and Experimental Testing of a Resonant DC–DC Converter for Solid-State Transformers. https://app.cochat.ai/papers/10.1109/tpel.2016.2637827
- The paper
- Ortiz, G., Leibl, M. G., Huber, J. E., & Kolar, J. W. (2017). Design and Experimental Testing of a Resonant DC–DC Converter for Solid-State Transformers. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2016.2637827
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.