Lightweight Mutual Authentication for IoT and Its Applications
The DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
The Internet of Things (IoT) provides transparent and seamless incorporation of heterogeneous and different end systems. It has been widely used in many applications including smart cities such as public water system, power grid, water management, and vehicle traffic control system. In these smart city applications, a large number of IoT devices are deployed that can sense, communicate, compute, and potentially actuate. The uninterrupted and accurate functioning of these devices are critical to smart city applications as crucial decisions will be made based on the data received. One of the challenging tasks is to assure the authenticity of the devices so that we can rely on the decision making process with a very high confidence. One of the characteristics of IoT devices deployed in such applications is that they have limited battery power. A challenge is to design a secure mutual authentication protocol which is affordable to resource constrained devices. In this paper, we propose a lightweight mutual authentication protocol based on a novel public key encryption scheme for smart city applications. The proposed protocol takes a balance between the efficiency and communication cost without sacrificing the security. We evaluate the performance of our protocol in software and hardware environments. On the same security level, our protocol performance is significantly better than existing RSA and ECC based protocols. We also provide security analysis of the proposed encryption s…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Furthermore, the authors demonstrated that this scheme takes only around 125ms for mutual authentication on constrained devices.”
From Zero Trust Architecture (ZTA): A Comprehensive Survey (2022) · cites this paper as [116]
In the citing paper
“However, the evaluation has only been conducted on a Texas development kit.”
From Zero Trust Architecture (ZTA): A Comprehensive Survey (2022) · cites this paper as [116]
In the citing paper
“Similarly, authors in [116] proposed a publickey encryption approach and demonstrated the efficacy of using it for a mutual authentication mechanism in constrained devices.”
From Zero Trust Architecture (ZTA): A Comprehensive Survey (2022) · cites this paper as [116]
In the citing paper
“The proposed encryption scheme is not computationally expensive, so it may be suitable for constrained devices.”
From Zero Trust Architecture (ZTA): A Comprehensive Survey (2022) · cites this paper as [116]
In the citing paper
“This mutual authentication protocol is shown to have benefits over other methods such as AE, NTRU, and Elliptic Curve Cryptography (ECC).”
From Zero Trust Architecture (ZTA): A Comprehensive Survey (2022) · cites this paper as [116]
Citations
Cites
Internet of Things for Smart Cities
Zanella, A., Bui, N., Castellani, A., Vangelista, L., & Zorzi, M. (2014) · IEEE Internet of Things Journal · doi:10.1109/jiot.2014.2306328 · Cited by 6,292
On the security of public key protocols
Dolev, D., & Yao, A. (1983) · IEEE Transactions on Information Theory · doi:10.1109/tit.1983.1056650 · Cited by 5,833
Contiki - a lightweight and flexible operating system for tiny networked sensors
Dunkels, A., Gronvall, B., & Voigt, T. (2004) · 29th Annual IEEE International Conference on Local Computer Networks · doi:10.1109/lcn.2004.38 · Cited by 2,680
Using encryption for authentication in large networks of computers
Needham, R. M., & Schroeder, M. D. (1978) · Communications of the ACM · doi:10.1145/359657.359659 · Cited by 2,362
On lattices, learning with errors, random linear codes, and cryptography
Regev, O. (2005) · Proceedings of the thirty-seventh annual ACM symposium on Theory of computing · doi:10.1145/1060590.1060603 · Cited by 2,313
NTRU: A ring-based public key cryptosystem
Hoffstein, J., Pipher, J., & Silverman, J. H. (1998) · Lecture Notes in Computer Science · doi:10.1007/bfb0054868 · Cited by 1,947 · cited 3×
“NTRU [6] is a lattice based public key cryptosystem proposed in 1996.”
BackgroundInfluentialSmart Cities and the Future Internet: Towards Cooperation Frameworks for Open Innovation
Schaffers, H., Komninos, N., Pallot, M., Trousse, B., Nilsson, M., & Oliveira, A. (2011) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-20898-0_31 · Cited by 1,188
Artin, E. (1947) · The Annals of Mathematics · doi:10.2307/1969218 · Cited by 969
An attack on the Needham-Schroeder public-key authentication protocol
Lowe, G. (1995) · Information Processing Letters · doi:10.1016/0020-0190(95)00144-2 · Cited by 647 · cited 2×
“However, the protocol is insecure against the man-in-the-middle attack [35].”
BackgroundMethodMaking NTRU as Secure as Worst-Case Problems over Ideal Lattices
Stehlé, D., & Steinfeld, R. (2011) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-20465-4_4 · Cited by 444
Research works printed but not linked: 2
- anshel, 2006, Key agreement, the Algebraic Eraser $^{TM}$ , and lightweight crytography, Contemporary Math, 416, 1
- ben-zvi, 2015, A practical cryptography of the algebraic eraser, IACR Cryptology ePrint Archive, 2015, 1102
Cited by
A Review on the Use of Blockchain for the Internet of Things
Fernandez-Carames, T. M., & Fraga-Lamas, P. (2018) · IEEE Access · doi:10.1109/access.2018.2842685 · Cited by 1,078
Zero Trust Architecture (ZTA): A Comprehensive Survey
Syed, N. F., Shah, S. W., Shaghaghi, A., Anwar, A., Baig, Z., & Doss, R. (2022) · IEEE Access · doi:10.1109/access.2022.3174679 · Cited by 406
“Similarly, authors in [116] proposed a public-key encryption approach and demonstrated the efficacy of using it for a mutual authentication mechanism in constrained devices.”
BackgroundBhushan, B., Khamparia, A., Sagayam, K. M., Sharma, S. K., Ahad, M. A., & Debnath, N. C. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2020.102360 · Cited by 353
Fernandez-Carames, T. M., & Fraga-Lamas, P. (2019) · IEEE Access · doi:10.1109/access.2019.2908780 · Cited by 321
“Many devices that operate in Industry 4.0 factories (e.g., sensors, actuators, tools) have very limited computational resources (i.e., memory and processing power), so they struggle with modern secure public-key cryptography schemes [156].”
BackgroundInfluentialBlockchain Meets Edge Computing: A Distributed and Trusted Authentication System
Guo, S., Hu, X., Guo, S., Qiu, X., & Qi, F. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2938001 · Cited by 319
“, cooperative message authentication protocols [20], group-oriented-range-bound authenticated key agreements [21], lightweight mutual authentication protocols [22], etc.”
BackgroundAn overview of security and privacy in smart cities' IoT communications
Al‐Turjman, F., Zahmatkesh, H., & Shahroze, R. (2022) · Transactions on Emerging Telecommunications Technologies · doi:10.1002/ett.3677 · Cited by 313
“Moreover, a lightweight authentication protocol was developed in the work of Li et al 69 to secure smart cities' applications by using a public key encryption strategy.”
MethodSecurity and Privacy in Smart Cities: Challenges and Opportunities
Cui, L., Xie, G., Qu, Y., Gao, L., & Yang, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2853985 · Cited by 306
“Recently, a novel lightweight authentication protocol was proposed by Li et al. [43] by adopting a public key encryption scheme and aiming to secure smart city applications.”
BackgroundSecuring the Internet of Things in the Age of Machine Learning and Software-Defined Networking
Restuccia, F., D'Oro, S., & Melodia, T. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2018.2846040 · Cited by 286
Li, S., Zhang, T., Yu, B., & He, K. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.3028872 · Cited by 135
“In general, the protocols based on traditional cryptography [36]–[38], [44] cannot resist the physical attacks (SF7) and the leakage of secret parameters stored in the devices would make these protocols out of action; the protocols [16]–[19] are resilient against physical attacks and can provide…”
BackgroundPrivacy-preserving fusion of IoT and big data for e-health
Yang, Y., Zheng, X., Guo, W., Liu, X., & Chang, V. (2018) · Future Generation Computer Systems · doi:10.1016/j.future.2018.01.003 · Cited by 123
Toward Secure and Provable Authentication for Internet of Things: Realizing Industry 4.0
Garg, S., Kaur, K., Kaddoum, G., & Choo, K. R. (2019) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2942271 · Cited by 113
“For example, Li et al. [16] advocated the potential of using public-key encryption to design lightweight and secure authentication schemes for smart cities.”
BackgroundTahir, M., Sardaraz, M., Muhammad, S., & Khan, M. S. (2020) · Sustainability · doi:10.3390/su12176960 · Cited by 132
“Although, AE claims that it had achieved high performance on lightweight devices [58,59].”
BackgroundSecurity in product lifecycle of IoT devices: A survey
Yousefnezhad, N., Malhi, A. K., & Främling, K. (2020) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2020.102779 · Cited by 132
Blockchain-Based Secure and Lightweight Authentication for Internet of Things
Yang, X., Yang, X., Yi, X., Khalil, I., Zhou, X., He, D., Huang, X., & Nepal, . (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3098007 · Cited by 109
A Secured Multi-Stages Authentication Protocol for IoT Devices
Alhusenat, A. Y., Owida, H. A., Rababah, H. A., Al-Nabulsi, J., & Abuowaida, S. F. A. (2023) · Mathematical Modelling and Engineering Problems · doi:10.18280/mmep.100429 · Cited by 88
Jan, M. A., Jinjin, C., Gao, X., Khan, F., Mastorakis, S., Usman, M., Alazab, M., & Watters, P. (2020) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2020.102918 · Cited by 103
“CLAP is a project of Commonwealth Scientific and Industrial Research Organisation (CSIRO), Australia for exchanging scalar data between low-powered smart connected devices [159].”
BackgroundVivekanandan, M., Sastry, V. N., & Reddy, U. S. (2020) · Peer-to-Peer Networking and Applications · doi:10.1007/s12083-020-00963-w · Cited by 85
“Li et al. [22] designed IoT mutual authentication protocol based on public key encryption and decryption, but these protocol takes high computation and communication overhead (Wazid et al. [38]).”
BackgroundComparative Performance Analysis of Lightweight Cryptography Algorithms for IoT Sensor Nodes
Fotovvat, A., Rahman, G. M. E., Vedaei, S. S., & Wahid, K. A. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3044526 · Cited by 89
“In [18], a mutual authentication algo-rithm for constrained devices is proposed that is based on a new public key encryption method.”
MethodWazid, M., Das, A. K., Shetty, S. S., Rodrigues, J. J. P. C., & Park, Y. (2019) · Sensors · doi:10.3390/s19245539 · Cited by 86
“Li et al. [30] presented a device-to-device authentication protocol in the IoT environment.”
BackgroundA Review of Security in Internet of Things
Harbi, Y., Aliouat, Z., Harous, S., Bentaleb, A., & Refoufi, A. (2019) · Wireless Personal Communications · doi:10.1007/s11277-019-06405-y · Cited by 82
An analysis and evaluation of lightweight hash functions for blockchain-based IoT devices
Abed, S., Jaffal, R., Mohd, B. J., & Alshayeji, M. H. (2021) · Cluster Computing · doi:10.1007/s10586-021-03324-1 · Cited by 90
An efficient lightweight authentication scheme for human‐centered industrial Internet of Things
Singh, J., Gimekar, A. M., & Venkatesan, S. (2019) · International Journal of Communication Systems · doi:10.1002/dac.4189 · Cited by 73
Light-weight hashing method for user authentication in Internet-of-Things
Rao, V. S., & Prema, K. (2019) · Ad hoc networks · doi:10.1016/j.adhoc.2019.03.003 · Cited by 55
A review on lightweight cryptography for Internet-of-Things based applications
Rao, V., & Prema, K. V. (2020) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-020-02672-x · Cited by 79
“Hence to balance the performance between efficiency and communication cost, Li et al. (2017) have designed a lightweight mutual authentication protocol based on public-key encryption scheme for smart city applications.”
BackgroundHernández-Rojas, D., Fernández-Caramés, T., Fraga-Lamas, P., & Escudero, C. (2017) · Sensors · doi:10.3390/s18010057 · Cited by 60
“Some authors have already addressed some of such challenges [42].”
BackgroundFraga‐Lamas, P., Fernández‐Caramés, T. M., da Cruz, A. M. R., & Lopes, S. I. (2024) · IEEE Access · doi:10.1109/access.2024.3435374 · Cited by 80
“IIoT nodes like sensors, actuators or certain industrial machinery are usually constrained in terms of computational power, memory and energy consumption, so it is difficult to implement on them high-security cryptosystems like the public-key algorithms commonly used by blockchain [335].”
SDN-Based Handover Authentication Scheme for Mobile Edge Computing in Cyber-Physical Systems
Wang, C., Zhang, Y., Chen, X., Liang, K., & Wang, Z. (2019) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2922979 · Cited by 62
“We compare SHAS scheme with LMA scheme [11] and CHS scheme [16] in terms of number of the cryptography operations and the handover authentication delay to show that the SHAS scheme cannot only offer security features but also significantly decrease computational costs and delay.”
BackgroundMethodA multi‐attack resilient lightweight IoT authentication scheme
Adeel, A., Ali, M., Khan, A. N., Khalid, T., Rehman, F. U., Jararweh, Y., & Shuja, J. (2019) · Transactions on Emerging Telecommunications Technologies · doi:10.1002/ett.3676 · Cited by 61
A Novel Security Scheme Based on Instant Encrypted Transmission for Internet of Things
Wang, C., Shen, J., Liu, Q., Ren, Y., & Li, T. (2018) · Security and Communication Networks · doi:10.1155/2018/3680851 · Cited by 56
“[29] present a novel key encryption scheme to establish a lightweight mutual authentication protocol for smart city applications.”
BackgroundNovel Method for DNA-Based Elliptic Curve Cryptography for IoT Devices
Tiwari, H. D., & Kim, J. H. (2018) · ETRI Journal · doi:10.4218/etrij.2017-0220 · Cited by 62
Al‐Saggaf, A. A., Sheltami, T., Alkhzaimi, H. A., & Ahmed, G. (2022) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-022-07235-0 · Cited by 64
“Nan et al. [24] proposed a lattice-based public-key encryption based on Needham and Schroeder scheme [25] and then used to construct a lightweight authentication protocol for smart city environment.”
MethodTerminal independent security token derivation scheme for ultra-dense IoT networks
Nyangaresi, V. O. (2022) · Array · doi:10.1016/j.array.2022.100210 · Cited by 53
Ahmed, A. A., & Ali, W. (2019) · Sensors · doi:10.3390/s19173663 · Cited by 48
“[21] proposed a lightweight mutual authentication protocol based on a novel public key encryption scheme for smart city applications.”
BackgroundA privacy-preserving code-based authentication protocol for Internet of Things
Chikouche, N., Cayrel, P.-L., Mboup, E. H. M., & Boidje, B. O. (2019) · The Journal of Supercomputing · doi:10.1007/s11227-019-03003-4 · Cited by 45
“There are two categories of authentication protocols to secure M2M depending on the type of communicating machines: the machines are IoT devices (D2D), such as [31, 44].”
Fang, H., Wang, X., Zhao, N., & Al‐Dhahir, N. (2021) · IEEE Transactions on Communications · doi:10.1109/tcomm.2021.3065980 · Cited by 43
“The authors of [10] developed a lightweight mutual authentication protocol based on the public key encryption for smart city applications, which strikes a balance between the efficiency and communication cost without sacrificing the security.”
BackgroundA comprehensive survey on secure software‐defined network for the Internet of Things
Mohamed, M. B., Alofe, O. M., Azad, M. A., Lallie, H. S., Fatema, K., & Sharif, T. (2021) · Transactions on Emerging Telecommunications Technologies · doi:10.1002/ett.4391 · Cited by 47
“…Authorization, and Accounting: Authentication involve the process of verifying users within the environment, authorization is the privileged access granted to users to specified assets within the environment while accounting serves to monitor and audit the environment [69, 70, 71, 72].”
BackgroundImproving communication precision of IoT through behavior-based learning in smart city environment
Li, D., Deng, L., Liu, W., & Su, Q. (2020) · Future Generation Computer Systems · doi:10.1016/j.future.2020.02.053 · Cited by 42
Tian, C., Ma, J., Li, T., Zhang, J., Ma, C., & Xi, N. (2024) · IEEE Transactions on Information Forensics and Security · doi:10.1109/tifs.2024.3379861 · Cited by 48
Mustafa, R., Sarkar, N. I., Mohaghegh, M., & Pervez, S. (2024) · Sensors · doi:10.3390/s24227209 · Cited by 67
“The IoT makes it easier to integrate disparate systems, which is essential for smart city applications like traffic and water management [58].”
Modern Authentication Schemes in Smartphones and IoT Devices: An Empirical Survey
Ahvanooey, M. T., Zhu, M. X., Li, Q., Mazurczyk, W., Choo, K. R., Gupta, B. B., & Conti, M. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3138073 · Cited by 41
“Also, the usage of an insecure login interface (e.g., mobile, cloud, Web, and back-end API) outside the device is another vulnerability that leads to compromise it or its related elements [95]– [98].”
BackgroundLightweight security protocols for the Internet of Things
Wu, X.-W., Yang, E.-H., & Wang, J. (2017) · 2017 IEEE 28th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC) · doi:10.1109/pimrc.2017.8292779 · Cited by 32
“The Internet of Things (IoT) security has attracted a lot of attention over the recent years [1-11], due to the huge potential of IoT technologies for economic and social impact [12, 13].”
BackgroundSignature Gateway: Offloading Signature Generation to IoT Gateway Accelerated by GPU
Chang, C., Lee, W., Liu, Y., Goi, B., & Phan, R. C. ‐. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2018.2881425 · Cited by 32
“the message using digital signature [4] every time it transmits the collected data to a cloud server or a nearby IoT gateway device.”
MethodA lightweight authentication protocol for D2D-enabled IoT systems with privacy
Pham, C. D. M., & Dang, T. K. (2021) · Pervasive and Mobile Computing · doi:10.1016/j.pmcj.2021.101399 · Cited by 34
Marino, F., Moiso, C., & Petracca, M. (2018) · Computer Networks · doi:10.1016/j.comnet.2018.11.011 · Cited by 34
IoT: Application Protocols and Security
Johnson, D., & Ketel, M. (2019) · International Journal of Computer Network and Information Security · doi:10.5815/ijcnis.2019.04.01 · Cited by 31
“In paper [11], the authors proposed and analyzed a lightweight mutual authentication protocol based on a novel public key encryption scheme that is suitable for IoT devices.”
Security and Information Assurance for IoT-Based Big Data
Abiodun, M. K., Awotunde, J. B., Ogundokun, R. O., Adeniyi, A. E., & Arowolo, M. O. (2021) · Studies in computational intelligence · doi:10.1007/978-3-030-72236-4_8 · Cited by 33
A novel trusted hardware-based scalable security framework for IoT edge devices
Khan, M., Hatami, M., Zhao, W., & Chen, Y. (2024) · Discover Internet of Things · doi:10.1007/s43926-024-00056-7 · Cited by 35
“A lot of efforts have been reported to secure the IoT devices and networks, including access control [4, 5], data authentication [6], privacy preservation [7, 8], and security solutions against hardware-level attacks, i.e., side-channel attacks (SCA) [9, 10].”
Velani, A. F., Narwane, V. S., & Gardas, B. B. (2022) · Journal of Modelling in Management · doi:10.1108/jm2-04-2021-0090 · Cited by 26
A Review on the Use of Block chain for the Internet of Things
Singh, G. S., & Singh, S. (2019) · International Journal of Computer Sciences and Engineering · doi:10.26438/ijcse/v7i7.332358 · Cited by 23
An RSA Based Authentication System for Smart IoT Environment
Mumtaz, M., Akram, J., & Luo, P. (2019) · IEEE International Conference on High Performance Computing and Communications; IEEE International Conference on Smart City; IEEE International Conference on Data Science and Systems (HPCC/SmartCity/DSS) · doi:10.1109/hpcc/smartcity/dss.2019.00112 · Cited by 24
“Among number of security services, authentication is one of the fundamental prerequisite service of all [24]–[27].”
BackgroundAn Efficient Implementation of NTRU Encryption in Post-Quantum Internet of Things
Agus, Y. M., Murti, M. A., Kurniawan, F., Cahyani, N. D. W., & Satrya, G. B. (2020) · doi:10.1109/ict49546.2020.9239560 · Cited by 22
Comparative Study of Lightweight Hashing Functions for Resource Constrained Devices of IoT
Rao, V. S., & Prema, K. (2019) · 2019 4th International Conference on Computational Systems and Information Technology for Sustainable Solution (CSITSS) · doi:10.1109/csitss47250.2019.9031038 · Cited by 14
“Similarly, Richa et al., [17] have made a study on recent cryptographic hash functions.”
BackgroundMethodInfluentialSMAP Fog/Edge: A Secure Mutual Authentication Protocol for Fog/Edge
Pardeshi, M. S., & Yuan, S. (2019) · IEEE Access · doi:10.1109/access.2019.2930814 · Cited by 24
“by comparing RSA [29], [31], ECC [29], original LMAP [28] and optimal LMAP [28] all of the security level of 80 bit with SMAP.”
BackgroundMethodInfluentialPardeshi, M. S., Sheu, R., & Yuan, S. (2022) · Sensors · doi:10.3390/s22020607 · Cited by 30
“Note: All the cryptographic operations are performed using the Lightweight Encryption System (LES) [40].”
MethodInfluentialChawla, D., & Mehra, P. S. (2023) · Internet of Things · doi:10.1016/j.iot.2023.100949 · Cited by 21
Modeling of Sewerage System Using Internet of Things for Smart City
Latif, S., Afzaal, H., & Zafar, N. A. (2017) · International Conference on Frontiers of Information Technology (FIT) · doi:10.1109/fit.2017.00016 · Cited by 21
Mutual Authentication for IoT in the Context of Fog Computing
Loffi, L., Westphall, C. M., Grüdtner, L. D., & Westphall, C. B. (2019) · International Conference on Communication Systems & Networks (COMSNETS) · doi:10.1109/comsnets.2019.8711402 · Cited by 22
“In [8], protocol’s performance and efficiency are considered the main characteristics, considering the use of low resources applications, the authors developed a public key cryptography algorithm.”
BackgroundInfluentialA modified lightweight DNA ‐based cryptography method for internet of things devices
Al-Shargabi, B., & Assi, A. D. (2023) · Expert Systems · doi:10.1111/exsy.13270 · Cited by 17
ECC-Based Anonymous and Multi-factor Authentication Scheme for IoT Environment
Dargaoui, S., Azrour, M., Allaoui, A. E., Guezzaz, A., Alabdulatif, A., & Ahmad, S. (2025) · International Journal of Online and Biomedical Engineering (iJOE) · doi:10.3991/ijoe.v21i01.51633 · Cited by 16
Saurabh, Sharma, C., Khan, S., Mahajan, S., AlSagri, H. S., Almjally, A., Alabduallah, B. I., & Ansari, A. A. (2023) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-232388 · Cited by 22
“In [16] both fingerprint and biometrics was used to enhance the security of the proposed approach with a perceptual hash function.”
InfluentialModeling of Sewerage System Linking UML, Automata and TLA+
Latif, S., Rehman, A., & Zafar, N. A. (2018) · International Conference on Computing, Electronic and Electrical Engineering (ICE Cube) · doi:10.1109/icecube.2018.8610971 · Cited by 15
DTA-PUF: Dynamic Timing-aware Physical Unclonable Function for Resource-constrained Devices
Tsiokanos, I., Miskelly, J., Gu, C., O'Neill, M. P., & Karakonstantis, G. (2021) · ACM Journal on Emerging Technologies in Computing Systems · doi:10.1145/3434281 · Cited by 15
“As such, research has been conducted into new lightweight and low overhead techniques for addressing hardware weaknesses [41, 49, 70] as early as possible at design cycle [12, 22].”
BackgroundHeterogeneous online/offline signcryption for secure communication in Internet of Things
Jin, C., Zhu, H., Qin, W., Chen, Z., Jin, Y., & Shan, J. (2022) · Journal of Systems Architecture · doi:10.1016/j.sysarc.2022.102522 · Cited by 15
Novel Light Weight Hardware Authentication Protocol for Resource Constrained IoT Based Devices
Vijaykumar, V. R., Sekar, S. R., Jothin, R., Diniesh, V. C., Elango, S., & Ramakrishnan, S. (2024) · IEEE Journal of Radio Frequency Identification · doi:10.1109/jrfid.2024.3359705 · Cited by 14
“7. designed for low power IoT devices [31], [32].”
BackgroundChawla, D., Jain, K., Mehra, P. S., Das, A. K., & Bera, B. (2025) · Internet of Things · doi:10.1016/j.iot.2025.101610 · Cited by 18
Bettoumi, B., & Bouallègue, R. (2021) · Sensors · doi:10.3390/s21217348 · Cited by 14
“The authors of [24] propose a new mutual authentication protocol, based on public-key encryption, for IoT.”
Sani, A. S., Bertino, E., Yuan, D., Meng, K., & Dong, Z. Y. (2022) · Computers & Security · doi:10.1016/j.cose.2022.102610 · Cited by 13
Oracle Based Privacy-Preserving Cross-Domain Authentication Scheme
Su, Y., Wang, Y., Li, J., Su, Z., Pedrycz, W., & Hu, Q. (2024) · IEEE Transactions on Sustainable Computing · doi:10.1109/tsusc.2024.3350343 · Cited by 13
CAAVI-RICS model for observing the security of distributed IoT and edge computing systems
Pešić, S., Ivanović, M. D., Radovanović, M., & Bădică, C. (2020) · Simulation Modelling Practice and Theory · doi:10.1016/j.simpat.2020.102125 · Cited by 14
“Similarly, Li et al. propose a lightweight MFA protocol based on public-key encryption [30].”
BackgroundAnalysis of Smart Cities Security: Challenges and Advancements
Houichi, M., Jaïdi, F., & Bouhoula, A. (2022) · International Conference on Security of Information and Networks (SIN) · doi:10.1109/sin56466.2022.9970494 · Cited by 22
“The authors, in [17], created a simple scenario for Internet of things that could defend users from DDOS attacks.”
BackgroundAn Efficient Authentication Scheme for Secure Communication between Industrial IoT Devices
Baruah, B., & Dhal, S. (2020) · International Conference on Computing, Communication and Networking Technologies (ICCCNT) · doi:10.1109/icccnt49239.2020.9225644 · Cited by 15
“In [17], Li et al.”
BackgroundInfluentialKhan, S., Alzahrani, A. I., Alfarraj, O., Alalwan, N., & Al-Bayatti, A. H. (2019) · IEEE Access · doi:10.1109/access.2019.2955604 · Cited by 12
“Attackers can manipulate the information to misguide the decision taking authority and damage the system operation [12], or can take over a server or connect fake servers to attract network traffic.”
BackgroundIntegrated Communication and Navigation Based on LEO Satellite Networks: A Survey
Wang, M., Nardin, A., Ma, R., Wang, R., Dovis, F., Garello, R., & Liu, G. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3601137 · Cited by 21
“A key advantage of the ICAN framework for navigation is its implementation of robust authentication protocols, commonly utilized in communication networks [159], such as mutual authentication [160].”
Abnormal behavior detection mechanism using deep learning for zero-trust security infrastructure
Kim, H., & Song, E.-H. (2024) · International Journal of Information Technology · doi:10.1007/s41870-024-02110-7 · Cited by 16
“However, it is limited to the Texas Development Kit [16].”
Ali, F. K., & Mathew, S. (2022) · PeerJ Computer Science · doi:10.7717/peerj-cs.989 · Cited by 13
“An authentication scheme based on two factors is proposed in Li, Liu & Nepal (2017) , in which mutual authentication between the device and a server is discussed in detail.”
A PUF-based Mutual Authentication Protocol for Internet of Things
Satamraju, K. P., & Malarkodi, B. (2020) · International Conference on Computing, Communication and Security (ICCCS) · doi:10.1109/icccs49678.2020.9276868 · Cited by 14
“Another powerful mutual authentication protocol that provides trade-off between efficiency and communication cost without degrading the security features has been proposed in [15].”
BackgroundSmart Cities: A Worldwide Journey into Intelligent Urbanism and State-of-the-Art Technologies
Sharma, H., & Kanwal, N. (2023) · Scientific and Technical Information Processing · doi:10.3103/s0147688223040081 · Cited by 14
“Similarly, a unique light-weight authentication protocol has been presented by [189] has for the security of smart city applications that uses a public key encryption method.”
Kuang, Y., Wu, Q., Chen, R., & Liu, X. (2025) · Computer Standards & Interfaces · doi:10.1016/j.csi.2025.103981 · Cited by 16
Miyanaji, R. S., Jabbehdari, S., & Modiri, N. (2022) · Transactions on Emerging Telecommunications Technologies · doi:10.1002/ett.4479 · Cited by 11
“Therefore, in the high-level priority group, the estimation of computation time of authentication is as Formula (1).”
MethodInfluentialStrategies for Mitigating Security Concerns in IoT-Enabled Smart Cities
Ravikumar, R., Singhal, S., Betgeri, S. S., & Singh, S. K. (2024) · Advances in computational intelligence and robotics book series · doi:10.4018/979-8-3693-2373-1.ch012 · Cited by 13
Novel Secure Group Data Exchange Protocol in Smart Home with Physical Layer Network Coding
Liu, Q., Zhang, W.-J., Ding, S., Li, H., & Wang, Y. (2020) · Italian National Conference on Sensors · doi:10.3390/s20041138 · Cited by 6
“For the first problem, a lot of lightweight encryption [6–9] and lightweight authentication algorithms [10,11] have been proposed, but these algorithms are all based on a shared key which falls into the second problem.”
BackgroundChawla, D., & Mehra, P. S. (2024) · Transactions on Emerging Telecommunications Technologies · doi:10.1002/ett.4957 · Cited by 12
Jain, U., Tripathi, A., Kumar, S., & Kumar, G. (2023) · Microsystem Technologies · doi:10.1007/s00542-023-05566-y · Cited by 8
“In Li et al. (2017b), authors have proposed a robust and energy effi-cient authentication protocol which uses symmetric encryption, elliptic curve cryptography (ECC), hash function and XOR operation.”
An improved authentication scheme for Internet of things
Xie, Z., & Jiang, L. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/715/1/012031 · Cited by 9
“In these IoT applications, the things can collect sensitive information from the environment, which is then used to analyze and make decisions [6].”
BackgroundThreats and vulnerabilities of wireless sensor networks in smart cities
Obaidat, M. A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-817784-6.00024-2 · Cited by 10
LTAMA-Algorithm: Light and Trust Anonymous Mutual Authentication Algorithm for IoT
Jebri, S., Abid, M., & Bouallègue, A. (2018) · IEEE Vehicular Technology Conference · doi:10.1109/vtcspring.2018.8417686 · Cited by 8
“In [4], a mutual authentication protocol is proposed.”
BackgroundBaykara, C. A., Şafak, I., & Kalkan, K. (2025) · Computer Networks · doi:10.1016/j.comnet.2025.111601 · Cited by 7
Tandel, P., & Nasriwala, J. (2024) · Service Oriented Computing and Applications · doi:10.1007/s11761-024-00414-x · Cited by 8
“The Winternitz One-Time Signature Scheme (WOTS+), a variant of the Winternitz One-Time Signature scheme, serves as a building block in various cryptographic protocols for post-quantum safe signatures [37].”
An Improved DNA based Encryption Algorithm for Internet of Things Devices
Al-Shargabi, B., & Assi, A. D. (2022) · International Conference on Engineering & MIS (ICEMIS) · doi:10.1109/icemis56295.2022.9914290 · Cited by 6
“Furthermore, some authentication methods have taken into account IoT constraint characteristics by implementing a lightweight authentication protocoll in conjunction with a public key encryption infrastructure[15].”
MethodChallenges and Opportunities in Secure Smart Cities for Enhancing the Security and Privacy
Saini, S., Chauhan, A., Thakur, G., & Sapra, L. (2023) · Springer eBooks · doi:10.1007/978-3-031-22922-0_1 · Cited by 8
Kharghani, E., Aliakbari, S., Bidad, J., & Modarres, A. M. A. (2023) · doi:10.1109/icee59167.2023.10334808 · Cited by 6
“A considerable number of the proposed schemes have used asymmetric cryptography systems [2]–[8].”
BackgroundKumar, A., Jain, U., Hussain, M., Rahmani, M. K. I., & Banga, A. S. (2024) · IEEE Access · doi:10.1109/access.2024.3435688 · Cited by 5
“Li et al. [22] designed a mutual authentication protocol for IoT devices considering the resource constrain nature of the devices.”
BackgroundDaniel, D. J. J. D., & Jagadeesh, S. (2025) · Security and Privacy · doi:10.1002/spy2.70004 · Cited by 5
“The Lightweight Mutual Authentication Mechanism (LWMAM) was established by Li et al. [10].”
A Lightweight Blockchain Framework for secure transaction in resource constrained IoT devices
Raj, R., & Ghosh, M. (2023) · International Conference on Recent Advances in Information Technology · doi:10.1109/rait57693.2023.10126898 · Cited by 7
“) that establish new requirements, such as lightweight security schemes, lightweight algorithms, and low power consumption [9].”
BackgroundHaghighi, M. S., Nader, O., & Jolfaei, A. (2020) · IEEE Internet of Things Magazine · doi:10.1109/iotm.0001.2000014 · Cited by 6
“For example, some recent research works in the IoT security field focused on lightweight mutual authentication to save integrity of sensors’ data in smart cities [7].”
BackgroundCASK: Conditional Authentication and Session Key Establishment In Fog-assisted Social IoT Network
Amor, A. B., Abid, M., & Meddeb, A. (2019) · International Wireless Communications and Mobile Computing Conference (IWCMC) · doi:10.1109/iwcmc.2019.8766785 · Cited by 5
“Therefore, without the knowledge of private values u1, u2, an attacker cannot guess the authenticated keys successfully due to the ECDLP property.”
BackgroundInfluentialA Remote Device Authentication Scheme for Secure Communication in Cloud Based IOT
Panda, S. S., Jena, D., & Mohanta, B. K. (2019) · International Conference on Innovations in Electronics, Signal Processing and Communication (IESC) · doi:10.1109/iespc.2019.8902450 · Cited by 5
“[23] proposed a mutual authentication scheme for smart city applications which is based on a new public key encryption technique which makes their scheme very complex to implement in real life.”
BackgroundSecured Routing in VANETs Using Lightweight Authentication and Key Agreement Protocol
Sandou, D. K., Jothy, N., & Jayanthi, K. (2018) · International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET) · doi:10.1109/wispnet.2018.8538678 · Cited by 5
Light Weight Secure Authentication for Accessing IoT Application Resources
Abbas, Z., Sajjad, S. M., & Hadi, H. J. (2019) · International Multi-Topic Conference · doi:10.1109/inmic48123.2019.9022792 · Cited by 5
“In 2015 Nan Li et al [14], propose a lightweight mutual authentication protocol based on a novel public-key encryption scheme for smart city applications but the proposed solution is software-based with high computational power.”
BackgroundRequirements framework for IoT device authentication using behavioral fingerprinting
Höfener, O., & Wang, Q. (2025) · Computers & Security · doi:10.1016/j.cose.2025.104459 · Cited by 5
Metadata
- Authors
- Li, N., Liu, D., & Nepal, S.
- Affiliations
- Data61 (AU)
- Venue
- IEEE Transactions on Sustainable Computing
- Published
- 2017-10-01
- Volume
- 2
- Issue
- 4
- Pages
- 359-370
- ISSN
- 2377-3782 (ISSN-L)
- 2377-3790
- OpenAlex
- W2706591630
- Semantic Scholar
- d02d740d8ad1d188f89cd72bc5a5b3c4c6ca4cb3
- Cited by
- 166
- References
- 36
- Citations by year
- 2026: 3 · 2025: 17 · 2024: 17 · 2023: 15 · 2022: 25 · 2021: 24 · 2020: 21 · 2019: 27 · 2018: 14 · 2017: 3
- FWCI
- 11.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Sustainable Computing (publishedVersion)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Advanced Authentication Protocols Security
- Physical Sciences › Computer Science › Computer Networks and Communications › Cryptography and Data Security
- Physical Sciences › Computer Science › Computer Networks and Communications › IoT and Edge/Fog Computing
- Keywords
- mutual authentication, Internet of Things, smart cities, lightweight authentication protocol, resource-constrained devices, public-key encryption, device authentication, battery-constrained devices, communication overhead, security analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.