The DOI matches its Crossref record.
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results
Abstract
Utilizing the theory developed by the authors in an earlier publication, the influence of the ellipticity parameter, the dimensionless speed, load, and material parameters on minimum film thickness was investigated. The ellipticity parameter was varied from one (a ball on a plate configuration) to eight (a configuration approaching a line contact). The dimensionless speed parameter was varied over a range of nearly two orders of magnitude. The dimensionless load parameter was varied over a range of one order of magnitude. Conditions corresponding to the use of solid materials of bronze, steel, and silicon nitride and lubricants of paraffinic and naphthenic mineral oils were considered in obtaining the exponent in the dimensionless material parameter. Thirty-four different cases were used in obtaining the minimum film thickness formula given below as H¯min=3.63U0.68G0.49W−0.073(1−e−0.68k) A simplified expression for the ellipticity parameter was found where k=1.03RyRx0.64 Contour plots were also shown which indicate in detail the pressure spike and two side lobes in which the minimum film thickness occurs. These theoretical solutions of film thickness have all the essential features of the previously reported experimental observations based upon optical interferometry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Review of Ionic Liquid Lubricants
Somers, A., Howlett, P., MacFarlane, D., & Forsyth, M. (2013) · Lubricants · doi:10.3390/lubricants1010003 · Cited by 605
Luo, J., Wen, S., & Huang, P. (1996) · Wear · doi:10.1016/0043-1648(95)06799-x · Cited by 298
A Review of Elasto-Hydrodynamic Lubrication Theory
Lugt, P. M., & Morales-Espejel, G. E. (2011) · Tribology Transactions · doi:10.1080/10402004.2010.551804 · Cited by 260
Marian, M., Bartz, M., Wartzack, S., & Rosenkranz, A. (2020) · Lubricants · doi:10.3390/lubricants8100095 · Cited by 92
Elastohydrodynamic Lubrication of Line Contacts
Hamrock, B. J., & Jacobson, B. O. (1984) · A S L E Transactions · doi:10.1080/05698198408981572 · Cited by 85
Self-citationA Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears
Wu, S., & Cheng, H. S. (1991) · Tribology Transactions · doi:10.1080/10402009108982050 · Cited by 83
Marian, M., Grützmacher, P., Rosenkranz, A., Tremmel, S., Mücklich, F., & Wartzack, S. (2019) · Tribology International · doi:10.1016/j.triboint.2019.03.052 · Cited by 78
van Leeuwen, H. (2009) · Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · doi:10.1243/13506501jet504 · Cited by 77
Predicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
Hydrodynamic force and moment in pure rolling lubricated contacts. Part 2: Point contacts
Biboulet, N., & Houpert, L. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet791 · Cited by 51
Hydrodynamic force and moment in pure rolling lubricated contacts. Part 1: Line contacts
Biboulet, N., & Houpert, L. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet790 · Cited by 45
Artificial neural network approach to predict the lubricated friction coefficient
Echávarri Otero, J., de la Guerra Ochoa, E., Chacón Tanarro, E., Lafont Morgado, P., Díaz Lantada, A., Munoz‐Guijosa, J. M., & Muñoz Sanz, J. L. (2014) · Lubrication Science · doi:10.1002/ls.1238 · Cited by 32
Machine Learning for Film Thickness Prediction in Elastohydrodynamic Lubricated Elliptical Contacts
Issa, J., El Hajj, A., Vergne, P., & Habchi, W. (2023) · Lubricants · doi:10.3390/lubricants11120497 · Cited by 30
Gonda, A., Paulus, S., Graf, S., Koch, O., Götz, S., & Sauer, B. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109354 · Cited by 23
Kelley, J., Schneider, V., Poll, G., & Marian, M. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109988 · Cited by 20
Wolf, M., Solovyev, S., & Arshia, F. (2022) · Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · doi:10.1177/13506501211047756 · Cited by 6
Metadata
- Authors
- Hamrock, B. J., & Dowson, D.
- Venue
- Journal of Lubrication Technology
- Publisher
- ASME International
- Published
- 1977-04-01
- Volume
- 99
- Issue
- 2
- Pages
- 264-275
- ISSN
- 0022-2305 (ISSN-L)
- OpenAlex
- W2110916489
- Cited by
- 1,183
- References
- 0
- FWCI
- 7.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.