Pulse-Width-Modulation-Based Electromagnetic Interference Mitigation of Bidirectional Grid-Connected Converters for Electric Vehicles
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
This paper proposes a new pulse-width-modulation (PWM) technique for the electromagnetic interference (EMI) mitigation of the bidirectional grid-connected converter, which is aiming to improve the power quality of power grids and the working environment of electric vehicles (EVs), as well as the implementability especially for high-frequency applications. Due to the frequent energy exchange in vehicle-to-grid (V2G) systems, the EV electromagnetic environment becomes increasingly complex, which may impair the normal operation of various auxiliary electronic devices and hence reduce the stability of EVs. Additionally, the conducted EMI deteriorates the power supply quality in the power grid. In this paper, a PWM-based EMI mitigation technique is proposed for the bidirectional grid-connected converter to suppress exaggerated peaky EMI and evenly distribute the harmonics over a wide frequency range, thereby improving the electromagnetic compatibility of the grid-connected converter. Also, the simulation and experiment are both conducted to illustrate the effectiveness of the proposed PWM-based EMI mitigation technique for the V2G bidirectional grid-connected power converter.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Integration of electric vehicles in the electric power system
Lopes, J. A. P., Soares, F. J., & Almeida, P. M. R. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2066250 · Cited by 1,465 · cited 1×
“GRID-CONNECTED power converter offers the electric vehicle (EV) the ability of exchanging the energy with the power grid, which can alleviate the peak load in the power system [1], [2].”
BackgroundModern Electric Vehicle Technology
Chan, C. C., & Chau, K. T. (2001) · doi:10.1093/oso/9780198504160.001.0001 · Cited by 572
Self-citationConducted EMI Mitigation Techniques for Switch-Mode Power Converters: A Survey
Mainali, K., & Oruganti, R. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2047734 · Cited by 356
Optimal Energy Management for a Residential Microgrid Including a Vehicle-to-Grid System
Igualada, L., Corchero, C., Cruz-Zambrano, M., & Heredia, F.-J. (2014) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2318836 · Cited by 285 · cited 1×
“2541163 is also important for improving the power quality of the power system [3], [4].”
BackgroundCapacity Estimation for Vehicle-to-Grid Frequency Regulation Services With Smart Charging Mechanism
Lam, A. Y. S., Leung, K.-C., & Li, V. O. K. (2016) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2015.2436901 · Cited by 203 · cited 2×
“2541163 is also important for improving the power quality of the power system [3], [4].”
BackgroundHu, J., & Zhu, Z. Q. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2194512 · Cited by 170 · cited 1×
“energies [15], [16].”
Generalization of active filters for EMI reduction and harmonics compensation
Son, Y.-C., & Sul, S. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.870030 · Cited by 168
Hopf bifurcation and chaos in a free-running current-controlled Cuk switching regulator
Tse, C. K., Lai, Y. M., & Iu, H. H. (2000) · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · doi:10.1109/81.841847 · Cited by 140
Tani, A., Camara, M. B., Dakyo, B., & Azzouz, Y. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2225632 · Cited by 121
Bifurcation behavior in parallel-connected buck converters
Iu, H. H., & Tse, C. K. (2001) · IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications · doi:10.1109/81.904890 · Cited by 118
Cited by
Topologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview
Gorji, S. A., Sahebi, H. G., Ektesabi, M., & Rad, A. B. (2019) · IEEE Access · doi:10.1109/access.2019.2937239 · Cited by 439
“As such, these converters are flexible and are widely used in electric vehicles (EVs) or hybrid electric vehicles (HEVs) [1], smart grids [2], uninterruptable power supplies (UPS) [3], aerospace applications [4] and renewable energy systems such as photovoltaic (PV) arrays, fuel cells (FCs), and wind turbines [5]–[7].”
BackgroundZografopoulos, I., Hatziargyriou, N. D., & Konstantinou, C. (2023) · IEEE Systems Journal · doi:10.1109/jsyst.2023.3305757 · Cited by 173
“For instance, the authors in [114] and [115], propose pulse-width-modulation and a high-frequency resonance scheme, respectively, that can mitigate the power quality degradation introduced by EVs and bidirectional gridtied converters (e.”
BackgroundTang, Y., Hu, W., Xiao, J. Q., Chen, Z., Huang, Q., Chen, Z., & Blaabjerg, F. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3007113 · Cited by 164
“As one of the most popular bidirectional topologies, the DAB DC-DC converter is widely used in electric vehicles (EVs), smart grids and renewable energy systems [2]-[4], etc.”
BackgroundXu, X., Mi, J., Fan, M., Yang, K., Wang, H., Liu, J., & Yan, H. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.262 · Cited by 97
Xu, X., Hui, K. S., Hui, K. N., Wang, H., & Liu, J. (2020) · Materials Horizons · doi:10.1039/c9mh01701a · Cited by 69
Bearing Electrical-Erosion Damage in Electrical Drive Systems: A Review
Xiao, Z., Hu, M., Chen, S., & Cao, K. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3301580 · Cited by 61
“…variable-frequency drive motors using a PWM inverter substantially reduce torque ripple and harmonic losses, improve the dynamic response performance of the system, generate less noise, and convert electromagnetic power more efficiently [45]; they are therefore widely used in EVs [54], [55].”
BackgroundTong, Y., Salhi, I., Wang, Q., Lu, G., & Wu, S. (2025) · Energies · doi:10.3390/en18092312 · Cited by 60
“In FCEV, as depicted in Figure 1a, the FC serves as the primary energy source, delivering the vehicle’s average power output to ensure a stable energy supply [19].”
Bi-directional DC/DC Converters Used in Interfacing ESSs for RESs and EVs: A Review
Jaga, O. P., Gupta, R., Jena, B., & GhatakChoudhuri, S. (2022) · IETE Technical Review · doi:10.1080/02564602.2022.2116362 · Cited by 42
Arandhakar, S., Nakka, J., Shankar, Y. R., Gaurav, G., Kishore, P. S. V., & Halder, S. (2022) · IEEE Access · doi:10.1109/access.2022.3223443 · Cited by 41
Power quality impact of electric vehicle charging station on utility grid
Sivaraman, P., Raj, J. S. S. S., & Kumar, P. A. (2021) · IEEE Madras Section Conference (MASCON) · doi:10.1109/mascon51689.2021.9563528 · Cited by 38
Bidirectional DC-DC Converter Fed BLDC Motor in Electric Vehicle
M, R. C. C., & Savier, J. S. (2021) · International Conference on Advances in Electrical, Computing, Communication and Sustainable Technologies (ICAECT) · doi:10.1109/icaect49130.2021.9392394 · Cited by 21
“Chemical batteries are prime energy storage in various industrial applications [3].”
BackgroundMonolithic β-Ga2O3 bidirectional dual-gate MOSFET
Sharma, P., Chakrabarty, P., Prajapati, P., Sen, S., & Lodha, S. (2024) · Applied Physics Letters · doi:10.1063/5.0232679 · Cited by 18
Isolated DC-DC Converter Fed DC Motor for Bidirectional Electric Vehicular Application
Ramteke, D. S., & Gaikwad, M. B. (2018) · International Conference on Smart Electric Drives and Power System (ICSEDPS) · doi:10.1109/icsedps.2018.8536061 · Cited by 16
Study of Bidirectional DC-DC Converter: Control Schemes and Switching Techniques
Waghmare, T., & Chaturvedi, P. (2020) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec49749.2020.9297713 · Cited by 15
“Such converters are extensively used in Smart Grids[1], renewable”
BackgroundRETRACTED ARTICLE: Bidirectional DC-DC converter circuits and smart control algorithms: a review
Viswanatha, V., Ramachandra, A. C., & Reddy, R. (2022) · Journal of Electrical Systems and Information Technology · doi:10.1186/s43067-022-00048-z · Cited by 14
RetractedBidirectional DC-DC Converter Circuits and Smart Control Algorithms: A ReviewPreprint
Viswanatha, V., Ramachandra, A. C., & Venkata Siva Reddy, R. (2022) · Research Square · doi:10.21203/rs.3.rs-1217632/v1 · Cited by 12
Deep Learning for Chromatic Optimization in Dual‐Color Mini‐LEDs for Aircraft Displays
Gao, F., Zhang, N., Bai, Z., Lü, Y., Chen, Z., & Guo, W. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202402087 · Cited by 11
Xu, X., Zhao, X., Hui, K. S., Dinh, D. A., & Hui, K. N. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202101107 · Cited by 10
Analysis and Control of Optimal Power Distribution for Multi-Objective Wireless Charging Systems
Zhang, Z., Tong, R., Liang, Z., Liu, C., & Wang, J. (2018) · Energies · doi:10.3390/en11071726 · Cited by 9
Self-citationPower Quality Issues on the Integration of RES-EV to Grid: A Review
Saritha, M., & Manitha, P. V. (2022) · International Conference on Innovations in Science and Technology for Sustainable Development (ICISTSD) · doi:10.1109/icistsd55159.2022.10010626 · Cited by 10
“Since DC power is supplied directly to the vehicle, use of high power converter is not required, thereby, reducing the size of the system[9,11].”
BackgroundDeepak, K., Mandal, R. K., & Verma, V. (2023) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v14.i4.pp2319-2327 · Cited by 8
“Hence the converter controller should work for reducing harmonics injected to the utility grid like an active filter [2].”
BackgroundTiwari, A. (2025) · Engineering Research Express · doi:10.1088/2631-8695/adadc4 · Cited by 5
Analysis of a novel soft switching bidirectional DC-DC converter for electric vehicle
Rao, P. G., Anandhakumar, R., & Rao, L. S. (2023) · Bulletin of Electrical Engineering and Informatics · doi:10.11591/eei.v12i5.4505 · Cited by 5
LC Impedance Source Bi-Directional Converter with Reduced Capacitor Voltages
Raveendhra, D., Dhaouadi, R., Rehman, H., & Mukhopadhyay, S. (2020) · Electronics · doi:10.3390/electronics9071062 · Cited by 5
Electromagnetic interference reduction in boost converter using logistic PWM
Gamoudi, R., Chariag, D. E., & Sbita, L. (2017) · International Conference on Green Energy Conversion Systems (GECS) · doi:10.1109/gecs.2017.8066229 · Cited by 4
Experimental Validation of a Non-Isolated DC-DC Bidirectional SEPIC
Castañeda-Rubalcaba, D. G., Sosa, J. M., Vázquez-Guzman, G., & Compeán-Jasso, V. H. (2023) · International Symposium on Electromobility (ISEM) · doi:10.1109/isem59023.2023.10334769 · Cited by 4
“They are also used in smart grids [6], aerospace applications [7], battery store systems (BESSs) [8], [9], photovoltaic (PV) systems and fuel cells (FC) systems [10], [11].”
BackgroundEvaluating a novel bidirectional soft-switching DC-DC converter for electric vehicles
Inampudi, P. K., Chandrasekar, P., & Muni, T. V. (2024) · International Journal of Applied Power Engineering (IJAPE) · doi:10.11591/ijape.v13.i4.pp825-834 · Cited by 3
“Zhang and Chau [16] state that in soft-switching situations, several non-isolated type converter topologies are applicable.”
BackgroundComparative Analysis on Bidirectional DC-DC Converter Topologies
Mohanty, P., Dash, R. N., Kundu, S., Choudhury, T. R., & Sahoo, S. (2023) · IEEE International Conference on Industrial Electronics: Developments & Applications (ICIDeA) · doi:10.1109/icidea59866.2023.10295261 · Cited by 3
“So it can be used in many applications of different fields such as electric vehicles(EVs) or hybrid electric vehicles (HEVs)[1], smart grids[4], uninterruptible power supplies (UPS)[3], aerospace applications, renewable energy systems such as photovoltaic (PV) arrays, fuel cells (FCs)[5]-[7], and…”
BackgroundAl–Mattarneh, H., Ismail, R. M. A., Abuaddous, M., Sharma, A., Krishna, T. M., Subburam, S., Janapati, K. C., Pediredla, R., Kumar, S. D., & Rao, P. S. V. R. (2024) · International Conference on Sustainable Power & Energy (ICSPE) · doi:10.1109/icspe62629.2024.10924342 · Cited by 2
Süli, F. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102391-4.00011-3 · Cited by 2
Transient Performance of Voltage Source Converter in V2G and G2V Electric Vehicles Application
Ahmed, T., Qaisar, S. M., Waqar, A., Hussain, T., & Iqbal, A. (2022) · International Conference on IT and Industrial Technologies (ICIT) · doi:10.1109/icit56493.2022.9989003 · Cited by 2
“To mitigate the electromagnetic interference in EVs, [26] has designed a grid-tied VSC based on pulse width modulation (PWM).”
BackgroundResearch on Electromagnetic Effect Generated by DC Converter on Human Body in Electric Vehicle
Xiao, J., Gao, C., Li, Z., Zhang, K., Jia, J., & Zhang, D. (2023) · IEEE Vehicular Technology Conference · doi:10.1109/vtc2023-spring57618.2023.10199698 · Cited by 2
“According to the DC converter working principle [3], the main circuit and corresponding control circuit are built in the”
BackgroundMethodCHBMLI Based PVDG System With Improved Power Quality Features And Battery Backup
Tiwari, A., & Panda, A. (2020) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec49749.2020.9297680 · Cited by 1
Bhatt, V., & Ranjan, A. (2025) · Lecture notes in electrical engineering · doi:10.1007/978-981-96-3758-4_22 · Cited by 1
Kamnarn, U., Rattanasila, A., Karnjanapiboon, C., Namin, A., Yodwong, B., Yachiangkam, S., Jantra, M., Takorabet, N., Bizon, N., & Thounthong, P. (2026) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.20250131 · Cited by 1
Wu, H.-J., Phukan, R., McGrew, T., Barbosa, P. M., & Chen, Y.-M. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3714731 · Cited by 1
High-Power-Density Converter for Renewable Energy Application
Lyu, X. (2017) · Cited by 1
Comparison of DC-DC Converter Topologies for Electric Vehicular Application
Gaikwad, M. B. (2019) · Helix · doi:10.29042/2019-5879-5883 · Cited by 1
“In general, the electric vehicle is energy competent, cleaner and environment friendly than the vehicle which is depend on fossil fuels [5]-[8].”
BackgroundGüzey, B., BOZKURT, H., & Teke, A. (2024) · Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi · doi:10.28948/ngumuh.1576914 · Cited by 1
Vyas, C., Ved, A. D., Trivedi, T., & Jadeja, R. B. (2020) · Smart innovation, systems and technologies · doi:10.1007/978-981-15-1616-0_27 · Cited by 1
An Advanced Power Flow Control in Small Scale DC Power Structure by Using Multilevel Converter
Vardhan, M. S. H., Maddilety, S., & Babu, P. S. (2022) · International journal of research in science & engineering · doi:10.55529/ijrise.26.1.8 · Cited by 1
Electromagnetic interference prediction technology of new energy motor drive system
Chen, C., & Hongqiang, Z. (2022) · Applied Mathematics and Nonlinear Sciences · doi:10.2478/amns.2021.2.00273 · Cited by 1
Dual Mode Control Of Grid Connected Solar Converters
Shah, W., Haq, I. U., & Rehman, U. U. (2019) · International Conference on Computing, Mathematics and Engineering Technologies (iCoMET) · doi:10.1109/icomet.2019.8673483
Hybrid Energy Storage System Based BLDC Motor Driven Electric Vehicle
M, R. C. C., & Savier, J. S. (2022) · International Conference on Innovations in Science and Technology for Sustainable Development (ICISTSD) · doi:10.1109/icistsd55159.2022.10010363
“The equation for electromagnetic torque is given by = ( + + )/ω (4)”
BackgroundPower Management Control Technique of Fuel Cell Operated Multiport bidirectional dc/dc converters
Rangari, S. C., Shelki, S. M., & Rana, C. (2023) · International Conference on Computer Applications in Electrical Engineering-Recent Advances (CERA) · doi:10.1109/cera59325.2023.10455501
Research on Electromagnetic Effect Generated by Power Supply System in Electric Vehicle
Li, Z., & Wang, Y. (2024) · International Conference on Microwave and Millimeter Wave Technology (ICMMT) · doi:10.1109/icmmt61774.2024.10671856
“According to the mechanism of DC/DC converter [3], DC/DC converter main circuit, drive circuit, input power supply, load and input/output cable, together constitute the DC/DC conversion system.”
BackgroundReview on topologies of non-isolated and isolated bidirectional DC-DC converters
Rangari, S. C., Shelki, S. M., Rana, C., & Gaigowal, S. R. (2024) · AIP conference proceedings · doi:10.1063/5.0241280
Topologies, Control Algorithms and Applications of Bidirectional DC-DC Converters
Krim, S. A., Krim, F., Afghoul, H., Bey, H., & Abdelmalek, F. (2024) · International Conference on Advances in Electrical and Communication Technologies (ICAECOT) · doi:10.1109/icaecot62402.2024.10994890
“[7] introduces a novel PWM algorithm aimed at eliminating interference from electromagnetics, to improve power quality specifically for Electric Vehicle (EV) applications.”
Simulation Modeling for Comparative Analysis of SPWM and SVPWM in Solar PV Inverters
Karvekar, S., & Karvekar, S. (2025) · International Conference on Computational Modelling, Simulation and Optimization (ICCMSO) · doi:10.1109/iccmso67468.2025.00051
“Furthermore, SVPWM usually produces lower Total Harmonic Distortion (THD) than SPWM, which enhances power quality and lessens electromagnetic interference [8]–[9].”
Analysis of EMI Issues in DC-Microgrids Due to Power Electronic Converters
Krishna, A. R. (2022) · Tuwhera (Auckland University of Technology)
Ngoune, J.-P., Owoundi, P. E., Ekemb, G., Cham, J. D., & Boum, A. T. (2025) · Indonesian Journal of Electrical Engineering and Informatics (IJEEI) · doi:10.52549/ijeei.v13i4.6895
Nasri, M., Krim, Y., Krim, S., & Mimouni, M. F. (2025) · International Conference on Sciences and Techniques of Automatic Control and Computer Engineering · doi:10.1109/sta66620.2025.11364743
“Traditional software-based solutions, relying on microcontrollers or digital signal processors (DSPs), operate sequentially, which limits sampling frequency, increases control loop delays, and reduces performance in real-time V2G applications [11].”
Assessment of Control Strategies and Switching Technologies in DC-DC Power Conversion
Raj, A., Dey, A., & Chakrabarty, S. (2025) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec66316.2025.11490723
“In such systems, DC-DC converters ensure efficient voltage boosting while maintaining a stable output despite fluctuations in input or load conditions [1] [2].”
Ghaly, A. S. E. (2026) · International Journal of Renewable Energy Research · doi:10.20508/ijrer.v16i2.15323.g9216
Subramaniyan, J., Balaji, C., & Queen, M. P. F. (2026) · Scientific Reports · doi:10.1038/s41598-026-62971-9
“Chemical batteries are widely used in industrial applications for energy storage 24 .”
Metadata
- Authors
- Zhang, Z., & Chau, K.-T.
- Affiliations
- Tianjin University (CN)
- University of Hong Kong (HK)
- Venue
- IEEE Transactions on Smart Grid
- Published
- 2017-11
- Volume
- 8
- Issue
- 6
- Pages
- 2803-2812
- ISSN
- 1949-3053 (ISSN-L)
- 1949-3061
- OpenAlex
- W2317555270
- Cited by
- 47
- References
- 26
- Citations by year
- 2026: 1 · 2025: 7 · 2024: 5 · 2023: 8 · 2022: 8 · 2021: 3 · 2020: 6 · 2019: 3 · 2018: 4 · 2017: 2
- FWCI
- 1.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Smart Grid (publishedVersion)
- Funders
- University of Hong Kong, Hong Kong (SPF 201309176048, SPF 201409176172)
- Basic Research Program of Science, Technology, and Innovation Commission of Shenzhen Municipality, Shenzhen, China (JCYJ20120831142942515)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Power Quality and Harmonics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- pulse width modulation, electromagnetic interference suppression, electric vehicles, vehicle-to-grid, conducted emissions, harmonic distribution, power quality, electromagnetic compatibility
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.