The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
100 kW, 10 kHz Medium-Frequency Transformer Design Optimization and Experimental Verification
Open accessAbstract
This paper describes a novel, model-based, and design optimization methodology for high-power medium-frequency transformers (MFTs) for medium-voltage high-power electronic applications, namely emerging solid-state transformers. Presented procedure enables the designer to interactively select the most optimal design in a simple and intuitive way, while inherently offering flexibility in terms of various design alternatives, depending on the component availability. The core of the design algorithm is explained in detail together with all of the relevant modeling and technical challenges associated with realization of a prototype. A 100 kW, 10 kHz MFT prototype has been designed, according to the presented algorithm, practically realized and thoroughly tested in order to verify the theoretical design.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“ABB [8] [13, 14] presents the PD test for their MFTs at 38kV, 35kV, and 30kV to prove the design, but no detailed optimal design for electric field distribution under bipolar PWM excitation is discussed.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [14]
In the citing paper
“These designs have power rating exceeding 50 kW, and the operating frequency is in the range of 1.75 kHz and 22 kHz [8-14].”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [14]
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
White, F. M. (1974) · Cited by 5,899
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Effects of eddy currents in transformer windings
Dowell, P. L. (1966) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1966.0236 · Cited by 1,438
Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H. (2003) · 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings. · doi:10.1109/cipe.2002.1196712 · Cited by 1,145
1Kron Reduction of Graphs with Applications to Electrical Networks
Bullo, F. (2015) · Cited by 821
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. A. A. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.936396 · Cited by 704
Inductors and Transformers for Power Electronics
Valchev, V. C., & Van den Bossche, A. (2018) · CRC Press eBooks · doi:10.1201/9781420027280 · Cited by 562
Optimal choice for number of strands in a litz-wire transformer winding
Sullivan, C. R. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.750181 · Cited by 558
Power Electronic Traction Transformer—Medium Voltage Prototype
Zhao, C., Dujic, D., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2278960 · Cited by 478
Lin, D., Zhou, P., Fu, W. N., Badics, Z., & Cendes, Z. J. (2004) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2004.825025 · Cited by 425
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409
Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms
Hurley, W. G., Gath, E., & Breslin, J. G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838110 · Cited by 368
Kulkarni, S. V., & Khaparde, S. A. (2004) · CRC Press eBooks · doi:10.1201/9780367800598 · Cited by 351
Power Electronic Traction Transformer-Low Voltage Prototype
Dujic, D., Zhao, C., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2248756 · Cited by 293
Huber, J. E., & Kolar, J. W. (2014) · 2014 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954023 · Cited by 264
Accurate analytical model of winding losses in round Litz wire windings
Tourkhani, F., & Viarouge, P. (2001) · IEEE Transactions on Magnetics · doi:10.1109/20.914375 · Cited by 230
Winding resistance of litz-wire and multi-strand inductors
Wojda, R. P., & Kazimierczuk, M. K. (2012) · IET Power Electronics · doi:10.1049/iet-pel.2010.0359 · Cited by 217
A 10-kV/400-V 500-kVA Electronic Power Transformer
Wang, D., Tian, J., Mao, C., Lu, J., Duan, Y., Qiu, J. X., & Cai, H. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2586440 · Cited by 159
Power electronic traction transformer technology
Dujić, D., Kieferndorf, F. D., Canales, F., & Drofenik, U. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/ipemc.2012.6258820 · Cited by 129
Multiphysical Characterization of Medium-Frequency Power Electronic Transformers
Villar, I. (2010) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-4622 · Cited by 92
Medium frequency transformer leakage inductance modeling and experimental verification
Mogorovic, M., & Dujić, D. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8095813 · Cited by 71
Self-citationThermal modeling and experimental verification of an air cooled medium frequency transformer
Mogorovic, M., & Dujić, D. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099176 · Cited by 53
Self-citationBahmani, A. (2016) · Chalmers Research (Chalmers University of Technology) · Cited by 45
High-Power DC-DC Converter Technologies for Smart Grid and Traction Applications
Ortiz, G. (2014) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-010213553 · Cited by 44
Thummala, P., Schneider, H., Zhang, Z., Ouyang, Z., Knott, A., & Andersen, M. A. E. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2379439 · Cited by 32
Sullivan, C. R., Abdallah, T., & Fujiwara, T. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2001.911636 · Cited by 24
Dimitrakakis, G. S., Tatakis, E. C., & Rikos, E. (2007) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417574 · Cited by 22
Derivation of optimum winding thickness for duty cycle modulated current waveshapes
Breslin, J. G., & Hurley, W. G. (2002) · PESC record · doi:10.1109/pesc.1997.616791 · Cited by 16
Computer aided high frequency transformer design using an optimized methodology
Breslin, J. G., & Hurley, W. G. (2002) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/cipe.2000.904729 · Cited by 14
The optimization of high frequency inductors with litz-wire windings
Stadler, A. (2013) · International Conference-Workshop Compatibility and Power Electronics (CPE) · doi:10.1109/cpe.2013.6601156 · Cited by 11
Research works printed but not linked: 3
- 10.1109/TCSI.2012.2215780 · DOI
- mclyman, 1993, Designing Magnetic Components for High-Frequency DC– DC Converters
- 0, Convection from a Rectangular Plate
Cited by
Artificial Neural Network (ANN) Based Fast and Accurate Inductor Modeling and Design
Guillod, T., Papamanolis, P., & W. Kolar, J. (2020) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2020.3012777 · Cited by 264
High-Efficiency Hybrid LLC Resonant Converter for On-Board Chargers of Plug-In Electric Vehicles
Ta, L. A. D., Dao, N. D., & Lee, D.-C. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2968084 · Cited by 228
Soft magnetic materials and their applications in transformers
Ram, B. S., Paul, A. K., & Kulkarni, S. V. (2021) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2021.168210 · Cited by 148
Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
Li, Z., Hsieh, E., Li, Q., & Lee, F. C. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3279030 · Cited by 111
Metadata
- Authors
- Mogorovic, M., & Dujic, D.
- Affiliations
- École Polytechnique Fédérale de Lausanne (CH)
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2019-02
- Volume
- 34
- Issue
- 2
- Pages
- 1696-1708
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2800919180
- Cited by
- 274
- References
- 31
- Citations by year
- 2026: 19 · 2025: 24 · 2024: 37 · 2023: 43 · 2022: 36 · 2021: 44 · 2020: 56 · 2019: 13
- FWCI
- 11.00
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Licence
- Locations
- IEEE Transactions on Power Electronics (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- medium frequency transformer, solid-state transformer, transformer design optimization, model-based design, transformer modeling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.