The DOI matches its Crossref record.
Vickers Indentation Curves of Magnesium Oxide (MgO)
Abstract
Studies of Vickers hardness of magnesium oxide are presented in the literature for three purposes. They give information about relations between hardness and brittleness, (plasticity and toughness behavior); they show the anisotropical effect of the structure of the material and they are a tool to study the chemomechanical effects (Rebinder effects). Generally, the Vickers hardness is evaluated by measurements of the diagonals of residual indentation. Equipment was built which gives a record of the applied depression depth (h) as a function of the carried load P (in the range 10−1 N to 10+1 N). Investigation of the curves P(h) during loading and unloading and microscopical observations of residual indentation show that phenomena are complex. The contact is elastoplastic. The roles played by the plasticity and elasticity are discussed. The physical meaning of Vickers hardness, determined by use of residual indentation measurements, is analyzed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Oliver, W. C., & Pharr, G. M. (2004) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2004.0002 · Cited by 8,190
A method for interpreting the data from depth-sensing indentation instruments
Doerner, M. F., & Nix, W. D. (1986) · Journal of Materials Research · doi:10.1557/jmr.1986.0601 · Cited by 2,863
Mechanical properties of thin films
Nix, W. D. (1989) · Metallurgical Transactions A · doi:10.1007/bf02666659 · Cited by 2,546
Pharr, G. M., Oliver, W. C., & Brotzen, F. R. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.0613 · Cited by 1,562
Zirconates as New Materials for Thermal Barrier Coatings
Vassen, R., Cao, X., Tietz, F., Basu, D., & Stöver, D. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01506.x · Cited by 1,393
Measurement of mechanical properties by ultra-low load indentation
Pharr, G. M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(98)00724-2 · Cited by 1,088
Scaling, dimensional analysis, and indentation measurements
Cheng, Y.-T., & Cheng, C.-M. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.05.001 · Cited by 1,061
Measurement of Thin Film Mechanical Properties Using Nanoindentation
Pharr, G. M., & Oliver, W. C. (1992) · MRS Bulletin · doi:10.1557/s0883769400041634 · Cited by 1,012
Elastic analysis of some punch problems for a layered medium
King, R. B. (1987) · International Journal of Solids and Structures · doi:10.1016/0020-7683(87)90116-8 · Cited by 898
Nano-indentation of polymeric surfaces
Briscoe, B. J., Fiori, L., & Pelillo, E. (1998) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/31/19/006 · Cited by 760
In vivo measurements of the elastic mechanical properties of human skin by indentation tests
Pailler-Mattei, C., Bec, S., & Zahouani, H. (2008) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2007.06.011 · Cited by 724
Stresses and deformation processes in thin films on substrates
Doerner, M. F., & Nix, W. D. (1988) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408438808243734 · Cited by 617
Elastic contact versus indentation modeling of multi-layered materials
Huajian, G., Cheng-Hsin, C., & Jin, L. (1992) · International Journal of Solids and Structures · doi:10.1016/0020-7683(92)90004-d · Cited by 472
Metadata
- Authors
- Loubet, J. L., Georges, J. M., Marchesini, O., & Meille, G.
- Venue
- Journal of Tribology
- Publisher
- ASME International
- Published
- 1984-01-01
- Volume
- 106
- Issue
- 1
- Pages
- 43-48
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W1978991802
- Cited by
- 421
- References
- 0
- FWCI
- 8.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.