The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
Extreme ultraviolet lithography: A review
Abstract
Extreme ultraviolet lithography (EUVL) was thoroughly reviewed over a broad range of topics, including history, tools, source, metrology, condenser and projection optics, resists, and masks. Since 1988, many studies on EUVL have been conducted in North America, Europe, and Japan, through state sponsored programs and industrial consortiums. To date, no “show stopper” has been identified, but challenges are present in almost all aspects of EUVL technology. Commercial alpha lithography step-and-scan tools are installed with full-field capability; however, EUVL power at intermediate focus (IF) has not yet met volume manufacturing requirements. Compared with the target of 180W IF power, current tools can supply only approximately 55–62W. EUV IF power has been improved gradually from xenon- to tin-discharge-produced plasma or laser-produced plasma. EUVL resist has improved significantly in the last few years, with 25nm 1:1 line/space resolution being produced with approximately 2.7nm (3σ) line edge roughness. Actual adoption of EUVL will depend on the extension of current optical lithography, such as 193nm immersion lithography, combined with double patterning techniques. Mask fabrication and application technologies may be the most substantial challenges. Creating a defect-free EUVL mask is currently an obstacle to its application, although a combination of removable pellicle and thermophoretic protection may overcome nonpellicle challenge. Cost of ownership is a critical consideration for EUVL; nevertheless, it has been predicted that EUVL may be in pilot production at 32nm and in large-scale production at 22nm with the capability to extend to the next technology node.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The tension of metallic films deposited by electrolysis
Stoney, G. G. (1909) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1909.0021 · Cited by 4,872
Soft x-ray reduction lithography using multilayer mirrors
Kinoshita, H., Kurihara, K., Ishii, Y., & Torii, Y. (1989) · Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena · doi:10.1116/1.584507 · Cited by 270
Reduction imaging at 14 nm using multilayer-coated optics: Printing of features smaller than 0.1 μm
Bjorkholm, J. E., Bokor, J., Eichner, L., Freeman, R. R., Gregus, J., Jewell, T. E., Mansfield, W. M., Mac Dowell, A. A., Raab, E. L., Silfvast, W. T., et al. (1990) · Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena · doi:10.1116/1.585106 · Cited by 161
Shot noise, LER, and quantum efficiency of EUV photoresists
Brainard, R. L., Trefonas, P., Lammers, J. H., Cutler, C. A., Mackevich, J. F., Trefonas, A., & Robertson, S. A. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.536411 · Cited by 149
Soft x-ray projection lithography using an x-ray reduction camera
Hawryluk, A. M., & Seppala, L. G. (1988) · Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena · doi:10.1116/1.584107 · Cited by 125
Plasma sources for EUV lithography exposure tools
Banine, V., & Moors, R. (2004) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/37/23/001 · Cited by 101
Extreme ultraviolet lithography: overview and development status
Silverman, P. J. (2005) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.1862647 · Cited by 91
Comparison of resist collapse properties for deep ultraviolet and 193 nm resist platforms
Cao, H. B., Nealey, P. F., & Domke, W. (2000) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1321280 · Cited by 88
First performance results of the ASML alpha demo tool
Meiling, H., Meijer, H., Banine, V., Moors, R., Groeneveld, R., Voorma, H.-J., Mickan, U., Wolschrijn, B., Mertens, B., van Baars, G., et al. (2006) · SPIE Proceedings · doi:10.1117/12.657348 · Cited by 79
Yoshimoto, K., Stoykovich, M. P., Cao, H. B., de Pablo, J. J., Nealey, P. F., & Drugan, W. J. (2004) · Journal of Applied Physics · doi:10.1063/1.1768614 · Cited by 66
Cited by
Block copolymer based nanostructures: Materials, processes, and applications to electronics
Kim, H.-C., Park, S.-M., & Hinsberg, W. D. (2010) · Chemical Reviews · doi:10.1021/cr900159v · Cited by 1,017
Laser-driven nonlinear cluster dynamics
Fennel, T., Meiwes-Broer, K.-H., Tiggesbäumker, J., Reinhard, P.-G., Dinh, P. M., & Suraud, E. (2010) · Reviews of Modern Physics · doi:10.1103/revmodphys.82.1793 · Cited by 427
Advances in Patterning Materials for 193 nm Immersion Lithography
Sanders, D. P. (2010) · Chemical Reviews · doi:10.1021/cr900244n · Cited by 290
Evolution in Lithography Techniques: Microlithography to Nanolithography
Sharma, E., Rathi, R., Misharwal, J., Sinhmar, B., Kumari, S., Dalal, J., & Kumar, A. (2022) · Nanomaterials · doi:10.3390/nano12162754 · Cited by 257
Self-citationRahman, F., Carbaugh, D. J., Wright, J. T., Rajan, P., Pandya, S. G., & Kaya, S. (2020) · Microelectronic Engineering · doi:10.1016/j.mee.2020.111238 · Cited by 79
Metadata
- Authors
- Wu, B., & Kumar, A.
- Venue
- Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 2007-10-11
- Volume
- 25
- Issue
- 6
- Pages
- 1743-1761
- ISSN
- 1071-1023 (ISSN-L)
- 1520-8567
- OpenAlex
- W1995660891
- Cited by
- 400
- References
- 62
- FWCI
- 18.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extreme ultraviolet lithography: A review. https://app.cochat.ai/papers/10.1116/1.2794048
- The paper
- Wu, B., & Kumar, A. (2007). Extreme ultraviolet lithography: A review. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena. https://doi.org/10.1116/1.2794048
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.