Unintentional Flow of Alloying Elements in Steel during Recycling of End‐of‐Life Vehicles
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Summary: Alloying elements in steel add a wide range of valuable properties to steel materials that are indispensable for the global economy. However, they are likely to be effectively irretrievably blended into the steel when recycled because of (among other issues) the lack of information about the composition of the scrap. This results in the alloying elements dissipating in slag during steelmaking and/or becoming contaminants in secondary steel. We used the waste input‐output material flow analysis model to quantify the unintentional flows of alloying elements (i.e., chromium, nickel, and molybdenum) that occur in steel materials and that result from mixing during end‐of‐life (EOL) processes. The model can be used to predict in detail the flows of ferrous materials in various phases, including the recycling phase by extending steel, alloying element source, and iron and steel scrap sectors. Application of the model to Japanese data indicates the critical importance of the recycling of EOL vehicles (ELVs) in Japan because passenger cars are the final destination of the largest share of these alloying elements. However, the contents of alloying elements are rarely considered in current ELV recycling. Consequently, the present study demonstrates that considerable amounts of alloying elements, which correspond to 7% to 8% of the annual consumption in electric arc furnace (EAF) steelmaking, are unintentionally introduced into EAFs. This result suggests the importance of quality‐based scrap recycling for efficient management of alloying elements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nakamura, S., Kondo, Y., Matsubae, K., Nakajima, K., Tasaki, T., & Nagasaka, T. (2012) · Environmental Science & Technology · doi:10.1021/es3013529 · Cited by 95 · cited 11×
“The recycling of motor vehicles has long been of great concern in industrial ecology (Castro et al. 2004; Amini et al. 2007; Froelich et al. 2007; Nakamura et al. 2012).”
BackgroundMethodInfluentialSelf-citationNakajima, K., Ohno, H., Kondo, Y., Matsubae, K., Takeda, O., Miki, T., Nakamura, S., & Nagasaka, T. (2013) · Environmental Science & Technology · doi:10.1021/es3043559 · Cited by 95
Self-citation
Cited by
Application of superhydrophobic coatings as a corrosion barrier: A review
Vazirinasab, E., Jafari, R., & Momen, G. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.11.053 · Cited by 659
Pauliuk, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.019 · Cited by 554
Haupt, M., Vadenbo, C., & Hellweg, S. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12506 · Cited by 345
How Will Copper Contamination Constrain Future Global Steel Recycling?
Daehn, K. E., Cabrera Serrenho, A., & Allwood, J. M. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b00997 · Cited by 242
Reshaping global policies for circular economy
Zeng, X., Ogunseitan, O. A., Nakamura, S., Suh, S., Kral, U., Li, J., & Geng, Y. (2022) · Circular Economy · doi:10.1016/j.cec.2022.100003 · Cited by 107
Self-citation
Metadata
- Authors
- Ohno, H., Matsubae, K., Nakajima, K., Nakamura, S., & Nagasaka, T.
- Venue
- Journal of Industrial Ecology
- Published
- 2014-01-25
- Volume
- 18
- Issue
- 2
- Pages
- 242-253
- ISSN
- 1088-1980 (ISSN-L)
- 1530-9290
- OpenAlex
- W1480819809
- Cited by
- 100
- References
- 2
- FWCI
- 17.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Unintentional Flow of Alloying Elements in Steel during Recycling of End‐of‐Life Vehicles. https://app.cochat.ai/papers/10.1111/jiec.12095
- The paper
- Ohno, H., Matsubae, K., Nakajima, K., Nakamura, S., & Nagasaka, T. (2014). Unintentional Flow of Alloying Elements in Steel during Recycling of End‐of‐Life Vehicles. Journal of Industrial Ecology. https://doi.org/10.1111/jiec.12095
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.