The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Processing of MAX phases: From synthesis to applications
Open accessAbstract
MAX phases are a large family of materials with more than 150 different compositions that have been extensively investigated during the last 25 years. They present a layered structure and a unique combination of properties, bridging the gap between metallic and ceramic properties. However, despite their excellent response of some compositions at high temperature—excellent oxidation resistance up to 1400°C under corrosive environment, good damage and radiation tolerance, thermal shock resistance, and self‐crack healing—their transfer to applications has been limited by three main factors: i) complexity of this large family of materials, ii) unavailability of highly pure commercial powders, and iii) extensive time to license products in strategic fields such as nuclear or aviation. In this article, the main properties and synthesis routes are reviewed, including solid state reaction methods, physical vapor deposition (PVD) techniques and molten salt processes. Emphasis is given to processing routes for developing different structures such as dense bulk samples, ceramic matrix composites, foams with different porosity, coatings by PVD and thermal spray technologies, and near net shaping by slip casting, injection molding, and additive manufacturing. Well‐known and novel potential applications are described such as structural materials for high temperature applications, protective coatings and bond‐coats for gas turbines, accident tolerant fuel cladding in nuclear power plants, solar receiver in concentrated solar power systems, electrical contacts, catalyst, and joining material. Finally, high impact investigations and future challenges are listed in order to facilitate the transfer of MAX phases to the market.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Thermal Barrier Coatings for Gas-Turbine Engine Applications
Padture, N. P., Gell, M., & Jordan, E. H. (2002) · Science · doi:10.1126/science.1068609 · Cited by 4,882
The MN+1AXN phases: A new class of solids
Barsoum, M. W. (2000) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(00)00006-6 · Cited by 3,665
Processing Routes to Macroporous Ceramics: A Review
Studart, A. R., Gonzenbach, U. T., Tervoort, E., & Gauckler, L. J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01044.x · Cited by 1,839
Guillon, O., Gonzalez‐Julian, J., Dargatz, B., Kessel, T., Schierning, G., Räthel, J., & Herrmann, M. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201300409 · Cited by 1,403
Self-citationElastic and Mechanical Properties of the MAX Phases
Barsoum, M. W., & Radovic, M. (2011) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-062910-100448 · Cited by 1,250
Structural materials for Gen-IV nuclear reactors: Challenges and opportunities
Murty, K. L., & Charit, I. (2008) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2008.08.044 · Cited by 943
Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field
Kearney, D. W., Herrmann, U., Nava, P., Kelly, B., Mahoney, R., Pacheco, J. E., Cable, R. N., Potrovitza, N., Blake, D., & Price, H. (2003) · Journal of Solar Energy Engineering · doi:10.1115/1.1565087 · Cited by 443
Materials Genome Initiative for Global Competitiveness
Ward, C. (2012) · Advanced Aerospace Materials and Processes Conference and Exposition (AeroMat) · Cited by 407
A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2and Cr2AlC in Air
Tallman, D. J., Anasori, B., & Barsoum, M. W. (2013) · Materials Research Letters · doi:10.1080/21663831.2013.806364 · Cited by 400
El‐Raghy, T., Barsoum, M. W., Zavaliangos, A., & Kalidindi, S. R. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb02167.x · Cited by 392
Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa
Barsoum, M. W., Zhen, T., Kalidindi, S. R., Radovic, M., & Murugaiah, A. (2003) · Nature Materials · doi:10.1038/nmat814 · Cited by 390
High-temperature oxidation and hot corrosion of Cr2AlC
Lin, Z., Li, M. S., Wang, J., & Zhou, Y. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.024 · Cited by 357
Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems—A review
Sommers, A. D., Wang, Q., Han, X., T’Joen, C., Park, Y., & Jacobi, A. M. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.02.018 · Cited by 309
Eklund, P., Rosen, J., & Persson, P. O. Å. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aa57bc · Cited by 298
Fend, T., Hoffschmidt, B., Pitz-Paal, R., Reutter, O., & Rietbrock, P. (2004) · Energy · doi:10.1016/s0360-5442(03)00188-9 · Cited by 268
Oxidation-induced crack healing in Ti3AlC2 ceramics
Song, G. M., Pei, Y. T., Sloof, W. G., Li, S. B., De Hosson, J. T. M., & van der Zwaag, S. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.09.006 · Cited by 264
Multiple crack healing of a Ti2AlC ceramic
Li, S., Song, G., Kwakernaak, K., van der Zwaag, S., & Sloof, W. G. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2012.01.017 · Cited by 219
Kuek, V., Yang, Z., Chim, S. M., Zhu, S., Xu, H., Chow, S. T., Tickner, J., Rosen, V., Erber, W., Li, X., et al. (2016) · Scientific Reports · doi:10.1038/srep37482 · Cited by 202
A conceptual study into the potential of Mn+1AXn-phase ceramics for self-healing of crack damage
Farle, A.-S., Kwakernaak, C., van der Zwaag, S., & Sloof, W. G. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.08.046 · Cited by 185
Ripplocations in van der Waals Layers
Kushima, A., Qian, X., Zhao, P., Zhang, S., & Li, J. (2015) · Nano Letters · doi:10.1021/nl5045082 · Cited by 172
Magnetic MAX phases from theory and experiments; a review
Ingason, A. S., Dahlqvist, M., & Rosén, J. (2016) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/28/43/433003 · Cited by 155
High temperature ion irradiation effects in MAX phase ceramics
Clark, D., Zinkle, S. J., Patel, M., & Parish, C. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.11.055 · Cited by 150
Sloof, W. G., Pei, R., McDonald, S. A., Fife, J. L., Shen, L., Boatemaa, L., Farle, A.-S., Yan, K., Zhang, X., van der Zwaag, S., et al. (2016) · Scientific Reports · doi:10.1038/srep23040 · Cited by 125
Spark plasma sintering and complex shapes: The deformed interfaces approach
Manière, C., Nigito, E., Lise, D., Weibel, A., Beynet, Y., & Estournès, C. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.07.048 · Cited by 106
Reaction synthesis of Ti3SiC2 phase in plasma sprayed coating
Pasumarthi, V., Chen, Y., Bakshi, S. R., & Agarwal, A. K. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.04.079 · Cited by 94
Shell-like nanolayered Nb4AlC3 ceramic with high strength and toughness
Hu, C., Sakka, Y., Grasso, S., Nishimura, T., Guo, S., & Tanaka, H. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.12.045 · Cited by 93
Processing and characterization of porous Ti2AlC with controlled porosity and pore size
Hu, L., Benitez, R., Basu, S., Karaman, İ., & Radović, M. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.07.052 · Cited by 88
Oxygen diffusivity in alumina scales grown on Al-MAX phases
Smialek, J. L. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.11.030 · Cited by 77
Synthesis of high pure Ti3AlC2 and Ti2AlC powders from TiH2 powders as Ti source by tube furnace
Li, L., Zhou, A., Xu, L., Li, Z., & Wang, L. (2013) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-013-0786-2 · Cited by 68
Cold Spraying of Ti2AlC MAX-Phase Coatings
Gutzmann, H., Gärtner, F., Höche, D., Blawert, C., & Klassen, T. (2012) · Journal of Thermal Spray Technology · doi:10.1007/s11666-012-9843-1 · Cited by 65
Oxidation mechanisms in bulk Ti2AlC: Influence of the grain size
Yu, W., Vallet, M., Levraut, B., Gauthier‐Brunet, V., & Dubois, S. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.01.042 · Cited by 60
Bowden, D., Ward, J., Middleburgh, S. C., Shubeita, S. M., Zapata‐Solvas, E., Lapauw, T., Vleugels, J., Lambrinou, K., Lee, W. E., Preuß, M., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.10.049 · Cited by 58
Crack healing behaviour of Cr 2 AlC MAX phase studied by X-ray tomography
Pei, R., McDonald, S. A., Shen, L., van der Zwaag, S., Sloof, W. G., Withers, P. J., & Mummery, P. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.07.018 · Cited by 57
Macro-porous Ti2AlC MAX-phase ceramics by the foam replication method
Bowen, C., & Thomas, T. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.06.038 · Cited by 56
Ougier, M., Michau, A., Lomello, F., Schuster, F., Maskrot, H., & Schlegel, M. L. (2019) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2019.151855 · Cited by 54
Structural Transitions Induced by Ion Irradiation in V 2 AlC and Cr 2 AlC
Wang, C., Yang, T., Xiao, J., Liu, S., Xue, J., Huang, Q., Zhang, J., Wang, J., & Wang, Y. (2016) · Journal of the American Ceramic Society · doi:10.1111/jace.14118 · Cited by 53
Li, J. J., Qian, Y., Niu, D., Zhang, M., Liu, Z., & Li, M. S. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.09.082 · Cited by 52
Thermal conductivity and electrical transport properties of double-A-layer MAX phase Mo 2 Ga 2 C
Jin, S., Su, T., Hu, Q., & Zhou, A. (2020) · Materials Research Letters · doi:10.1080/21663831.2020.1724204 · Cited by 50
The Ti3AlC2 MAX Phase as an Efficient Catalyst for Oxidative Dehydrogenation of n‐Butane
Ng, W., Gnanakumar, E. S., Batyrev, E. D., Sharma, S. K., Pujari, P. K., Greer, H. F., Zhou, W., Sakidja, R., Rothenberg, G., Barsoum, M. W., et al. (2017) · Angewandte Chemie · doi:10.1002/ange.201702196 · Cited by 49
Ti3AlC2 coatings deposited by liquid plasma spraying
Yu, H., Suo, X., Gong, Y., Zhu, Y., Zhou, J., Li, H. L., Eklund, P., & Huang, Q. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.04.076 · Cited by 32
Efficient and cost-effective method to synthesize highly purified Ti4AlN3 and Ti2AlN
Din, M. F. U., Yang, C., Tang, Y., Tian, Y., Luo, Y., Wu, Y., & Que, W. (2019) · Journal of Advanced Dielectrics · doi:10.1142/s2010135x19500085 · Cited by 28
Oxidation and self-healing behaviour of spark plasma sintered Ta 2 AlC
Farle, A., Stikkelman, J., van der Zwaag, S., & Sloof, W. G. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.01.004 · Cited by 26
Hot Corrosion of Na[sub 2]SO[sub 4]-Coated Ti[sub 3]AlC[sub 2] in Air at 700-1000°C
Wang, X. H., & Zhou, Y. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1778171 · Cited by 25
Point contact abrasive wear behavior of MAX phase materials
Qu, L., Bei, G., Nijemeisland, M., Cao, D., van der Zwaag, S., & Sloof, W. G. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.145 · Cited by 22
Electrosynthesis of Ti3AlC2 from oxides/carbon precursor in molten calcium chloride
Li, S., Zou, X., Xiong, X., Zheng, K., Lu, X., Zhou, Z., Xie, X., & Xu, Q. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.342 · Cited by 20
Type II Hot Corrosion Screening Tests of a Cr2AlC MAX Phase Compound
Smialek, J. L., & Gray, S. (2018) · Oxidation of Metals · doi:10.1007/s11085-018-9857-2 · Cited by 18
The influence of the catalyst on the CO formation during catalytic wet peroxide oxidation process
Carbajo, J., Quintanilla, A., García-Costa, A. L., González‐Julián, J., Belmonte, M., Miranzo, P., Osendi, M. I., & Casas, J. A. (2019) · Catalysis Today · doi:10.1016/j.cattod.2019.12.020 · Cited by 16
Synthesis and tribological behavior of novel wear-resistant PEEK–Ti 3 SiC 2 composites
Ghosh, S. K., Dunnigan, R., & Gupta, S. (2016) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650116648868 · Cited by 12
Cited by
MAX phases – Past, present, and future
Dahlqvist, M., Barsoum, M. W., & Rosen, J. (2024) · Materials Today · doi:10.1016/j.mattod.2023.11.010 · Cited by 402
2D metal carbides and nitrides (MXenes) for sensors and biosensors
Alwarappan, S., Nesakumar, N., Sun, D., Hu, T. Y., & Li, C.-Z. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113943 · Cited by 262
Metadata
- Authors
- Gonzalez‐Julian, J.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2020-11-15
- Volume
- 104
- Issue
- 2
- Pages
- 659-690
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W3096399961
- Cited by
- 554
- References
- 51
- FWCI
- 19.86
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.