Reduced Switching-Frequency Modulation and Circulating Current Suppression for Modular Multilevel Converters
The DOI matches its Crossref record; 21 of the 22 references it cites were found in a registry or an index.
Abstract
This paper describes a modified phase-shifted carrier-based pulsewidth-modulation (PSC-PWM) scheme for modular multilevel converters (MMC). In order to reduce the average device switching frequency, a reduced switching-frequency (RSF) voltage balancing algorithm is developed. This paper also proposes a circulating current suppressing controller (CCSC) to minimize the inner circulating current in an MMC. Based on the double line-frequency, negative-sequence rotational frame, the three-phase alternative circulating currents are decomposed into two dc components and are minimized by a pair of proportional integral controllers. Simulation results based on a detailed PSCAD/EMTDC model prove the effectiveness of the modified PSC-PWM method and the RSF voltage-balancing algorithm. The proposed CCSC not only eliminates the inner circulating current but also improves the quality of the converter ac output voltage. A simple loss evaluation demonstrates that the RSF voltage-balancing algorithm and the CCSC reduce the converter power losses.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An innovative modular multilevel converter topology suitable for a wide power range
Lesnicar, A., & Marquardt, R. (2004) · 2003 IEEE Bologna Power Tech Conference Proceedings, · doi:10.1109/ptc.2003.1304403 · Cited by 2,908 · cited 1×
“Basic concepts and operation principles of MMC were studied in [7]–[10].”
BackgroundControl and Experiment of Pulsewidth-Modulated Modular Multilevel Converters
Hagiwara, M., & Akagi, H. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2014236 · Cited by 1,565 · cited 2×
“Reference [ 5 ] applied the PWM scheme to MMC with averaging and balancing controls and the results were verified by simulations and experiments.”
BackgroundMethodDynamic Performance of a Modular Multilevel Back-to-Back HVDC System
Saeedifard, M., & Iravani, R. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2050787 · Cited by 1,188 · cited 1×
“a back-to-back MMC-HVDC under balanced and unbalanced conditions are investigated in [17].”
Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters
Rohner, S., Bernet, S., Hiller, M., & Sommer, R. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031187 · Cited by 934 · cited 5×
“The voltage-balancing algorithm, by sorting the capacitors’ voltages, is proposed in [9], [12].”
MethodInfluentialA new mathematical model and control of a three-phase AC-DC voltage source converter
Blasko, V., & Kaura, V. (1997) · IEEE Transactions on Power Electronics · doi:10.1109/63.554176 · Cited by 871
On dynamics and voltage control of the Modular Multilevel Converter
Antonopoulos, A., Ängquist, L., & Nee, H. (2009) · European Conference on Power Electronics and Applications · Cited by 831
New transformerless, scalable Modular Multilevel Converters for HVDC-transmission
Allebrod, S., Hamerski, R., & Marquardt, R. (2008) · 2008 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2008.4591920 · Cited by 785
A New AC/AC Multilevel Converter Family
Glinka, M., & Marquardt, R. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.843973 · Cited by 772 · cited 3×
“11(b) uses the modified PSC-PWM method with the conventional voltage-balancing algorithm proposed in [9] and [12] whereas Fig.”
MethodGnanarathna, U. N., Gole, A. M., & Jayasinghe, R. P. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2060737 · Cited by 739
Control and Performance of a Transformerless Cascade PWM STATCOM With Star Configuration
Akagi, H., Inoue, S., & Yoshii, T. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900487 · Cited by 643 · cited 1×
“topology in STATCOM applications [4], the amount of the capacitors is doubled in MMC, since it uses the half H-bridge submodules.”
Method
Research works printed but not linked: 7
- backlund, 2004, Data sheet IGBT module 5SNA 1200E250100
- backlund, 2009, Application note Applying IGBTs
- 2001, Stromrichterschaltungen mit verteilten Energiespeichern
- dorn, 2007, Novel voltage-sourced converters for HVDC and FACTS applications, CIGRE Symp
- lesnicar, 2008, Neuartiger modularer mehrpunktumrichter M2C fr netzkupplungsanwendungen
- 2005, VSC transmission
- 2008, Drive for a phase module branch of a multilevel converter
Cited by
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210
Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346
“A low-frequency modulation can be also integrated with the voltage balancing by modifying the switching instants of the switching pattern for each cell [65].”
BackgroundDynamic Analysis of Modular Multilevel Converters
Harnefors, L., Antonopoulos, A., Norrga, S., Angquist, L., & Nee, H.-P. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2194974 · Cited by 623
Detailed and Averaged Models for a 401-Level MMC–HVDC System
Peralta, J., Saad, H., Dennetiere, S., Mahseredjian, J., & Nguefeu, S. (2012) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2012.2188911 · Cited by 623
“Circulating currents can be eliminated by using an active control over the modulated voltage [27], [28] or by adding a parallel capacitor (resonant filter) between the midpoints of the upper and lower arm inductances on each phase [20].”
BackgroundMethodDekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
Metadata
- Authors
- Tu, Q., Xu, Z., & Xu, L.
- Affiliations
- Zhejiang University (CN)
- Queen's University Belfast (GB)
- Venue
- IEEE Transactions on Power Delivery
- Published
- 2011-07
- Volume
- 26
- Issue
- 3
- Pages
- 2009-2017
- ISSN
- 0885-8977 (ISSN-L)
- 1937-4208
- OpenAlex
- W2021871997
- Cited by
- 1,387
- References
- 22
- Citations by year
- 2026: 18 · 2025: 57 · 2024: 57 · 2023: 86 · 2022: 84 · 2021: 87 · 2020: 127 · 2019: 118 · 2018: 146 · 2017: 136 · 2016: 122 · 2015: 122 · 2014: 120 · 2013: 71 · 2012: 30
- FWCI
- 50.85
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Power Delivery (publishedVersion)
- Research Portal (Queen's University Belfast) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- modular multilevel converter, switching frequency reduction, circulating current suppression, PI controller, converter losses
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.