The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
Extreme ultraviolet lithography: A review
Abstract
Extreme ultraviolet lithography (EUVL) was thoroughly reviewed over a broad range of topics, including history, tools, source, metrology, condenser and projection optics, resists, and masks. Since 1988, many studies on EUVL have been conducted in North America, Europe, and Japan, through state sponsored programs and industrial consortiums. To date, no “show stopper” has been identified, but challenges are present in almost all aspects of EUVL technology. Commercial alpha lithography step-and-scan tools are installed with full-field capability; however, EUVL power at intermediate focus (IF) has not yet met volume manufacturing requirements. Compared with the target of 180W IF power, current tools can supply only approximately 55–62W. EUV IF power has been improved gradually from xenon- to tin-discharge-produced plasma or laser-produced plasma. EUVL resist has improved significantly in the last few years, with 25nm 1:1 line/space resolution being produced with approximately 2.7nm (3σ) line edge roughness. Actual adoption of EUVL will depend on the extension of current optical lithography, such as 193nm immersion lithography, combined with double patterning techniques. Mask fabrication and application technologies may be the most substantial challenges. Creating a defect-free EUVL mask is currently an obstacle to its application, although a combination of removable pellicle and thermophoretic protection may overcome nonpellicle challenge. Cost of ownership is a critical consideration for EUVL; nevertheless, it has been predicted that EUVL may be in pilot production at 32nm and in large-scale production at 22nm with the capability to extend to the next technology node.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The tension of metallic films deposited by electrolysis
Stoney, G. G. (1909) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1909.0021 · Cited by 4,872
Soft x-ray reduction lithography using multilayer mirrors
Kinoshita, H., Kurihara, K., Ishii, Y., & Torii, Y. (1989) · Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena · doi:10.1116/1.584507 · Cited by 270
Reduction imaging at 14 nm using multilayer-coated optics: Printing of features smaller than 0.1 μm
Bjorkholm, J. E., Bokor, J., Eichner, L., Freeman, R. R., Gregus, J., Jewell, T. E., Mansfield, W. M., Mac Dowell, A. A., Raab, E. L., Silfvast, W. T., et al. (1990) · Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena · doi:10.1116/1.585106 · Cited by 161
Shot noise, LER, and quantum efficiency of EUV photoresists
Brainard, R. L., Trefonas, P., Lammers, J. H., Cutler, C. A., Mackevich, J. F., Trefonas, A., & Robertson, S. A. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.536411 · Cited by 149
Soft x-ray projection lithography using an x-ray reduction camera
Hawryluk, A. M., & Seppala, L. G. (1988) · Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena · doi:10.1116/1.584107 · Cited by 125
Plasma sources for EUV lithography exposure tools
Banine, V., & Moors, R. (2004) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/37/23/001 · Cited by 101
Comparison of resist collapse properties for deep ultraviolet and 193 nm resist platforms
Cao, H. B., Nealey, P. F., & Domke, W. (2000) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1321280 · Cited by 99
Extreme ultraviolet lithography: overview and development status
Silverman, P. J. (2005) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.1862647 · Cited by 91
First performance results of the ASML alpha demo tool
Meiling, H., Meijer, H., Banine, V., Moors, R., Groeneveld, R., Voorma, H.-J., Mickan, U., Wolschrijn, B., Mertens, B., van Baars, G., et al. (2006) · SPIE Proceedings · doi:10.1117/12.657348 · Cited by 79
Yoshimoto, K., Stoykovich, M. P., Cao, H. B., de Pablo, J. J., Nealey, P. F., & Drugan, W. J. (2004) · Journal of Applied Physics · doi:10.1063/1.1768614 · Cited by 66
Review of progress in extreme ultraviolet lithography masks
Hector, S. D., & Mangat, P. (2001) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1408957 · Cited by 50
EUV lithography with the Alpha Demo Tools: status and challenges
Harned, N., Goethals, M., Groeneveld, R. H. M., Kuerz, P., Lowisch, M., Meijer, H., Meiling, H., Ronse, K. G., Ryan, J., Tittnich, M., et al. (2007) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.712065 · Cited by 48
Over, H., He, Y., Farkas, A., Mellau, G. C., Korte, C., Knapp, M., Chandhok, M., & Fang, M. (2007) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.2743648 · Cited by 46
Diffraction-limited soft-x-ray projection imaging using a laser plasma source
Tichenor, D. A., Freeman, R. R., Bokor, J., et al. (1991) · Optics Letters · doi:10.1364/ol.16.001557 · Cited by 44
Undulator radiation for at-wavelength interferometry of optics for extreme-ultraviolet lithography
Attwood, D. T., Sommargren, G. E., Beguiristain, R., et al. (1993) · Applied Optics · doi:10.1364/ao.32.007022 · Cited by 43
System integration and performance of the EUV engineering test stand
Tichenor, D. A., Ray-Chaudhuri, A. K., Replogle, W. C., Stulen, R. H., Kubiak, G. D., Rockett, P. D., Klebanoff, L. E., Jefferson, K. J., Leung, A. H., Wronosky, J. B., et al. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.436665 · Cited by 41
Design and performance of capping layers for EUV multilayer mirrors
Bajt, S., Chapman, H. N., Nguyen, N. Q., Alameda, J. B., Robinson, J. C., Malinowski, M. E., Gullikson, E. M., Aquila, A., Tarrio, C., & Grantham, S. (2003) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.484966 · Cited by 41
High-resolution EUV imaging tools for resist exposure and aerial image monitoring
Booth, M., Brisco, O., Brunton, A., Cashmore, J., Elbourn, P., Elliner, G., Gower, M., Greuters, J., Grunewald, P., Gutierrez, R., et al. (2005) · SPIE Proceedings · doi:10.1117/12.606715 · Cited by 39
Lithographic performance of high-numerical-aperture (NA=0.3) EUV small-field exposure tool (HINA)
Oizumi, H., Tanaka, Y., Kumasaka, F., Nishiyama, I., Kondo, H., Shiraishi, M., Oshino, T., Sugisaki, K., & Murakami, K. (2005) · SPIE Proceedings · doi:10.1117/12.599435 · Cited by 37
Haga, T., Takenaka, H., & Fukuda, M. (2000) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1319702 · Cited by 35
Nikon EUVL development progress summary
Miura, T., Murakami, K., Suzuki, K., Kohama, Y., Ohkubo, Y., & Asami, T. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.656243 · Cited by 34
TaN EUVL mask fabrication and characterization
Yan, P.-Y., Zhang, G., Ma, A. K., & Liang, T. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.436668 · Cited by 33
Chemically amplified resists resolving 25 nm 1:1 line: space features with EUV lithography
Thackeray, J. W., Nassar, R. A., Brainard, R. L., Goldfarb, D. L., Wallow, T. I., Wei, Y., Mackey, J., Naulleau, P. P., Pierson, B., & Solak, H. H. (2007) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.712981 · Cited by 31
Progress of the EUVL alpha tool
Meiling, H., Benschop, J. P. H., Dinger, U., & Kuerz, P. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.436675 · Cited by 31
Photoresist film thickness for extreme ultraviolet lithography
Dentinger, P. M., Cardinale, G. F., Henderson, C. C., Fisher, A. C., & Ray-Chaudhuri, A. K. (2000) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.390098 · Cited by 28
EUV mask absorber characterization and selection
Yan, P.-Y., Zhang, G., Kofron, P., Powers, J. E., Tran, M., Liang, T., Stivers, A. R., & Lo, F.-C. (2000) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.392025 · Cited by 26
Sources of line-width roughness for EUV resists
Cao, H. B., Yueh, W., Rice, B. J., Roberts, J. M., Bacuita, T., & Chandhok, M. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.536041 · Cited by 22
Quantification of EUV resist outgassing
Yueh, W., Cao, H. B., Thirumala, V., et al. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.600540 · Cited by 22
Developing a viable multilayer coating process for extreme ultraviolet lithography reticles
Mirkarimi, P. B., Spiller, E. A., Baker, S. L., Sperry, V. R., Stearns, D. G., & Gullikson, E. M. (2004) · Journal of Micro/Nanopatterning Materials and Metrology · doi:10.1117/1.1631006 · Cited by 22
Initial results from the EUV engineering test stand
Tichenor, D. A., Ray-Chaudhuri, A. K., Lee, S. H., Chapman, H. N., Replogle, W. C., Berger, K. W., Stulen, R. H., Kubiak, G. D., Klebanoff, L. E., Wronosky, J. B., et al. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.450953 · Cited by 21
Progress in the ASML EUV program
Meiling, H., Banine, V., Kuerz, P., et al. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.534784 · Cited by 21
Ultrathin photoresists for EUV lithography
Rao, V., Cobb, J. L., Henderson, C. C., Okoroanyanwu, U., Bozman, D. R., Mangat, P. J. S., Brainard, R. L., & Mackevich, J. F. (1999) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.351135 · Cited by 20
Chandhok, M., Lee, S. H., Krautschik, C. G., Rice, B. J., Panning, E. M., Goldstein, M., & Shell, M. K. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.536024 · Cited by 20
EUV substrate and blank inspection with confocal microscopy
Urbach, J.-P., Cavelaars, J., Kusunose, H., Liang, T., & Stivers, A. R. (2003) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.518388 · Cited by 20
13-nm extreme ultraviolet lithography
Stulen, R. H. (1995) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/2944.473686 · Cited by 20
Han, S.-I., Weisbrod, E., Xie, Q., Mangat, P. J. S., Hector, S. D., & Dauksher, W. J. (2003) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.484731 · Cited by 18
EUV mask fabrication with Cr absorber
Mangat, P. J. S., Hector, S. D., Rose, S., Cardinale, G. F., Tejnil, E., & Stivers, A. R. (2000) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.390099 · Cited by 16
Han, S.-I., Wasson, J. R., Mangat, P. J. S., Cobb, J. L., Lucas, K. D., & Hector, S. D. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.472324 · Cited by 16
High-temperature stability multilayers for extreme-ultraviolet condenser optics
Bajt, S., & Stearns, D. G. (2005) · Applied Optics · doi:10.1364/ao.44.007735 · Cited by 16
Phase-shift mask for EUV lithography
Constancias, C., Richard, M., Joyeux, D., Chiaroni, J., Blanc, R., Robic, J. Y., Quesnel, E., & Muffato, V. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.655583 · Cited by 15
Tejnil, E., Gullikson, E. M., & Stivers, A. R. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.569849 · Cited by 15
Advances in low-defect multilayers for EUVL mask blanks
Folta, J. A., Davidson, J., Larson, C. C., Walton, C. C., & Kearney, P. A. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.472287 · Cited by 12
Novel resists with nontraditional compositions for EUV lithography
Dai, J. Y., & Ober, C. K. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.534319 · Cited by 12
TaN-based EUV mask absorber etch study
Du, Y., Choi, C. J., Zhang, G., Park, S.-J., Yan, P.-Y., & Baik, K. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.681832 · Cited by 11
Characterization of flare on Intel"s EUV MET
Lee, S. H., Chandhok, M., Roberts, J. M., & Rice, B. J. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.600154 · Cited by 11
Synthesis and evaluation of novel organoelement resists for EUV lithography
Dai, J. Y., Ober, C. K., Kim, S.-O., et al. (2003) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.485116 · Cited by 10
Progress towards the development of a commercial tool and process for EUVL mask blanks
Ma, A. K., Kearney, P. A., Krick, D., Randive, R. V., Reiss, I., Mirkarimi, P. B., & Spiller, E. A. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.599936 · Cited by 10
Characteristics of the Ru buffer layer for EUVL mask patterning
Lee, B. T., Hoshino, E., Takahashi, M., Yoneda, T., Yamanashi, H., Hoko, H., Chibá, A., Ito, M., Ryoo, M.-H., Ogawa, T., et al. (2001) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.436699 · Cited by 10
Demonstration of phase-shift masks for extreme-ultraviolet lithography
Fontaine, B. L., Pawloski, A. R., Wood, O. R., et al. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.652212 · Cited by 10
Organoelement resists for EUV lithography
Dai, J. Y., Ober, C. K., Wang, L., et al. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.474197 · Cited by 9
Multilayer coatings for the EUVL process development tool
Louis, E., Zoethout, E., van de Kruijs, R. W. E., Nedelcu, I., Yakshin, A., van der Westen, S. A., Tsarfati, T., Bijkerk, F., Enkisch, H., & Muellender, S. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.619856 · Cited by 9
Molecular glass resists for EUV lithography
Silva, A. D., Forman, D. C., & Ober, C. K. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.656559 · Cited by 9
Flare and lens aberration requirements for EUV lithographic tools
Lee, S. H., Shroff, Y. A., & Chandhok, M. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.604870 · Cited by 8
Enhanced performance of EUV multilayer coatings
Louis, E., Yakshin, A., Zoethout, E., van de Kruijs, R. W. E., Nedelcu, I., van der Westen, S. A., Tsarfati, T., Bijkerk, F., Enkisch, H., Müllender, S., et al. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.616902 · Cited by 7
Actinic EUVL mask blank defect inspection by EUV photoelectron microscopy
Kleineberg, U., Lin, J., Neuhäusler, U., Slieh, J., Heinzmann, U., Weber, N. B., Escher, M., Merkel, M., Oelsner, A., Valsaitsev, D., et al. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.659812 · Cited by 7
Silicon backbone polymers as EUV resists
Bravo-Vasquez, J. P., Kwark, Y., Ober, C. K., et al. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.536438 · Cited by 7
EUV multilayer mirrors with enhanced stability
Benoit, N., Yulin, S. A., Feigl, T., & Kaiser, N. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.680719 · Cited by 6
Subatomic accuracy in EUVL multilayer coatings
Zoethout, E., Suter, P., van de Kruijs, R. W. E., Yakshin, A., Louis, E., Bijkerk, F., Enkisch, H., & Muellender, S. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.561319 · Cited by 5
Defect inspection of EUV mask blank using confocal microscopy: simulation and experiment
Kim, S.-S., Park, J., Chalykh, R., Kang, J., Lee, S., Woo, S.-G., Cho, H.-K., & Moon, J.-T. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.656221 · Cited by 5
Niibe, M., Watanabe, T., Nii, H., et al. (2000) · Japanese Journal of Applied Physics · doi:10.1143/jjap.39.6815 · Cited by 4
Resist-based measurement of the contrast transfer function in a 0.3-NA EUV microfield optic
Cain, J. P., Naulleau, P. P., & Spanos, C. J. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.600427 · Cited by 3
Single-layer and bilayer resist processes for EUV-type integrations
Peters, R. D., Parker, C., Cobb, J. L., Luckowski, E., Weisbrod, E., & Dauksher, B. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.535643 · Cited by 2
Cited by
Block copolymer based nanostructures: Materials, processes, and applications to electronics
Kim, H.-C., Park, S.-M., & Hinsberg, W. D. (2010) · Chemical Reviews · doi:10.1021/cr900159v · Cited by 1,017
X-Rays and Extreme Ultraviolet Radiation: Principles and Applications
Attwood, D., & Sakdinawat, A. (2016) · CERN Document Server (European Organization for Nuclear Research) · doi:10.1017/cbo9781107477629 · Cited by 644
Laser-driven nonlinear cluster dynamics
Fennel, T., Meiwes-Broer, K.-H., Tiggesbäumker, J., Reinhard, P.-G., Dinh, P. M., & Suraud, E. (2010) · Reviews of Modern Physics · doi:10.1103/revmodphys.82.1793 · Cited by 427
Advances in Patterning Materials for 193 nm Immersion Lithography
Sanders, D. P. (2010) · Chemical Reviews · doi:10.1021/cr900244n · Cited by 290
Functional Materials for Two‐Photon Polymerization in Microfabrication
Carlotti, M., & Mattoli, V. (2019) · Small · doi:10.1002/smll.201902687 · Cited by 260
Metadata
- Authors
- Wu, B., & Kumar, A.
- Venue
- Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 2007-10-11
- Volume
- 25
- Issue
- 6
- Pages
- 1743-1761
- ISSN
- 1071-1023 (ISSN-L)
- 1520-8567
- OpenAlex
- W1995660891
- Cited by
- 400
- References
- 62
- FWCI
- 18.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.