The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Design of Bidirectional DC–DC Resonant Converter for Vehicle-to-Grid (V2G) Applications
Abstract
In this paper, a detailed design procedure is presented for a bidirectional CLLLC-type resonant converter for a battery charging application. This converter is similar to an LLC-type resonant converter with an extra inductor and capacitor in the secondary side. Soft-switching can be ensured in all switches without additional snubber or clamp circuitry. Because of soft-switching in all switches, very high-frequency operation is possible; thus, the size of the magnetics and the filter capacitors can be made small. To reduce the size and cost of the converter, a CLLC-type resonant network is derived from the original CLLLC-type resonant network. First, in this paper, an equivalent model for the bidirectional converter is derived for the steady-state analysis. Then, the design methodology is presented for the CLLLC-type resonant converter. Design of this converter includes determining the transformer turns ratio, design of the magnetizing inductance based on zero-voltage switching condition, design of the resonant inductances and capacitances. Then, the CLLCtype resonant network is derived from the CLLLC-type resonant network. To validate the design procedure, a 3.5-kW converter was designed following the guidelines in the proposed methodology. A prototype was built and tested in the laboratory. Experimental results verified the design procedure presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 1×
“R ECENTLY, electric vehicles (EVs) and plug-in hybrid EVs (PHEVs) have gained popularity because of their advantages, such as more environmentally friendly, less noisy, and more efficient [1].”
BackgroundJung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213346 · Cited by 621
Chen, W., Rong, P., & Lu, Z. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037099 · Cited by 464
High-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411
Self-citationSingle-Phase On-Board Bidirectional PEV Charger for V2G Reactive Power Operation
Kisacikoglu, M. C., Kesler, M., & Tolbert, L. M. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2360685 · Cited by 381
A Bidirectional LLC Resonant Converter With Automatic Forward and Backward Mode Transition
Jiang, T., Zhang, J., Wu, X., Sheng, K., & Wang, Y. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2307329 · Cited by 264
Modeling and Control of Series–Series Compensated Inductive Power Transfer System
Zahid, Z. U., Dalala, Z. M., Zheng, C., Chen, R., Faraci, W. E., Lai, J.-S. J., Lisi, G., & Anderson, D. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2327959 · Cited by 238
Self-citationReview of high power isolated bi-directional DC-DC converters for PHEV/EV DC charging infrastructure
Du, Y., Lukic, S., Jacobson, B., & Huang, A. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063818 · Cited by 218
High-Efficiency Contactless Power Transfer System for Electric Vehicle Battery Charging Application
Zheng, C., Lai, J., Chen, R., Faraci, E., Zahid, Z. U., Gu, B., Zhang, L., Lisi, G., & Anderson, D. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2339279 · Cited by 184
Self-citationStudy of a non-isolated bidirectional DC–DC converter
Lin, C. ‐., Yang, L. ‐., & Wu, G. W. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0338 · Cited by 180
A ZVZCS PWM FB DC/DC converter using a modified energy-recovery snubber
Kim, E.-S., & Kim, Y.-H. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.803237 · Cited by 108
Synergistic control of plug-in vehicle charging and wind power scheduling
Li, C.-T., Ahn, C., Peng, H., & Sun, J. (2012) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2012.2211900 · Cited by 105
Bidirectional DC–DC soft‐switching converter for stand‐alone photovoltaic power generation systems
Chao, K., & Huang, C. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0335 · Cited by 97
Park, J., & Choi, S. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2281826 · Cited by 85
Narasimharaju, B. L., Dubey, S. P., & Singh, S. P. (2012) · IET Power Electronics · doi:10.1049/iet-pel.2011.0141 · Cited by 81
A Step-Up Bidirectional Series Resonant DC/DC Converter Using a Continuous Current Mode
Ibáñez, F. M., Echeverría, J. M., Vadillo, J., & Fontán, L. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2318202 · Cited by 57
Design of high-efficiency bidirectional DC-DC converter and high-precision efficiency measurement
Yu, W., Qian, H., & Lai, J. (2008) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2008.4758036 · Cited by 39
Self-citationHigh efficiency contactless power transfer system for electric vehicle battery charging
Zheng, C., Chen, R., Faraci, E., Zahid, Z. U., Senesky, M. K., Anderson, D., Lai, J., Yu, W., & Lin, C.-Y. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647126 · Cited by 29
Self-citationDesign and control of bidirectional resonant converter for Vehicle-to-Grid (V2G) applications
Zahid, Z. U., Dalala, Z. M., & Lai, J. (2014) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2014.7048680 · Cited by 28
Self-citationFully soft-switched bidirectional resonant dc-dc converter with a new CLLC tank
Chen, W., Wang, S. R., Hong, X., et al. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433345 · Cited by 24
Analysis and implementation of a bidirectional ZVS dc-dc converter with active clamp
Lin, B.-R., Chen, J.-J., Lee, Y.-E., & Chiang, H.-K. (2008) · 2008 3rd IEEE Conference on Industrial Electronics and Applications · doi:10.1109/iciea.2008.4582544 · Cited by 19
Cited by
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
He, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Khalid, M. R., Khan, I. A., Hameed, S., Asghar, M. S. J., & Ro, J. (2021) · IEEE Access · doi:10.1109/access.2021.3112189 · Cited by 353
Metadata
- Authors
- Zahid, Z. U., Dalala, Z. M., Chen, R., Chen, B., & Lai, J.-S.
- Venue
- IEEE Transactions on Transportation Electrification
- Published
- 2015-10
- Volume
- 1
- Issue
- 3
- Pages
- 232-244
- ISSN
- 2332-7782 (ISSN-L)
- OpenAlex
- W1898726601
- Cited by
- 359
- References
- 21
- FWCI
- 8.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.