The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Design of Bidirectional DC–DC Resonant Converter for Vehicle-to-Grid (V2G) Applications
Abstract
In this paper, a detailed design procedure is presented for a bidirectional CLLLC-type resonant converter for a battery charging application. This converter is similar to an LLC-type resonant converter with an extra inductor and capacitor in the secondary side. Soft-switching can be ensured in all switches without additional snubber or clamp circuitry. Because of soft-switching in all switches, very high-frequency operation is possible; thus, the size of the magnetics and the filter capacitors can be made small. To reduce the size and cost of the converter, a CLLC-type resonant network is derived from the original CLLLC-type resonant network. First, in this paper, an equivalent model for the bidirectional converter is derived for the steady-state analysis. Then, the design methodology is presented for the CLLLC-type resonant converter. Design of this converter includes determining the transformer turns ratio, design of the magnetizing inductance based on zero-voltage switching condition, design of the resonant inductances and capacitances. Then, the CLLCtype resonant network is derived from the CLLLC-type resonant network. To validate the design procedure, a 3.5-kW converter was designed following the guidelines in the proposed methodology. A prototype was built and tested in the laboratory. Experimental results verified the design procedure presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 1×
“R ECENTLY, electric vehicles (EVs) and plug-in hybrid EVs (PHEVs) have gained popularity because of their advantages, such as more environmentally friendly, less noisy, and more efficient [1].”
BackgroundJung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213346 · Cited by 621
Chen, W., Rong, P., & Lu, Z. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037099 · Cited by 464
High-power density design of a soft-switching high-power bidirectional dc–dc converter
Zhang, J., Lai, J.-S., Kim, R.-Y., & Yu, W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900462 · Cited by 411
Self-citationSingle-Phase On-Board Bidirectional PEV Charger for V2G Reactive Power Operation
Kisacikoglu, M. C., Kesler, M., & Tolbert, L. M. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2360685 · Cited by 381
A Bidirectional LLC Resonant Converter With Automatic Forward and Backward Mode Transition
Jiang, T., Zhang, J., Wu, X., Sheng, K., & Wang, Y. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2307329 · Cited by 264
Modeling and Control of Series–Series Compensated Inductive Power Transfer System
Zahid, Z. U., Dalala, Z. M., Zheng, C., Chen, R., Faraci, W. E., Lai, J.-S. J., Lisi, G., & Anderson, D. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2327959 · Cited by 238
Self-citationReview of high power isolated bi-directional DC-DC converters for PHEV/EV DC charging infrastructure
Du, Y., Lukic, S., Jacobson, B., & Huang, A. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063818 · Cited by 218
High-Efficiency Contactless Power Transfer System for Electric Vehicle Battery Charging Application
Zheng, C., Lai, J., Chen, R., Faraci, E., Zahid, Z. U., Gu, B., Zhang, L., Lisi, G., & Anderson, D. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2339279 · Cited by 184
Self-citationStudy of a non-isolated bidirectional DC–DC converter
Lin, C. ‐., Yang, L. ‐., & Wu, G. W. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0338 · Cited by 180
Cited by
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
He, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Khalid, M. R., Khan, I. A., Hameed, S., Asghar, M. S. J., & Ro, J. (2021) · IEEE Access · doi:10.1109/access.2021.3112189 · Cited by 353
Electric Vehicles Charging Technology Review and Optimal Size Estimation
Brenna, M., Foiadelli, F., Leone, C., & Longo, M. (2020) · Journal of Electrical Engineering & Technology · doi:10.1007/s42835-020-00547-x · Cited by 298
Bidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280
Rafi, M. A. H., & Bauman, J. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3015743 · Cited by 264
Review of power electronics in vehicle-to-grid systems
Sharma, A., & Sharma, S. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.022 · Cited by 261
Rajendran, G., Vaithilingam, C. A., Misron, N., Naidu, K., & Ahmed, M. R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103099 · Cited by 247
A 300-kHz 6.6-kW SiC Bidirectional LLC Onboard Charger
Li, H., Zhang, Z., Wang, S., Tang, J., Ren, X., & Chen, Q. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2910048 · Cited by 237
An Electrolytic Capacitorless Bidirectional EV Charger for V2G and V2H Applications
Kwon, M., & Choi, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2630711 · Cited by 177
A Novel Three-Level CLLC Resonant DC–DC Converter for Bidirectional EV Charger in DC Microgrids
Xuan, Y., Yang, X., Chen, W., Liu, T., & Hao, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972446 · Cited by 156
“Afterward, many research works [23]–[28] have been carried”
BackgroundMin, J., & Ordonez, M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3033982 · Cited by 152
An Isolated/Bidirectional PWM Resonant Converter for V2G(H) EV On-Board Charger
Lee, B.-K., Kim, J.-P., Kim, S.-G., & Lee, J.-Y. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2678532 · Cited by 125
A Critical Review on Charging Technologies of Electric Vehicles
Shahjalal, M., Shams, T., Tasnim, M. N., Ahmed, M. R., Ahsan, M., & Haider, J. (2022) · Energies · doi:10.3390/en15218239 · Cited by 66
“EV penetrations will have severe impacts on the distribution of the grid such as overheating of distribution transformers, voltage fluctuations, and distortion.”
BackgroundLiu, Y.-C., Chen, C., Chen, K.-D., Syu, Y.-L., & Dung, N. A. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953117 · Cited by 61
Design of 1 kW bidirectional half-bridge CLLC converter for electric vehicle charging systems
He, P., & Khaligh, A. (2016) · 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) · doi:10.1109/pedes.2016.7914445 · Cited by 46
3.3kW CLLC converter with synchronous rectification for plug-in electric vehicles
Zou, S., Lu, J., Mallik, A., & Khaligh, A. (2017) · 2017 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.2017.8101708 · Cited by 39
“Thus, CLLC and Dual Active Bridge (DAB) are examined as two most commonly used DC/DC converter topologies for bidirectional EV charger applications [4-6].”
BackgroundA SiC Bidirectional LLC On-Board Charger
Li, H., Wang, S., Zhang, Z., Tang, J., Ren, X., & Chen, Q. (2019) · 2019 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2019.8722324 · Cited by 32
“On the other hand, in order to address the problem of LLC bidirectional operation, by adding an LC pair on the secondary side of an LLC converter, a CLLLC converter is derived [7][8].”
BackgroundModelling of a Two-Stage Bidirectional Ac-Dc Converter Using Wavelet Modulation
Chiu, H. K., Ramasamy, A. K., Tan, N. M. L., & Teow, M. Y. W. (2018) · International Journal of Power Electronics and Drive Systems (IJPEDS) · doi:10.11591/ijpeds.v9.i3.pp1006-1015 · Cited by 1
“Previous studies have shown that half bridge CLLC resonant converters are able to provide high power density, high efficiency, and the additional capacitors in each leg allows reduction of flux imbalance for the transformer [3]-[6].”
Background
Metadata
- Authors
- Zahid, Z. U., Dalala, Z. M., Chen, R., Chen, B., & Lai, J.-S.
- Venue
- IEEE Transactions on Transportation Electrification
- Published
- 2015-10
- Volume
- 1
- Issue
- 3
- Pages
- 232-244
- ISSN
- 2332-7782 (ISSN-L)
- OpenAlex
- W1898726601
- Cited by
- 359
- References
- 21
- FWCI
- 8.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.