A Power Electronic Traction Transformer Configuration With Low-Voltage IGBTs for Onboard Traction Application
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Solid-State transformer for onboard traction application is also addressed as power electronic traction transformer (PETT), which is used to replace the line frequency traction transformer and four-quadrant converter to further improve efficiency, save installation space, and reduce weight of the onboard equipment. However, based on the conventional PETT configuration with the modular series-parallel structure, it is hard to guarantee the high efficiency and high power density at the same time due to the limitations caused by the switching characteristics of the semiconductor devices, transformer design, and high-voltage insulation design. To deal with the mentioned problem, a PETT configuration and the parameters' design method for onboard traction application are proposed in this paper to replace the conventional dc/dc stage with the low-voltage insulated gate bipolar translator (IGBTs). By using the proposed configuration, the high-voltage IGBTs can be replaced by the low-voltage IGBTs, which can help reduce switching loss. Meanwhile, zero-current switching or zero-voltage switching for all the IGBTs can be guaranteed, and the number of the medium-frequency transformers (MFTs) will not increase. Therefore, a multiple optimization of PETT, including switching losses, the number of MFTs and switches, and costs, can be finally achieved. Finally, an experimental prototype is built to verify the performance of the proposed PETT configuration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Future Renewable Electric Energy Delivery and Management (FREEDM) System: The Energy Internet
Huang, A. Q., Crow, M. L., Heydt, G. T., Zheng, J. P., & Dale, S. J. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2081330 · Cited by 1,463 · cited 1×
“One is to improve power control performance and achieve interconnection, such as for the distribution grid [1]–[3] and dc microgrid [4], [5].”
BackgroundVoltage and Power Balance Control for a Cascaded H-Bridge Converter-Based Solid-State Transformer
Zhao, T., Wang, G., Bhattacharya, S., & Huang, A. Q. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2216549 · Cited by 642 · cited 1×
“To get the desired voltage, current and achieve the power balance of the different modules, many control strategies have been studied and presented by many experts and scholars [19], [31], [32].”
BackgroundApplicability of solid-state transformers in today's and future distribution grids
Huber, J. E., & Kolar, J. W. (2019) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2738610 · Cited by 506 · cited 1×
“Furthermore, since the allowable weight and volume of a traction transformer is limited, LFTTs tend to be quite inefficient (typically around 90% [12]), which further creates the motivation for the application of PET.”
BackgroundPower Electronic Traction Transformer—Medium Voltage Prototype
Zhao, C., Dujic, D., Mester, A., Steinke, J. K., Weiss, M., Lewdeni-Schmid, S., Chaudhuri, T., & Stefanutti, P. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2278960 · Cited by 478
Shang, Y., Zhang, C., Cui, N., & Guerrero, J. M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2345672 · Cited by 281 · cited 1×
“The basic voltage-balance principle of IVB unit and OVB unit are similar to switched capacitor based power conversion, which are studied in [29]-[30].”
BackgroundGu, C., Zheng, Z., Xu, L., Wang, K., & Li, Y. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2416212 · Cited by 221
Design and Experimental Testing of a Resonant DC–DC Converter for Solid-State Transformers
Ortiz, G., Leibl, M. G., Huber, J. E., & Kolar, J. W. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2637827 · Cited by 143 · cited 1×
“4% according to [25], and the difference of the copper losses for these topologies is ignored.”
BackgroundPower Electronics Technologies for Railway Vehicles
Taufiq, J. (2007) · 2007 Power Conversion Conference - Nagoya · doi:10.1109/pccon.2007.373146 · Cited by 82
Cited by
Soft-Switching Solid-State Transformer With Reduced Conduction Loss
Zheng, L., Kandula, R. P., & Divan, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3030795 · Cited by 105
“frequency transformer in distribution grid [1]–[4], data center [5]–[7], renewable energy sources and energy storage integration [8], traction [9], and other applications [10]–[12].”
BackgroundHigh Efficiency Integrated Transformer Design in DAB Converters for Solid-State Transformers
Lee, E. S., Park, J. H., Kim, M. Y., & Lee, J. S. (2022) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2022.3168561 · Cited by 63
High-Efficiency Module Design of Solid-State Transformers for Railway Vehicles
Lee, E. S., Park, J. H., Kim, M. Y., & Lee, J. S. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3101733 · Cited by 36
Metadata
- Authors
- Zhang, J., Liu, J., Zhong, S., Yang, J., Zhao, N., & Zheng, T. Q.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2019-09
- Volume
- 34
- Issue
- 9
- Pages
- 8453-8467
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2906276923
- Cited by
- 64
- References
- 8
- FWCI
- 1.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Power Electronic Traction Transformer Configuration With Low-Voltage IGBTs for Onboard Traction Application. https://app.cochat.ai/papers/10.1109/tpel.2018.2889107
- The paper
- Zhang, J., Liu, J., Zhong, S., Yang, J., Zhao, N., & Zheng, T. Q. (2019). A Power Electronic Traction Transformer Configuration With Low-Voltage IGBTs for Onboard Traction Application. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2018.2889107
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.